[dpdk-dev] [PATCH] net/bnxt: allow configuring vector mode
Ajit Khaparde
ajit.khaparde at broadcom.com
Tue Mar 24 05:02:46 CET 2020
On Wed, Mar 4, 2020 at 10:45 PM Stephen Hemminger <
stephen at networkplumber.org> wrote:
> The bnxt driver has vector mode but it has limitations.
> For example, rte_flow mark won't work in vector mode.
> For this reason the user should be able to disable vector mode
> as part of the config.
>
> Make the configuration use the same as other drivers with
> vector mode: ixge, i40e, ...
>
> This will also make future support of vector mode on other
> architectures possible.
>
> Fixes: bc4a000f2f53 ("net/bnxt: implement SSE vector mode")
> Cc: lance.richardson at broadcom.com
> Cc: stable at dpdk.org
> Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
>
Patch applied to dpdk-next-net-brcm. Thanks
> ---
> config/common_base | 1 +
> drivers/net/bnxt/Makefile | 2 +-
> drivers/net/bnxt/bnxt_ethdev.c | 10 +++-------
> drivers/net/bnxt/bnxt_ring.c | 4 ++--
> drivers/net/bnxt/bnxt_rxr.c | 3 +++
> 5 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/config/common_base b/config/common_base
> index 7ca2f28b19c8..3c719c7cbfc3 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -219,6 +219,7 @@ CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
> # Compile burst-oriented Broadcom BNXT PMD driver
> #
> CONFIG_RTE_LIBRTE_BNXT_PMD=y
> +CONFIG_RTE_LIBRTE_BNXT_INC_VECTOR=y
>
> #
> # Compile burst-oriented Chelsio Terminator (CXGBE) PMD
> diff --git a/drivers/net/bnxt/Makefile b/drivers/net/bnxt/Makefile
> index b77532b8179b..85d6df6b5aa0 100644
> --- a/drivers/net/bnxt/Makefile
> +++ b/drivers/net/bnxt/Makefile
> @@ -40,7 +40,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_irq.c
> SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_util.c
> SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += rte_pmd_bnxt.c
> ifeq ($(CONFIG_RTE_ARCH_X86), y)
> -SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_rxtx_vec_sse.c
> +SRCS-$(CONFIG_RTE_LIBRTE_BNXT_INC_VECTOR) += bnxt_rxtx_vec_sse.c
> endif
>
> #
> diff --git a/drivers/net/bnxt/bnxt_ethdev.c
> b/drivers/net/bnxt/bnxt_ethdev.c
> index 18aa313fd8c1..701de33784b2 100644
> --- a/drivers/net/bnxt/bnxt_ethdev.c
> +++ b/drivers/net/bnxt/bnxt_ethdev.c
> @@ -757,8 +757,7 @@ bnxt_receive_function(struct rte_eth_dev *eth_dev)
> {
> struct bnxt *bp = eth_dev->data->dev_private;
>
> -#ifdef RTE_ARCH_X86
> -#ifndef RTE_LIBRTE_IEEE1588
> +#ifdef RTE_BNXT_INC_VECTOR
> /*
> * Vector mode receive can be enabled only if scatter rx is not
> * in use and rx offloads are limited to VLAN stripping and
> @@ -787,7 +786,6 @@ bnxt_receive_function(struct rte_eth_dev *eth_dev)
> eth_dev->data->port_id,
> eth_dev->data->scattered_rx,
> eth_dev->data->dev_conf.rxmode.offloads);
> -#endif
> #endif
> bp->flags &= ~BNXT_FLAG_RX_VECTOR_PKT_MODE;
> return bnxt_recv_pkts;
> @@ -796,8 +794,7 @@ bnxt_receive_function(struct rte_eth_dev *eth_dev)
> static eth_tx_burst_t
> bnxt_transmit_function(__rte_unused struct rte_eth_dev *eth_dev)
> {
> -#ifdef RTE_ARCH_X86
> -#ifndef RTE_LIBRTE_IEEE1588
> +#ifdef RTE_BNXT_INC_VECTOR
> /*
> * Vector mode transmit can be enabled only if not using scatter rx
> * or tx offloads.
> @@ -815,7 +812,6 @@ bnxt_transmit_function(__rte_unused struct rte_eth_dev
> *eth_dev)
> eth_dev->data->port_id,
> eth_dev->data->scattered_rx,
> eth_dev->data->dev_conf.txmode.offloads);
> -#endif
> #endif
> return bnxt_xmit_pkts;
> }
> @@ -2234,7 +2230,7 @@ int bnxt_mtu_set_op(struct rte_eth_dev *eth_dev,
> uint16_t new_mtu)
> new_pkt_size = new_mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN +
> VLAN_TAG_SIZE * BNXT_NUM_VLANS;
>
> -#ifdef RTE_ARCH_X86
> +#ifdef RTE_BNXT_INC_VECTOR
> /*
> * If vector-mode tx/rx is active, disallow any MTU change that
> would
> * require scattered receive support.
> diff --git a/drivers/net/bnxt/bnxt_ring.c b/drivers/net/bnxt/bnxt_ring.c
> index d6e4e8a28138..9a4a0f21418d 100644
> --- a/drivers/net/bnxt/bnxt_ring.c
> +++ b/drivers/net/bnxt/bnxt_ring.c
> @@ -608,7 +608,7 @@ int bnxt_alloc_hwrm_rx_ring(struct bnxt *bp, int
> queue_index)
> bnxt_db_write(&rxr->ag_db, rxr->ag_prod);
> }
> rxq->index = queue_index;
> -#ifdef RTE_ARCH_X86
> +#ifdef RTE_BNXT_INC_VECTOR
> bnxt_rxq_vec_setup(rxq);
> #endif
>
> @@ -713,7 +713,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
> bnxt_db_write(&rxr->rx_db, rxr->rx_prod);
> bnxt_db_write(&rxr->ag_db, rxr->ag_prod);
> rxq->index = i;
> -#ifdef RTE_ARCH_X86
> +#ifdef RTE_BNXT_INC_VECTOR
> bnxt_rxq_vec_setup(rxq);
> #endif
> }
> diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
> index bef9720f590c..f9087bea89b9 100644
> --- a/drivers/net/bnxt/bnxt_rxr.c
> +++ b/drivers/net/bnxt/bnxt_rxr.c
> @@ -18,6 +18,9 @@
> #include "hsi_struct_def_dpdk.h"
> #ifdef RTE_LIBRTE_IEEE1588
> #include "bnxt_hwrm.h"
> +#ifdef RTE_BNXT_INC_VECTOR
> +#error "bnxt: IEEE1588 is incompatiable with vector mode"
> +#endif
> #endif
>
> /*
> --
> 2.20.1
>
>
More information about the dev
mailing list