[dpdk-dev] [dpdk-dev v7 3/3] app/testpmd: add new types to RSS hash commands

Iremonger, Bernard bernard.iremonger at intel.com
Tue Apr 21 11:44:58 CEST 2020


Hi Jeff,

> -----Original Message-----
> From: Guo, Jia <jia.guo at intel.com>
> Sent: Friday, April 17, 2020 7:32 PM
> To: Iremonger, Bernard <bernard.iremonger at intel.com>;
> orika at mellanox.com; Ye, Xiaolong <xiaolong.ye at intel.com>; Zhang, Qi Z
> <qi.z.zhang at intel.com>
> Cc: dev at dpdk.org; Wu, Jingjing <jingjing.wu at intel.com>; Cao, Yahui
> <yahui.cao at intel.com>; Su, Simei <simei.su at intel.com>; Guo, Jia
> <jia.guo at intel.com>
> Subject: [dpdk-dev v7 3/3] app/testpmd: add new types to RSS hash
> commands
> 
> Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
> l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used to
> configure these rss input set by cmdline.
> 
> Example flow commands was:
> testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
> 	actions rss types l2tpv3 end key_len 0 queues end / end
> 
> port config commands was:
> testpmd>port config all rss l2tpv3
> 
> Signed-off-by: Jeff Guo <jia.guo at intel.com>
> ---
> v7->v6:
> add missing type
> add change in doc for port rss configure
> ---
>  app/test-pmd/cmdline.c                      | 34 +++++++++++++++++----
>  app/test-pmd/config.c                       | 14 +++++++--
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
>  3 files changed, 40 insertions(+), 10 deletions(-)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> 982322c35..97cf6ee35 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -2270,9 +2270,14 @@ cmd_config_rss_parsed(void *parsed_result,
>  	int ret;
> 
>  	if (!strcmp(res->value, "all"))
> -		rss_conf.rss_hf = ETH_RSS_IP | ETH_RSS_TCP |
> -				ETH_RSS_UDP | ETH_RSS_SCTP |
> -					ETH_RSS_L2_PAYLOAD;
> +		rss_conf.rss_hf = ETH_RSS_ETH | ETH_RSS_VLAN |
> ETH_RSS_IP |
> +			ETH_RSS_TCP | ETH_RSS_UDP | ETH_RSS_SCTP |
> +			ETH_RSS_L2_PAYLOAD | ETH_RSS_L2TPV3 |
> ETH_RSS_ESP |
> +			ETH_RSS_AH | ETH_RSS_PFCP;
> +	else if (!strcmp(res->value, "eth"))
> +		rss_conf.rss_hf = ETH_RSS_ETH;
> +	else if (!strcmp(res->value, "vlan"))
> +		rss_conf.rss_hf = ETH_RSS_VLAN;
>  	else if (!strcmp(res->value, "ip"))
>  		rss_conf.rss_hf = ETH_RSS_IP;
>  	else if (!strcmp(res->value, "udp"))
> @@ -2299,6 +2304,18 @@ cmd_config_rss_parsed(void *parsed_result,
>  		rss_conf.rss_hf = ETH_RSS_L4_SRC_ONLY;
>  	else if (!strcmp(res->value, "l4-dst-only"))
>  		rss_conf.rss_hf = ETH_RSS_L4_DST_ONLY;
> +	else if (!strcmp(res->value, "l2-src-only"))
> +		rss_conf.rss_hf = ETH_RSS_L2_SRC_ONLY;
> +	else if (!strcmp(res->value, "l2-dst-only"))
> +		rss_conf.rss_hf = ETH_RSS_L2_DST_ONLY;
> +	else if (!strcmp(res->value, "l2tpv3"))
> +		rss_conf.rss_hf = ETH_RSS_L2TPV3;
> +	else if (!strcmp(res->value, "esp"))
> +		rss_conf.rss_hf = ETH_RSS_ESP;
> +	else if (!strcmp(res->value, "ah"))
> +		rss_conf.rss_hf = ETH_RSS_AH;
> +	else if (!strcmp(res->value, "pfcp"))
> +		rss_conf.rss_hf = ETH_RSS_PFCP;
>  	else if (!strcmp(res->value, "none"))
>  		rss_conf.rss_hf = 0;
>  	else if (!strcmp(res->value, "default")) @@ -2359,7 +2376,8 @@
> cmdline_parse_inst_t cmd_config_rss = {
>  	.f = cmd_config_rss_parsed,
>  	.data = NULL,
>  	.help_str = "port config all rss "
> -
> 	"all|default|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vxla
