[dpdk-dev] [dts] [PATCH] speed-capabilities: added Speed Capabilities test case

Tu, Lijuan lijuan.tu at intel.com
Mon Jul 20 09:12:29 CEST 2020


Applied, thanks

> -----Original Message-----
> From: dts <dts-bounces at dpdk.org> On Behalf Of dkirichok at iol.unh.edu
> Sent: 2020年7月7日 21:41
> To: dts at dpdk.org
> Cc: mb at smartsharesystems.com; lylavoie at iol.unh.edu; thomas at monjalon.net;
> dev at dpdk.org; david.marchand at redhat.com; Yigit, Ferruh
> <ferruh.yigit at intel.com>; arybchenko at solarflare.com; i.dyukov at samsung.com;
> rasland at mellanox.com; j.hendergart at f5.com; dliu at iol.unh.edu;
> ohilyard at iol.unh.edu; Daniel Kirichok <dkirichok at iol.unh.edu>
> Subject: [dts] [PATCH] speed-capabilities: added Speed Capabilities test case
> 
> From: Daniel Kirichok <dkirichok at iol.unh.edu>
> 
> Added test case for checking speed capabilities.
> 
> Signed-off-by: Daniel Kirichok <dkirichok at iol.unh.edu>
> ---
>  conf/speed_capabilities.cfg                 |   4 +
>  test_plans/speed_capabilities_test_plan.rst |  84 ++++++++++++++
>  tests/TestSuite_speed_capabilities.py       | 120 ++++++++++++++++++++
>  3 files changed, 208 insertions(+)
>  create mode 100644 conf/speed_capabilities.cfg  create mode 100644
> test_plans/speed_capabilities_test_plan.rst
>  create mode 100644 tests/TestSuite_speed_capabilities.py
> 
> diff --git a/conf/speed_capabilities.cfg b/conf/speed_capabilities.cfg new file
> mode 100644 index 0000000..c22f531
> --- /dev/null
> +++ b/conf/speed_capabilities.cfg
> @@ -0,0 +1,4 @@
> +[suite]
> +# The format for entering expected speeds is {'<INTERFACE>':'<EXPECTED
> +SPEED>',...} # Unit for speed must be in G or M
> +expected_speeds={'interface1': '10G', 'interface2': '100M'}
> diff --git a/test_plans/speed_capabilities_test_plan.rst
> b/test_plans/speed_capabilities_test_plan.rst
> new file mode 100644
> index 0000000..2821612
> --- /dev/null
> +++ b/test_plans/speed_capabilities_test_plan.rst
> @@ -0,0 +1,84 @@
> +.. # BSD LICENSE
> +    #
> +    # Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +    # Copyright © 2018[, 2019] The University of New Hampshire. All rights
> reserved.
> +    # All rights reserved.
> +    #
> +    # Redistribution and use in source and binary forms, with or without
> +    # modification, are permitted provided that the following conditions
> +    # are met:
> +    #
> +    #   * Redistributions of source code must retain the above copyright
> +    #     notice, this list of conditions and the following disclaimer.
> +    #   * Redistributions in binary form must reproduce the above copyright
> +    #     notice, this list of conditions and the following disclaimer in
> +    #     the documentation and/or other materials provided with the
> +    #     distribution.
> +    #   * Neither the name of Intel Corporation nor the names of its
> +    #     contributors may be used to endorse or promote products derived
> +    #     from this software without specific prior written permission.
> +    #
> +    # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +    # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +    # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> +    # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> +    # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> +    # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> +    # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> +    # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY
> +    # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> +    # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> +    # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +=======================
> +Speed Capabilities Test
> +=======================
> +
> +The Speed Capabilities Test checks the speeds that the device lists and
> +compares it to a user-defined set of expected speeds set in the
> ``speed_capabilities.cfg``.
> +
> +Prerequisites
> +=============
> +
> +If using vfio the kernel must be >= 3.6+ and VT-d must be enabled in
> +bios.When using vfio, use the following commands to load the vfio
> +driver and bind it to the device under test::
> +
> +   modprobe vfio
> +   modprobe vfio-pci
> +   usertools/dpdk-devbind.py --bind=vfio-pci device_bus_id
> +
> +Assuming that ports ``0`` and ``1`` of the test target are directly
> +connected to the traffic generator, launch the ``testpmd`` application
> +with the following
> +arguments::
> +
> +  ./build/app/testpmd -- -i --portmask=0x3
> +
> +Start packet forwarding in the ``testpmd`` application with the
> +``start`` command. Then, for each port on the target make the Traffic
> +Generator transmit a packet to the port of arbitrary size less than the
> +MTU of the target port, checking that the same amount of frames and
> +bytes are received back by the Traffic Generator from the port.
> +
> +Ensure that the ``speed_capabilities.cfg`` file correctly reflects the
> +speeds the device is expected to run at.
> +
> +
> +Test Case : Speed Capabilities Test
> +===================================
> +
> +1. Use testpmd to retrieve the speed information that the interface is linked at::
> +
