[dpdk-dev] [PATCH 09/14] examples/ipsec-secgw: add eventmode to ipsec-secgw

Ananyev, Konstantin konstantin.ananyev at intel.com
Mon Jan 6 16:45:28 CET 2020


> > > Add eventmode support to ipsec-secgw. This uses event helper to setup
> > > and use the eventmode capabilities. Add driver inbound worker.
> > >
> > > Example command:
> > > ./ipsec-secgw -c 0x1 -w 0002:02:00.0,ipsec_in_max_spi=100 -w
> > > 0002:07:00.0  -w 0002:0e:00.0 -w 0002:10:00.1 -- -P -p 0x3 -u 0x1
> > > --config "(0,0,0),(1,0,0)" -f a-aes-gcm-msa.cfg --transfer-mode 1
> > > --schedule-type 2 --process-mode drv --process-dir in
> > >
> > > Signed-off-by: Anoob Joseph <anoobj at marvell.com>
> > > Signed-off-by: Lukasz Bartosik <lbartosik at marvell.com>
> > > ---
> > >  examples/ipsec-secgw/Makefile       |   1 +
> > >  examples/ipsec-secgw/event_helper.c |   3 +
> > >  examples/ipsec-secgw/event_helper.h |  26 +++
> > > examples/ipsec-secgw/ipsec-secgw.c  | 344
> > +++++++++++++++++++++++++++++++++++-
> > >  examples/ipsec-secgw/ipsec.h        |   7 +
> > >  examples/ipsec-secgw/ipsec_worker.c | 180 +++++++++++++++++++
> > >  examples/ipsec-secgw/meson.build    |   2 +-
> > >  7 files changed, 555 insertions(+), 8 deletions(-)  create mode
> > > 100644 examples/ipsec-secgw/ipsec_worker.c
> > >
> > > diff --git a/examples/ipsec-secgw/Makefile
> > > b/examples/ipsec-secgw/Makefile index 09e3c5a..f6fd94c 100644
> > > --- a/examples/ipsec-secgw/Makefile
> > > +++ b/examples/ipsec-secgw/Makefile
> > > @@ -15,6 +15,7 @@ SRCS-y += sa.c
> > >  SRCS-y += rt.c
> > >  SRCS-y += ipsec_process.c
> > >  SRCS-y += ipsec-secgw.c
> > > +SRCS-y += ipsec_worker.c
> > >  SRCS-y += event_helper.c
> > >
> > >  CFLAGS += -gdwarf-2
> > > diff --git a/examples/ipsec-secgw/event_helper.c
> > > b/examples/ipsec-secgw/event_helper.c
> > > index 6549875..44f997d 100644
> > > --- a/examples/ipsec-secgw/event_helper.c
> > > +++ b/examples/ipsec-secgw/event_helper.c
> > > @@ -984,6 +984,9 @@ eh_find_worker(uint32_t lcore_id, struct eh_conf
> > *conf,
> > >  	else
> > >  		curr_conf.cap.burst = EH_RX_TYPE_NON_BURST;
> > >
> > > +	curr_conf.cap.ipsec_mode = conf->ipsec_mode;
> > > +	curr_conf.cap.ipsec_dir = conf->ipsec_dir;
> > > +
> > >  	/* Parse the passed list and see if we have matching capabilities */
> > >
> > >  	/* Initialize the pointer used to traverse the list */ diff --git
> > > a/examples/ipsec-secgw/event_helper.h
> > > b/examples/ipsec-secgw/event_helper.h
> > > index 2895dfa..07849b0 100644
> > > --- a/examples/ipsec-secgw/event_helper.h
> > > +++ b/examples/ipsec-secgw/event_helper.h
> > > @@ -74,6 +74,22 @@ enum eh_tx_types {
> > >  	EH_TX_TYPE_NO_INTERNAL_PORT
> > >  };
> > >
> > > +/**
> > > + * Event mode ipsec mode types
> > > + */
> > > +enum eh_ipsec_mode_types {
> > > +	EH_IPSEC_MODE_TYPE_APP = 0,
