[dpdk-dev] [PATCH v7] app/testpmd: add portlist option

Hariprasad Govindharajan hariprasad.govindharajan at intel.com
Mon Feb 10 18:19:36 CET 2020


In current version, we are setting the ports
using portmask. With portmask, we can use only
upto 64 ports. This portlist option enables the user
to use more than 64 ports.
Now we can specify the ports in 2 different ways
 - Using portmask (-p [0x]nnn): mask must be in hex format
 - Using portlist in the following format
 --portlist <p1>[-p2][,p3[-p4],...]

 --portmask 0x2 is same as --portlist 1
 --portmask 0x3 is same as --portlist 0-1

Signed-off-by: Hariprasad Govindharajan <hariprasad.govindharajan at intel.com>
---
v7:
moved the port validation outside the parser function.
added meaningful comments describing the new functionality.
renamed the variables with meaningful names

v6:
optimized the code to check for duplicates

v5:
added a check to validate the ports available before
setting them. also added comments in the testpmd file
for the new function

v4:
the parser is modified so that we don't ues 2 arrays
to convert the listed port values

v3:
squashed the 2 patches and made it 1 patch with
changes only in testpmd. Also working on optmizing
the parser

v2:
moved the parser function to testpmd
---
 app/test-pmd/config.c                 | 114 ++++++++++++++++++++++++++++++++++
 app/test-pmd/parameters.c             |   5 ++
 app/test-pmd/testpmd.h                |   3 +
 doc/guides/testpmd_app_ug/run_app.rst |   7 +++
 4 files changed, 129 insertions(+)

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 9669cbd..962984b 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2587,6 +2587,120 @@ set_fwd_ports_list(unsigned int *portlist, unsigned int nb_pt)
 	}
 }
 
