[dpdk-dev] [PATCH v2 01/11] examples/l3fwd: add framework for event device

Pavan Nikhilesh Bhagavatula pbhagavatula at marvell.com
Mon Jan 6 05:27:02 CET 2020



>-----Original Message-----
>From: dev <dev-bounces at dpdk.org> On Behalf Of Ananyev,
>Konstantin
>Sent: Friday, January 3, 2020 6:19 PM
>To: Pavan Nikhilesh Bhagavatula <pbhagavatula at marvell.com>; Jerin
>Jacob Kollanukkaran <jerinj at marvell.com>; Kovacevic, Marko
><marko.kovacevic at intel.com>; Ori Kam <orika at mellanox.com>;
>Richardson, Bruce <bruce.richardson at intel.com>; Nicolau, Radu
><radu.nicolau at intel.com>; Akhil Goyal <akhil.goyal at nxp.com>;
>Kantecki, Tomasz <tomasz.kantecki at intel.com>; Sunil Kumar Kori
><skori at marvell.com>
>Cc: dev at dpdk.org
>Subject: Re: [dpdk-dev] [PATCH v2 01/11] examples/l3fwd: add
>framework for event device
>
>
>> Add framework to enable event device as a producer of packets.
>> To switch between event mode and poll mode the following options
>> have been added:
>> 	`--mode="eventdev"` or `--mode="poll"`
>> Also, allow the user to select the schedule type to be either
>> RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC or
>RTE_SCHED_TYPE_PARALLEL
>> through:
>> 	`--eventq-sched="ordered"` or `--eventq-sched="atomic"` or
>> 		`--eventq-sched="parallel"`
>>
>> Poll mode is still the default operation mode.
>>
>> Signed-off-by: Sunil Kumar Kori <skori at marvell.com>
>> ---
>>  examples/l3fwd/Makefile      |  2 +-
>>  examples/l3fwd/l3fwd.h       |  6 +++
>>  examples/l3fwd/l3fwd_event.c | 75
>++++++++++++++++++++++++++++++++++++
>>  examples/l3fwd/l3fwd_event.h | 54
>++++++++++++++++++++++++++
>>  examples/l3fwd/main.c        | 41 +++++++++++++++++---
>>  examples/l3fwd/meson.build   |  4 +-
>>  6 files changed, 174 insertions(+), 8 deletions(-)
>>  create mode 100644 examples/l3fwd/l3fwd_event.c
>>  create mode 100644 examples/l3fwd/l3fwd_event.h
>>
>> diff --git a/examples/l3fwd/Makefile b/examples/l3fwd/Makefile
>> index b2dbf2607..c892b867b 100644
>> --- a/examples/l3fwd/Makefile
>> +++ b/examples/l3fwd/Makefile
>> @@ -5,7 +5,7 @@
>>  APP = l3fwd
>>
>>  # all source are stored in SRCS-y
>> -SRCS-y := main.c l3fwd_lpm.c l3fwd_em.c
>> +SRCS-y := main.c l3fwd_lpm.c l3fwd_em.c l3fwd_event.c
>>
>>  # Build using pkg-config variables if possible
>>  ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
>> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
>> index 293fb1fa2..cd17a41b3 100644
>> --- a/examples/l3fwd/l3fwd.h
>> +++ b/examples/l3fwd/l3fwd.h
>> @@ -5,6 +5,9 @@
>>  #ifndef __L3_FWD_H__
>>  #define __L3_FWD_H__
>>
>> +#include <stdbool.h>
>> +
>
>Why do we need it here?

Looks like an artifact I will remove it in next version.

