[dpdk-dev] [PATCH] doc: add required Linux capabilities in mlx5 guide

Moshe Levi moshele at mellanox.com
Thu May 14 19:29:30 CEST 2020


Hi Raslan, 
PSB

> -----Original Message-----
> From: Raslan Darawsheh <rasland at mellanox.com>
> Sent: Thursday, May 14, 2020 11:24 AM
> To: Thomas Monjalon <thomas at monjalon.net>; dev at dpdk.org
> Cc: Adrian Chiris <adrianc at mellanox.com>; Moshe Levi
> <moshele at mellanox.com>; Matan Azrad <matan at mellanox.com>; Shahaf
> Shuler <shahafs at mellanox.com>; Slava Ovsiienko
> <viacheslavo at mellanox.com>; John McNamara
> <john.mcnamara at intel.com>; Marko Kovacevic
> <marko.kovacevic at intel.com>
> Subject: RE: [dpdk-dev] [PATCH] doc: add required Linux capabilities in mlx5
> guide
> 
> Hi,
> 
> > -----Original Message-----
> > From: dev <dev-bounces at dpdk.org> On Behalf Of Thomas Monjalon
> > Sent: Tuesday, March 3, 2020 1:09 AM
> > To: dev at dpdk.org
> > Cc: Adrian Chiris <adrianc at mellanox.com>; Moshe Levi
> > <moshele at mellanox.com>; Matan Azrad <matan at mellanox.com>; Shahaf
> > Shuler <shahafs at mellanox.com>; Slava Ovsiienko
> > <viacheslavo at mellanox.com>; John McNamara
> <john.mcnamara at intel.com>;
> > Marko Kovacevic <marko.kovacevic at intel.com>
> > Subject: [dpdk-dev] [PATCH] doc: add required Linux capabilities in
> > mlx5 guide
> >
> > If running DPDK as non-root, some extra capabilities may be required.
> > The Mellanox devices, using a bifurcated model with Linux drivers,
> > have some specific requirements summarized in mlx5 PMD guide.
> >
> > Signed-off-by: Thomas Monjalon <thomas at monjalon.net>
> Reviewed-by: Raslan Darwsheh <rasland at mellanox.com>
> > ---
> >  doc/guides/nics/mlx5.rst | 26 ++++++++++++++++++++++++++
> >  1 file changed, 26 insertions(+)
> >
> > diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index
> > afd11cd830..7650e57dd0 100644
> > --- a/doc/guides/nics/mlx5.rst
> > +++ b/doc/guides/nics/mlx5.rst
> > @@ -359,6 +359,32 @@ Run-time configuration
> >
> >  - **ethtool** operations on related kernel interfaces also affect the PMD.
> >
> > +Run as non-root
> > +^^^^^^^^^^^^^^^
> > +
> > +In order to run as a non-root user,
> > +some capabilities must be granted to the application::
> > +
> > +   setcap cap_sys_admin,cap_net_admin,cap_net_raw,cap_ipc_lock+ep
> > <dpdk-app>
> > +
> > +Below are the reasons of the need for each capability:
> > +
> > +``cap_sys_admin``
> > +   When using physical addresses (PA mode), with Linux >= 4.0,
> > +   for access to ``/proc/self/pagemap``.
> > +
> > +``cap_net_admin``
> > +   For MTU and link state modifications
It more than that like change mac address . maybe better to write for interface configuration 
You can see the full list in [1] look for CAP_NET_ADMIN
[1] - http://man7.org/linux/man-pages/man7/capabilities.7.html
.
> > +
> > +``cap_net_raw``
> > +   For raw ethernet queue allocation through kernel driver.
Maybe can you add a note that for containers the net_raw is enabled by default see [1] and you don't need to specify it. 
 [1] - https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities 
> > +
> > +``cap_ipc_lock``
> > +   For DMA memory pinning.
> > +
> > +Driver options
> > +^^^^^^^^^^^^^^
> > +
> >  - ``rxq_cqe_comp_en`` parameter [int]
> >
> >    A nonzero value enables the compression of CQE on RX side. This
> > feature
> > --
> > 2.25.1
> 
> 
> Patch applied to next-net-mlx,
> 
> Kindest regards,
> Raslan Darawsheh


More information about the dev mailing list