[dpdk-dev] [PATCH v9 10/10] baseband/acc100: add configure function
Chautru, Nicolas
nicolas.chautru at intel.com
Thu Oct 1 00:54:37 CEST 2020
Hi Tom,
> From: Tom Rix <trix at redhat.com>
> On 9/28/20 5:29 PM, Nicolas Chautru wrote:
> > Add configure function to configure the PF from within the
> > bbdev-test itself without external application configuration the device.
> >
> > Signed-off-by: Nicolas Chautru <nicolas.chautru at intel.com>
> > Acked-by: Liu Tianjiao <Tianjiao.liu at intel.com>
> > ---
> > app/test-bbdev/test_bbdev_perf.c | 72 +++
> > doc/guides/rel_notes/release_20_11.rst | 5 +
> > drivers/baseband/acc100/meson.build | 2 +
> > drivers/baseband/acc100/rte_acc100_cfg.h | 17 +
> > drivers/baseband/acc100/rte_acc100_pmd.c | 505
> +++++++++++++++++++++
> > .../acc100/rte_pmd_bbdev_acc100_version.map | 7 +
> > 6 files changed, 608 insertions(+)
> >
> > diff --git a/app/test-bbdev/test_bbdev_perf.c
> > b/app/test-bbdev/test_bbdev_perf.c
> > index 45c0d62..32f23ff 100644
> > --- a/app/test-bbdev/test_bbdev_perf.c
> > +++ b/app/test-bbdev/test_bbdev_perf.c
> > @@ -52,6 +52,18 @@
> > #define FLR_5G_TIMEOUT 610
> > #endif
> >
> > +#ifdef RTE_LIBRTE_PMD_BBDEV_ACC100
> > +#include <rte_acc100_cfg.h>
> > +#define ACC100PF_DRIVER_NAME ("intel_acc100_pf")
> > +#define ACC100VF_DRIVER_NAME ("intel_acc100_vf")
> > +#define ACC100_QMGR_NUM_AQS 16
> > +#define ACC100_QMGR_NUM_QGS 2
> > +#define ACC100_QMGR_AQ_DEPTH 5
> > +#define ACC100_QMGR_INVALID_IDX -1
> > +#define ACC100_QMGR_RR 1
> > +#define ACC100_QOS_GBR 0
> > +#endif
> > +
> > #define OPS_CACHE_SIZE 256U
> > #define OPS_POOL_SIZE_MIN 511U /* 0.5K per queue */
> >
> > @@ -653,6 +665,66 @@ typedef int (test_case_function)(struct
> active_device *ad,
> > info->dev_name);
> > }
> > #endif
> > +#ifdef RTE_LIBRTE_PMD_BBDEV_ACC100
> seems like this function would break if one of the other bbdev's were
> #defined.
No these are independent. By default they are all defined.
> > + if ((get_init_device() == true) &&
> > + (!strcmp(info->drv.driver_name,
> ACC100PF_DRIVER_NAME))) {
> > + struct acc100_conf conf;
> > + unsigned int i;
> > +
> > + printf("Configure ACC100 FEC Driver %s with default
> values\n",
> > + info->drv.driver_name);
> > +
> > + /* clear default configuration before initialization */
> > + memset(&conf, 0, sizeof(struct acc100_conf));
> > +
> > + /* Always set in PF mode for built-in configuration */
> > + conf.pf_mode_en = true;
> > + for (i = 0; i < RTE_ACC100_NUM_VFS; ++i) {
> > + conf.arb_dl_4g[i].gbr_threshold1 =
> ACC100_QOS_GBR;
> > + conf.arb_dl_4g[i].gbr_threshold1 =
> ACC100_QOS_GBR;
> > + conf.arb_dl_4g[i].round_robin_weight =
> ACC100_QMGR_RR;
> > + conf.arb_ul_4g[i].gbr_threshold1 =
> ACC100_QOS_GBR;
> > + conf.arb_ul_4g[i].gbr_threshold1 =
> ACC100_QOS_GBR;
> > + conf.arb_ul_4g[i].round_robin_weight =
> ACC100_QMGR_RR;
