[dpdk-dev] [EXT] RE: [PATCH v2 09/12] examples/ipsec-secgw: add eventmode to ipsec-secgw
Lukas Bartosik
lbartosik at marvell.com
Thu Jan 30 12:04:57 CET 2020
Hi Konstantin,
Please see inline.
Thanks,
Lukasz
On 30.01.2020 00:31, Ananyev, Konstantin wrote:
> External Email
>
> ----------------------------------------------------------------------
>> Add eventmode support to ipsec-secgw. With the aid of event helper
>> configure and use the eventmode capabilities.
>>
>> Signed-off-by: Anoob Joseph <anoobj at marvell.com>
>> Signed-off-by: Lukasz Bartosik <lbartosik at marvell.com>
>> ---
>> examples/ipsec-secgw/event_helper.c | 4 +-
>> examples/ipsec-secgw/event_helper.h | 14 ++
>> examples/ipsec-secgw/ipsec-secgw.c | 341 +++++++++++++++++++++++++++++++++++-
>> examples/ipsec-secgw/ipsec.h | 11 ++
>> examples/ipsec-secgw/sa.c | 11 --
>> 5 files changed, 365 insertions(+), 16 deletions(-)
>>
>> diff --git a/examples/ipsec-secgw/event_helper.c b/examples/ipsec-secgw/event_helper.c
>> index 9719ab4..54a98c9 100644
>> --- a/examples/ipsec-secgw/event_helper.c
>> +++ b/examples/ipsec-secgw/event_helper.c
>> @@ -966,6 +966,8 @@ eh_find_worker(uint32_t lcore_id, struct eh_conf *conf,
>> else
>> curr_conf.cap.burst = EH_RX_TYPE_NON_BURST;
>>
>> + curr_conf.cap.ipsec_mode = conf->ipsec_mode;
>> +
>> /* Parse the passed list and see if we have matching capabilities */
>>
>> /* Initialize the pointer used to traverse the list */
>> @@ -1625,7 +1627,7 @@ eh_launch_worker(struct eh_conf *conf, struct eh_app_worker_params *app_wrkr,
>> }
>>
>> /* Get eventmode conf */
>> - em_conf = (struct eventmode_conf *)(conf->mode_params);
>> + em_conf = conf->mode_params;
>>
>> /* Get core ID */
>> lcore_id = rte_lcore_id();
>> diff --git a/examples/ipsec-secgw/event_helper.h b/examples/ipsec-secgw/event_helper.h
>> index 15a7bd6..cf5d346 100644
>> --- a/examples/ipsec-secgw/event_helper.h
>> +++ b/examples/ipsec-secgw/event_helper.h
>> @@ -74,6 +74,14 @@ enum eh_tx_types {
>> EH_TX_TYPE_NO_INTERNAL_PORT
>> };
>>
>> +/**
>> + * Event mode ipsec mode types
>> + */
>> +enum eh_ipsec_mode_types {
>> + EH_IPSEC_MODE_TYPE_APP = 0,
>> + EH_IPSEC_MODE_TYPE_DRIVER
>> +};
>> +
>> /* Event dev params */
>> struct eventdev_params {
>> uint8_t eventdev_id;
>> @@ -183,6 +191,10 @@ struct eh_conf {
>> */
>> void *mode_params;
>> /**< Mode specific parameters */
>> +
>> + /** Application specific params */
>> + enum eh_ipsec_mode_types ipsec_mode;
>> + /**< Mode of ipsec run */
>> };
>>
>> /* Workers registered by the application */
>> @@ -194,6 +206,8 @@ struct eh_app_worker_params {
>> /**< Specify status of rx type burst */
>> uint64_t tx_internal_port : 1;
>> /**< Specify whether tx internal port is available */
>> + uint64_t ipsec_mode : 1;
>> + /**< Specify ipsec processing level */
>> };
>> uint64_t u64;
>> } cap;
>> diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