> > > +	EH_IPSEC_MODE_TYPE_DRIVER
> > > +};
> > > +
> > > +/**
> > > + * Event mode ipsec direction types
> > > + */
> > > +enum eh_ipsec_dir_types {
> > > +	EH_IPSEC_DIR_TYPE_OUTBOUND = 0,
> > > +	EH_IPSEC_DIR_TYPE_INBOUND,
> > > +};
> > > +
> > >  /* Event dev params */
> > >  struct eventdev_params {
> > >  	uint8_t eventdev_id;
> > > @@ -183,6 +199,12 @@ struct eh_conf {
> > >  		 */
> > >  	void *mode_params;
> > >  		/**< Mode specific parameters */
> > > +
> > > +		/** Application specific params */
> > > +	enum eh_ipsec_mode_types ipsec_mode;
> > > +		/**< Mode of ipsec run */
> > > +	enum eh_ipsec_dir_types ipsec_dir;
> > > +		/**< Direction of ipsec processing */
> > >  };
> > >
> > >  /* Workers registered by the application */ @@ -194,6 +216,10 @@
> > > struct eh_app_worker_params {
> > >  			/**< Specify status of rx type burst */
> > >  			uint64_t tx_internal_port : 1;
> > >  			/**< Specify whether tx internal port is available */
> > > +			uint64_t ipsec_mode : 1;
> > > +			/**< Specify ipsec processing level */
> > > +			uint64_t ipsec_dir : 1;
> > > +			/**< Specify direction of ipsec */
> > >  		};
> > >  		uint64_t u64;
> > >  	} cap;
> > > diff --git a/examples/ipsec-secgw/ipsec-secgw.c
> > > b/examples/ipsec-secgw/ipsec-secgw.c
> > > index 7506922..c5d95b9 100644
> > > --- a/examples/ipsec-secgw/ipsec-secgw.c
> > > +++ b/examples/ipsec-secgw/ipsec-secgw.c
> > > @@ -2,6 +2,7 @@
> > >   * Copyright(c) 2016 Intel Corporation
> > >   */
> > >
> > > +#include <stdbool.h>
> > >  #include <stdio.h>
> > >  #include <stdlib.h>
> > >  #include <stdint.h>
> > > @@ -14,6 +15,7 @@
> > >  #include <sys/queue.h>
> > >  #include <stdarg.h>
> > >  #include <errno.h>
> > > +#include <signal.h>
> > >  #include <getopt.h>
> > >
> > >  #include <rte_common.h>
> > > @@ -41,12 +43,17 @@
> > >  #include <rte_jhash.h>
> > >  #include <rte_cryptodev.h>
> > >  #include <rte_security.h>
> > > +#include <rte_bitmap.h>
> > > +#include <rte_eventdev.h>
> > >  #include <rte_ip.h>
> > >  #include <rte_ip_frag.h>
> > >
> > > +#include "event_helper.h"
> > >  #include "ipsec.h"
> > >  #include "parser.h"
> > >
> > > +volatile bool force_quit;
> > > +
> > >  #define RTE_LOGTYPE_IPSEC RTE_LOGTYPE_USER1
> > >
> > >  #define MAX_JUMBO_PKT_LEN  9600
> > > @@ -133,12 +140,21 @@ struct flow_info
> > flow_info_tbl[RTE_MAX_ETHPORTS];
> > >  #define CMD_LINE_OPT_CONFIG		"config"
> > >  #define CMD_LINE_OPT_SINGLE_SA		"single-sa"
> > >  #define CMD_LINE_OPT_CRYPTODEV_MASK	"cryptodev_mask"
> > > +#define CMD_LINE_OPT_TRANSFER_MODE	"transfer-mode"
> > > +#define CMD_LINE_OPT_SCHEDULE_TYPE	"schedule-type"
> > > +#define CMD_LINE_OPT_IPSEC_MODE		"process-mode"
> > > +#define CMD_LINE_OPT_IPSEC_DIR		"process-dir"
> > >  #define CMD_LINE_OPT_RX_OFFLOAD		"rxoffload"
