[dpdk-dev] [PATCH v14 2/2] eal: support for VFIO-PCI VF token
Haiyue Wang
haiyue.wang at intel.com
Thu May 28 03:22:25 CEST 2020
The kernel module vfio-pci introduces the VF token to enable SR-IOV
support since 5.7.
The VF token can be set by a vfio-pci based PF driver and must be known
by the vfio-pci based VF driver in order to gain access to the device.
Signed-off-by: Haiyue Wang <haiyue.wang at intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov at intel.com>
Acked-by: Andrew Rybchenko <arybchenko at solarflare.com>
---
doc/guides/linux_gsg/linux_drivers.rst | 35 ++++++++++++++++++-
doc/guides/linux_gsg/linux_eal_parameters.rst | 4 +++
doc/guides/rel_notes/release_20_08.rst | 5 +++
lib/librte_eal/common/eal_common_options.c | 2 ++
lib/librte_eal/common/eal_internal_cfg.h | 2 ++
lib/librte_eal/common/eal_options.h | 2 ++
lib/librte_eal/freebsd/eal.c | 4 +++
lib/librte_eal/include/rte_eal.h | 12 +++++++
lib/librte_eal/linux/eal.c | 29 +++++++++++++++
lib/librte_eal/linux/eal_vfio.c | 19 ++++++++++
lib/librte_eal/rte_eal_version.map | 1 +
11 files changed, 114 insertions(+), 1 deletion(-)
diff --git a/doc/guides/linux_gsg/linux_drivers.rst b/doc/guides/linux_gsg/linux_drivers.rst
index d40b495c1..02fba7d1e 100644
--- a/doc/guides/linux_gsg/linux_drivers.rst
+++ b/doc/guides/linux_gsg/linux_drivers.rst
@@ -78,11 +78,44 @@ Note that in order to use VFIO, your kernel must support it.
VFIO kernel modules have been included in the Linux kernel since version 3.6.0 and are usually present by default,
however please consult your distributions documentation to make sure that is the case.
+The ``vfio-pci`` module since Linux version 5.7 supports the creation of virtual
+functions. After the PF is bound to vfio-pci module, the user can create the VFs
+by sysfs interface, and these VFs are bound to vfio-pci module automatically.
+
+When the PF is bound to vfio-pci, it has initial VF token generated by random. For
+security reason, this token is write only, the user can't read it from the kernel
+directly. For accessing the VF, the user needs to start the PF with token parameter
+to setup a VF token (uuid format), then the VF can be accessed with this new known
+VF token.
+
+DPDK will use the EAL parameter ``--vfio-vf-token`` to specify the VF token value to
+PF and its related VFs, this VF token will be shared in all VFIO devices, including
+the different PFs.
+
+.. code-block:: console
+
+ 1. Generate the VF token by uuid command
+ 14d63f20-8445-11ea-8900-1f9ce7d5650d
+
+ 2. sudo modprobe vfio-pci enable_sriov=1
+
+ 2. ./usertools/dpdk-devbind.py -b vfio-pci 0000:86:00.0
+
+ 3. echo 2 > /sys/bus/pci/devices/0000:86:00.0/sriov_numvfs
+
+ 4. Start the PF:
+ ./x86_64-native-linux-gcc/app/testpmd -l 22-25 -n 4 -w 86:00.0 \
+ --vfio-vf-token=14d63f20-8445-11ea-8900-1f9ce7d5650d --file-prefix=pf -- -i
+
+ 5. Start the VF:
+ ./x86_64-native-linux-gcc/app/testpmd -l 26-29 -n 4 -w 86:02.0 \
+ --vfio-vf-token=14d63f20-8445-11ea-8900-1f9ce7d5650d --file-prefix=vf0 -- -i
+
Also, to use VFIO, both kernel and BIOS must support and be configured to use IO virtualization (such as Intel® VT-d).
.. note::
- ``vfio-pci`` module doesn't support the creation of virtual functions.