>> index d5e8fe5..f1cc3fb 100644
>> --- a/examples/ipsec-secgw/ipsec-secgw.c
>> +++ b/examples/ipsec-secgw/ipsec-secgw.c
>> @@ -2,6 +2,7 @@
>> * Copyright(c) 2016 Intel Corporation
>> */
>>
>> +#include <stdbool.h>
>> #include <stdio.h>
>> #include <stdlib.h>
>> #include <stdint.h>
>> @@ -14,6 +15,7 @@
>> #include <sys/queue.h>
>> #include <stdarg.h>
>> #include <errno.h>
>> +#include <signal.h>
>> #include <getopt.h>
>>
>> #include <rte_common.h>
>> @@ -41,12 +43,17 @@
>> #include <rte_jhash.h>
>> #include <rte_cryptodev.h>
>> #include <rte_security.h>
>> +#include <rte_bitmap.h>
>> +#include <rte_eventdev.h>
>> #include <rte_ip.h>
>> #include <rte_ip_frag.h>
>>
>> +#include "event_helper.h"
>> #include "ipsec.h"
>> #include "parser.h"
>>
>> +volatile bool force_quit;
>> +
>> #define RTE_LOGTYPE_IPSEC RTE_LOGTYPE_USER1
>>
>> #define MAX_JUMBO_PKT_LEN 9600
>> @@ -133,12 +140,20 @@ struct flow_info flow_info_tbl[RTE_MAX_ETHPORTS];
>> #define CMD_LINE_OPT_CONFIG "config"
>> #define CMD_LINE_OPT_SINGLE_SA "single-sa"
>> #define CMD_LINE_OPT_CRYPTODEV_MASK "cryptodev_mask"
>> +#define CMD_LINE_OPT_TRANSFER_MODE "transfer-mode"
>> +#define CMD_LINE_OPT_SCHEDULE_TYPE "schedule-type"
>> #define CMD_LINE_OPT_RX_OFFLOAD "rxoffload"
>> #define CMD_LINE_OPT_TX_OFFLOAD "txoffload"
>> #define CMD_LINE_OPT_REASSEMBLE "reassemble"
>> #define CMD_LINE_OPT_MTU "mtu"
>> #define CMD_LINE_OPT_FRAG_TTL "frag-ttl"
>>
>> +#define CMD_LINE_ARG_EVENT "event"
>> +#define CMD_LINE_ARG_POLL "poll"
>> +#define CMD_LINE_ARG_ORDERED "ordered"
>> +#define CMD_LINE_ARG_ATOMIC "atomic"
>> +#define CMD_LINE_ARG_PARALLEL "parallel"
>> +
>> enum {
>> /* long options mapped to a short option */
>>
>> @@ -149,6 +164,8 @@ enum {
>> CMD_LINE_OPT_CONFIG_NUM,
>> CMD_LINE_OPT_SINGLE_SA_NUM,
>> CMD_LINE_OPT_CRYPTODEV_MASK_NUM,
>> + CMD_LINE_OPT_TRANSFER_MODE_NUM,
>> + CMD_LINE_OPT_SCHEDULE_TYPE_NUM,
>> CMD_LINE_OPT_RX_OFFLOAD_NUM,
>> CMD_LINE_OPT_TX_OFFLOAD_NUM,
>> CMD_LINE_OPT_REASSEMBLE_NUM,
>> @@ -160,6 +177,8 @@ static const struct option lgopts[] = {
>> {CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
>> {CMD_LINE_OPT_SINGLE_SA, 1, 0, CMD_LINE_OPT_SINGLE_SA_NUM},
>> {CMD_LINE_OPT_CRYPTODEV_MASK, 1, 0, CMD_LINE_OPT_CRYPTODEV_MASK_NUM},
>> + {CMD_LINE_OPT_TRANSFER_MODE, 1, 0, CMD_LINE_OPT_TRANSFER_MODE_NUM},
>> + {CMD_LINE_OPT_SCHEDULE_TYPE, 1, 0, CMD_LINE_OPT_SCHEDULE_TYPE_NUM},
>> {CMD_LINE_OPT_RX_OFFLOAD, 1, 0, CMD_LINE_OPT_RX_OFFLOAD_NUM},
>> {CMD_LINE_OPT_TX_OFFLOAD, 1, 0, CMD_LINE_OPT_TX_OFFLOAD_NUM},
>> {CMD_LINE_OPT_REASSEMBLE, 1, 0, CMD_LINE_OPT_REASSEMBLE_NUM},
>> @@ -177,6 +196,7 @@ static int32_t numa_on = 1; /**< NUMA is enabled by default. */
>> static uint32_t nb_lcores;
>> static uint32_t single_sa;
>> static uint32_t single_sa_idx;
>> +static uint32_t schedule_type;
>>
>> /*
>> * RX/TX HW offload capabilities to enable/use on ethernet ports.
