[dpdk-dev] [PATCH v2 6/6] examples/flow_filtering: utilize shared RSS action
Andrey Vesnovaty
andreyv at mellanox.com
Thu Jul 9 14:25:23 CEST 2020
Hi, Jerin and Ferruh
First of all it's decided to postpone this effort to 20.11.
@jerinj at marvell.com I sincerely believe we can work out great API for
- shared action, context
- action update / modification / replacement
after 20.08 without time pressure & stress.
I'm fully committed and will continue to work on this PATCH.
I'll resend improved version of this patch once 20.08 is out & we will
continue our discussion from here to make it even better.
Many thanks to all participants of this discussion,
Andrey
-----Original Message-----
From: Ori Kam <orika at mellanox.com>
Sent: Thursday, July 9, 2020 9:09 AM
To: Jerin Jacob <jerinjacobk at gmail.com>; Andrey Vesnovaty <andreyv at mellanox.com>
Cc: dpdk-dev <dev at dpdk.org>; jer at marvell.com; Thomas Monjalon <thomas at monjalon.net>; Ferruh Yigit <ferruh.yigit at intel.com>; Stephen Hemminger <stephen at networkplumber.org>; Richardson, Bruce <bruce.richardson at intel.com>; Slava Ovsiienko <viacheslavo at mellanox.com>; Andrey Vesnovaty <andrey.vesnovaty at gmail.com>; Marko Kovacevic <marko.kovacevic at intel.com>; Radu Nicolau <radu.nicolau at intel.com>; Akhil Goyal <akhil.goyal at nxp.com>; Tomasz Kantecki <tomasz.kantecki at intel.com>; Sunil Kumar Kori <skori at marvell.com>; Pavan Nikhilesh <pbhagavatula at marvell.com>; John McNamara <john.mcnamara at intel.com>
Subject: RE: [PATCH v2 6/6] examples/flow_filtering: utilize shared RSS action
Hi Andrey,
> -----Original Message-----
> From: Jerin Jacob <jerinjacobk at gmail.com>
> Sent: Thursday, July 9, 2020 7:44 AM
> To: Andrey Vesnovaty <andreyv at mellanox.com>
> Cc: dpdk-dev <dev at dpdk.org>; jer at marvell.com; Thomas Monjalon
> <thomas at monjalon.net>; Ferruh Yigit <ferruh.yigit at intel.com>; Stephen
> Hemminger <stephen at networkplumber.org>; Richardson, Bruce
> <bruce.richardson at intel.com>; Ori Kam <orika at mellanox.com>; Slava
> Ovsiienko <viacheslavo at mellanox.com>; Andrey Vesnovaty
> <andrey.vesnovaty at gmail.com>; Marko Kovacevic
> <marko.kovacevic at intel.com>; Radu Nicolau <radu.nicolau at intel.com>; Akhil
> Goyal <akhil.goyal at nxp.com>; Tomasz Kantecki <tomasz.kantecki at intel.com>;
> Sunil Kumar Kori <skori at marvell.com>; Pavan Nikhilesh
> <pbhagavatula at marvell.com>; John McNamara <john.mcnamara at intel.com>
> Subject: Re: [PATCH v2 6/6] examples/flow_filtering: utilize shared RSS action
>
> On Thu, Jul 9, 2020 at 3:09 AM Andrey Vesnovaty <andreyv at mellanox.com>
> wrote:
> >
> > This commit gives very first shared RSS action usage example and
> > demonstrates shared action capability for in-place update.
> >
> > First application creates shared action during initialization phase.
>
> What if PMD does not support a shared context, Then this application
> fails to run?
> if so, have a mode or probe the capability(if capability present then
> switches to new mode else fall back to old mode) before changing the
> application behavior.
>
+1 the new action should be added as a new case and should run only if it is
the shared action is supported.
>
> > Later on the flow object created by application uses previously created
> > shared RSS action with 1 queue configured instead of queue action in
> > original application.
> >
> > On each RX queue burst shared RSS action reconfigured via
> > rte_flow_shared_action_update() API to switch queue 0 to 1 & 1 to 0.
> > User supposed to observe consistent queue switches on each packet burst.