> > >  #define CMD_LINE_OPT_TX_OFFLOAD		"txoffload"
> > >  #define CMD_LINE_OPT_REASSEMBLE		"reassemble"
> > >  #define CMD_LINE_OPT_MTU		"mtu"
> > >  #define CMD_LINE_OPT_FRAG_TTL		"frag-ttl"
> > >
> > > +#define CMD_LINE_ARG_APP "app"
> > > +#define CMD_LINE_ARG_DRV "drv"
> > > +#define CMD_LINE_ARG_INB "in"
> > > +#define CMD_LINE_ARG_OUT "out"
> > > +
> > >  enum {
> > >  	/* long options mapped to a short option */
> > >
> > > @@ -149,7 +165,11 @@ enum {
> > >  	CMD_LINE_OPT_CONFIG_NUM,
> > >  	CMD_LINE_OPT_SINGLE_SA_NUM,
> > >  	CMD_LINE_OPT_CRYPTODEV_MASK_NUM,
> > > +	CMD_LINE_OPT_TRANSFER_MODE_NUM,
> > > +	CMD_LINE_OPT_SCHEDULE_TYPE_NUM,
> > >  	CMD_LINE_OPT_RX_OFFLOAD_NUM,
> > > +	CMD_LINE_OPT_IPSEC_MODE_NUM,
> > > +	CMD_LINE_OPT_IPSEC_DIR_NUM,
> > >  	CMD_LINE_OPT_TX_OFFLOAD_NUM,
> > >  	CMD_LINE_OPT_REASSEMBLE_NUM,
> > >  	CMD_LINE_OPT_MTU_NUM,
> > > @@ -160,6 +180,10 @@ static const struct option lgopts[] = {
> > >  	{CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
> > >  	{CMD_LINE_OPT_SINGLE_SA, 1, 0,
> > CMD_LINE_OPT_SINGLE_SA_NUM},
> > >  	{CMD_LINE_OPT_CRYPTODEV_MASK, 1, 0,
> > > CMD_LINE_OPT_CRYPTODEV_MASK_NUM},
> > > +	{CMD_LINE_OPT_TRANSFER_MODE, 1, 0,
> > CMD_LINE_OPT_TRANSFER_MODE_NUM},
> > > +	{CMD_LINE_OPT_SCHEDULE_TYPE, 1, 0,
> > CMD_LINE_OPT_SCHEDULE_TYPE_NUM},
> > > +	{CMD_LINE_OPT_IPSEC_MODE, 1, 0,
> > CMD_LINE_OPT_IPSEC_MODE_NUM},
> > > +	{CMD_LINE_OPT_IPSEC_DIR, 1, 0,
> > CMD_LINE_OPT_IPSEC_DIR_NUM},
> > >  	{CMD_LINE_OPT_RX_OFFLOAD, 1, 0,
> > CMD_LINE_OPT_RX_OFFLOAD_NUM},
> > >  	{CMD_LINE_OPT_TX_OFFLOAD, 1, 0,
> > CMD_LINE_OPT_TX_OFFLOAD_NUM},
> > >  	{CMD_LINE_OPT_REASSEMBLE, 1, 0,
> > CMD_LINE_OPT_REASSEMBLE_NUM}, @@
> > > -1094,8 +1118,8 @@ drain_outbound_crypto_queues(const struct
> > > lcore_conf *qconf,  }
> > >
> > >  /* main processing loop */
> > > -static int32_t
> > > -main_loop(__attribute__((unused)) void *dummy)
> > > +void
> > > +ipsec_poll_mode_worker(void)
> > >  {
> > >  	struct rte_mbuf *pkts[MAX_PKT_BURST];
> > >  	uint32_t lcore_id;
> > > @@ -1137,7 +1161,7 @@ main_loop(__attribute__((unused)) void
> > *dummy)
> > >  	if (qconf->nb_rx_queue == 0) {
> > >  		RTE_LOG(DEBUG, IPSEC, "lcore %u has nothing to do\n",
> > >  			lcore_id);
> > > -		return 0;
> > > +		return;
> > >  	}
> > >
> > >  	RTE_LOG(INFO, IPSEC, "entering main loop on lcore %u\n", lcore_id);
> > > @@ -1150,7 +1174,7 @@ main_loop(__attribute__((unused)) void
> > *dummy)
> > >  			lcore_id, portid, queueid);
> > >  	}
> > >
> > > -	while (1) {
> > > +	while (!force_quit) {
> > >  		cur_tsc = rte_rdtsc();
> > >
> > >  		/* TX queue buffer drain */
> > > @@ -1277,6 +1301,10 @@ print_usage(const char *prgname)
> > >  		" --config (port,queue,lcore)[,(port,queue,lcore)]"
> > >  		" [--single-sa SAIDX]"
> > >  		" [--cryptodev_mask MASK]"
> > > +		" [--transfer-mode MODE]"