>> @@ -1185,7 +1205,7 @@ main_loop(__attribute__((unused)) void *dummy)
>> }
>>
>> static int32_t
>> -check_params(void)
>> +check_params(struct eh_conf *eh_conf)
>> {
>> uint8_t lcore;
>> uint16_t portid;
>> @@ -1220,6 +1240,14 @@ check_params(void)
>> return -1;
>> }
>> }
>> +
>> + if (eh_conf->mode == EH_PKT_TRANSFER_MODE_POLL) {
>> + if (schedule_type) {
>> + printf("error: option --schedule-type applies only to event mode\n");
>> + return -1;
>> + }
>> + }
>
> As a nit - might be better to keep check_params() intact,
> and put this new check above into a separate function?
> check_eh_conf() or so?
[Lukasz] I will put the check into new check_eh_conf() function.
> Another thing it seems a bit clumsy construction to have global var (scheduler_type)
> just to figure out was particular option present on command line or not.
> Probably simler way to avoid it - set initially em_conf->ext_params.sched_type to
> some invalid value (-1 or so). Then after parse args you can check did its value
> change or not.
[Lukasz] I will change it in V3.
> As alternative thought: wouldn't it be better to unite both --transfer-mode
> and --schedule-type options into one?
> Then possible values for this unite option would be:
> "poll"
> "event" (expands to "event-ordered")
> "event-ordered"
> "event-atomic"
> "event-parallel"
> And this situation you are checking above simply wouldn't be possible.
> Again probably would be easier/simpler for users.
[Lukasz] I would rather not combine event mode parameters into one for two reason:
- to be consistent with poll where one configuration item is controlled with one option,
- if we come up with a need to add a new event mode parameter in future then we
we will need to split event-ordered back to --transfer-mode and --schedule-type
to be consistent with how with provide event mode command line options.
>
>> +
>> return 0;
>> }
>>
>> @@ -1277,6 +1305,8 @@ print_usage(const char *prgname)
>> " --config (port,queue,lcore)[,(port,queue,lcore)]"
>> " [--single-sa SAIDX]"
>> " [--cryptodev_mask MASK]"
>> + " [--transfer-mode MODE]"
>> + " [--schedule-type TYPE]"
>> " [--" CMD_LINE_OPT_RX_OFFLOAD " RX_OFFLOAD_MASK]"
>> " [--" CMD_LINE_OPT_TX_OFFLOAD " TX_OFFLOAD_MASK]"
>> " [--" CMD_LINE_OPT_REASSEMBLE " REASSEMBLE_TABLE_SIZE]"
>> @@ -1298,6 +1328,14 @@ print_usage(const char *prgname)
>> " bypassing the SP\n"
>> " --cryptodev_mask MASK: Hexadecimal bitmask of the crypto\n"
>> " devices to configure\n"
>> + " --transfer-mode MODE\n"
>> + " \"poll\" : Packet transfer via polling (default)\n"
>> + " \"event\" : Packet transfer via event device\n"
>> + " --schedule-type TYPE queue schedule type, used only when\n"
>> + " transfer mode is set to event\n"
>> + " \"ordered\" : Ordered (default)\n"