> >
> > Signed-off-by: Andrey Vesnovaty <andreyv at mellanox.com>
> > ---
> > doc/guides/sample_app_ug/flow_filtering.rst | 62 +++++++++++++++++----
> > examples/flow_filtering/flow_blocks.c | 30 +++++-----
> > examples/flow_filtering/main.c | 41 +++++++++++++-
> > 3 files changed, 105 insertions(+), 28 deletions(-)
> >
> > diff --git a/doc/guides/sample_app_ug/flow_filtering.rst
> b/doc/guides/sample_app_ug/flow_filtering.rst
> > index 5e5a6cd8a0..cfe9334717 100644
> > --- a/doc/guides/sample_app_ug/flow_filtering.rst
> > +++ b/doc/guides/sample_app_ug/flow_filtering.rst
> > @@ -106,7 +106,7 @@ following code:
> > .. code-block:: c
> >
> > /* create flow for send packet with */
> > - flow = generate_ipv4_flow(port_id, selected_queue,
> > + flow = generate_ipv4_flow(port_id, shared_action,
> > SRC_IP, EMPTY_MASK,
> > DEST_IP, FULL_MASK, &error);
> > if (!flow) {
> > @@ -242,7 +242,7 @@ The Ethernet port is configured with default settings
> using the
> > rxq_conf = dev_info.default_rxconf;
> > rxq_conf.offloads = port_conf.rxmode.offloads;
> >
> > -For this example we are configuring number of rx and tx queues that are
> connected
> > +For this example we are configuring 2 rx and 2 tx queues that are connected
> > to a single port.
> >
> > .. code-block:: c
> > @@ -270,13 +270,22 @@ to a single port.
> > }
> > }
> >
> > +Before we create the flow we create shared action in order to send it as
> > +actions argument when creating a flow. The action is single queue RSS
> action
> > +similar to action queue with the only difference that shared RSS action
> > +provides update capability after action creation.
> > +
> > +.. code-block:: c
> > +
> > + shared_action = rte_flow_shared_action_create(port_id, &action, &error);
> > +
> > In the next step we create and apply the flow rule. which is to send packets
> > with destination ip equals to 192.168.1.1 to queue number 1. The detail
> > explanation of the ``generate_ipv4_flow()`` appears later in this document:
> >
> > .. code-block:: c
> >
> > - flow = generate_ipv4_flow(port_id, selected_queue,
> > + flow = generate_ipv4_flow(port_id, shared_action,
> > SRC_IP, EMPTY_MASK,
> > DEST_IP, FULL_MASK, &error);
> >
> > @@ -339,6 +348,21 @@ looks like the following:
> > printf("\n");
> > rte_pktmbuf_free(m);
> > }
> > + if (rss_queue[0] == 0) {
> > + printf(">>> switching queue 0 -> 1\n");
> > + rss_queue[0] = 1;
> > + } else {
> > + printf(">>> switching queue 1 -> 0\n");
> > + rss_queue[0] = 0;
> > + }
> > + ret = rte_flow_shared_action_update
> > + (port_id, shared_action, &action,
> > + &error);
> > + if (ret)
> > + rte_exit(EXIT_FAILURE,
> > + ":: error: RSS action update "
> > + "failed: %s\n",
> > + rte_strerror(-ret));
> > }
> > }
> > }
> > @@ -348,6 +372,8 @@ looks like the following:
> > rte_eth_dev_close(port_id);
> > }
> >
> > +On each loop eteration Rx queue switched using
> > +``rte_flow_shared_action_update()`` API.
> > The main work of the application is reading the packets from all
> > queues and printing for each packet the destination queue:
> >
> > @@ -365,6 +391,21 @@ queues and printing for each packet the destination
> queue:
> > printf(" - queue=0x%x", (unsigned int)i);
> > printf("\n");
> > rte_pktmbuf_free(m);
> > + if (rss_queue[0] == 0) {
> > + printf(">>> switching queue 0 -> 1\n");
> > + rss_queue[0] = 1;
> > + } else {
> > + printf(">>> switching queue 1 -> 0\n");
> > + rss_queue[0] = 0;
> > + }
> > + ret = rte_flow_shared_action_update
> > + (port_id, shared_action, &action,
> > + &error);
> > + if (ret)
> > + rte_exit(EXIT_FAILURE,
> > + ":: error: RSS action update "
> > + "failed: %s\n",
> > + rte_strerror(-ret));
> > }
> > }
> > }
> > @@ -378,13 +419,15 @@ The forwarding loop can be interrupted and the
> application closed using
> > The generate_ipv4_flow function
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > +
> > The generate_ipv4_flow function is responsible for creating the flow rule.