>
>> +#include <rte_ethdev.h>
>>  #include <rte_vect.h>
>>
>>  #define DO_RFC_1812_CHECKS
>> @@ -169,6 +172,9 @@ is_valid_ipv4_pkt(struct rte_ipv4_hdr *pkt,
>uint32_t link_len)
>>  }
>>  #endif /* DO_RFC_1812_CHECKS */
>>
>> +void
>> +print_usage(const char *prgname);
>> +
>>  /* Function pointers for LPM or EM functionality. */
>>  void
>>  setup_lpm(const int socketid);
>> diff --git a/examples/l3fwd/l3fwd_event.c
>b/examples/l3fwd/l3fwd_event.c
>> new file mode 100644
>> index 000000000..3892720be
>> --- /dev/null
>> +++ b/examples/l3fwd/l3fwd_event.c
>> @@ -0,0 +1,75 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright(C) 2019 Marvell International Ltd.
>> + */
>> +
>> +#include <stdbool.h>
>> +#include <getopt.h>
>> +
>> +#include "l3fwd.h"
>> +#include "l3fwd_event.h"
>> +
>> +static void
>> +parse_mode(const char *optarg)
>> +{
>> +	struct l3fwd_event_resources *evt_rsrc =
>l3fwd_get_eventdev_rsrc();
>> +
>> +	if (!strncmp(optarg, "poll", 4))
>
>That looks a bit clumsy and error-prone.
>Just strcmp(optarg, "poll") seems enough here.
>Same for other similar places.

Will simplify in next version.

>
>> +		evt_rsrc->enabled = false;
>> +	else if (!strncmp(optarg, "eventdev", 8))
>> +		evt_rsrc->enabled = true;
>> +}
>> +
>> +static void
>> +parse_eventq_sync(const char *optarg)
>> +{
>> +	struct l3fwd_event_resources *evt_rsrc =
>l3fwd_get_eventdev_rsrc();
>> +
>> +	if (!strncmp(optarg, "ordered", 7))
>> +		evt_rsrc->sched_type = RTE_SCHED_TYPE_ORDERED;
>> +	if (!strncmp(optarg, "atomic", 6))
>> +		evt_rsrc->sched_type = RTE_SCHED_TYPE_ATOMIC;
>> +	if (!strncmp(optarg, "parallel", 8))
>> +		evt_rsrc->sched_type = RTE_SCHED_TYPE_PARALLEL;
>> +}
>> +
>> +static void
>> +l3fwd_parse_eventdev_args(char **argv, int argc)
>> +{
>> +	const struct option eventdev_lgopts[] = {
>> +		{CMD_LINE_OPT_MODE, 1, 0,
>CMD_LINE_OPT_MODE_NUM},
>> +		{CMD_LINE_OPT_EVENTQ_SYNC, 1, 0,
>CMD_LINE_OPT_EVENTQ_SYNC_NUM},
>> +		{NULL, 0, 0, 0}
>> +	};
>> +	char *prgname = argv[0];
>> +	char **argvopt = argv;
>> +	int32_t option_index;
>> +	int32_t opt;
>> +
>> +	while ((opt = getopt_long(argc, argvopt, "", eventdev_lgopts,
>> +					&option_index)) != EOF) {
>> +		switch (opt) {
>> +		case CMD_LINE_OPT_MODE_NUM:
>> +			parse_mode(optarg);
>> +			break;
>> +
>> +		case CMD_LINE_OPT_EVENTQ_SYNC_NUM:
>> +			parse_eventq_sync(optarg);
>> +			break;
>> +
>> +		default:
>> +			print_usage(prgname);
>> +			exit(1);
>> +		}
>> +	}
>> +}
>> +
>> +void
>> +l3fwd_event_resource_setup(void)
>> +{
>> +	struct l3fwd_event_resources *evt_rsrc =
>l3fwd_get_eventdev_rsrc();
>> +
>> +	/* Parse eventdev command line options */
>> +	l3fwd_parse_eventdev_args(evt_rsrc->args, evt_rsrc-
>>nb_args);
>> +	if (!evt_rsrc->enabled)
>> +		return;
>> +}
>> diff --git a/examples/l3fwd/l3fwd_event.h
>b/examples/l3fwd/l3fwd_event.h
>> new file mode 100644
>> index 000000000..c95296c38
>> --- /dev/null
>> +++ b/examples/l3fwd/l3fwd_event.h
>> @@ -0,0 +1,54 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright(C) 2019 Marvell International Ltd.
>> + */
>> +
>> +#ifndef __L3FWD_EVENTDEV_H__
>> +#define __L3FWD_EVENTDEV_H__
>> +
>> +#include <rte_common.h>
>> +#include <rte_eventdev.h>
>> +#include <rte_spinlock.h>
>> +
>> +#include "l3fwd.h"
>> +
>> +#define CMD_LINE_OPT_MODE "mode"
>> +#define CMD_LINE_OPT_EVENTQ_SYNC "eventq-sched"
>> +
>> +enum {
>> +	CMD_LINE_OPT_MODE_NUM = 265,
>> +	CMD_LINE_OPT_EVENTQ_SYNC_NUM,
>> +};
>> +
>> +struct l3fwd_event_resources {
>> +	uint8_t sched_type;
>> +	uint8_t enabled;
>> +	uint8_t nb_args;
>> +	char **args;
>> +};
>> +
>> +static inline struct l3fwd_event_resources *
>> +l3fwd_get_eventdev_rsrc(void)
>> +{
>> +	static const char name[RTE_MEMZONE_NAMESIZE] =
>"l3fwd_event_rsrc";
>> +	const struct rte_memzone *mz;
>> +
>> +	mz = rte_memzone_lookup(name);
>> +
>> +	if (mz != NULL)
>> +		return mz->addr;
>> +
>> +	mz = rte_memzone_reserve(name, sizeof(struct
>l3fwd_event_resources),
>> +				 0, 0);
>> +	if (mz != NULL) {
>> +		memset(mz->addr, 0, sizeof(struct
>l3fwd_event_resources));
>> +		return mz->addr;
>> +	}
>> +
>> +	rte_exit(EXIT_FAILURE, "Unable to allocate memory for
>eventdev cfg\n");
>> +
>> +	return NULL;
>> +}
>
>Does this function really need to be inline?
>It wouldn't be fast anyway.
>Another question - do you really need memzone here?
>Wouldn't just rte_malloc() be enough?