+/**
+ * Parse the user input and obtain the list of forwarding ports
+ *
+ * @param[in] list
+ *   String containing the user input. User can specify
+ *   in these formats 1,3,5 or 1-3 or 1-2,5 or 3,5-6.
+ *   For example, if the user wants to use all the available
+ *   4 ports in his system, then the input can be 0-3 or 0,1,2,3.
+ *   If the user wants to use only the ports 1,2 then the input
+ *   is 1,2.
+ *   valid characters are '-' and ','
+ *   invalid chars like '.' or '#' will result in
+ *   EAL: Error - exiting with code: 1
+ *     Cause: Invalid fwd port list
+ * @param[out] values
+ *   This array will be filled with a list of port IDs
+ *   based on the user input
+ *   Note that duplicate entries are discarded and only the first
+ *   count entries in this array are port IDs and all the rest
+ *   will contain default values
+ * @param[in] maxsize
+ *   This parameter denotes 2 things
+ *   1) Size of the values array
+ *   2) Maximum value of each element in the values array
+ * @return
+ *   -On success, returns total count of port IDs
+ *   -On failure, returns -1.
+ */
+static int
+parse_port_list(const char *list, unsigned int *values, int maxsize)
+{
+	int count = 0;
+	char *end = NULL;
+	int min, max;
+	int value, i;
+	unsigned int marked[maxsize];
+
+	for (i = 0; i < maxsize; i++)
+		marked[i] = 0;
+
+	if (list == NULL || values == NULL || maxsize < 0)
+		return -1;
+
+	/* Remove all blank characters ahead */
+	while (isblank(*list))
+		list++;
+
+	min = maxsize;
+
+	do {
+		while (isblank(*list))
+			list++;
+		if (*list == '\0')
+			return -1;
+		errno = 0;
+		value = strtol(list, &end, 10);
+		if (errno || end == NULL)
+			return -1;
+		if (value < 0 || value >= maxsize)
+			return -1;
+		while (isblank(*end))
+			end++;
+		if (*end == '-') {
+			min = value;
+		} else if ((*end == ',') || (*end == '\0')) {
+			max = value;
+			if (min == maxsize)
+				min = value;
+			for (i = min; i <= max; i++) {
+				if (count < maxsize) {
+					if (marked[i])
+						continue;
+					values[count] = i;
+					marked[i] = 1;
+					count++;
+				}
+			}
+			min = maxsize;
+		} else
+			return -1;
+		list = end + 1;
+	} while (*end != '\0');
+
+	if (count == 0)
+		return -1;
+	return count;
+}
+
+void
+parse_fwd_portlist(const char *portlist)
+{
+	int portcount;
+	unsigned int portindex[RTE_MAX_ETHPORTS];
+	int i, valid_port_count = 0;
+
+	portcount = parse_port_list(portlist, portindex, RTE_MAX_ETHPORTS);
+	if (portcount < 0)
+		rte_exit(EXIT_FAILURE, "Invalid fwd port list\n");
+
+	/*
+	 * Here we verify the validity of the ports
+	 * and thereby calculate the total number of
+	 * valid ports
+	 */
+	for (i = 0; i < portcount && valid_port_count < portcount; i++) {
+		if (rte_eth_dev_is_valid_port(portindex[i])) {
+			portindex[valid_port_count] = portindex[i];
+			valid_port_count++;
+		}
+	}
+
+	set_fwd_ports_list(portindex, valid_port_count);
+}
+
 void
 set_fwd_ports_mask(uint64_t portmask)
 {
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 6340104..404dba2 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -57,6 +57,7 @@ usage(char* progname)
 	       "[--help|-h] | [--auto-start|-a] | ["
 	       "--tx-first | --stats-period=PERIOD | "
 	       "--coremask=COREMASK --portmask=PORTMASK --numa "
+	       "--portlist=PORTLIST "
 	       "--mbuf-size= | --total-num-mbufs= | "
 	       "--nb-cores= | --nb-ports= | "
 #ifdef RTE_LIBRTE_CMDLINE
@@ -92,6 +93,7 @@ usage(char* progname)
 	       "packet forwarding.\n");
 	printf("  --portmask=PORTMASK: hexadecimal bitmask of ports used "
 	       "by the packet forwarding test.\n");
+	printf("  --portlist=PORTLIST: list of forwarding ports\n");
 	printf("  --numa: enable NUMA-aware allocation of RX/TX rings and of "
 	       "RX memory buffers (mbufs).\n");
 	printf("  --port-numa-config=(port,socket)[,(port,socket)]: "
@@ -587,6 +589,7 @@ launch_args_parse(int argc, char** argv)
 		{ "nb-ports",			1, 0, 0 },
 		{ "coremask",			1, 0, 0 },
 		{ "portmask",			1, 0, 0 },
+		{ "portlist",			1, 0, 0 },
 		{ "numa",			0, 0, 0 },
 		{ "no-numa",			0, 0, 0 },
 		{ "mp-anon",			0, 0, 0 },
@@ -825,6 +828,8 @@ launch_args_parse(int argc, char** argv)
 				parse_fwd_coremask(optarg);
 			if (!strcmp(lgopts[opt_idx].name, "portmask"))
 				parse_fwd_portmask(optarg);
+			if (!strcmp(lgopts[opt_idx].name, "portlist"))
+				parse_fwd_portlist(optarg);
 			if (!strcmp(lgopts[opt_idx].name, "no-numa"))
 				numa_support = 0;
 			if (!strcmp(lgopts[opt_idx].name, "numa"))
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 3dd5fc7..33ef3e2 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -614,6 +614,9 @@ lcore_num(void)
 	rte_panic("lcore_id of current thread not found in fwd_lcores_cpuids\n");
 }
 
+void
+parse_fwd_portlist(const char *port);
+
 static inline struct fwd_lcore *
 current_fwd_lcore(void)
 {
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index 9ab4d70..727ef52 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -77,6 +77,13 @@ The command line options are:
 
     Set the hexadecimal bitmask of the ports used by the packet forwarding test.
 
+*   ``--portlist=X``
+
+      Set the forwarding ports based on the user input used by the packet forwarding test.
+      '-' denotes a range of ports to set including the two specified port IDs
+      ',' separates multiple port values.
+      Possible examples like --portlist=0,1 or --portlist=0-2 or --portlist=0,1-2 etc
+
 *   ``--numa``
 
     Enable NUMA-aware allocation of RX/TX rings and of RX memory buffers
-- 
2.7.4



More information about the dev mailing list