> > This function is located in the ``flow_blocks.c`` file.
> >
> > .. code-block:: c
> >
> > static struct rte_flow *
> > - generate_ipv4_flow(uint8_t port_id, uint16_t rx_q,
> > + generate_ipv4_flow(uint8_t port_id,
> > + cstructrte_flow_shared_action *shared_action,
> > uint32_t src_ip, uint32_t src_mask,
> > uint32_t dest_ip, uint32_t dest_mask,
> > struct rte_flow_error *error)
> > @@ -393,7 +436,6 @@ This function is located in the ``flow_blocks.c`` file.
> > struct rte_flow_item pattern[MAX_PATTERN_NUM];
> > struct rte_flow_action action[MAX_ACTION_NUM];
> > struct rte_flow *flow = NULL;
> > - struct rte_flow_action_queue queue = { .index = rx_q };
> > struct rte_flow_item_ipv4 ip_spec;
> > struct rte_flow_item_ipv4 ip_mask;
> >
> > @@ -411,8 +453,8 @@ This function is located in the ``flow_blocks.c`` file.
> > * create the action sequence.
> > * one action only, move packet to queue
> > */
> > - action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
> > - action[0].conf = &queue;
> > + action[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
> > + action[0].conf = shared_action;
> > action[1].type = RTE_FLOW_ACTION_TYPE_END;
> >
> > /*
> > @@ -468,12 +510,12 @@ The following part create the flow attributes, in
> our case ingress.
> > attr.ingress = 1;
> >
> > The third part defines the action to be taken when a packet matches
> > -the rule. In this case send the packet to queue.
> > +the rule. In this case send the packet to single RSS queue.
> >
> > .. code-block:: c
> >
> > - action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
> > - action[0].conf = &queue;
> > + action[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
> > + action[0].conf = shared_action;
> > action[1].type = RTE_FLOW_ACTION_TYPE_END;
> >
> > The fourth part is responsible for creating the pattern and is built from
> > diff --git a/examples/flow_filtering/flow_blocks.c
> b/examples/flow_filtering/flow_blocks.c
> > index 575d792810..99bfed3172 100644
> > --- a/examples/flow_filtering/flow_blocks.c
> > +++ b/examples/flow_filtering/flow_blocks.c
> > @@ -6,11 +6,11 @@
> > #define MAX_ACTION_NUM 2
> >
> > struct rte_flow *
> > -generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> > - uint32_t src_ip, uint32_t src_mask,
> > - uint32_t dest_ip, uint32_t dest_mask,
> > - struct rte_flow_error *error);
> > -
> > +generate_ipv4_flow(uint16_t port_id,
> > + struct rte_flow_shared_action *shared_action,
> > + uint32_t src_ip, uint32_t src_mask,
> > + uint32_t dest_ip, uint32_t dest_mask,
> > + struct rte_flow_error *error);
> >
> > /**
> > * create a flow rule that sends packets with matching src and dest ip
> > @@ -18,8 +18,8 @@ generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> > *
> > * @param port_id
> > * The selected port.
> > - * @param rx_q
> > - * The selected target queue.
> > + * @param shared_action
> > + * The shared RSS action with single queue
> > * @param src_ip
> > * The src ip value to match the input packet.
> > * @param src_mask
> > @@ -35,16 +35,16 @@ generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> > * A flow if the rule could be created else return NULL.
