[dpdk-dev] [PATCH] net/mlx5: improve logging of MPRQ selection

[Raslan Darawsheh]

Hi,

> -----Original Message-----
> From: Alexander Kozyrev <akozyrev at mellanox.com>
> Sent: Friday, April 17, 2020 8:21 PM
> To: dev at dpdk.org
> Cc: Raslan Darawsheh <rasland at mellanox.com>; Slava Ovsiienko
> <viacheslavo at mellanox.com>; stable at dpdk.org
> Subject: [PATCH] net/mlx5: improve logging of MPRQ selection
> 
> MPRQ is silently turned off in case there is not enough
> Rx queues configured. Improve the logging to show a
> warning in this case to notify a user about the Rx burst
> function selected.
> 
> Fixes: 7d6bf6b866b8 ("net/mlx5: add Multi-Packet Rx support")
> Cc: stable at dpdk.org
> 
> Signed-off-by: Alexander Kozyrev <akozyrev at mellanox.com>
> Acked-by: Viacheslav Ovsiienko <viacheslavo at mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_rxq.c | 15 +++++++++------
>  1 file changed, 9 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
> index 9bc7af6..7a50ec6 100644
> --- a/drivers/net/mlx5/mlx5_rxq.c
> +++ b/drivers/net/mlx5/mlx5_rxq.c
> @@ -1921,19 +1921,22 @@ struct mlx5_rxq_ctrl *
>  		tmpl->rxq.sges_n = sges_n;
>  		max_lro_size = max_rx_pkt_len;
>  	}
> -	if (mprq_en && !mlx5_rxq_mprq_enabled(&tmpl->rxq))
> +	if (config->mprq.enabled && !mlx5_rxq_mprq_enabled(&tmpl-
> >rxq))
>  		DRV_LOG(WARNING,
> -			"port %u MPRQ is requested but cannot be enabled"
> -			" (requested: packet size = %u, desc = %u,"
> -			" stride_sz = %u, stride_num = %u,"
> -			" supported: min_stride_sz = %u, max_stride_sz =
> %u).",
> -			dev->data->port_id, non_scatter_min_mbuf_size,
> desc,
> +			"port %u MPRQ is requested but cannot be
> enabled\n"
> +			" (requested: pkt_sz = %u, desc_num = %u,"
> +			" rxq_num = %u, stride_sz = %u, stride_num = %u\n"
> +			"  supported: min_rxqs_num = %u,"
> +			" min_stride_sz = %u, max_stride_sz = %u).",
> +			dev->data->port_id, non_scatter_min_mbuf_size,
> +			desc, priv->rxqs_n,
>  			config->mprq.stride_size_n ?
>  				(1U << config->mprq.stride_size_n) :
>  				(1U << mprq_stride_size),
>  			config->mprq.stride_num_n ?
>  				(1U << config->mprq.stride_num_n) :
>  				(1U << mprq_stride_nums),
> +			config->mprq.min_rxqs_num,
>  			(1U << config->mprq.min_stride_size_n),
>  			(1U << config->mprq.max_stride_size_n));
>  	DRV_LOG(DEBUG, "port %u maximum number of segments per
> packet: %u",
> --
> 1.8.3.1


Patch applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh