[dpdk-dev] [EXT] Re: [PATCH v3 1/2] ethdev: add level support for RSS offload types

Kiran Kumar Kokkilagadda kirankumark at marvell.com
Wed Aug 19 05:58:35 CEST 2020



From: Ajit Khaparde <ajit.khaparde at broadcom.com>
Sent: Tuesday, August 18, 2020 11:09 PM
To: Kiran Kumar Kokkilagadda <kirankumark at marvell.com>
Cc: Wenzhuo Lu <wenzhuo.lu at intel.com>; Beilei Xing <beilei.xing at intel.com>; Bernard Iremonger <bernard.iremonger at intel.com>; Thomas Monjalon <thomas at monjalon.net>; Ferruh Yigit <ferruh.yigit at intel.com>; Andrew Rybchenko <arybchenko at solarflare.com>; dpdk-dev <dev at dpdk.org>; Jerin Jacob Kollanukkaran <jerinj at marvell.com>; Ori Kam <orika at mellanox.com>; Ziyang Xuan <xuanziyang2 at huawei.com>; Xiaoyun Wang <cloud.wangxiaoyun at huawei.com>; Guoyang Zhou <zhouguoyang at huawei.com>; Rosen Xu <rosen.xu at intel.com>; jia.guo at intel.com; Rasesh Mody <rmody at marvell.com>; Shahed Shaikh <shshaikh at marvell.com>; Nithin Kumar Dabilpuram <ndabilpuram at marvell.com>; Qiming Yang <qiming.yang at intel.com>; Qi Zhang <qi.z.zhang at intel.com>; Wiles, Keith <keith.wiles at intel.com>; Hemant Agrawal <hemant.agrawal at nxp.com>; Sachin Saxena <sachin.saxena at nxp.com>; Zhao1, Wei <wei.zhao1 at intel.com>; John Daley <johndale at cisco.com>; Hyong Youb Kim <hyonkim at cisco.com>; Chas Williams <chas3 at att.com>; Matan Azrad <matan at mellanox.com>; Shahaf Shuler <shahafs at mellanox.com>; Viacheslav Ovsiienko <viacheslavo at mellanox.com>; Rahul Lakkireddy <rahul.lakkireddy at chelsio.com>; Gaetan Rivet <grive at u256.net>; Liron Himi <lironh at marvell.com>; Jingjing Wu <jingjing.wu at intel.com>; Wei Hu (Xavier <xavier.huwei at huawei.com>; humin29 at huawei.com; yisen.zhuang at huawei.com; Somnath Kotur <somnath.kotur at broadcom.com>; Singh, Jasvinder <jasvinder.singh at intel.com>; Dumitrescu, Cristian <cristian.dumitrescu at intel.com>
Subject: [EXT] Re: [dpdk-dev][PATCH v3 1/2] ethdev: add level support for RSS offload types

External Email
________________________________


On Tue, Aug 18, 2020 at 12:22 AM <kirankumark at marvell.com<mailto:kirankumark at marvell.com>> wrote:
From: Kiran Kumar K <kirankumark at marvell.com<mailto:kirankumark at marvell.com>>

This patch reserves 2 bits as input selection to select Inner and
outer layers for RSS computation. It is combined with existing
ETH_RSS_* to choose Inner or outer layers for L2, L3 and L4.
This functionality already exists in rte_flow through level parameter in
RSS action configuration rte_flow_action_rss.

Signed-off-by: Kiran Kumar K <kirankumark at marvell.com<mailto:kirankumark at marvell.com>>
---
V3 Changes:
* Added testpmd support.

 app/test-pmd/parameters.c      |  6 ++++++
 lib/librte_ethdev/rte_ethdev.h | 27 +++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 7cb0e3d6e..5f669ff24 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -632,6 +632,8 @@ launch_args_parse(int argc, char** argv)
                { "forward-mode",               1, 0, 0 },
                { "rss-ip",                     0, 0, 0 },
                { "rss-udp",                    0, 0, 0 },
+               { "rss-outer",                  0, 0, 0 },
+               { "rss-inner-outer",            0, 0, 0 },

If we don't specify any of these two, it is inner RSS?
Yes, that is correct.

If I configure rss-outer, how do I switch to inner RSS?
Will add support to config/reset using port config in the next version.

Thanks

                { "rxq",                        1, 0, 0 },
                { "txq",                        1, 0, 0 },
                { "rxd",                        1, 0, 0 },
@@ -1051,6 +1053,10 @@ launch_args_parse(int argc, char** argv)
                                rss_hf = ETH_RSS_IP;
                        if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
                                rss_hf = ETH_RSS_UDP;
+                       if (!strcmp(lgopts[opt_idx].name, "rss-outer"))
+                               rss_hf |= ETH_RSS_LEVEL_OUTER;
+                       if (!strcmp(lgopts[opt_idx].name, "rss-inner-outer"))
+                               rss_hf |= ETH_RSS_LEVEL_INNER_OUTER;
                        if (!strcmp(lgopts[opt_idx].name, "rxq")) {
                                n = atoi(optarg);
                                if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index d29930fd8..28184cc85 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -552,6 +552,33 @@ struct rte_eth_rss_conf {
 #define RTE_ETH_RSS_L3_PRE64      (1ULL << 53)
 #define RTE_ETH_RSS_L3_PRE96      (1ULL << 52)

+/*
+ * We use the following macros to combine with the above layers to choose
+ * inner and outer layers or both for RSS computation.
+ * Note: Default is 0: inner layers, 1: outer layers, 2: both
+ * bit 50 and 51 are reserved for this.
+ */
+
+/**
+ * Level 0, It basically stands for the innermost encapsulation level RSS
+ * can be performed on according to PMD and device capabilities.
+ */
+#define ETH_RSS_LEVEL_INNER        (0ULL << 50)
+/**
+ * Level 1, It basically stands for the outermost encapsulation level RSS
+ * can be performed on according to PMD and device capabilities.
+ */
+#define ETH_RSS_LEVEL_OUTER        (1ULL << 50)
+/**
+ * Level 2, It basically stands for the both inner and outermost
+ * encapsulation level RSS can be performed on according to PMD and
+ * device capabilities.
+ */
+#define ETH_RSS_LEVEL_INNER_OUTER  (2ULL << 50)
+#define ETH_RSS_LEVEL_MASK        (3ULL << 50)
+
+#define ETH_RSS_LEVEL(rss_hf) ((rss_hf & ETH_RSS_LEVEL_MASK) >> 50)
+
 /**
  * For input set change of hash filter, if SRC_ONLY and DST_ONLY of
  * the same level are used simultaneously, it is the same case as
--
2.25.1


More information about the dev mailing list