[dpdk-dev] [PATCH v2 1/4] ethdev: add tm support for shaper config in pkt mode
Nithin Dabilpuram
ndabilpuram at marvell.com
Tue Apr 21 11:58:13 CEST 2020
Hi Cristian,
On Tue, Apr 21, 2020 at 09:30:55AM +0000, Dumitrescu, Cristian wrote:
> Hi Nithin,
>
> > -----Original Message-----
> > From: Nithin Dabilpuram <nithind1988 at gmail.com>
> > Sent: Saturday, April 11, 2020 12:44 PM
> > To: Dumitrescu, Cristian <cristian.dumitrescu at intel.com>; Thomas Monjalon
> > <thomas at monjalon.net>; Yigit, Ferruh <ferruh.yigit at intel.com>; Andrew
> > Rybchenko <arybchenko at solarflare.com>
> > Cc: dev at dpdk.org; jerinj at marvell.com; kkanas at marvell.com; Nithin
> > Dabilpuram <ndabilpuram at marvell.com>
> > Subject: [PATCH v2 1/4] ethdev: add tm support for shaper config in pkt
> > mode
> >
> > From: Nithin Dabilpuram <ndabilpuram at marvell.com>
> >
> > Some NIC hardware support shaper to work in packet mode i.e
> > shaping or ratelimiting traffic is in packets per second (PPS) as
> > opposed to default bytes per second (BPS). Hence this patch
> > adds support to configure shared or private shaper in packet mode,
> > provide rate in PPS and add related tm capabilities in port/level/node
> > capability structures.
> >
> > This patch also updates tm port/level/node capability structures with
> > exiting features of scheduler wfq packet mode, scheduler wfq byte mode
> > and private/shared shaper byte mode.
> >
> > Signed-off-by: Nithin Dabilpuram <ndabilpuram at marvell.com>
> > ---
> >
> > v1..v2:
> > - Add seperate capability for shaper and scheduler pktmode and bytemode.
> > - Add packet_mode field in struct rte_tm_shaper_params to indicate
> > packet mode shaper profile.
> >
> > lib/librte_ethdev/rte_tm.h | 156
> > ++++++++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 154 insertions(+), 2 deletions(-)
> >
> > diff --git a/lib/librte_ethdev/rte_tm.h b/lib/librte_ethdev/rte_tm.h
> > index f9c0cf3..38fff4c 100644
> > --- a/lib/librte_ethdev/rte_tm.h
> > +++ b/lib/librte_ethdev/rte_tm.h
> > @@ -250,6 +250,23 @@ struct rte_tm_capabilities {
> > */
> > uint64_t shaper_private_rate_max;
> >
> > + /** Shaper private packet mode supported. When non-zero, this
> > parameter
> > + * indicates that there is atleast one node that can be configured
>
> Typo (please fix all occurrences): atleast -> at least
Ack.
>
> > + * with packet mode in it's private shaper. When shaper is configured
>
> Typo (please fix all occurrences): it's -> its
Ack.
>
> > + * in packet mode, committed/peak rate provided is interpreted
> > + * in packets per second.
> > + */
> > + int shaper_private_packet_mode_supported;
> > +
> > + /** Shaper private byte mode supported. When non-zero, this
> > parameter
> > + * indicates that there is atleast one node that can be configured
> > + * with byte mode in it's private shaper. When shaper is configured
> > + * in byte mode, committed/peak rate provided is interpreted in
> > + * bytes per second.
> > + */
> > + int shaper_private_byte_mode_supported;
> > +
> > +
> > /** Maximum number of shared shapers. The value of zero indicates
> > that
> > * shared shapers are not supported.
> > */
> > @@ -284,6 +301,21 @@ struct rte_tm_capabilities {
> > */
> > uint64_t shaper_shared_rate_max;
> >
> > + /** Shaper shared packet mode supported. When non-zero, this
> > parameter
> > + * indicates a shared shaper can be configured with packet mode.
> > + * When shared shaper is configured in packet mode,
> > committed/peak rate
> > + * provided is interpreted in packets per second.
> > + */
> > + int shaper_shared_packet_mode_supported;
> > +
> > + /** Shaper shared byte mode supported. When non-zero, this
> > parameter
> > + * indicates that a shared shaper can be configured with byte mode.
> > + * When shared shaper is configured in byte mode, committed/peak
> > rate
> > + * provided is interpreted in bytes per second.
> > + */
> > + int shaper_shared_byte_mode_supported;
> > +
> > +
> > /** Minimum value allowed for packet length adjustment for any
> > private
> > * or shared shaper.
> > */
> > @@ -339,6 +371,22 @@ struct rte_tm_capabilities {
> > */
> > uint32_t sched_wfq_weight_max;
> >
> > + /** WFQ packet mode supported. When non-zero, this parameter
> > indicates
> > + * that there is at least one non-leaf node that supports packet mode
> > + * for WFQ among its children. WFQ weights will be applied against
> > + * packet count for scheduling children when a non-leaf node
> > + * is configured appropriately.