> > + conf.arb_dl_5g[i].gbr_threshold1 =
> ACC100_QOS_GBR;
> > + conf.arb_dl_5g[i].gbr_threshold1 =
> ACC100_QOS_GBR;
> > + conf.arb_dl_5g[i].round_robin_weight =
> ACC100_QMGR_RR;
> > + conf.arb_ul_5g[i].gbr_threshold1 =
> ACC100_QOS_GBR;
> > + conf.arb_ul_5g[i].gbr_threshold1 =
> ACC100_QOS_GBR;
> > + conf.arb_ul_5g[i].round_robin_weight =
> ACC100_QMGR_RR;
> > + }
> > +
> > + conf.input_pos_llr_1_bit = true;
> > + conf.output_pos_llr_1_bit = true;
> > + conf.num_vf_bundles = 1; /**< Number of VF bundles to
> setup */
> > +
> > + conf.q_ul_4g.num_qgroups = ACC100_QMGR_NUM_QGS;
> > + conf.q_ul_4g.first_qgroup_index =
> ACC100_QMGR_INVALID_IDX;
> > + conf.q_ul_4g.num_aqs_per_groups =
> ACC100_QMGR_NUM_AQS;
> > + conf.q_ul_4g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH;
> > + conf.q_dl_4g.num_qgroups = ACC100_QMGR_NUM_QGS;
> > + conf.q_dl_4g.first_qgroup_index =
> ACC100_QMGR_INVALID_IDX;
> > + conf.q_dl_4g.num_aqs_per_groups =
> ACC100_QMGR_NUM_AQS;
> > + conf.q_dl_4g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH;
> > + conf.q_ul_5g.num_qgroups = ACC100_QMGR_NUM_QGS;
> > + conf.q_ul_5g.first_qgroup_index =
> ACC100_QMGR_INVALID_IDX;
> > + conf.q_ul_5g.num_aqs_per_groups =
> ACC100_QMGR_NUM_AQS;
> > + conf.q_ul_5g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH;
> > + conf.q_dl_5g.num_qgroups = ACC100_QMGR_NUM_QGS;
> > + conf.q_dl_5g.first_qgroup_index =
> ACC100_QMGR_INVALID_IDX;
> > + conf.q_dl_5g.num_aqs_per_groups =
> ACC100_QMGR_NUM_AQS;
> > + conf.q_dl_5g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH;
> > +
> > + /* setup PF with configuration information */
> > + ret = acc100_configure(info->dev_name, &conf);
> > + TEST_ASSERT_SUCCESS(ret,
> > + "Failed to configure ACC100 PF for bbdev
> %s",
> > + info->dev_name);
> > + /* Let's refresh this now this is configured */
> > + }
> > + rte_bbdev_info_get(dev_id, info);
> The other bbdev's do not call rte_bbdev_info_get, can this be removed ?
Actually it should be added outside for all versions post-configuraion. Thanks
> > +#endif
> > +
> > nb_queues = RTE_MIN(rte_lcore_count(), info- drv.max_num_queues);
> > nb_queues = RTE_MIN(nb_queues, (unsigned int) MAX_QUEUES);
> >
> > diff --git a/doc/guides/rel_notes/release_20_11.rst
> > b/doc/guides/rel_notes/release_20_11.rst
> > index 73ac08f..c8d0586 100644
> > --- a/doc/guides/rel_notes/release_20_11.rst
> > +++ b/doc/guides/rel_notes/release_20_11.rst
> > @@ -55,6 +55,11 @@ New Features
> > Also, make sure to start the actual text at the margin.
> > =======================================================
> >
> > +* **Added Intel ACC100 bbdev PMD.**
> > +
> > + Added a new ``acc100`` bbdev driver for the Intel\ |reg| ACC100
> > + accelerator also known as Mount Bryce. See the
> > + :doc:`../bbdevs/acc100` BBDEV guide for more details on this new driver.
