[dpdk-dev] [PATCH v4] net/axgbe: support sfp module EEPROM

asomalap at amd.com asomalap at amd.com
Tue Dec 22 08:01:57 CET 2020


From: Amaranath Somalapuram <Amaranath.Somalapuram at amd.com>

Adding API for get_module_eeprom and get_module_info.wq

Signed-off-by: Amaranath Somalapuram <Amaranath.Somalapuram at amd.com>
---
 doc/guides/nics/features/axgbe.ini |   1 +
 drivers/net/axgbe/axgbe_ethdev.c   |   2 +
 drivers/net/axgbe/axgbe_phy.h      |   4 ++
 drivers/net/axgbe/axgbe_phy_impl.c | 108 +++++++++++++++++++++++++++++
 4 files changed, 115 insertions(+)

diff --git a/doc/guides/nics/features/axgbe.ini b/doc/guides/nics/features/axgbe.ini
index 34df0d1ee..3a090183e 100644
--- a/doc/guides/nics/features/axgbe.ini
+++ b/doc/guides/nics/features/axgbe.ini
@@ -17,6 +17,7 @@ CRC offload          = Y
 L3 checksum offload  = Y
 L4 checksum offload  = Y
 Basic stats          = Y
+Module EEPROM dump   = Y
 Linux UIO            = Y
 x86-32               = Y
 x86-64               = Y
diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index cfe6aba73..22e05e8cb 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -257,6 +257,8 @@ static const struct eth_dev_ops axgbe_eth_dev_ops = {
 	.timesync_adjust_time         = axgbe_timesync_adjust_time,
 	.timesync_read_time           = axgbe_timesync_read_time,
 	.timesync_write_time          = axgbe_timesync_write_time,
+	.get_module_info              = axgbe_get_module_info,
+	.get_module_eeprom            = axgbe_get_module_eeprom,
 };
 
 static int axgbe_phy_reset(struct axgbe_port *pdata)
diff --git a/drivers/net/axgbe/axgbe_phy.h b/drivers/net/axgbe/axgbe_phy.h
index 77ee20a31..d9d7fde41 100644
--- a/drivers/net/axgbe/axgbe_phy.h
+++ b/drivers/net/axgbe/axgbe_phy.h
@@ -188,5 +188,9 @@
 #define DUPLEX_FULL             0x01
 #define DUPLEX_UNKNOWN          0xff
 
+int axgbe_get_module_info(struct rte_eth_dev *dev,
+				struct rte_eth_dev_module_info *modinfo);
+int axgbe_get_module_eeprom(struct rte_eth_dev *dev,
+				  struct rte_dev_eeprom_info *info);
 #endif
 /* PHY */
diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index 02236ec19..af18a8d51 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -141,12 +141,18 @@ enum axgbe_sfp_speed {
 
 #define AXGBE_SFP_EXTD_CC			31
 
+#define AXGBE_SFP_EEPROM_PAGE_SIZE		256
+
 struct axgbe_sfp_eeprom {
 	u8 base[64];
 	u8 extd[32];
 	u8 vendor[32];
 };
 
+struct axgbe_sfp_eeprom_module {
+	u8 base[AXGBE_SFP_EEPROM_PAGE_SIZE];
+};
+
 #define AXGBE_BEL_FUSE_VENDOR	"BEL-FUSE"
 #define AXGBE_BEL_FUSE_PARTNO	"1GBT-SFP06"
 
@@ -734,6 +740,108 @@ static int axgbe_phy_sfp_read_eeprom(struct axgbe_port *pdata)
 	return ret;
 }
 
+int axgbe_get_module_info(struct rte_eth_dev *dev,
+				struct rte_eth_dev_module_info *modinfo)
+{
+	struct axgbe_port *pdata = dev->data->dev_private;
+	struct axgbe_sfp_eeprom sfp_eeprom;
+	uint8_t eeprom_addr;
+	int ret;
+
+	ret = axgbe_phy_get_comm_ownership(pdata);
+
+	if (ret)
+		return -EIO;
+
+	ret = axgbe_phy_sfp_get_mux(pdata);
+
+	if (ret) {
+		PMD_DRV_LOG(ERR, "I2C error setting SFP MUX\n");
+		goto put;
+	}
+
+	eeprom_addr = 0;
+	ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_SERIAL_ID_ADDRESS,
+			&eeprom_addr, sizeof(eeprom_addr),
+			 &sfp_eeprom, sizeof(sfp_eeprom));
+
+	if (ret) {
+		PMD_DRV_LOG(ERR, "I2C error reading SFP EEPROM\n");
+		goto put;
+	}
+
+	if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] != 0xff) {
+		if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] == 0) {
+			modinfo->type = RTE_ETH_MODULE_SFF_8079;
+			modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN;
+		} else {
+			modinfo->type = RTE_ETH_MODULE_SFF_8472;
+			modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN;
+		}
+	}
+
+put:
+	axgbe_phy_sfp_put_mux(pdata);
+	axgbe_phy_put_comm_ownership(pdata);
+	return ret;
+}
+
+int axgbe_get_module_eeprom(struct rte_eth_dev *dev,
+				struct rte_dev_eeprom_info *info)
+{
+	struct axgbe_port *pdata = dev->data->dev_private;
+	struct axgbe_sfp_eeprom_module sfp_eeprom;
+	uint8_t eeprom_addr;
+	uint8_t *data;
+	uint32_t i;
+	int ret;
+
+	ret = axgbe_phy_get_comm_ownership(pdata);
+
+	if (ret)
+		return -EIO;
+
+	if (!info || !info->length || !info->data) {
+		axgbe_phy_put_comm_ownership(pdata);
+		return -EINVAL;
+	}
+
+	ret = axgbe_phy_sfp_get_mux(pdata);
+	if (ret) {
+		PMD_DRV_LOG(ERR, "I2C error setting SFP MUX\n");
+		goto put;
+	}
+
+	eeprom_addr = 0;
+	ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_SERIAL_ID_ADDRESS,
+			&eeprom_addr, sizeof(eeprom_addr),
+			&sfp_eeprom, sizeof(sfp_eeprom));
+	if (ret) {
+		PMD_DRV_LOG(ERR, "I2C error reading SFP EEPROM\n");
+		goto put;
+	}
+	data = info->data;
+
+	/* for AXGBE_SFP_SERIAL_ID_ADDRESS */
+	for (i = 0; i < AXGBE_SFP_EEPROM_PAGE_SIZE; i++)
+		data[i] = sfp_eeprom.base[i];
+
+	eeprom_addr = 0;
+	ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_DIAG_INFO_ADDRESS,
+			&eeprom_addr, sizeof(eeprom_addr),
+			&sfp_eeprom, sizeof(sfp_eeprom));
+
+	/* for AXGBE_SFP_DIAG_INFO_ADDRESS */
+	for (i = 0; i < info->length - AXGBE_SFP_EEPROM_PAGE_SIZE; i++)
+		data[i + AXGBE_SFP_EEPROM_PAGE_SIZE] = sfp_eeprom.base[i];
+
+put:
+	axgbe_phy_sfp_put_mux(pdata);
+	axgbe_phy_put_comm_ownership(pdata);
+	return ret;
+}
+
+
 static void axgbe_phy_sfp_signals(struct axgbe_port *pdata)
 {
 	struct axgbe_phy_data *phy_data = pdata->phy_data;
-- 
2.25.1



More information about the dev mailing list