> > + */
> > + int sched_wfq_packet_mode_supported;
> > +
> > + /** WFQ byte mode supported. When non-zero, this parameter
> > indicates
> > + * that there is at least one non-leaf node that supports byte mode
> > + * for WFQ among its children. WFQ weights will be applied against
> > + * bytes for scheduling children when a non-leaf node is configured
> > + * appropriately.
> > + */
> > + int sched_wfq_byte_mode_supported;
> > +
> > /** WRED packet mode support. When non-zero, this parameter
> > indicates
> > * that there is at least one leaf node that supports the WRED packet
> > * mode, which might not be true for all the leaf nodes. In packet
> > @@ -485,6 +533,24 @@ struct rte_tm_level_capabilities {
> > */
> > uint64_t shaper_private_rate_max;
> >
> > + /** Shaper private packet mode supported. When
> > non-zero,
> > + * this parameter indicates there is atleast one
> > + * non-leaf node at this level that can be configured
> > + * with packet mode in its private shaper. When
> > private
> > + * shaper is configured in packet mode,
> > committed/peak
> > + * rate provided is interpreted in packets per second.
> > + */
> > + int shaper_private_packet_mode_supported;
> > +
> > + /** Shaper private byte mode supported. When
> > non-zero,
> > + * this parameter indicates there is atleast one
> > + * non-leaf node at this level that can be configured
> > + * with byte mode in its private shaper. When private
> > + * shaper is configured in byte mode,
> > committed/peak
> > + * rate provided is interpreted in bytes per second.
> > + */
> > + int shaper_private_byte_mode_supported;
> > +
> > /** Maximum number of shared shapers that any
> > non-leaf
> > * node on this level can be part of. The value of zero
> > * indicates that shared shapers are not supported by
> > @@ -554,6 +620,25 @@ struct rte_tm_level_capabilities {
> > */
> > uint32_t sched_wfq_weight_max;
> >
> > + /** WFQ packet mode supported. When non-zero,
> > this
> > + * parameter indicates that there is at least one
> > + * non-leaf node at this level that supports packet
> > + * mode for WFQ among its children. WFQ weights
> > will
> > + * be applied against packet count for scheduling
> > + * children when a non-leaf node is configured
> > + * appropriately.
> > + */
> > + int sched_wfq_packet_mode_supported;
> > +
> > + /** WFQ byte mode supported. When non-zero, this
> > + * parameter indicates that there is at least one
> > + * non-leaf node at this level that supports byte
> > + * mode for WFQ among its children. WFQ weights
> > will
> > + * be applied against bytes for scheduling children
> > + * when a non-leaf node is configured appropriately.
> > + */
> > + int sched_wfq_byte_mode_supported;
> > +
> > /** Mask of statistics counter types supported by the
> > * non-leaf nodes on this level. Every supported
> > * statistics counter type is supported by at least one
> > @@ -596,6 +681,24 @@ struct rte_tm_level_capabilities {
> > */
> > uint64_t shaper_private_rate_max;
> >
> > + /** Shaper private packet mode supported. When
> > non-zero,
> > + * this parameter indicates there is atleast one leaf
> > + * node at this level that can be configured with
> > + * packet mode in its private shaper. When private
> > + * shaper is configured in packet mode,
> > committed/peak
> > + * rate provided is interpreted in packets per second.
> > + */
> > + int shaper_private_packet_mode_supported;
> > +
> > + /** Shaper private byte mode supported. When
> > non-zero,
> > + * this parameter indicates there is atleast one leaf
> > + * node at this level that can be configured with
> > + * byte mode in its private shaper. When private
> > shaper
> > + * is configured in byte mode, committed/peak rate
> > + * provided is interpreted in bytes per second.
> > + */
> > + int shaper_private_byte_mode_supported;
> > +
> > /** Maximum number of shared shapers that any
> > leaf node
> > * on this level can be part of. The value of zero
> > * indicates that shared shapers are not supported by
>
> You are missing the shaper_shared_(packet, byte)_mode supported for non-leaf and leaf nodes in struct rte_tm_level_capabilities.
>
> The description of this nodes should be aligned with the description of e.g. shaper_shared_n_max field: basically, we want to say that, when true, the flag signifies there is at least on non-leaf/leaf node on this level that can be part of a shared shaper that works in packet/byte mode. Makes sense?
I intentionally didn't add shaper_shared_(packet, byte)_mode in node and level
capabilities and added it in only global cap assuming existing semantics are
enforcing that.
Currently, except for 'shaper_shared_n_max', all the other existing shared shaper capabilities like
shaper_shared_dual_rate_n_max, shaper_shared_rate_min, etc are only provided in global cap.
I felt the semantics are as such because, shared shaper doesn't really belong to any node
or level and any node from any level can attach to a particular shared shaper. Isn't it so
?