> n-gpe|none|<flowtype_id>",
> +
> 	"all|default|eth|vlan|ip|tcp|udp|sctp|ether|port|vxlan|geneve|"
> +		"nvgre|vxlan-
> gpe|l2tpv3|esp|ah|pfcp|none|<flowtype_id>",
>  	.tokens = {
>  		(void *)&cmd_config_rss_port,
>  		(void *)&cmd_config_rss_keyword,
> @@ -2469,7 +2487,9 @@ cmdline_parse_token_string_t
> cmd_config_rss_hash_key_rss_type =
>  				 "ipv4-other#ipv6#ipv6-frag#ipv6-tcp#ipv6-
> udp#"
>  				 "ipv6-sctp#ipv6-other#l2-payload#ipv6-ex#"
>  				 "ipv6-tcp-ex#ipv6-udp-ex#"
> -				 "l3-src-only#l3-dst-only#l4-src-only#l4-dst-
> only");
> +				 "l3-src-only#l3-dst-only#l4-src-only#l4-dst-
> only#"
> +				 "l2-src-only#l2-dst-only#s-vlan#c-vlan#"
> +				 "l2tpv3#esp#ah#pfcp");
>  cmdline_parse_token_string_t cmd_config_rss_hash_key_value =
>  	TOKEN_STRING_INITIALIZER(struct cmd_config_rss_hash_key, key,
> NULL);
> 
> @@ -2480,7 +2500,9 @@ cmdline_parse_inst_t cmd_config_rss_hash_key =
> {
>  		"ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
>  		"ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
>  		"l2-payload|ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex|"
> -		"l3-src-only|l3-dst-only|l4-src-only|l4-dst-only "
> +		"l3-src-only|l3-dst-only|l4-src-only|l4-dst-only|"
> +		"l2-src-only|l2-dst-only|s-vlan|c-vlan|"
> +		"l2tpv3|esp|ah|pfcp "
>  		"<string of hex digits (variable length, NIC dependent)>",
>  	.tokens = {
>  		(void *)&cmd_config_rss_hash_key_port, diff --git
> a/app/test-pmd/config.c b/app/test-pmd/config.c index
> 69c5633e8..72f25d152 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -75,10 +75,16 @@ static const struct {  };
> 
>  const struct rss_type_info rss_type_table[] = {
> -	{ "all", ETH_RSS_IP | ETH_RSS_TCP |
> -			ETH_RSS_UDP | ETH_RSS_SCTP |
> -			ETH_RSS_L2_PAYLOAD },
> +	{ "all", ETH_RSS_ETH | ETH_RSS_VLAN | ETH_RSS_IP | ETH_RSS_TCP
> |
> +		ETH_RSS_UDP | ETH_RSS_SCTP | ETH_RSS_L2_PAYLOAD |
> +		ETH_RSS_L2TPV3 | ETH_RSS_ESP | ETH_RSS_AH |
> ETH_RSS_PFCP},
>  	{ "none", 0 },
> +	{ "eth", ETH_RSS_ETH },
> +	{ "l2-src-only", ETH_RSS_L2_SRC_ONLY },
> +	{ "l2-dst-only", ETH_RSS_L2_DST_ONLY },
> +	{ "vlan", ETH_RSS_VLAN },
> +	{ "s-vlan", ETH_RSS_S_VLAN },
> +	{ "c-vlan", ETH_RSS_C_VLAN },
>  	{ "ipv4", ETH_RSS_IPV4 },
>  	{ "ipv4-frag", ETH_RSS_FRAG_IPV4 },
>  	{ "ipv4-tcp", ETH_RSS_NONFRAG_IPV4_TCP }, @@ -110,6 +116,8 @@
> const struct rss_type_info rss_type_table[] = {
>  	{ "l4-dst-only", ETH_RSS_L4_DST_ONLY },
>  	{ "esp", ETH_RSS_ESP },
>  	{ "ah", ETH_RSS_AH },
> +	{ "l2tpv3", ETH_RSS_L2TPV3 },
> +	{ "pfcp", ETH_RSS_PFCP },
>  	{ NULL, 0 },
>  };
> 
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index dcee5de45..2928499b6 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -2199,7 +2199,7 @@ port config - RSS
> 
>  Set the RSS (Receive Side Scaling) mode on or off::
> 
> -   testpmd> port config all rss
> (all|default|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vxlan-
> gpe|none)
> +   testpmd> port config all rss
> +
> (all|default|eth|vlan|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vx
> + lan-gpe|l2tpv3|esp|ah|pfcp|none)
> 
>  RSS is on by default.

The "all" option needs to be updated with the latest "all" values.
It would also be good to reformat the text so that the "all", "none" and "default" options are on separate lines.

> 
> --
> 2.20.1

Regards,

Bernard.




More information about the dev mailing list