> >
> > Removed Items
> > -------------
> > diff --git a/drivers/baseband/acc100/meson.build
> > b/drivers/baseband/acc100/meson.build
> > index 8afafc2..7ac44dc 100644
> > --- a/drivers/baseband/acc100/meson.build
> > +++ b/drivers/baseband/acc100/meson.build
> > @@ -4,3 +4,5 @@
> > deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci']
> >
> > sources = files('rte_acc100_pmd.c')
> > +
> > +install_headers('rte_acc100_cfg.h')
> > diff --git a/drivers/baseband/acc100/rte_acc100_cfg.h
> > b/drivers/baseband/acc100/rte_acc100_cfg.h
> > index 73bbe36..7f523bc 100644
> > --- a/drivers/baseband/acc100/rte_acc100_cfg.h
> > +++ b/drivers/baseband/acc100/rte_acc100_cfg.h
> > @@ -89,6 +89,23 @@ struct acc100_conf {
> > struct rte_arbitration_t arb_dl_5g[RTE_ACC100_NUM_VFS]; };
> >
> > +/**
> > + * Configure a ACC100 device
> > + *
> > + * @param dev_name
> > + * The name of the device. This is the short form of PCI BDF, e.g. 00:01.0.
> > + * It can also be retrieved for a bbdev device from the dev_name field in
> the
> > + * rte_bbdev_info structure returned by rte_bbdev_info_get().
> > + * @param conf
> > + * Configuration to apply to ACC100 HW.
> > + *
> > + * @return
> > + * Zero on success, negative value on failure.
> > + */
> > +__rte_experimental
> > +int
> > +acc100_configure(const char *dev_name, struct acc100_conf *conf);
> > +
> > #ifdef __cplusplus
> > }
> > #endif
> > diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c
> > b/drivers/baseband/acc100/rte_acc100_pmd.c
> > index 3589814..b50dd32 100644
> > --- a/drivers/baseband/acc100/rte_acc100_pmd.c
> > +++ b/drivers/baseband/acc100/rte_acc100_pmd.c
> > @@ -85,6 +85,26 @@
> >
> > enum {UL_4G = 0, UL_5G, DL_4G, DL_5G, NUM_ACC};
> >
> > +/* Return the accelerator enum for a Queue Group Index */ static
> > +inline int accFromQgid(int qg_idx, const struct acc100_conf
> > +*acc100_conf) {
> > + int accQg[ACC100_NUM_QGRPS];
> > + int NumQGroupsPerFn[NUM_ACC];
> > + int acc, qgIdx, qgIndex = 0;
> > + for (qgIdx = 0; qgIdx < ACC100_NUM_QGRPS; qgIdx++)
> > + accQg[qgIdx] = 0;
> > + NumQGroupsPerFn[UL_4G] = acc100_conf->q_ul_4g.num_qgroups;
> > + NumQGroupsPerFn[UL_5G] = acc100_conf->q_ul_5g.num_qgroups;
> > + NumQGroupsPerFn[DL_4G] = acc100_conf->q_dl_4g.num_qgroups;
> > + NumQGroupsPerFn[DL_5G] = acc100_conf->q_dl_5g.num_qgroups;
> > + for (acc = UL_4G; acc < NUM_ACC; acc++)
> > + for (qgIdx = 0; qgIdx < NumQGroupsPerFn[acc]; qgIdx++)
> > + accQg[qgIndex++] = acc;
>
> This looks inefficient, is there a way this could be calculated
> without filling arrays to
>
> access 1 value ?
That is not time critical, and the same common code is run each time.
>
> > + acc = accQg[qg_idx];
> > + return acc;
> > +}
> > +
> > /* Return the queue topology for a Queue Group Index */ static
> > inline void qtopFromAcc(struct rte_q_topology_t **qtop, int
> > acc_enum, @@ -113,6 +133,30 @@
> > *qtop = p_qtop;
> > }
> >
> > +/* Return the AQ depth for a Queue Group Index */ static inline int
> > +aqDepth(int qg_idx, struct acc100_conf *acc100_conf) {
> > + struct rte_q_topology_t *q_top = NULL;
> > + int acc_enum = accFromQgid(qg_idx, acc100_conf);
> > + qtopFromAcc(&q_top, acc_enum, acc100_conf);
> > + if (unlikely(q_top == NULL))
> > + return 0;
>
> This error is not handled well be the callers.
>
> aqNum is similar.
This fails in a consistent basis, by having not queue available and handling this as the default case.