> > > +		" [--schedule-type TYPE]"
> > > +		" [--process-mode MODE]"
> > > +		" [--process-dir DIR]"
> > >  		" [--" CMD_LINE_OPT_RX_OFFLOAD " RX_OFFLOAD_MASK]"
> > >  		" [--" CMD_LINE_OPT_TX_OFFLOAD " TX_OFFLOAD_MASK]"
> > >  		" [--" CMD_LINE_OPT_REASSEMBLE "
> > REASSEMBLE_TABLE_SIZE]"
> > > @@ -1298,6 +1326,22 @@ print_usage(const char *prgname)
> > >  		"                     bypassing the SP\n"
> > >  		"  --cryptodev_mask MASK: Hexadecimal bitmask of the
> > crypto\n"
> > >  		"                         devices to configure\n"
> > > +		"  --transfer-mode MODE\n"
> > > +		"               0: Packet transfer via polling (default)\n"
> > > +		"               1: Packet transfer via eventdev\n"
> > > +		"  --schedule-type TYPE queue schedule type, used only
> > when\n"
> > > +		"                       transfer mode is set to eventdev\n"
> > > +		"               0: Ordered (default)\n"
> > > +		"               1: Atomic\n"
> > > +		"               2: Parallel\n"
> >
> > For last two, why not something huma-readable?
> > I.E. == --tranfer-mode=(poll|event) or so.
> > Same for schedule-type.
> 
> [Anoob] Will do so in v2.
> 
> >
> > > +		"  --process-mode MODE processing mode, used only
> > when\n"
> > > +		"                      transfer mode is set to eventdev\n"
> > > +		"               \"app\" : application mode (default)\n"
> > > +		"               \"drv\" : driver mode\n"
> > > +		"  --process-dir DIR processing direction, used only when\n"
> > > +		"                    transfer mode is set to eventdev\n"
> > > +		"               \"out\" : outbound (default)\n"
> > > +		"               \"in\"  : inbound\n"
> >
> > Hmm and why in eventdev mode it is not possible to handle both inbound
> > and outbound traffic?
> > Where is the limitation: eventdev framework/PMD/ipsec-secgw?
> 
> [Anoob] It's not a limitation of any of the nodes. The current ipsec-segcw has a data path check of port to determine whether inbound or
> outbound processing need to be done.
> In case of poll-mode, we have specific cores polling fixed eth port & queue. So the extra check
> involved doesn't cost much.


> But in case of event-mode, we will have both inbound & outbound packets ending up on same core.

For poll mode we can have one core handling several ports.
Some of them could be inbound, other outbound, so it is a switch based on port value.
My thought was that the same switch based on port_id can be done in event-mode too.
But might be I am missing something here.

> So the penalty of running inbound &
> outbound at the same time (and relying on data path check) is more in case of event mode. For inline ipsec implementation, this impact isn't
> that much and we were able to minimize the perf degradation to 1%. I would expect lookaside crypto/protocol to have higher impacts.
