[dpdk-dev] [PATCH v8 5/5] net/virtio: Support of VIRTIO_NET_F_SPEED_DUPLEX

Ivan Dyukov i.dyukov at samsung.com
Mon Mar 30 09:58:02 CEST 2020


This patch adds a support of VIRTIO_NET_F_SPEED_DUPLEX feature
for virtio driver.

There are few ways to specify speed of the link:
   'speed' devarg
   negotiate speed from qemu via VIRTIO_NET_F_SPEED_DUPLEX
The highest priority is devarg. If devarg is not specified,
drivers tries to negotiate it from qemu.

Signed-off-by: Ivan Dyukov <i.dyukov at samsung.com>
---
 drivers/net/virtio/virtio_ethdev.c | 26 +++++++++++++++++++++++---
 drivers/net/virtio/virtio_ethdev.h |  3 ++-
 drivers/net/virtio/virtio_pci.h    | 16 ++++++++++++++++
 3 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index fe0e292ef..8a6e1933a 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1662,7 +1662,8 @@ virtio_configure_intr(struct rte_eth_dev *dev)
 
 	return 0;
 }
-
+#define SPEED_UNKNOWN    0xffffffff
+#define DUPLEX_UNKNOWN   0xff
 /* reset device and renegotiate features if needed */
 static int
 virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
@@ -1718,6 +1719,25 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
 		     hw->mac_addr[0], hw->mac_addr[1], hw->mac_addr[2],
 		     hw->mac_addr[3], hw->mac_addr[4], hw->mac_addr[5]);
 
+	if (hw->speed == SPEED_UNKNOWN) {
+		if (vtpci_with_feature(hw, VIRTIO_NET_F_SPEED_DUPLEX)) {
+			config = &local_config;
+			vtpci_read_dev_config(hw,
+				offsetof(struct virtio_net_config, speed),
+				&config->speed, sizeof(config->speed));
+			vtpci_read_dev_config(hw,
+				offsetof(struct virtio_net_config, duplex),
+				&config->duplex, sizeof(config->duplex));
+			hw->speed = config->speed;
+			hw->duplex = config->duplex;
+		}
+	}
+	if (hw->speed == SPEED_UNKNOWN)
+		hw->speed = ETH_SPEED_NUM_10G;
+	if (hw->duplex == DUPLEX_UNKNOWN)
+		hw->duplex = ETH_LINK_FULL_DUPLEX;
+	PMD_INIT_LOG(DEBUG, "link speed = %d, duplex = %d",
+		hw->speed, hw->duplex);
 	if (vtpci_with_feature(hw, VIRTIO_NET_F_CTRL_VQ)) {
 		config = &local_config;
 
@@ -1865,7 +1885,7 @@ int
 eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
 {
 	struct virtio_hw *hw = eth_dev->data->dev_private;
-	uint32_t speed = ETH_SPEED_NUM_10G;
+	uint32_t speed = SPEED_UNKNOWN;
 	int ret;
 
 	if (sizeof(struct virtio_net_hdr_mrg_rxbuf) > RTE_PKTMBUF_HEADROOM) {
@@ -2450,7 +2470,7 @@ virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complet
 	struct virtio_hw *hw = dev->data->dev_private;
 
 	memset(&link, 0, sizeof(link));
-	link.link_duplex = ETH_LINK_FULL_DUPLEX;
+	link.link_duplex = hw->duplex;
 	link.link_speed  = hw->speed;
 	link.link_autoneg = ETH_LINK_FIXED;
 
diff --git a/drivers/net/virtio/virtio_ethdev.h b/drivers/net/virtio/virtio_ethdev.h
index cd8947656..febaf17a8 100644
--- a/drivers/net/virtio/virtio_ethdev.h
+++ b/drivers/net/virtio/virtio_ethdev.h
@@ -37,7 +37,8 @@
 	 1ULL << VIRTIO_F_RING_PACKED	  |	\
 	 1ULL << VIRTIO_F_IOMMU_PLATFORM  |	\
 	 1ULL << VIRTIO_F_ORDER_PLATFORM  |	\
-	 1ULL << VIRTIO_F_NOTIFICATION_DATA)
+	 1ULL << VIRTIO_F_NOTIFICATION_DATA | \
+	 1ULL << VIRTIO_NET_F_SPEED_DUPLEX)
 
 #define VIRTIO_PMD_SUPPORTED_GUEST_FEATURES	\
 	(VIRTIO_PMD_DEFAULT_GUEST_FEATURES |	\
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index ed98e11c3..bd89357e4 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -141,6 +141,9 @@ struct virtnet_ctl;
  */
 #define VIRTIO_F_NOTIFICATION_DATA 38
 
+/* Device set linkspeed and duplex */
+#define VIRTIO_NET_F_SPEED_DUPLEX 63
+
 /* The Guest publishes the used index for which it expects an interrupt
  * at the end of the avail ring. Host should ignore the avail->flags field. */
 /* The Host publishes the avail index for which it expects a kick
@@ -260,6 +263,7 @@ struct virtio_hw {
 	uint8_t     mac_addr[RTE_ETHER_ADDR_LEN];
 	uint32_t    notify_off_multiplier;
 	uint32_t    speed;  /* link speed in MB */
+	uint8_t     duplex;
 	uint8_t     *isr;
 	uint16_t    *notify_base;
 	struct virtio_pci_common_cfg *common_cfg;
@@ -306,6 +310,18 @@ struct virtio_net_config {
 	uint16_t   status;
 	uint16_t   max_virtqueue_pairs;
 	uint16_t   mtu;
+	/*
+	 * speed, in units of 1Mb. All values 0 to INT_MAX are legal.
+	 * Any other value stands for unknown.
+	 */
+	uint32_t speed;
+	/*
+	 * 0x00 - half duplex
+	 * 0x01 - full duplex
+	 * Any other value stands for unknown.
+	 */
+	uint8_t duplex;
+
 } __attribute__((packed));
 
 /*
-- 
2.17.1



More information about the dev mailing list