[dpdk-dev] [PATCH v2] net/mlx5: fix match on Ethertype and CVLAN tag

Raslan Darawsheh rasland at mellanox.com
Thu Feb 20 14:23:16 CET 2020


Hi,

> -----Original Message-----
> From: Dekel Peled <dekelp at mellanox.com>
> Sent: Thursday, February 20, 2020 1:33 PM
> To: Matan Azrad <matan at mellanox.com>; Slava Ovsiienko
> <viacheslavo at mellanox.com>; Raslan Darawsheh <rasland at mellanox.com>
> Cc: dev at dpdk.org; stable at dpdk.org
> Subject: [PATCH v2] net/mlx5: fix match on Ethertype and CVLAN tag
> 
> HW supports match on one Ethertype, the Ethertype following the last
> VLAN tag of the packet (see PRM).
> Previous patch added specific handling for packets with VLAN tag,
> after setting match on Ethertype.
> 
> This patch moves the handling of packets with VLAN tag, to be done
> before and instead of setting match on Ethertype.
> 
> Previous patch also added, as part of specific handling for packets
> with VLAN tag, the setting of cvlan_tag mask bit in translation of
> L3 items.
> In case of L3 tunnel there is no inner L2 header, so setting this
> mask bit is wrong and causes match failures.
> 
> This patch adds check to make sure L2 header exists before setting
> cvlan_tag mask bit for L3 items.
> 
> Fixes: 00f75a40576b ("net/mlx5: fix VLAN match for DV mode")
> Cc: stable at dpdk.org
> 
> Signed-off-by: Dekel Peled <dekelp at mellanox.com>