> 
> Said that, I'm okay with removing the extra option and retaining the current behavior. If you think single instance of ipsec-secgw should
> work bidirectional, I can make the required changes and see the perf impact.

I think it would be good if event-mode could work in bi-directional way (as poll mode does),
but will leave final decision to you and other guys more familiar with event-dev details.  

> 
> >
> > >  		"  --" CMD_LINE_OPT_RX_OFFLOAD
> > >  		": bitmask of the RX HW offload capabilities to enable/use\n"
> > >  		"                         (DEV_RX_OFFLOAD_*)\n"
> > > @@ -1433,7 +1477,89 @@ print_app_sa_prm(const struct app_sa_prm
> > *prm)
> > > }
> > >
> > >  static int32_t
> > > -parse_args(int32_t argc, char **argv)
> > > +eh_parse_decimal(const char *str)
> > > +{
> > > +	unsigned long num;
> > > +	char *end = NULL;
> > > +
> > > +	num = strtoul(str, &end, 10);
> > > +	if ((str[0] == '\0') || (end == NULL) || (*end != '\0'))
> > > +		return -EINVAL;
> > > +
> > > +	return num;
> > > +}
> >
> > There already exists parse_decimal(), why to create a dup?
> 
> [Anoob] Will this in v2.
> 
> >
> > > +
> > > +static int
> > > +parse_transfer_mode(struct eh_conf *conf, const char *optarg) {
> > > +	int32_t parsed_dec;
> > > +
> > > +	parsed_dec = eh_parse_decimal(optarg);
> > > +	if (parsed_dec != EH_PKT_TRANSFER_MODE_POLL &&
> > > +	    parsed_dec != EH_PKT_TRANSFER_MODE_EVENT) {
> > > +		printf("Unsupported packet transfer mode");
> > > +		return -EINVAL;
> > > +	}
> > > +	conf->mode = parsed_dec;
> > > +	return 0;
> > > +}
> > > +
> > > +static int
> > > +parse_schedule_type(struct eh_conf *conf, const char *optarg) {
> > > +	struct eventmode_conf *em_conf = NULL;
> > > +	int32_t parsed_dec;
> > > +
> > > +	parsed_dec = eh_parse_decimal(optarg);
> > > +	if (parsed_dec != RTE_SCHED_TYPE_ORDERED &&
> > > +	    parsed_dec != RTE_SCHED_TYPE_ATOMIC &&
> > > +	    parsed_dec != RTE_SCHED_TYPE_PARALLEL)
> > > +		return -EINVAL;
> > > +
> > > +	/* Get eventmode conf */
> > > +	em_conf = (struct eventmode_conf *)(conf->mode_params);
> > > +
> > > +	em_conf->ext_params.sched_type = parsed_dec;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int
> > > +parse_ipsec_mode(struct eh_conf *conf, const char *optarg) {
> > > +	if (!strncmp(CMD_LINE_ARG_APP, optarg,
> > strlen(CMD_LINE_ARG_APP)) &&
> > > +	    strlen(optarg) == strlen(CMD_LINE_ARG_APP))
> >
> > Ugh, that's an ugly construction, why not just:
> > if (strcmp(CMD_LINE_ARG_APP, optarg) == 0) ?
> 
> [Anoob] Will fix this in v2.