>> + " \"atomic\" : Atomic\n"
>> + " \"parallel\" : Parallel\n"
>> " --" CMD_LINE_OPT_RX_OFFLOAD
>> ": bitmask of the RX HW offload capabilities to enable/use\n"
>> " (DEV_RX_OFFLOAD_*)\n"
>> @@ -1432,8 +1470,45 @@ print_app_sa_prm(const struct app_sa_prm *prm)
>> printf("Frag TTL: %" PRIu64 " ns\n", frag_ttl_ns);
>> }
>>
>> +static int
>> +parse_transfer_mode(struct eh_conf *conf, const char *optarg)
>> +{
>> + if (!strcmp(CMD_LINE_ARG_POLL, optarg))
>> + conf->mode = EH_PKT_TRANSFER_MODE_POLL;
>> + else if (!strcmp(CMD_LINE_ARG_EVENT, optarg))
>> + conf->mode = EH_PKT_TRANSFER_MODE_EVENT;
>> + else {
>> + printf("Unsupported packet transfer mode\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +parse_schedule_type(struct eh_conf *conf, const char *optarg)
>> +{
>> + struct eventmode_conf *em_conf = NULL;
>> +
>> + /* Get eventmode conf */
>> + em_conf = conf->mode_params;
>> +
>> + if (!strcmp(CMD_LINE_ARG_ORDERED, optarg))
>> + em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
>> + else if (!strcmp(CMD_LINE_ARG_ATOMIC, optarg))
>> + em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ATOMIC;
>> + else if (!strcmp(CMD_LINE_ARG_PARALLEL, optarg))
>> + em_conf->ext_params.sched_type = RTE_SCHED_TYPE_PARALLEL;
>> + else {
>> + printf("Unsupported queue schedule type\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> static int32_t
>> -parse_args(int32_t argc, char **argv)
>> +parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
>> {
>> int opt;
>> int64_t ret;
>> @@ -1522,6 +1597,7 @@ parse_args(int32_t argc, char **argv)
>> /* else */
>> single_sa = 1;
>> single_sa_idx = ret;
>> + eh_conf->ipsec_mode = EH_IPSEC_MODE_TYPE_DRIVER;
>> printf("Configured with single SA index %u\n",
>> single_sa_idx);
>> break;
>> @@ -1536,6 +1612,26 @@ parse_args(int32_t argc, char **argv)
>> /* else */
>> enabled_cryptodev_mask = ret;
>> break;
>> +
>> + case CMD_LINE_OPT_TRANSFER_MODE_NUM:
>> + ret = parse_transfer_mode(eh_conf, optarg);
>> + if (ret < 0) {
>> + printf("Invalid packet transfer mode\n");
>> + print_usage(prgname);
>> + return -1;
>> + }
>> + break;
>> +
>> + case CMD_LINE_OPT_SCHEDULE_TYPE_NUM:
>> + ret = parse_schedule_type(eh_conf, optarg);
>> + if (ret < 0) {
>> + printf("Invalid queue schedule type\n");
>> + print_usage(prgname);
>> + return -1;
>> + }
>> + schedule_type = 1;
>> + break;
>> +
>> case CMD_LINE_OPT_RX_OFFLOAD_NUM:
>> ret = parse_mask(optarg, &dev_rx_offload);
>> if (ret != 0) {
>> @@ -2450,16 +2546,176 @@ create_default_ipsec_flow(uint16_t port_id, uint64_t rx_offloads)
>> port_id);
>> }
>>
>
> Wouldn't it be more natural to have these 2 functions below
> (eh_conf_init(), eh_conf_uninit()) defined inside event_helper.c?
>
[Lukasz] I will move these functions to event_helper.c.