Tested-by: Raslan Darawsheh <rasland at mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_flow_dv.c | 42
> ++++++++++++++++++++++++++++++++---------
>  1 file changed, 33 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index 467d1ce..6f15a91 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -5213,19 +5213,27 @@ struct field_modify_info modify_tcp[] = {
>  	/* The value must be in the range of the mask. */
>  	for (i = 0; i < sizeof(eth_m->dst); ++i)
>  		l24_v[i] = eth_m->src.addr_bytes[i] & eth_v-
> >src.addr_bytes[i];
> -	MLX5_SET(fte_match_set_lyr_2_4, headers_m, ethertype,
> -		 rte_be_to_cpu_16(eth_m->type));
> -	l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
> ethertype);
> -	*(uint16_t *)(l24_v) = eth_m->type & eth_v->type;
>  	if (eth_v->type) {
>  		/* When ethertype is present set mask for tagged VLAN. */
>  		MLX5_SET(fte_match_set_lyr_2_4, headers_m, cvlan_tag,
> 1);
>  		/* Set value for tagged VLAN if ethertype is 802.1Q. */
>  		if (eth_v->type == RTE_BE16(RTE_ETHER_TYPE_VLAN) ||
> -		    eth_v->type == RTE_BE16(RTE_ETHER_TYPE_QINQ))
> +		    eth_v->type == RTE_BE16(RTE_ETHER_TYPE_QINQ)) {
>  			MLX5_SET(fte_match_set_lyr_2_4, headers_v,
> cvlan_tag,
>  				 1);
> +			/* Return here to avoid setting match on ethertype.
> */
> +			return;
> +		}
>  	}
> +	/*
> +	 * HW supports match on one Ethertype, the Ethertype following the
> last
> +	 * VLAN tag of the packet (see PRM).
> +	 * Set match on ethertype only if ETH header is not followed by
> VLAN.
> +	 */
> +	MLX5_SET(fte_match_set_lyr_2_4, headers_m, ethertype,
> +		 rte_be_to_cpu_16(eth_m->type));
> +	l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
> ethertype);
> +	*(uint16_t *)(l24_v) = eth_m->type & eth_v->type;
>  }
> 
>  /**
> @@ -5299,6 +5307,8 @@ struct field_modify_info modify_tcp[] = {
>   *   Flow matcher value.
>   * @param[in] item
>   *   Flow pattern to translate.
> + * @param[in] item_flags
> + *   Bit-fields that holds the items detected until now.
>   * @param[in] inner
>   *   Item is inner pattern.
>   * @param[in] group
> @@ -5307,6 +5317,7 @@ struct field_modify_info modify_tcp[] = {
>  static void
>  flow_dv_translate_item_ipv4(void *matcher, void *key,
>  			    const struct rte_flow_item *item,
> +			    const uint64_t item_flags,
>  			    int inner, uint32_t group)
>  {
>  	const struct rte_flow_item_ipv4 *ipv4_m = item->mask;
> @@ -5366,7 +5377,12 @@ struct field_modify_info modify_tcp[] = {
>  		 ipv4_m->hdr.next_proto_id);
>  	MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
>  		 ipv4_v->hdr.next_proto_id & ipv4_m->hdr.next_proto_id);
> -	MLX5_SET(fte_match_set_lyr_2_4, headers_m, cvlan_tag, 1);
> +	/*
> +	 * On outer header (which must contains L2), or inner header with L2,
> +	 * set cvlan_tag mask bit to mark this packet as untagged.
> +	 */
> +	if (!inner || item_flags & MLX5_FLOW_LAYER_INNER_L2)
> +		MLX5_SET(fte_match_set_lyr_2_4, headers_m, cvlan_tag,
> 1);
>  }
> 
>  /**
> @@ -5378,6 +5394,8 @@ struct field_modify_info modify_tcp[] = {
>   *   Flow matcher value.
>   * @param[in] item
>   *   Flow pattern to translate.
> + * @param[in] item_flags
> + *   Bit-fields that holds the items detected until now.
>   * @param[in] inner
>   *   Item is inner pattern.
>   * @param[in] group
> @@ -5386,6 +5404,7 @@ struct field_modify_info modify_tcp[] = {
>  static void
>  flow_dv_translate_item_ipv6(void *matcher, void *key,
>  			    const struct rte_flow_item *item,
> +			    const uint64_t item_flags,
>  			    int inner, uint32_t group)
>  {
>  	const struct rte_flow_item_ipv6 *ipv6_m = item->mask;
> @@ -5471,7 +5490,12 @@ struct field_modify_info modify_tcp[] = {
>  		 ipv6_m->hdr.proto);
>  	MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
>  		 ipv6_v->hdr.proto & ipv6_m->hdr.proto);
> -	MLX5_SET(fte_match_set_lyr_2_4, headers_m, cvlan_tag, 1);
> +	/*
> +	 * On outer header (which must contains L2), or inner header with L2,
> +	 * set cvlan_tag mask bit to mark this packet as untagged.
> +	 */
> +	if (!inner || item_flags & MLX5_FLOW_LAYER_INNER_L2)
> +		MLX5_SET(fte_match_set_lyr_2_4, headers_m, cvlan_tag,
> 1);
>  }
> 
>  /**
> @@ -7574,7 +7598,7 @@ struct field_modify_info modify_tcp[] = {
>  			mlx5_flow_tunnel_ip_check(items, next_protocol,
>  						  &item_flags, &tunnel);
>  			flow_dv_translate_item_ipv4(match_mask,
> match_value,
> -						    items, tunnel,
> +						    items, item_flags, tunnel,
>  						    dev_flow->group);
>  			matcher.priority = MLX5_PRIORITY_MAP_L3;
>  			last_item = tunnel ?
> MLX5_FLOW_LAYER_INNER_L3_IPV4 :
> @@ -7597,7 +7621,7 @@ struct field_modify_info modify_tcp[] = {
>  			mlx5_flow_tunnel_ip_check(items, next_protocol,
>  						  &item_flags, &tunnel);
>  			flow_dv_translate_item_ipv6(match_mask,
> match_value,
> -						    items, tunnel,
> +						    items, item_flags, tunnel,
>  						    dev_flow->group);
>  			matcher.priority = MLX5_PRIORITY_MAP_L3;
>  			last_item = tunnel ?
> MLX5_FLOW_LAYER_INNER_L3_IPV6 :
> --
> 1.8.3.1

Patch applied to next-net-mlx,

Kindest regards
Raslan Darawsheh


More information about the dev mailing list