> 
> >
> > > +		conf->ipsec_mode = EH_IPSEC_MODE_TYPE_APP;
> > > +	else if (!strncmp(CMD_LINE_ARG_DRV, optarg,
> > strlen(CMD_LINE_ARG_DRV)) &&
> > > +		 strlen(optarg) == strlen(CMD_LINE_ARG_DRV))
> > > +		conf->ipsec_mode = EH_IPSEC_MODE_TYPE_DRIVER;
> > > +	else {
> > > +		printf("Unsupported ipsec mode\n");
> > > +		return -EINVAL;
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int
> > > +parse_ipsec_dir(struct eh_conf *conf, const char *optarg) {
> > > +	if (!strncmp(CMD_LINE_ARG_INB, optarg,
> > strlen(CMD_LINE_ARG_INB)) &&
> > > +	    strlen(optarg) == strlen(CMD_LINE_ARG_INB))
> > > +		conf->ipsec_dir = EH_IPSEC_DIR_TYPE_INBOUND;
> > > +	else if (!strncmp(CMD_LINE_ARG_OUT, optarg,
> > strlen(CMD_LINE_ARG_OUT)) &&
> > > +		 strlen(optarg) == strlen(CMD_LINE_ARG_OUT))
> > > +		conf->ipsec_dir = EH_IPSEC_DIR_TYPE_OUTBOUND;
> > > +	else {
> > > +		printf("Unsupported ipsec direction\n");
> > > +		return -EINVAL;
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int32_t
> > > +parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
> > >  {
> > >  	int opt;
> > >  	int64_t ret;
> > > @@ -1536,6 +1662,43 @@ parse_args(int32_t argc, char **argv)
> > >  			/* else */
> > >  			enabled_cryptodev_mask = ret;
> > >  			break;
> > > +
> > > +		case CMD_LINE_OPT_TRANSFER_MODE_NUM:
> > > +			ret = parse_transfer_mode(eh_conf, optarg);
> > > +			if (ret < 0) {
> > > +				printf("Invalid packet transfer mode\n");
> > > +				print_usage(prgname);
> > > +				return -1;
> > > +			}
> > > +			break;
> > > +
> > > +		case CMD_LINE_OPT_SCHEDULE_TYPE_NUM:
> > > +			ret = parse_schedule_type(eh_conf, optarg);
> > > +			if (ret < 0) {
> > > +				printf("Invalid queue schedule type\n");
> > > +				print_usage(prgname);
> > > +				return -1;
> > > +			}
> > > +			break;
> > > +
> > > +		case CMD_LINE_OPT_IPSEC_MODE_NUM:
> > > +			ret = parse_ipsec_mode(eh_conf, optarg);
> > > +			if (ret < 0) {
> > > +				printf("Invalid ipsec mode\n");
> > > +				print_usage(prgname);
> > > +				return -1;
> > > +			}
> > > +			break;
> > > +
> > > +		case CMD_LINE_OPT_IPSEC_DIR_NUM:
> > > +			ret = parse_ipsec_dir(eh_conf, optarg);
> > > +			if (ret < 0) {
> > > +				printf("Invalid ipsec direction\n");
> > > +				print_usage(prgname);
> > > +				return -1;
> > > +			}
> > > +			break;
> > > +
> > >  		case CMD_LINE_OPT_RX_OFFLOAD_NUM:
> > >  			ret = parse_mask(optarg, &dev_rx_offload);
> > >  			if (ret != 0) {
> > > @@ -2457,6 +2620,132 @@ create_default_ipsec_flow(uint16_t port_id,
> > uint64_t rx_offloads)
> > >  	return ret;
> > >  }
> > >
> > > +static struct eh_conf *
> > > +eh_conf_init(void)
> > > +{
> > > +	struct eventmode_conf *em_conf = NULL;
> > > +	struct eh_conf *conf = NULL;
> > > +	unsigned int eth_core_id;
> > > +	uint32_t nb_bytes;
> > > +	void *mem = NULL;
> > > +
> > > +	/* Allocate memory for config */
> > > +	conf = calloc(1, sizeof(struct eh_conf));
> > > +	if (conf == NULL) {
> > > +		printf("Failed to allocate memory for eventmode helper
> > conf");
> > > +		goto err;
> > > +	}
> > > +
> > > +	/* Set default conf */
> > > +
> > > +	/* Packet transfer mode: poll */
> > > +	conf->mode = EH_PKT_TRANSFER_MODE_POLL;
> > > +	conf->ipsec_mode = EH_IPSEC_MODE_TYPE_APP;
> > > +	conf->ipsec_dir = EH_IPSEC_DIR_TYPE_OUTBOUND;