>> +static struct eh_conf *
>> +eh_conf_init(void)
>> +{
>> + struct eventmode_conf *em_conf = NULL;
>> + struct eh_conf *conf = NULL;
>> + unsigned int eth_core_id;
>> + uint32_t nb_bytes;
>> + void *mem = NULL;
>> +
>> + /* Allocate memory for config */
>> + conf = calloc(1, sizeof(struct eh_conf));
>> + if (conf == NULL) {
>> + printf("Failed to allocate memory for eventmode helper conf");
>> + goto err;
>> + }
>> +
>> + /* Set default conf */
>> +
>> + /* Packet transfer mode: poll */
>> + conf->mode = EH_PKT_TRANSFER_MODE_POLL;
>> + conf->ipsec_mode = EH_IPSEC_MODE_TYPE_APP;
>> +
>> + /* Keep all ethernet ports enabled by default */
>> + conf->eth_portmask = -1;
>> +
>> + /* Allocate memory for event mode params */
>> + conf->mode_params = calloc(1, sizeof(struct eventmode_conf));
>> + if (conf->mode_params == NULL) {
>> + printf("Failed to allocate memory for event mode params");
>> + goto err;
>> + }
>> +
>> + /* Get eventmode conf */
>> + em_conf = conf->mode_params;
>> +
>> + /* Allocate and initialize bitmap for eth cores */
>> + nb_bytes = rte_bitmap_get_memory_footprint(RTE_MAX_LCORE);
>> + if (!nb_bytes) {
>> + printf("Failed to get bitmap footprint");
>> + goto err;
>> + }
>> +
>> + mem = rte_zmalloc("event-helper-ethcore-bitmap", nb_bytes,
>> + RTE_CACHE_LINE_SIZE);
>> + if (!mem) {
>> + printf("Failed to allocate memory for eth cores bitmap\n");
>> + goto err;
>> + }
>> +
>> + em_conf->eth_core_mask = rte_bitmap_init(RTE_MAX_LCORE, mem, nb_bytes);
>> + if (!em_conf->eth_core_mask) {
>> + printf("Failed to initialize bitmap");
>> + goto err;
>> + }
>> +
>> + /* Schedule type: ordered */
>> + em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
>> +
>> + /* Set two cores as eth cores for Rx & Tx */
>> +
>> + /* Use first core other than master core as Rx core */
>> + eth_core_id = rte_get_next_lcore(0, /* curr core */
>> + 1, /* skip master core */
>> + 0 /* wrap */);
>> +
>> + rte_bitmap_set(em_conf->eth_core_mask, eth_core_id);
>> +
>> + /* Use next core as Tx core */
>> + eth_core_id = rte_get_next_lcore(eth_core_id, /* curr core */
>> + 1, /* skip master core */
>> + 0 /* wrap */);
>> +
>> + rte_bitmap_set(em_conf->eth_core_mask, eth_core_id);
>> +
>> + return conf;
>> +err:
>> + rte_free(mem);
>> + free(em_conf);
>> + free(conf);
>> + return NULL;
>> +}
>> +
>> +static void
>> +eh_conf_uninit(struct eh_conf *conf)
>> +{
>> + struct eventmode_conf *em_conf = NULL;
>> +
>> + /* Get eventmode conf */
>> + em_conf = conf->mode_params;
>> +
>> + /* Free evenmode configuration memory */
>> + rte_free(em_conf->eth_core_mask);
>> + free(em_conf);
>> + free(conf);
>> +}
>> +
>> +static void
>> +signal_handler(int signum)
>> +{
>> + if (signum == SIGINT || signum == SIGTERM) {
>> + printf("\n\nSignal %d received, preparing to exit...\n",
>> + signum);
>> + force_quit = true;
>> + }
>> +}
>> +
>> +static void
>> +inline_sessions_free(struct sa_ctx *sa_ctx)
>> +{
>> + struct rte_ipsec_session *ips;
>> + struct ipsec_sa *sa;
>> + int32_t i, ret;
>> +
>> + for (i = 0; i < IPSEC_SA_MAX_ENTRIES; i++) {
>> +
>> + sa = &sa_ctx->sa[i];
>> + if (!sa->spi)
>> + continue;
>> +
>> + ips = ipsec_get_primary_session(sa);
>> + if (ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL &&
>> + ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO)
>> + continue;
>> +
>> + ret = rte_security_session_destroy(
>> + rte_eth_dev_get_sec_ctx(sa->portid),
>> + ips->security.ses);
>> + if (ret)
>> + RTE_LOG(ERR, IPSEC, "Failed to destroy security "
>> + "session type %d, spi %d\n",
>> + ips->type, sa->spi);
>> + }
>> +}
>> +
>> +static void
>> +ev_mode_sess_verify(struct sa_ctx *sa_ctx)
>> +{
>> + struct rte_ipsec_session *ips;
>> + struct ipsec_sa *sa;
>> + int32_t i;
>> +
>> + if (!sa_ctx)
>> + return;
>> +
>> + for (i = 0; i < IPSEC_SA_MAX_ENTRIES; i++) {
>> +
>> + sa = &sa_ctx->sa[i];
>> + if (!sa->spi)
>> + continue;
>> +
>> + ips = ipsec_get_primary_session(sa);
>> + if (ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)
>> + rte_exit(EXIT_FAILURE, "Event mode supports only "
>> + "inline protocol sessions\n");
>
> As I understand at that moment inline sessions already created on devices?