> +      testpmd> show port info <PORT_ID>
> +
> +2. Compares the speed value against the rate in the speed_capabilities.cfg file.
> +   The supported options for expected speeds are 1G, 10G, 25G, 40G, and 100G.
> Each interface must have an expected speed associated with it.
> +   Example file below::
> +
> +      [suite]
> +      expected_speeds={'interface1': '10G', 'interface2': '100M'}
> +
> +
> +3. Verifies that the speeds matches accordingly.
> +
> +4. Repeats the verification for each NIC and interface found on the system.
> diff --git a/tests/TestSuite_speed_capabilities.py
> b/tests/TestSuite_speed_capabilities.py
> new file mode 100644
> index 0000000..25c45e4
> --- /dev/null
> +++ b/tests/TestSuite_speed_capabilities.py
> @@ -0,0 +1,120 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# Copyright © 2018[, 2019] The University of New Hampshire. All rights
> reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +#   * Redistributions of source code must retain the above copyright
> +#     notice, this list of conditions and the following disclaimer.
> +#   * Redistributions in binary form must reproduce the above copyright
> +#     notice, this list of conditions and the following disclaimer in
> +#     the documentation and/or other materials provided with the
> +#     distribution.
> +#   * Neither the name of Intel Corporation nor the names of its
> +#     contributors may be used to endorse or promote products derived
> +#     from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +"""
> +import utils
> +from pmd_output import PmdOutput
> +from test_case import TestCase
> +
> +
> +class TestSpeedCapabilities(TestCase):
> +    def set_up_all(self):
> +        """
> +        Run at the start of each test suite.
> +        """
> +        self.ports = self.dut.get_ports()
> +        self.ports_socket = self.dut.get_numa_id(self.ports[0])
> +
> +        for port in self.ports:
> +            self.tester.send_expect(f"ifconfig
> {self.tester.get_interface(self.tester.get_local_port(port))} mtu 5000"
> +                                    , "# ")
> +
> +        self.pmdout = PmdOutput(self.dut)
> +        self.vm_env_done = False
> +
> +    def test_speed_capabilities(self):
> +        self.pmdout.start_testpmd("Default")
> +
> +        cfg_content = self.get_suite_cfg()
> +        expected_speeds = cfg_content.get('expected_speeds')
> +
> +        detected_interfaces = []
> +
> +        for port in self.ports:
> +            interface_name =
> + self.tester.get_interface(self.tester.get_local_port(port))
> +
> +            # Gives the speed in Mb/s
> +            interface_speed = self.pmdout.get_port_link_speed(port)
> +
> +            self.verify(interface_name in expected_speeds, f"The interface
> {interface_name} does not have an expected "
> +                                                           f"speed
> + associated with it.")
> +
> +            detected_interfaces.append(interface_name)
> +
> +            expected_speed = expected_speeds[interface_name]
> +
> +            # Isolates the unit (Either M or G)
> +            expected_speed_unit = ''.join(i for i in expected_speed if
> + not i.isdigit())
> +
> +            # Removes the unit from the speed
> +            expected_speed = ''.join(i for i in expected_speed if
> + i.isdigit())
> +
> +            self.verify(len(interface_speed) > 0,
> +                        f"A valid speed could not be read for the
> + interface {interface_name}.")
> +
> +            # Converts Gb/s to Mb/s for consistent comparison
> +            if expected_speed_unit == "G":
> +                expected_speed += "000"
> +
> +            self.verify(interface_speed == expected_speed,
> +                        f"Detected speed: {interface_speed} Mb/s for the interface
> {interface_name}, "
> +                        f"but expected speed: {expected_speed} Mb/s")
> +
> +        for key, value in expected_speeds.items():
> +            self.verify(key in detected_interfaces, f"The interface {key} expected the
> speed {value} in "
> +
> + "speed_capabilities.cfg file, but it did not detect that interface.")
> +
> +    def tear_down(self):
> +        """
> +        Run after each test case.
> +        """
> +        self.dut.kill_all()
> +        self.pmdout.start_testpmd("Default", "--portmask=%s --port-
> topology=loop" % utils.create_mask(self.ports),
> +                                  socket=self.ports_socket)
> +        ports_num = len(self.ports)
> +        # link up test, to avoid failing further tests if link was down
> +        for i in range(ports_num):
> +            # sometimes output text messing up testpmd prompt so trimmed prompt
> +            self.dut.send_expect("set link-up port %d" % i, ">")
> +        # start ports, to avoid failing further tests if ports are stopped
> +        self.dut.send_expect("port start all", "testpmd> ", 100)
> +        self.dut.send_expect("quit", "# ")
> +
> +    def tear_down_all(self):
> +        """
> +        Run after each test suite.
> +        """
> +        if self.vm_env_done:
> +            self.destroy_vm_env()
> +        self.dut.kill_all()
> --
> 2.17.1



More information about the dev mailing list