[dpdk-dev] 【BUG REPORT】l3fwd-power can not exit by ctrl+c

[Burakov, Anatoly]

On 20-May-20 9:41 AM, oulijun wrote:
> 
> 
> 在 2020/5/20 15:22, David Marchand 写道:
>> Hello,
>>
>> On Wed, May 20, 2020 at 5:18 AM oulijun <oulijun at huawei.com> wrote:
>>>      I am using 20.05-rc2 version to test based on HNS3 NIC hardware, 
>>> and
>>> found that after starting l3fwd-power,
>>>
>>> using ctrl+c cannot force quit. But I revert the patch(33666b4 service:
>>> fix crash on exit) and it is ok.
>>
>> We had a fix in rc1 that is supposed to fix this.
>> https://git.dpdk.org/dpdk/commit?id=613ce6691c0d5ac0f99d7995f1e8e4ac86643882 
>>
>>
>> Copying Anatoly and David H. too.

Yes, and also this fix:

https://git.dpdk.org/dpdk/commit/?id=f4d1e19c293dc95073614f630ea729cf0bfb57b7

It's part of rc2 as well. With the above two fixes, all problems with 
quitting the app should have been fixed (and were fixed, according to 
our testing).

>>
>>
>>>
>>> the log as follows:
>>>
>>> Initializing rx queues on lcore 26 ...
>>> Initializing rx queues on lcore 27 ... rxq=0,0,0 Port 0: softly parse
>>> packet type info
>>>
>>>
>>> Checking link status...............0000:7d:00.1
>>> hns3_update_link_status(): Link status change to up!
>>> done
>>> Port 0 Link Up - speed 25000 Mbps - full-duplex
>>> L3FWD_POWER: entering main loop on lcore 27
>>> L3FWD_POWER:  -- lcoreid=27 portid=0 rxqueueid=0
>>> L3FWD_POWER: lcore 26 has nothing to do
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> L3FWD_POWER: lcore 27 is waked up from rx interrupt on port 0 queue 0
>>> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
>>> ^CPOWER: Power management governor of lcore 26 has been set back to
>>> successfully
>>> POWER: Power management of lcore 26 has exited from 'userspace' mode and
>>> been set back to the original
>>> POWER: Power management governor of lcore 27 has been set back to
>>> successfully
>>> POWER: Power management of lcore 27 has exited from 'userspace' mode and
>>> been set back to the original
>>> 0000:7d:00.1 hns3_dev_close(): Close port 0 finished
>>> User forced exit
>>> [root at centos-C3 build]#
>>
>> So I understand those traces are for when it works.
>>
>> What about the traces when it does not work?

Yes, supplying log "when it worked" is not helpful if the goal is to 
figure out what went wrong :)

>> Can you get a backtrace to know where the process is stuck?
> I think that it is entered the rte_exit and can not eixt
>>
>>
>> Thanks for reporting.
>>
> the log as follows when it not works:
> L3FWD_POWER: lcore 27 sleeps until interrupt triggers
> ^CPOWER: Power management governor of lcore 26 has been set back to 
> successfully
> POWER: Power management of lcore 26 has exited from 'userspace' mode and 
> been set back to the original
> POWER: Power management governor of lcore 27 has been set back to 
> successfully
> POWER: Power management of lcore 27 has exited from 'userspace' mode and 
> been set back to the original
> 0000:7d:00.1 hns3_dev_close(): Close port 0 finished
> User forced exit

Again, this looks like a pre-rc1 log. Please retest with latest rc2 code.

> 
> 
> 
> 
> it can not exit and enter the shell window.
> 
> Thanks
> 


-- 
Thanks,
Anatoly