> For consistency wouldn't it be better to do this check at parsing cfg file,
> or straight after it?
>
[Lukasz] I will move this check to be done after parsing cfg file into check_eh_conf() function.
>> + }
>> +
>> +}
>> +
>> int32_t
>> main(int32_t argc, char **argv)
>> {
>> int32_t ret;
>> uint32_t lcore_id;
>> + uint32_t cdev_id;
>> uint32_t i;
>> uint8_t socket_id;
>> uint16_t portid;
>> uint64_t req_rx_offloads[RTE_MAX_ETHPORTS];
>> uint64_t req_tx_offloads[RTE_MAX_ETHPORTS];
>> + struct eh_conf *eh_conf = NULL;
>> size_t sess_sz;
>>
>> /* init EAL */
>> @@ -2469,8 +2725,17 @@ main(int32_t argc, char **argv)
>> argc -= ret;
>> argv += ret;
>>
>> + force_quit = false;
>> + signal(SIGINT, signal_handler);
>> + signal(SIGTERM, signal_handler);
>> +
>> + /* initialize event helper configuration */
>> + eh_conf = eh_conf_init();
>> + if (eh_conf == NULL)
>> + rte_exit(EXIT_FAILURE, "Failed to init event helper config");
>> +
>> /* parse application arguments (after the EAL ones) */
>> - ret = parse_args(argc, argv);
>> + ret = parse_args(argc, argv, eh_conf);
>> if (ret < 0)
>> rte_exit(EXIT_FAILURE, "Invalid parameters\n");
>>
>> @@ -2487,7 +2752,7 @@ main(int32_t argc, char **argv)
>> rte_exit(EXIT_FAILURE, "Invalid unprotected portmask 0x%x\n",
>> unprotected_port_mask);
>>
>> - if (check_params() < 0)
>> + if (check_params(eh_conf) < 0)
>> rte_exit(EXIT_FAILURE, "check_params failed\n");
>>
>> ret = init_lcore_rx_queues();
>> @@ -2529,6 +2794,18 @@ main(int32_t argc, char **argv)
>>
>> cryptodevs_init();
>>
>> + /*
>> + * Set the enabled port mask in helper config for use by helper
>> + * sub-system. This will be used while initializing devices using
>> + * helper sub-system.
>> + */
>> + eh_conf->eth_portmask = enabled_port_mask;
>> +
>> + /* Initialize eventmode components */
>> + ret = eh_devs_init(eh_conf);
>> + if (ret < 0)
>> + rte_exit(EXIT_FAILURE, "eh_devs_init failed, err=%d\n", ret);
>> +
>> /* start ports */
>> RTE_ETH_FOREACH_DEV(portid) {
>> if ((enabled_port_mask & (1 << portid)) == 0)
>> @@ -2576,6 +2853,18 @@ main(int32_t argc, char **argv)
>> sp4_init(&socket_ctx[socket_id], socket_id);
>> sp6_init(&socket_ctx[socket_id], socket_id);
>> rt_init(&socket_ctx[socket_id], socket_id);
>> +
>> + /*
>> + * Event mode currently supports only inline protocol
>> + * sessions. If there are other types of sessions
>> + * configured then exit with error.