>
> > + return q_top->aq_depth_log2;
> > +}
> > +
> > +/* Return the AQ depth for a Queue Group Index */ static inline int
> > +aqNum(int qg_idx, struct acc100_conf *acc100_conf) {
> > + struct rte_q_topology_t *q_top = NULL;
> > + int acc_enum = accFromQgid(qg_idx, acc100_conf);
> > + qtopFromAcc(&q_top, acc_enum, acc100_conf);
> > + if (unlikely(q_top == NULL))
> > + return 0;
> > + return q_top->num_aqs_per_groups;
> > +}
> > +
> > static void
> > initQTop(struct acc100_conf *acc100_conf) { @@ -4177,3 +4221,464
> > @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
> > RTE_PMD_REGISTER_PCI_TABLE(ACC100PF_DRIVER_NAME,
> > pci_id_acc100_pf_map);
> RTE_PMD_REGISTER_PCI(ACC100VF_DRIVER_NAME,
> > acc100_pci_vf_driver);
> > RTE_PMD_REGISTER_PCI_TABLE(ACC100VF_DRIVER_NAME,
> > pci_id_acc100_vf_map);
> > +
> > +/*
> > + * Implementation to fix the power on status of some 5GUL engines
> > + * This requires DMA permission if ported outside DPDK
> This sounds like a workaround, can more detail be added here ?
There are comments through the code I believe:
- /* Detect engines in undefined state */
- /* Force each engine which is in unspecified state */
- /* Reset LDPC Cores */
- /* Check engine power-on status again */ Do you believe this is not explicit enough. Power-on status may be in an undefined state hence this engine are avtivate with dummy payload to make sure they are in a predicable state once configuration is done.
> > + */
> > +static void
> > +poweron_cleanup(struct rte_bbdev *bbdev, struct acc100_device *d,
> > + struct acc100_conf *conf)
> > +{
> > + int i, template_idx, qg_idx;
> > + uint32_t address, status, payload;
> > + printf("Need to clear power-on 5GUL status in internal memory\n");
> > + /* Reset LDPC Cores */
> > + for (i = 0; i < ACC100_ENGINES_MAX; i++)
> > + acc100_reg_write(d, HWPfFecUl5gCntrlReg +
> > + ACC100_ENGINE_OFFSET * i,
> ACC100_RESET_HI);
> > + usleep(LONG_WAIT);
> > + for (i = 0; i < ACC100_ENGINES_MAX; i++)
> > + acc100_reg_write(d, HWPfFecUl5gCntrlReg +
> > + ACC100_ENGINE_OFFSET * i,
> ACC100_RESET_LO);
> > + usleep(LONG_WAIT);
> > + /* Prepare dummy workload */
> > + alloc_2x64mb_sw_rings_mem(bbdev, d, 0);
> > + /* Set base addresses */
> > + uint32_t phys_high = (uint32_t)(d->sw_rings_phys >> 32);
> > + uint32_t phys_low = (uint32_t)(d->sw_rings_phys &
> > + ~(ACC100_SIZE_64MBYTE-1));
> > + acc100_reg_write(d, HWPfDmaFec5GulDescBaseHiRegVf,
> phys_high);
> > + acc100_reg_write(d, HWPfDmaFec5GulDescBaseLoRegVf, phys_low);
> > +
> > + /* Descriptor for a dummy 5GUL code block processing*/
> > + union acc100_dma_desc *desc = NULL;
> > + desc = d->sw_rings;
> > + desc->req.data_ptrs[0].address = d->sw_rings_phys +
> > + ACC100_DESC_FCW_OFFSET;
> > + desc->req.data_ptrs[0].blen = ACC100_FCW_LD_BLEN;
> > + desc->req.data_ptrs[0].blkid = ACC100_DMA_BLKID_FCW;
> > + desc->req.data_ptrs[0].last = 0;
> > + desc->req.data_ptrs[0].dma_ext = 0;
> > + desc->req.data_ptrs[1].address = d->sw_rings_phys + 512;
> > + desc->req.data_ptrs[1].blkid = ACC100_DMA_BLKID_IN;
> > + desc->req.data_ptrs[1].last = 1;
> > + desc->req.data_ptrs[1].dma_ext = 0;
> > + desc->req.data_ptrs[1].blen = 44;
> > + desc->req.data_ptrs[2].address = d->sw_rings_phys + 1024;
> > + desc->req.data_ptrs[2].blkid = ACC100_DMA_BLKID_OUT_ENC;
> > + desc->req.data_ptrs[2].last = 1;
> > + desc->req.data_ptrs[2].dma_ext = 0;
> > + desc->req.data_ptrs[2].blen = 5;
> > + /* Dummy FCW */
> > + desc->req.fcw_ld.FCWversion = ACC100_FCW_VER;
> > + desc->req.fcw_ld.qm = 1;
> > + desc->req.fcw_ld.nfiller = 30;
> > + desc->req.fcw_ld.BG = 2 - 1;
> > + desc->req.fcw_ld.Zc = 7;
> > + desc->req.fcw_ld.ncb = 350;
