[dpdk-dev] [PATCH 3/5] app/testpmd: re-implement commands by using private API

[Jeff Guo]

hi, chenxu

On 6/17/2020 6:12 PM, Di, ChenxuX wrote:
>
>> -----Original Message-----
>> From: Kevin Traynor [mailto:ktraynor at redhat.com]
>> Sent: Wednesday, June 17, 2020 4:12 AM
>> To: Di, ChenxuX <chenxux.di at intel.com>; dev at dpdk.org
>> Cc: Xing, Beilei <beilei.xing at intel.com>; Yang, Qiming <qiming.yang at intel.com>
>> Subject: Re: [dpdk-dev] [PATCH 3/5] app/testpmd: re-implement commands by
>> using private API
>>
>> On 11/06/2020 07:01, Chenxu Di wrote:
>>> The legacy filter API will be superseded. This patch use private api
>>> to change the implementation of commands global_config <port_id>
>>> gre-key-len <key_len> and show port fdir <port_id>
>>>
>>> Signed-off-by: Chenxu Di <chenxux.di at intel.com>
>>> ---
>>>   app/test-pmd/cmdline.c | 23 ++++++++-----  app/test-pmd/config.c  |
>>> 74 +++++++++++++++++++++++++++++++++++-------
>>>   2 files changed, 78 insertions(+), 19 deletions(-)
>>>
>>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
>>> 996a49876..01d793e89 100644
>>> --- a/app/test-pmd/cmdline.c
>>> +++ b/app/test-pmd/cmdline.c
>>> @@ -9280,15 +9280,22 @@ cmd_global_config_parsed(void *parsed_result,
>>> {
>>>   	struct cmd_global_config_result *res = parsed_result;
>>>   	struct rte_eth_global_cfg conf;
>>> -	int ret;
>>> +	int ret = -ENOTSUP;
>>>
>>> -	memset(&conf, 0, sizeof(conf));
>>> -	conf.cfg_type = RTE_ETH_GLOBAL_CFG_TYPE_GRE_KEY_LEN;
>>> -	conf.cfg.gre_key_len = res->len;
>>> -	ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_NONE,
>>> -				      RTE_ETH_FILTER_SET, &conf);
>>> -	if (ret != 0)
>>> -		printf("Global config error\n");
>>> +#ifdef RTE_LIBRTE_I40E_PMD
>>> +	if (ret == -ENOTSUP)


you init ret to be default value and then check if ret to be default 
value, it that need?


>>> +		ret = rte_pmd_i40e_set_gre_key_len(res->port_id, res->len);
>> #endif
>>> +	if (ret == -ENOTSUP) {
>>> +		memset(&conf, 0, sizeof(conf));
>>> +		conf.cfg_type = RTE_ETH_GLOBAL_CFG_TYPE_GRE_KEY_LEN;
>>> +		conf.cfg.gre_key_len = res->len;
>>> +		ret = rte_eth_dev_filter_ctrl(res->port_id,
>> RTE_ETH_FILTER_NONE,
>>> +					      RTE_ETH_FILTER_SET, &conf);
>>> +	}
>>> +
>>> +	if (ret < 0)
>>> +		printf("Global config error: (%s)\n", strerror(-ret));
>>>   }
>>>
>>>   cmdline_parse_token_string_t cmd_global_config_cmd = diff --git
>>> a/app/test-pmd/config.c b/app/test-pmd/config.c index
>>> 016bcb09c..f519246c7 100644
>>> --- a/app/test-pmd/config.c
>>> +++ b/app/test-pmd/config.c
>>> @@ -3729,30 +3729,82 @@ print_fdir_flow_type(uint32_t flow_types_mask)
>>>   	printf("\n");
>>>   }
>>>
>>> +static int
>>> +get_fdir_info(portid_t port_id, struct rte_eth_fdir_info *fdir_info)
>>> +{
>>> +	int ret;
>> this looks like it won't compile if the RTE_LIBRTE_I40E_PMD is undefined, you'll
>> need to initialize ret
>>
> Yes, got it, I will fix it in next version patch.
>
>>> +#ifdef RTE_LIBRTE_I40E_PMD
>>> +	ret = rte_pmd_i40e_get_fdir_info(port_id, fdir_info); #endif #ifdef
>>> +RTE_LIBRTE_IXGBE_PMD
>>> +	if (ret == -ENOTSUP)


Suggest not init ret to be -ENOTSUP, so this checking of if (ret == 
-ENOTSUP) is no need.