>
> > @@ -686,6 +789,20 @@ struct rte_tm_node_capabilities {
> > */
> > uint64_t shaper_private_rate_max;
> >
> > + /** Shaper private packet mode supported. When non-zero, this
> > parameter
> > + * indicates private shaper of current node can be configured with
> > + * packet mode. When configured in packet mode, committed/peak
> > rate
> > + * provided is interpreted in packets per second.
> > + */
> > + int shaper_private_packet_mode_supported;
> > +
> > + /** Shaper private byte mode supported. When non-zero, this
> > parameter
> > + * indicates private shaper of current node can be configured with
> > + * byte mode. When configured in byte mode, committed/peak rate
> > + * provided is interpreted in bytes per second.
> > + */
> > + int shaper_private_byte_mode_supported;
> > +
> > /** Maximum number of shared shapers the current node can be
> > part of.
> > * The value of zero indicates that shared shapers are not supported
> > by
> > * the current node.
>
> You are missing the shaper_shared_(packet, byte)_mode supported (applicable for both non-leaf and leaf nodes, so it should occur only once in the common part of the struct) in struct rte_tm_node_capabilities. See the above comment on the applicable description style.
Please see above.
>
> > @@ -735,6 +852,23 @@ struct rte_tm_node_capabilities {
> > * WFQ weight, so WFQ is reduced to FQ.
> > */
> > uint32_t sched_wfq_weight_max;
> > +
> > + /** WFQ packet mode supported. When non-zero,
> > this
> > + * parameter indicates that current node supports
> > packet
> > + * mode for WFQ among its children. WFQ weights
> > will be
> > + * applied against packet count for scheduling
> > children
> > + * when configured appropriately.
> > + */
> > + int sched_wfq_packet_mode_supported;
> > +
> > + /** WFQ byte mode supported. When non-zero, this
> > + * parameter indicates that current node supports
> > byte
> > + * mode for WFQ among its children. WFQ weights
> > will be
> > + * applied against bytes for scheduling children when
> > + * configured appropriately.
> > + */
> > + int sched_wfq_byte_mode_supported;
> > +
> > } nonleaf;
> >
> > /** Items valid only for leaf nodes. */
> > @@ -836,10 +970,10 @@ struct rte_tm_wred_params {
> > * Token bucket
> > */
> > struct rte_tm_token_bucket {
> > - /** Token bucket rate (bytes per second) */
> > + /** Token bucket rate (bytes per second or packets per second) */
> > uint64_t rate;
> >
> > - /** Token bucket size (bytes), a.k.a. max burst size */
> > + /** Token bucket size (bytes or packets), a.k.a. max burst size */
> > uint64_t size;
> > };
> >
> > @@ -860,6 +994,11 @@ struct rte_tm_token_bucket {
> > * Dual rate shapers use both the committed and the peak token buckets.
> > The
> > * rate of the peak bucket has to be bigger than zero, as well as greater than
> > * or equal to the rate of the committed bucket.
> > + *
> > + * @see struct
> > rte_tm_capabilities::shaper_private_packet_mode_supported
> > + * @see struct rte_tm_capabilities::shaper_private_byte_mode_supported
> > + * @see struct
> > rte_tm_capabilities::shaper_shared_packet_mode_supported
> > + * @see struct rte_tm_capabilities::shaper_shared_byte_mode_supported
> > */
> > struct rte_tm_shaper_params {
> > /** Committed token bucket */
> > @@ -874,6 +1013,17 @@ struct rte_tm_shaper_params {
> > * RTE_TM_ETH_FRAMING_OVERHEAD_FCS).
> > */
> > int32_t pkt_length_adjust;
> > +
> > + /** When zero, the private or shared shaper that is associated to this
> > + * profile works in byte mode and hence *rate* and *size* fields in
> > + * both token bucket configurations are specified in bytes per second
> > + * and bytes respectively.
> > + * When non-zero, that private or shared shaper works in packet
> > mode and
> > + * hence *rate* and *size* fields in both token bucket configurations
> > + * are specified in packets per second and packets respectively. In
> > + * packet mode, *pkt_length_adjust* is ignored.
> > + */
>
> Please move the last statement ("In packet mode, *pkt_length_adjust* is ignored.") to the description of the pkt_length_adjust field.
Ack.
>
> > + int packet_mode;
> > };
> >
> > /**
> > @@ -925,6 +1075,8 @@ struct rte_tm_node_params {
> > * When non-NULL, it points to a pre-allocated array
> > of
> > * *n_sp_priorities* values, with non-zero value for
> > * byte-mode and zero for packet-mode.
> > + * @see struct
> > rte_tm_node_capabilities::sched_wfq_packet_mode_supported
> > + * @see struct
> > rte_tm_node_capabilities::sched_wfq_byte_mode_supported
> > */
> > int *wfq_weight_mode;
> >
> > --
> > 2.8.4
>
> Regards,
> Cristian
More information about the dev
mailing list