> > + desc->req.fcw_ld.rm_e = 4;
> > + desc->req.fcw_ld.itmax = 10;
> > + desc->req.fcw_ld.gain_i = 1;
> > + desc->req.fcw_ld.gain_h = 1;
> > +
> > + int engines_to_restart[SIG_UL_5G_LAST + 1] = {0};
> > + int num_failed_engine = 0;
> > + /* Detect engines in undefined state */
> > + for (template_idx = SIG_UL_5G; template_idx <= SIG_UL_5G_LAST;
> > + template_idx++) {
> > + /* Check engine power-on status */
> > + address = HwPfFecUl5gIbDebugReg +
> > + ACC100_ENGINE_OFFSET * template_idx;
> > + status = (acc100_reg_read(d, address) >> 4) & 0xF;
> > + if (status == 0) {
> > + engines_to_restart[num_failed_engine] =
> template_idx;
> > + num_failed_engine++;
> > + }
> > + }
> > +
> > + int numQqsAcc = conf->q_ul_5g.num_qgroups;
> > + int numQgs = conf->q_ul_5g.num_qgroups;
> > + payload = 0;
> > + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> qg_idx++)
> > + payload |= (1 << qg_idx);
> > + /* Force each engine which is in unspecified state */
> > + for (i = 0; i < num_failed_engine; i++) {
> > + int failed_engine = engines_to_restart[i];
> > + printf("Force engine %d\n", failed_engine);
> > + for (template_idx = SIG_UL_5G; template_idx <=
> SIG_UL_5G_LAST;
> > + template_idx++) {
> > + address = HWPfQmgrGrpTmplateReg4Indx
> > + + BYTES_IN_WORD * template_idx;
> > + if (template_idx == failed_engine)
> > + acc100_reg_write(d, address, payload);
> > + else
> > + acc100_reg_write(d, address, 0);
> > + }
> > + /* Reset descriptor header */
> > + desc->req.word0 = ACC100_DMA_DESC_TYPE;
> > + desc->req.word1 = 0;
> > + desc->req.word2 = 0;
> > + desc->req.word3 = 0;
> > + desc->req.numCBs = 1;
> > + desc->req.m2dlen = 2;
> > + desc->req.d2mlen = 1;
> > + /* Enqueue the code block for processing */
> > + union acc100_enqueue_reg_fmt enq_req;
> > + enq_req.val = 0;
> > + enq_req.addr_offset = ACC100_DESC_OFFSET;
> > + enq_req.num_elem = 1;
> > + enq_req.req_elem_addr = 0;
> > + rte_wmb();
> > + acc100_reg_write(d, HWPfQmgrIngressAq + 0x100,
> enq_req.val);
> > + usleep(LONG_WAIT * 100);
> > + if (desc->req.word0 != 2)
> > + printf("DMA Response %#"PRIx32"\n", desc-
> >req.word0);
> > + }
> > +
> > + /* Reset LDPC Cores */
> > + for (i = 0; i < ACC100_ENGINES_MAX; i++)
> > + acc100_reg_write(d, HWPfFecUl5gCntrlReg +
> > + ACC100_ENGINE_OFFSET * i,
> ACC100_RESET_HI);
> > + usleep(LONG_WAIT);
> > + for (i = 0; i < ACC100_ENGINES_MAX; i++)
> > + acc100_reg_write(d, HWPfFecUl5gCntrlReg +
> > + ACC100_ENGINE_OFFSET * i,
> ACC100_RESET_LO);
> > + usleep(LONG_WAIT);
> > + acc100_reg_write(d, HWPfHi5GHardResetReg,
> ACC100_RESET_HARD);
> > + usleep(LONG_WAIT);
> > + int numEngines = 0;
> > + /* Check engine power-on status again */
> > + for (template_idx = SIG_UL_5G; template_idx <= SIG_UL_5G_LAST;
> > + template_idx++) {
> > + address = HwPfFecUl5gIbDebugReg +
> > + ACC100_ENGINE_OFFSET * template_idx;
> > + status = (acc100_reg_read(d, address) >> 4) & 0xF;
> > + address = HWPfQmgrGrpTmplateReg4Indx
> > + + BYTES_IN_WORD * template_idx;
> > + if (status == 1) {
> > + acc100_reg_write(d, address, payload);
> > + numEngines++;
> > + } else
> > + acc100_reg_write(d, address, 0);
> > + }
> > + printf("Number of 5GUL engines %d\n", numEngines);
> > +
> > + if (d->sw_rings_base != NULL)
> > + rte_free(d->sw_rings_base);
> > + usleep(LONG_WAIT);
> > +}
> > +
> > +/* Initial configuration of a ACC100 device prior to running
> > +configure() */ int acc100_configure(const char *dev_name, struct
> > +acc100_conf *conf) {
> > + rte_bbdev_log(INFO, "acc100_configure");
> > + uint32_t payload, address, status;
>
> maybe value or data would be a better variable name than payload.