> > */
> > struct rte_flow *
> > -generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> > - uint32_t src_ip, uint32_t src_mask,
> > - uint32_t dest_ip, uint32_t dest_mask,
> > - struct rte_flow_error *error)
> > +generate_ipv4_flow(uint16_t port_id,
> > + struct rte_flow_shared_action *shared_action,
> > + uint32_t src_ip, uint32_t src_mask,
> > + uint32_t dest_ip, uint32_t dest_mask,
> > + struct rte_flow_error *error)
> > {
> > struct rte_flow_attr attr;
> > struct rte_flow_item pattern[MAX_PATTERN_NUM];
> > struct rte_flow_action action[MAX_ACTION_NUM];
> > struct rte_flow *flow = NULL;
> > - struct rte_flow_action_queue queue = { .index = rx_q };
> > struct rte_flow_item_ipv4 ip_spec;
> > struct rte_flow_item_ipv4 ip_mask;
> > int res;
> > @@ -61,10 +61,10 @@ generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> >
> > /*
> > * create the action sequence.
> > - * one action only, move packet to queue
> > + * one action only, move packet to shared RSS queue
> > */
> > - action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
> > - action[0].conf = &queue;
> > + action[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
> > + action[0].conf = shared_action;
> > action[1].type = RTE_FLOW_ACTION_TYPE_END;
> >
> > /*
> > diff --git a/examples/flow_filtering/main.c b/examples/flow_filtering/main.c
> > index cc9e7e7808..d6b18d95fc 100644
> > --- a/examples/flow_filtering/main.c
> > +++ b/examples/flow_filtering/main.c
> > @@ -32,8 +32,7 @@
> > static volatile bool force_quit;
> >
> > static uint16_t port_id;
> > -static uint16_t nr_queues = 5;
> > -static uint8_t selected_queue = 1;
> > +static uint16_t nr_queues = 2;
> > struct rte_mempool *mbuf_pool;
> > struct rte_flow *flow;
> >
> > @@ -42,6 +41,24 @@ struct rte_flow *flow;
> > #define FULL_MASK 0xffffffff /* full mask */
> > #define EMPTY_MASK 0x0 /* empty mask */
> >
> > +struct rte_flow_shared_action *shared_action;
> > +uint16_t rss_queue[1] = {0};
> > +
> > +struct rte_flow_action_rss action_rss = {
> > + .func = RTE_ETH_HASH_FUNCTION_DEFAULT,
> > + .level = 0,
> > + .types = 0,
> > + .key_len = 0,
> > + .key = NULL,
> > + .queue = rss_queue,
> > + .queue_num = 1,
> > +};
> > +
> > +struct rte_flow_action action = {
> > + .type = RTE_FLOW_ACTION_TYPE_RSS,
> > + .conf = &action_rss,
> > +};
> > +
> > #include "flow_blocks.c"
> >
> > static inline void
> > @@ -61,6 +78,7 @@ main_loop(void)
> > uint16_t nb_rx;
> > uint16_t i;
> > uint16_t j;
> > + int ret;
> >
> > while (!force_quit) {
> > for (i = 0; i < nr_queues; i++) {
> > @@ -82,6 +100,21 @@ main_loop(void)
> >
> > rte_pktmbuf_free(m);
> > }
> > + if (rss_queue[0] == 0) {
> > + printf(">>> switching queue 0 -> 1\n");
> > + rss_queue[0] = 1;
> > + } else {
> > + printf(">>> switching queue 1 -> 0\n");
> > + rss_queue[0] = 0;
> > + }
> > + ret = rte_flow_shared_action_update
> > + (port_id, shared_action, &action,
> > + &error);
> > + if (ret)
> > + rte_exit(EXIT_FAILURE,
> > + ":: error: RSS action update "
> > + "failed: %s\n",
> > + rte_strerror(-ret));
> > }
> > }
> > }
> > @@ -243,8 +276,10 @@ main(int argc, char **argv)
> >
> > init_port();
> >
> > + shared_action = rte_flow_shared_action_create(port_id, &action,
> &error);
> > +
> > /* create flow for send packet with */
> > - flow = generate_ipv4_flow(port_id, selected_queue,
> > + flow = generate_ipv4_flow(port_id, shared_action,
> > SRC_IP, EMPTY_MASK,
> > DEST_IP, FULL_MASK, &error);
> > if (!flow) {
> > --
> > 2.26.2
> >
More information about the dev
mailing list