+ ``vfio-pci`` module doesn't support the creation of virtual functions before Linux version 5.7.
For proper operation of VFIO when running DPDK applications as a non-privileged user, correct permissions should also be set up.
This can be done by using the DPDK setup script (called dpdk-setup.sh and located in the usertools directory).
diff --git a/doc/guides/linux_gsg/linux_eal_parameters.rst b/doc/guides/linux_gsg/linux_eal_parameters.rst
index b2cc60e44..bd3977cb3 100644
--- a/doc/guides/linux_gsg/linux_eal_parameters.rst
+++ b/doc/guides/linux_gsg/linux_eal_parameters.rst
@@ -40,6 +40,10 @@ Device-related options
Use specified interrupt mode for devices bound to VFIO kernel driver.
+* ``--vfio-vf-token <uuid>``
+
+ Use specified VF token for devices bound to VFIO kernel driver.
+
Multiprocessing-related options
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/guides/rel_notes/release_20_08.rst b/doc/guides/rel_notes/release_20_08.rst
index 39064afbe..dfce08b89 100644
--- a/doc/guides/rel_notes/release_20_08.rst
+++ b/doc/guides/rel_notes/release_20_08.rst
@@ -56,6 +56,11 @@ New Features
Also, make sure to start the actual text at the margin.
=========================================================
+* **Added the support for vfio-pci new VF token interface.**
+
+ Since Linux version 5.7, vfio-pci supports a shared VF token (UUID) to represent
+ the trust between SR-IOV PF and the created VFs. Update the method to gain access
+ to the PF and VFs devices by appending the VF token parameter.
Removed Items
-------------
diff --git a/lib/librte_eal/common/eal_common_options.c b/lib/librte_eal/common/eal_common_options.c
index 8f2cbd1c6..e7b643a99 100644
--- a/lib/librte_eal/common/eal_common_options.c
+++ b/lib/librte_eal/common/eal_common_options.c
@@ -92,6 +92,7 @@ eal_long_options[] = {
{OPT_SYSLOG, 1, NULL, OPT_SYSLOG_NUM },
{OPT_VDEV, 1, NULL, OPT_VDEV_NUM },
{OPT_VFIO_INTR, 1, NULL, OPT_VFIO_INTR_NUM },
+ {OPT_VFIO_VF_TOKEN, 1, NULL, OPT_VFIO_VF_TOKEN_NUM },
{OPT_VMWARE_TSC_MAP, 0, NULL, OPT_VMWARE_TSC_MAP_NUM },
{OPT_LEGACY_MEM, 0, NULL, OPT_LEGACY_MEM_NUM },
{OPT_SINGLE_FILE_SEGMENTS, 0, NULL, OPT_SINGLE_FILE_SEGMENTS_NUM},
@@ -297,6 +298,7 @@ eal_reset_internal_config(struct internal_config *internal_cfg)
/* if set to NONE, interrupt mode is determined automatically */
internal_cfg->vfio_intr_mode = RTE_INTR_MODE_NONE;
+ memset(internal_cfg->vfio_vf_token, 0, sizeof(rte_uuid_t));
#ifdef RTE_LIBEAL_USE_HPET
internal_cfg->no_hpet = 0;
diff --git a/lib/librte_eal/common/eal_internal_cfg.h b/lib/librte_eal/common/eal_internal_cfg.h
index c650bc081..43095b7a2 100644
--- a/lib/librte_eal/common/eal_internal_cfg.h
+++ b/lib/librte_eal/common/eal_internal_cfg.h
@@ -72,6 +72,8 @@ struct internal_config {
