[dpdk-dev] [PATCH 09/27] event/dlb: add inline functions used in multiple files

[McDaniel, Timothy]

>-----Original Message-----
>From: Bruce Richardson <bruce.richardson at intel.com>
>Sent: Tuesday, July 7, 2020 7:03 AM
>To: McDaniel, Timothy <timothy.mcdaniel at intel.com>
>Cc: jerinj at marvell.com; mattias.ronnblom at ericsson.com; dev at dpdk.org; Eads,
>Gage <gage.eads at intel.com>; Van Haaren, Harry <harry.van.haaren at intel.com>
>Subject: Re: [dpdk-dev] [PATCH 09/27] event/dlb: add inline functions used in
>multiple files
>
>On Fri, Jun 26, 2020 at 11:37:33PM -0500, Tim McDaniel wrote:
>> From: "McDaniel, Timothy" <timothy.mcdaniel at intel.com>
>>
>> Signed-off-by: McDaniel, Timothy <timothy.mcdaniel at intel.com>
>> ---
>>  drivers/event/dlb/dlb_inline_fns.h |   80
>++++++++++++++++++++++++++++++++++++
>>  1 file changed, 80 insertions(+)
>>  create mode 100644 drivers/event/dlb/dlb_inline_fns.h
>>
>> diff --git a/drivers/event/dlb/dlb_inline_fns.h
>b/drivers/event/dlb/dlb_inline_fns.h
>> new file mode 100644
>> index 0000000..86f85aa
>> --- /dev/null
>> +++ b/drivers/event/dlb/dlb_inline_fns.h
>> @@ -0,0 +1,80 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright(c) 2016-2020 Intel Corporation
>> + */
>> +
>> +#include "rte_memcpy.h"
>> +#include "rte_io.h"
>> +
>> +/* Inline functions required in more than one source file.
>> + */
>> +
>> +static inline struct dlb_eventdev *
>> +dlb_pmd_priv(const struct rte_eventdev *eventdev)
>> +{
>> +	return eventdev->data->dev_private;
>> +}
>> +
>> +static inline void
>> +dlb_umonitor(volatile void *addr)
>> +{
>> +	asm volatile(".byte 0xf3, 0x0f, 0xae, 0xf7\t\n"
>> +			:
>> +			: "D" (addr));
>> +}
>> +
>> +static inline void
>> +dlb_umwait(int state, uint64_t timeout)
>> +{
>> +	uint32_t eax = timeout & UINT32_MAX;
>> +	uint32_t edx = timeout >> 32;
>> +
>> +	asm volatile(".byte 0xf2, 0x0f, 0xae, 0xf7\t\n"
>> +			:
>> +			: "D" (state),  "a" (eax), "d" (edx));
>> +}
>> +
>> +static inline void
>> +dlb_movntdq(void *qe4, void *pp_addr)
>> +{
>> +	/* Move entire 64B cache line of QEs, 128 bits (16B) at a time. */
>> +	long long *_qe  = (long long *)qe4;
>> +	__v2di src_data0 = (__v2di){_qe[0], _qe[1]};
>> +	__v2di src_data1 = (__v2di){_qe[2], _qe[3]};
>> +	__v2di src_data2 = (__v2di){_qe[4], _qe[5]};
>> +	__v2di src_data3 = (__v2di){_qe[6], _qe[7]};
>> +
>> +	__builtin_ia32_movntdq((__v2di *)pp_addr + 0, (__v2di)src_data0);
>> +	rte_wmb();
>> +	__builtin_ia32_movntdq((__v2di *)pp_addr + 1, (__v2di)src_data1);
>> +	rte_wmb();
>> +	__builtin_ia32_movntdq((__v2di *)pp_addr + 2, (__v2di)src_data2);
>> +	rte_wmb();
>> +	__builtin_ia32_movntdq((__v2di *)pp_addr + 3, (__v2di)src_data3);
>> +	rte_wmb();
>> +}
>> +
>> +static inline void
>> +dlb_movntdq_single(void *qe4, void *pp_addr)
>> +{
>> +	long long *_qe  = (long long *)qe4;
>> +	__v2di src_data0 = (__v2di){_qe[0], _qe[1]};
>> +
>> +	__builtin_ia32_movntdq((__v2di *)pp_addr, (__v2di)src_data0);
>> +}
>> +
>> +static inline void
>> +dlb_cldemote(void *addr)
>> +{
>> +	/* Load addr into RSI, then demote the cache line of the address
>> +	 * contained in that register.
>> +	 */
>> +	asm volatile(".byte 0x0f, 0x1c, 0x06" :: "S" (addr));
>> +}
>> +
>> +static inline void
>> +dlb_movdir64b(void *qe4, void *pp_addr)
>> +{
>> +	asm volatile(".byte 0x66, 0x0f, 0x38, 0xf8, 0x02"
>> +		     :
>> +		     : "a" (pp_addr), "d" (qe4));
>> +}
>> --
>
>Although these are mostly x86-specific, a number of these functions may be
>needed in other places in DPDK also, so they should perhaps be put in a
>common location.
>
>Also, for the use of these, can you try and align the parameter names and
>order as far as possible with those of the equivalent x86 intrinsics
>documented at
>https://software.intel.com/sites/landingpage/IntrinsicsGuide/. This will
>make it easier in the future to switch to use the proper intrinsics rather
>than our own versions. For example, _movdir64b intrinsic has parameters
>"void *dst, const void *src", which is reversed to what you have here.
>
>Thanks,
>/Bruce

Thanks for the suggestions, Bruce. I will make those changes.