Will remove inline in next version. 
rte_malloc would call for a global variable which I'm 
trying to avoid. I don't think there is any harm in using
named memzone.

>
>> +
>> +void l3fwd_event_resource_setup(void);
>> +
>> +#endif /* __L3FWD_EVENTDEV_H__ */
>> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
>> index 4dea12a65..19ca4483c 100644
>> --- a/examples/l3fwd/main.c
>> +++ b/examples/l3fwd/main.c
>> @@ -13,12 +13,12 @@
>>  #include <errno.h>
>>  #include <getopt.h>
>>  #include <signal.h>
>> -#include <stdbool.h>
>>
>>  #include <rte_common.h>
>>  #include <rte_vect.h>
>>  #include <rte_byteorder.h>
>>  #include <rte_log.h>
>> +#include <rte_malloc.h>
>>  #include <rte_memory.h>
>>  #include <rte_memcpy.h>
>>  #include <rte_eal.h>
>> @@ -33,7 +33,6 @@
>>  #include <rte_random.h>
>>  #include <rte_debug.h>
>>  #include <rte_ether.h>
>> -#include <rte_ethdev.h>
>>  #include <rte_mempool.h>
>>  #include <rte_mbuf.h>
>>  #include <rte_ip.h>
>> @@ -46,6 +45,7 @@
>>  #include <cmdline_parse_etheraddr.h>
>>
>>  #include "l3fwd.h"
>> +#include "l3fwd_event.h"
>>
>>  /*
>>   * Configurable number of RX/TX ring descriptors
>> @@ -274,7 +274,7 @@ init_lcore_rx_queues(void)
>>  }
>>
>>  /* display usage */
>> -static void
>> +void
>>  print_usage(const char *prgname)
>>  {
>>  	fprintf(stderr, "%s [EAL options] --"
>> @@ -289,7 +289,9 @@ print_usage(const char *prgname)
>>  		" [--hash-entry-num]"
>>  		" [--ipv6]"
>>  		" [--parse-ptype]"
>> -		" [--per-port-pool]\n\n"
>> +		" [--per-port-pool]"
>> +		" [--mode]"
>> +		" [--eventq-sched]\n\n"
>>
>>  		"  -p PORTMASK: Hexadecimal bitmask of ports to
>configure\n"
>>  		"  -P : Enable promiscuous mode\n"
>> @@ -304,7 +306,13 @@ print_usage(const char *prgname)
>>  		"  --hash-entry-num: Specify the hash entry number in
>hexadecimal to be setup\n"
>>  		"  --ipv6: Set if running ipv6 packets\n"
>>  		"  --parse-ptype: Set to use software to analyze packet
>type\n"
>> -		"  --per-port-pool: Use separate buffer pool per
>port\n\n",
>> +		"  --per-port-pool: Use separate buffer pool per port\n"
>> +		"  --mode: Packet transfer mode for I/O, poll or
>eventdev\n"
>> +		"          Default mode = poll\n"
>> +		"  --eventq-sched: Event queue synchronization
>method "
>> +		"                  ordered, atomic or parallel.\n\t\t"
>> +		"		   Default: atomic\n\t\t"
>> +		"                  Valid only if --mode=eventdev\n\n",
>>  		prgname);
>>  }
>>
>> @@ -504,11 +512,19 @@ static const struct option lgopts[] = {
>>  static int
>>  parse_args(int argc, char **argv)
>>  {
>> +	struct l3fwd_event_resources *evt_rsrc;
>>  	int opt, ret;
>>  	char **argvopt;
>>  	int option_index;
>>  	char *prgname = argv[0];
>>
>> +	evt_rsrc = l3fwd_get_eventdev_rsrc();
>> +	evt_rsrc->args = rte_zmalloc("l3fwd_event_args", sizeof(char
>*), 0);
>> +	if (evt_rsrc->args == NULL)
>> +		rte_exit(EXIT_FAILURE,
>> +				"Unable to allocate memory for
>eventdev arg");
>> +	evt_rsrc->args[0] = argv[0];
>> +	evt_rsrc->nb_args++;
>>  	argvopt = argv;
>>
>>  	/* Error or normal output strings. */
>> @@ -538,6 +554,15 @@ parse_args(int argc, char **argv)
>>  			l3fwd_lpm_on = 1;
>>  			break;
>>
>> +		case '?':
>> +			/* Eventdev options are encountered skip for
>> +			 * now and processed later.
>> +			 */
>> +			evt_rsrc->args[evt_rsrc->nb_args] =
>> +				argv[optind - 1];
>> +			evt_rsrc->nb_args++;
>> +			break;
>> +
>
>All this construction with first allocating space for eventdev specific
>params
>copying them and parsing in a special function - looks like an overkill to
>me.
>Why not just to call parse_mode()/parse_eventq.. functions straight
>from here?