> > > +
> > > +	/* Keep all ethernet ports enabled by default */
> > > +	conf->eth_portmask = -1;
> > > +
> > > +	/* Allocate memory for event mode params */
> > > +	conf->mode_params =
> > > +		calloc(1, sizeof(struct eventmode_conf));
> > > +	if (conf->mode_params == NULL) {
> > > +		printf("Failed to allocate memory for event mode params");
> > > +		goto err;
> > > +	}
> > > +
> > > +	/* Get eventmode conf */
> > > +	em_conf = (struct eventmode_conf *)(conf->mode_params);
> > > +
> > > +	/* Allocate and initialize bitmap for eth cores */
> > > +	nb_bytes = rte_bitmap_get_memory_footprint(RTE_MAX_LCORE);
> > > +	if (!nb_bytes) {
> > > +		printf("Failed to get bitmap footprint");
> > > +		goto err;
> > > +	}
> > > +
> > > +	mem = rte_zmalloc("event-helper-ethcore-bitmap", nb_bytes,
> > > +			  RTE_CACHE_LINE_SIZE);
> > > +	if (!mem) {
> > > +		printf("Failed to allocate memory for eth cores bitmap\n");
> > > +		goto err;
> > > +	}
> > > +
> > > +	em_conf->eth_core_mask = rte_bitmap_init(RTE_MAX_LCORE,
> > mem, nb_bytes);
> > > +	if (!em_conf->eth_core_mask) {
> > > +		printf("Failed to initialize bitmap");
> > > +		goto err;
> > > +	}
> > > +
> > > +	/* Schedule type: ordered */
> > > +	em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
> > > +
> > > +	/* Set two cores as eth cores for Rx & Tx */
> > > +
> > > +	/* Use first core other than master core as Rx core */
> > > +	eth_core_id = rte_get_next_lcore(0,	/* curr core */
> > > +					 1,	/* skip master core */
> > > +					 0	/* wrap */);
> > > +
> > > +	rte_bitmap_set(em_conf->eth_core_mask, eth_core_id);
> > > +
> > > +	/* Use next core as Tx core */
> > > +	eth_core_id = rte_get_next_lcore(eth_core_id,	/* curr core
> > */
> > > +					 1,		/* skip master core */
> > > +					 0		/* wrap */);
> > > +
> > > +	rte_bitmap_set(em_conf->eth_core_mask, eth_core_id);
> > > +
> > > +	return conf;
> > > +err:
> > > +	rte_free(mem);
> > > +	free(em_conf);
> > > +	free(conf);
> > > +	return NULL;
> > > +}
> > > +
> > > +static void
> > > +eh_conf_uninit(struct eh_conf *conf)
> > > +{
> > > +	struct eventmode_conf *em_conf = NULL;
> > > +
> > > +	/* Get eventmode conf */
> > > +	em_conf = (struct eventmode_conf *)(conf->mode_params);
> > > +
> > > +	/* Free evenmode configuration memory */
> > > +	rte_free(em_conf->eth_core_mask);
> > > +	free(em_conf);
> > > +	free(conf);
> > > +}
> > > +
> > > +static void
> > > +signal_handler(int signum)
> > > +{
> > > +	if (signum == SIGINT || signum == SIGTERM) {
> > > +		uint16_t port_id;
> > > +		printf("\n\nSignal %d received, preparing to exit...\n",
> > > +				signum);
> > > +		force_quit = true;
> > > +
> > > +		/* Destroy the default ipsec flow */
> > > +		RTE_ETH_FOREACH_DEV(port_id) {
> > > +			if ((enabled_port_mask & (1 << port_id)) == 0)
> > > +				continue;
> > > +			if (flow_info_tbl[port_id].rx_def_flow) {
> > > +				struct rte_flow_error err;
> > > +				int ret;
> >
> > As we are going to call dev_stop(), etc. at force_quit below, is there any
> > reason to call rte_flow_destroy() here?
> > Just curious.
> 
> [Anoob] dev_stop() should clear all the rte_flow entries. But doing it from the app as a good citizen. 😊
> 
> I can remove it since the same is not done for SA specific rte_flows created for inline crypto.