volatile int syslog_facility; /**< facility passed to openlog() */
/** default interrupt mode for VFIO */
volatile enum rte_intr_mode vfio_intr_mode;
+ /** the shared VF token for VFIO-PCI bound PF and VFs devices */
+ rte_uuid_t vfio_vf_token;
char *hugefile_prefix; /**< the base filename of hugetlbfs files */
char *hugepage_dir; /**< specific hugetlbfs directory to use */
char *user_mbuf_pool_ops_name;
diff --git a/lib/librte_eal/common/eal_options.h b/lib/librte_eal/common/eal_options.h
index 18e6da9ab..89769d48b 100644
--- a/lib/librte_eal/common/eal_options.h
+++ b/lib/librte_eal/common/eal_options.h
@@ -69,6 +69,8 @@ enum {
OPT_VDEV_NUM,
#define OPT_VFIO_INTR "vfio-intr"
OPT_VFIO_INTR_NUM,
+#define OPT_VFIO_VF_TOKEN "vfio-vf-token"
+ OPT_VFIO_VF_TOKEN_NUM,
#define OPT_VMWARE_TSC_MAP "vmware-tsc-map"
OPT_VMWARE_TSC_MAP_NUM,
#define OPT_LEGACY_MEM "legacy-mem"
diff --git a/lib/librte_eal/freebsd/eal.c b/lib/librte_eal/freebsd/eal.c
index c41f265fa..4ff5028d8 100644
--- a/lib/librte_eal/freebsd/eal.c
+++ b/lib/librte_eal/freebsd/eal.c
@@ -1005,6 +1005,10 @@ rte_eal_vfio_intr_mode(void)
return RTE_INTR_MODE_NONE;
}
+void rte_eal_vfio_get_vf_token(__rte_unused rte_uuid_t vf_token)
+{
+}
+
int rte_vfio_setup_device(__rte_unused const char *sysfs_base,
__rte_unused const char *dev_addr,
__rte_unused int *vfio_dev_fd,
diff --git a/lib/librte_eal/include/rte_eal.h b/lib/librte_eal/include/rte_eal.h
index 2f9ed298d..744370013 100644
--- a/lib/librte_eal/include/rte_eal.h
+++ b/lib/librte_eal/include/rte_eal.h
@@ -21,6 +21,7 @@
#include <rte_bus.h>
#include <rte_pci_dev_feature_defs.h>
+#include <rte_uuid.h>
#ifdef __cplusplus
extern "C" {
@@ -438,6 +439,17 @@ int rte_eal_create_uio_dev(void);
*/
enum rte_intr_mode rte_eal_vfio_intr_mode(void);
+
+/**
+ * Copy the user-configured vfio VF token.
+ *
+ * @param vf_token
+ * vfio VF token configured with the command line is copied
+ * into this parameter, zero uuid by default.
+ */
+__rte_experimental
+void rte_eal_vfio_get_vf_token(rte_uuid_t vf_token);
+
/**
* A wrap API for syscall gettid.
*
diff --git a/lib/librte_eal/linux/eal.c b/lib/librte_eal/linux/eal.c
index f162124a3..00f3fdced 100644
--- a/lib/librte_eal/linux/eal.c
+++ b/lib/librte_eal/linux/eal.c
@@ -558,6 +558,7 @@ eal_usage(const char *prgname)
" --"OPT_FILE_PREFIX" Prefix for hugepage filenames\n"
" --"OPT_CREATE_UIO_DEV" Create /dev/uioX (usually done by hotplug)\n"
" --"OPT_VFIO_INTR" Interrupt mode for VFIO (legacy|msi|msix)\n"
+ " --"OPT_VFIO_VF_TOKEN" VF token (UUID) shared between SR-IOV PF and VFs\n"
" --"OPT_LEGACY_MEM" Legacy memory mode (no dynamic allocation, contiguous segments)\n"
" --"OPT_SINGLE_FILE_SEGMENTS" Put all hugepage memory in single files\n"
" --"OPT_MATCH_ALLOCATIONS" Free hugepages exactly as allocated\n"
