[dpdk-dev] [EXT] Re: input port in mbuf

[Stephen Hemminger]

On Wed, 6 May 2020 19:48:26 +0000
Liron Himi <lironh at marvell.com> wrote:

> Fine. Is there another location or option to save this information?
> 
> Regards,
> Liron
> 
> -----Original Message-----
> From: Stephen Hemminger <stephen at networkplumber.org> 
> Sent: Wednesday, 6 May 2020 22:43
> To: Liron Himi <lironh at marvell.com>
> Cc: dpdk-dev <dev at dpdk.org>
> Subject: [EXT] Re: [dpdk-dev] input port in mbuf
> 
> External Email
> 
> ----------------------------------------------------------------------
> On Wed, 6 May 2020 19:21:30 +0000
> Liron Himi <lironh at marvell.com> wrote:
> 
> > Hi,
> > 
> > We need to save the input port in the mbuf in order to return the buffer to the right hw pool.
> > For now we use the 'port' in the mbuf as it is supposed to be for this exact purpose.
> > But we noticed that some applications are override it with the destination port.
> > 
> > What should be the right behavior?
> > is there another location that that this information can be stored and read only by the ethdev drivers?
> > 
> > Regards,
> > Liron
> >   
> 
> There is no requirement that input port is unmodified by the application.

The memory pool is already in the mbuf, should go there.