No need to remove.
My question was just stylish one:
why not to do it at the same place where dev_stop()/dev_close() is done,
to have everything in one place.

> 
> >
> > > +				ret = rte_flow_destroy(port_id,
> > > +					flow_info_tbl[port_id].rx_def_flow,
> > > +					&err);
> > > +				if (ret)
> > > +					RTE_LOG(ERR, IPSEC,
> > > +					"Failed to destroy flow for port %u, "
> > > +					"err msg: %s\n", port_id,
> > err.message);
> > > +			}
> > > +		}
> > > +	}
> > > +}
> > > +
> > >  int32_t
> > >  main(int32_t argc, char **argv)
> > >  {
> > > @@ -2466,6 +2755,7 @@ main(int32_t argc, char **argv)
> > >  	uint8_t socket_id;
> > >  	uint16_t portid;
> > >  	uint64_t req_rx_offloads, req_tx_offloads;
> > > +	struct eh_conf *eh_conf = NULL;
> > >  	size_t sess_sz;
> > >
> > >  	/* init EAL */
> > > @@ -2475,8 +2765,17 @@ main(int32_t argc, char **argv)
> > >  	argc -= ret;
> > >  	argv += ret;
> > >
> > > +	force_quit = false;
> > > +	signal(SIGINT, signal_handler);
> > > +	signal(SIGTERM, signal_handler);
> > > +
> > > +	/* initialize event helper configuration */
> > > +	eh_conf = eh_conf_init();
> > > +	if (eh_conf == NULL)
> > > +		rte_exit(EXIT_FAILURE, "Failed to init event helper config");
> > > +
> > >  	/* parse application arguments (after the EAL ones) */
> > > -	ret = parse_args(argc, argv);
> > > +	ret = parse_args(argc, argv, eh_conf);
> > >  	if (ret < 0)
> > >  		rte_exit(EXIT_FAILURE, "Invalid parameters\n");
> > >
> > > @@ -2592,12 +2891,43 @@ main(int32_t argc, char **argv)
> > >
> > >  	check_all_ports_link_status(enabled_port_mask);
> > >
> > > +	/*
> > > +	 * Set the enabled port mask in helper config for use by helper
> > > +	 * sub-system. This will be used while intializing devices using
> > > +	 * helper sub-system.
> > > +	 */
> > > +	eh_conf->eth_portmask = enabled_port_mask;
> > > +
> > > +	/* Initialize eventmode components */
> > > +	ret = eh_devs_init(eh_conf);
> > > +	if (ret < 0)
> > > +		rte_exit(EXIT_FAILURE, "eh_devs_init failed, err=%d\n",
> > ret);
> > > +
> > >  	/* launch per-lcore init on every lcore */
> > > -	rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
> > > +	rte_eal_mp_remote_launch(ipsec_launch_one_lcore, eh_conf,
> > > +CALL_MASTER);
> > > +
> > >  	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
> > >  		if (rte_eal_wait_lcore(lcore_id) < 0)
> > >  			return -1;
> > >  	}
> > >
> > > +	/* Uninitialize eventmode components */
> > > +	ret = eh_devs_uninit(eh_conf);
> > > +	if (ret < 0)
> > > +		rte_exit(EXIT_FAILURE, "eh_devs_uninit failed, err=%d\n",
> > ret);
> > > +
> > > +	/* Free eventmode configuration memory */
> > > +	eh_conf_uninit(eh_conf);
> > > +
> > > +	RTE_ETH_FOREACH_DEV(portid) {
> > > +		if ((enabled_port_mask & (1 << portid)) == 0)
> > > +			continue;
> > > +		printf("Closing port %d...", portid);
> > > +		rte_eth_dev_stop(portid);
> > > +		rte_eth_dev_close(portid);
> > > +		printf(" Done\n");
> > > +	}
> > > +	printf("Bye...\n");
> > > +
> > >  	return 0;
> > >  }


More information about the dev mailing list