>> + */
>> + if (eh_conf->mode == EH_PKT_TRANSFER_MODE_EVENT) {
>> + ev_mode_sess_verify(
>> + socket_ctx[socket_id].sa_in);
>> + ev_mode_sess_verify(
>> + socket_ctx[socket_id].sa_out);
>> + }
>> }
>> }
>>
>> @@ -2583,10 +2872,54 @@ main(int32_t argc, char **argv)
>>
>> /* launch per-lcore init on every lcore */
>> rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
>> +
>> RTE_LCORE_FOREACH_SLAVE(lcore_id) {
>> if (rte_eal_wait_lcore(lcore_id) < 0)
>> return -1;
>> }
>>
>> + /* Uninitialize eventmode components */
>> + ret = eh_devs_uninit(eh_conf);
>> + if (ret < 0)
>> + rte_exit(EXIT_FAILURE, "eh_devs_uninit failed, err=%d\n", ret);
>> +
>> + /* Free eventmode configuration memory */
>> + eh_conf_uninit(eh_conf);
>> +
>> + /* Destroy inline inbound and outbound sessions */
>> + for (i = 0; i < NB_SOCKETS && i < rte_socket_count(); i++) {
>> + socket_id = rte_socket_id_by_idx(i);
>> + inline_sessions_free(socket_ctx[socket_id].sa_in);
>
> That causes a crash on 2 socket system with the config that uses
> lcores only from the first socket.
>
[Lukasz] I will fix it in V3. Thanks
>> + inline_sessions_free(socket_ctx[socket_id].sa_out);
>> + }
>> +
>> + for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
>> + printf("Closing cryptodev %d...", cdev_id);
>> + rte_cryptodev_stop(cdev_id);
>> + rte_cryptodev_close(cdev_id);
>> + printf(" Done\n");
>> + }
>> +
>> + RTE_ETH_FOREACH_DEV(portid) {
>> + if ((enabled_port_mask & (1 << portid)) == 0)
>> + continue;
>> +
>> + printf("Closing port %d...", portid);
>> + if (flow_info_tbl[portid].rx_def_flow) {
>> + struct rte_flow_error err;
>> +
>> + ret = rte_flow_destroy(portid,
>> + flow_info_tbl[portid].rx_def_flow, &err);
>> + if (ret)
>> + RTE_LOG(ERR, IPSEC, "Failed to destroy flow "
>> + " for port %u, err msg: %s\n", portid,
>> + err.message);
>> + }
>> + rte_eth_dev_stop(portid);
>> + rte_eth_dev_close(portid);
>> + printf(" Done\n");
>> + }
>> + printf("Bye...\n");
>> +
>> return 0;
>> }
>> diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
>> index 28ff07d..0539aec 100644
>> --- a/examples/ipsec-secgw/ipsec.h
>> +++ b/examples/ipsec-secgw/ipsec.h
>> @@ -153,6 +153,17 @@ struct ipsec_sa {
>> struct rte_security_session_conf sess_conf;
>> } __rte_cache_aligned;
>>
>> +struct sa_ctx {
>> + void *satbl; /* pointer to array of rte_ipsec_sa objects*/
>> + struct ipsec_sa sa[IPSEC_SA_MAX_ENTRIES];
>> + union {
>> + struct {
>> + struct rte_crypto_sym_xform a;
>> + struct rte_crypto_sym_xform b;
>> + };
>> + } xf[IPSEC_SA_MAX_ENTRIES];
>> +};
>> +
>> struct ipsec_mbuf_metadata {
>> struct ipsec_sa *sa;
>> struct rte_crypto_op cop;
>> diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
>> index c75a5a1..2ec3e17 100644
>> --- a/examples/ipsec-secgw/sa.c
>> +++ b/examples/ipsec-secgw/sa.c
>> @@ -781,17 +781,6 @@ print_one_sa_rule(const struct ipsec_sa *sa, int inbound)
>> printf("\n");
>> }
>>
>> -struct sa_ctx {
>> - void *satbl; /* pointer to array of rte_ipsec_sa objects*/
>> - struct ipsec_sa sa[IPSEC_SA_MAX_ENTRIES];
>> - union {
>> - struct {
>> - struct rte_crypto_sym_xform a;
>> - struct rte_crypto_sym_xform b;
>> - };
>> - } xf[IPSEC_SA_MAX_ENTRIES];
>> -};
>> -
>> static struct sa_ctx *
>> sa_create(const char *name, int32_t socket_id)
>> {
>> --
>> 2.7.4
>
More information about the dev
mailing list