We were trying to make minimal changes to l3fwd but I guess we could 
have common cmdline parse functions.

>
>
>>  		/* long options */
>>  		case CMD_LINE_OPT_CONFIG_NUM:
>>  			ret = parse_config(optarg);
>> @@ -811,6 +836,7 @@ prepare_ptype_parser(uint16_t portid,
>uint16_t queueid)
>>  int
>>  main(int argc, char **argv)
>>  {
>> +	struct l3fwd_event_resources *evt_rsrc;
>>  	struct lcore_conf *qconf;
>>  	struct rte_eth_dev_info dev_info;
>>  	struct rte_eth_txconf *txconf;
>> @@ -839,11 +865,16 @@ main(int argc, char **argv)
>>  		*(uint64_t *)(val_eth + portid) =
>dest_eth_addr[portid];
>>  	}
>>
>> +	evt_rsrc = l3fwd_get_eventdev_rsrc();
>> +	RTE_SET_USED(evt_rsrc);
>>  	/* parse application arguments (after the EAL ones) */
>>  	ret = parse_args(argc, argv);
>>  	if (ret < 0)
>>  		rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
>>
>> +	/* Configure eventdev parameters if user has requested */
>> +	l3fwd_event_resource_setup();
>> +
>>  	if (check_lcore_params() < 0)
>>  		rte_exit(EXIT_FAILURE, "check_lcore_params
>failed\n");
>>
>> diff --git a/examples/l3fwd/meson.build
>b/examples/l3fwd/meson.build
>> index 6dd4b9022..864327c7b 100644
>> --- a/examples/l3fwd/meson.build
>> +++ b/examples/l3fwd/meson.build
>> @@ -6,7 +6,7 @@
>>  # To build this example as a standalone application with an already-
>installed
>>  # DPDK instance, use 'make'
>>
>> -deps += ['hash', 'lpm']
>> +deps += ['hash', 'lpm', 'eventdev']
>>  sources = files(
>> -	'l3fwd_em.c', 'l3fwd_lpm.c', 'main.c'
>> +	'l3fwd_em.c', 'l3fwd_lpm.c', 'l3fwd_event.c', 'main.c'
>>  )
>> --
>> 2.17.1



More information about the dev mailing list