>>> +		ret = rte_pmd_ixgbe_get_fdir_info(port_id, fdir_info); #endif
>>> +	if (ret == -ENOTSUP) {
>>> +		ret = rte_eth_dev_filter_supported(port_id,
>>> +						   RTE_ETH_FILTER_FDIR);
>>> +		if (ret < 0) {
>>> +			printf("\n FDIR is not supported on port %-2d\n",
>>> +				port_id);
>>> +			return ret;
>>> +		}
>>> +		rte_eth_dev_filter_ctrl(port_id, RTE_ETH_FILTER_FDIR,
>>> +					RTE_ETH_FILTER_INFO, fdir_info);
>>> +	}
>>> +
>>> +	if (ret < 0)
>>> +		printf("Get fdir infos error: (%s)\n", strerror(-ret));
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static int
>>> +get_fdir_stat(portid_t port_id, struct rte_eth_fdir_stats *fdir_stat)
>>> +{
>>> +	int ret;
>> Same comment as above
>>
> OK
>
>>> +#ifdef RTE_LIBRTE_I40E_PMD
>>> +	ret = rte_pmd_i40e_get_fdir_stats(port_id, fdir_stat); #endif #ifdef
>>> +RTE_LIBRTE_IXGBE_PMD
>>> +	if (ret == -ENOTSUP)
>>> +		ret = rte_pmd_ixgbe_get_fdir_stats(port_id, fdir_stat); #endif
>>> +	if (ret == -ENOTSUP) {
>>> +		ret = rte_eth_dev_filter_supported(port_id,
>>> +						   RTE_ETH_FILTER_FDIR);
>>> +		if (ret < 0) {
>>> +			printf("\n FDIR is not supported on port %-2d\n",
>>> +				port_id);
>>> +			return ret;
>>> +		}
>>> +		rte_eth_dev_filter_ctrl(port_id, RTE_ETH_FILTER_FDIR,
>>> +					RTE_ETH_FILTER_STATS, fdir_stat);
>>> +	}
>>> +
>>> +	if (ret < 0)


if (ret) should be enough.


>>> +		printf("Get fdir infos error: (%s)\n", strerror(-ret));
>>> +
>>> +	return ret;
>>> +}
>>> +
>>>   void
>>>   fdir_get_infos(portid_t port_id)
>>>   {
>>>   	struct rte_eth_fdir_stats fdir_stat;
>>>   	struct rte_eth_fdir_info fdir_info;
>>> -	int ret;
>>>
>>>   	static const char *fdir_stats_border = "########################";
>>>
>>>   	if (port_id_is_invalid(port_id, ENABLED_WARN))
>>>   		return;
>>> -	ret = rte_eth_dev_filter_supported(port_id, RTE_ETH_FILTER_FDIR);
>>> -	if (ret < 0) {
>>> -		printf("\n FDIR is not supported on port %-2d\n",
>>> -			port_id);
>>> -		return;
>>> -	}
>>>
>>>   	memset(&fdir_info, 0, sizeof(fdir_info));
>>> -	rte_eth_dev_filter_ctrl(port_id, RTE_ETH_FILTER_FDIR,
>>> -			       RTE_ETH_FILTER_INFO, &fdir_info);
>>> +	if (get_fdir_info(port_id, &fdir_info))
>>> +		return;


Suggest print error log out of the caller but not in the calling, it 
should be better.


>>>   	memset(&fdir_stat, 0, sizeof(fdir_stat));
>>> -	rte_eth_dev_filter_ctrl(port_id, RTE_ETH_FILTER_FDIR,
>>> -			       RTE_ETH_FILTER_STATS, &fdir_stat);
>>> +	if (get_fdir_stat(port_id, &fdir_stat))
>>> +		return;
>>> +
>>>   	printf("\n  %s FDIR infos for port %-2d     %s\n",
>>>   	       fdir_stats_border, port_id, fdir_stats_border);
>>>   	printf("  MODE: ");
>>>