@@ -649,6 +650,19 @@ eal_parse_vfio_intr(const char *mode)
return -1;
}
+static int
+eal_parse_vfio_vf_token(const char *vf_token)
+{
+ rte_uuid_t uuid;
+
+ if (!rte_uuid_parse(vf_token, uuid)) {
+ rte_uuid_copy(internal_config.vfio_vf_token, uuid);
+ return 0;
+ }
+
+ return -1;
+}
+
/* Parse the arguments for --log-level only */
static void
eal_log_level_parse(int argc, char **argv)
@@ -787,6 +801,16 @@ eal_parse_args(int argc, char **argv)
}
break;
+ case OPT_VFIO_VF_TOKEN_NUM:
+ if (eal_parse_vfio_vf_token(optarg) < 0) {
+ RTE_LOG(ERR, EAL, "invalid parameters for --"
+ OPT_VFIO_VF_TOKEN "\n");
+ eal_usage(prgname);
+ ret = -1;
+ goto out;
+ }
+ break;
+
case OPT_CREATE_UIO_DEV_NUM:
internal_config.create_uio_dev = 1;
break;
@@ -1370,6 +1394,11 @@ rte_eal_vfio_intr_mode(void)
return internal_config.vfio_intr_mode;
}
+void rte_eal_vfio_get_vf_token(rte_uuid_t vf_token)
+{
+ rte_uuid_copy(vf_token, internal_config.vfio_vf_token);
+}
+
int
rte_eal_check_module(const char *module_name)
{
diff --git a/lib/librte_eal/linux/eal_vfio.c b/lib/librte_eal/linux/eal_vfio.c
index d26e1649a..5b2f6b305 100644
--- a/lib/librte_eal/linux/eal_vfio.c
+++ b/lib/librte_eal/linux/eal_vfio.c
@@ -712,6 +712,7 @@ rte_vfio_setup_device(const char *sysfs_base, const char *dev_addr,
int vfio_container_fd;
int vfio_group_fd;
int iommu_group_num;
+ rte_uuid_t vf_token;
int i, ret;
/* get group number */
@@ -895,6 +896,23 @@ rte_vfio_setup_device(const char *sysfs_base, const char *dev_addr,
t->type_id, t->name);
}
+ rte_eal_vfio_get_vf_token(vf_token);
+
+ /* get a file descriptor for the device with VF token firstly */
+ if (!rte_uuid_is_null(vf_token)) {
+ char vf_token_str[RTE_UUID_STRLEN];
+ char dev[PATH_MAX];
+
+ rte_uuid_unparse(vf_token, vf_token_str, sizeof(vf_token_str));
+ snprintf(dev, sizeof(dev),
+ "%s vf_token=%s", dev_addr, vf_token_str);
+
+ *vfio_dev_fd = ioctl(vfio_group_fd, VFIO_GROUP_GET_DEVICE_FD,
+ dev);
+ if (*vfio_dev_fd >= 0)
+ goto dev_get_info;
+ }
+
/* get a file descriptor for the device */
*vfio_dev_fd = ioctl(vfio_group_fd, VFIO_GROUP_GET_DEVICE_FD, dev_addr);
if (*vfio_dev_fd < 0) {
@@ -909,6 +927,7 @@ rte_vfio_setup_device(const char *sysfs_base, const char *dev_addr,
return -1;
}
+dev_get_info:
/* test and setup the device */
ret = ioctl(*vfio_dev_fd, VFIO_DEVICE_GET_INFO, device_info);
if (ret) {
diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/rte_eal_version.map
index d8038749a..93a4d30f8 100644
--- a/lib/librte_eal/rte_eal_version.map
+++ b/lib/librte_eal/rte_eal_version.map
@@ -372,6 +372,7 @@ EXPERIMENTAL {
__rte_trace_point_register;
per_lcore_trace_mem;
per_lcore_trace_point_sz;
+ rte_eal_vfio_get_vf_token;
rte_log_can_log;
rte_thread_getname;
rte_trace_dump;
--
2.26.2
More information about the dev
mailing list