>
> would mean changing acc100_reg_write
transparent to me, but can change given DPDK uses term value.
>
> > + int qg_idx, template_idx, vf_idx, acc, i;
> > + struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
> > +
> > + /* Compile time checks */
> > + RTE_BUILD_BUG_ON(sizeof(struct acc100_dma_req_desc) != 256);
> > + RTE_BUILD_BUG_ON(sizeof(union acc100_dma_desc) != 256);
> > + RTE_BUILD_BUG_ON(sizeof(struct acc100_fcw_td) != 24);
> > + RTE_BUILD_BUG_ON(sizeof(struct acc100_fcw_te) != 32);
> > +
> > + if (bbdev == NULL) {
> > + rte_bbdev_log(ERR,
> > + "Invalid dev_name (%s), or device is not yet initialised",
> > + dev_name);
> > + return -ENODEV;
> > + }
> > + struct acc100_device *d = bbdev->data->dev_private;
> > +
> > + /* Store configuration */
> > + rte_memcpy(&d->acc100_conf, conf, sizeof(d->acc100_conf));
> > +
> > + /* PCIe Bridge configuration */
> > + acc100_reg_write(d, HwPfPcieGpexBridgeControl,
> ACC100_CFG_PCI_BRIDGE);
> > + for (i = 1; i < 17; i++)
>
> 17 is a magic number, use a #define
>
> this is a general issue.
These are only used once but still agreed.
>
> > + acc100_reg_write(d,
> > +
> HwPfPcieGpexAxiAddrMappingWindowPexBaseHigh
> > + + i * 16, 0);
> > +
> > + /* PCIe Link Trainiing and Status State Machine */
> > + acc100_reg_write(d, HwPfPcieGpexLtssmStateCntrl, 0xDFC00000);
> > +
> > + /* Prevent blocking AXI read on BRESP for AXI Write */
> > + address = HwPfPcieGpexAxiPioControl;
> > + payload = ACC100_CFG_PCI_AXI;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* 5GDL PLL phase shift */
> > + acc100_reg_write(d, HWPfChaDl5gPllPhshft0, 0x1);
> > +
> > + /* Explicitly releasing AXI as this may be stopped after PF FLR/BME */
> > + address = HWPfDmaAxiControl;
> > + payload = 1;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* DDR Configuration */
> > + address = HWPfDdrBcTim6;
> > + payload = acc100_reg_read(d, address);
> > + payload &= 0xFFFFFFFB; /* Bit 2 */ #ifdef ACC100_DDR_ECC_ENABLE
> > + payload |= 0x4;
> > +#endif
> > + acc100_reg_write(d, address, payload);
> > + address = HWPfDdrPhyDqsCountNum;
> > +#ifdef ACC100_DDR_ECC_ENABLE
> > + payload = 9;
> > +#else
> > + payload = 8;
> > +#endif
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* Set default descriptor signature */
> > + address = HWPfDmaDescriptorSignatuture;
> > + payload = 0;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* Enable the Error Detection in DMA */
> > + payload = ACC100_CFG_DMA_ERROR;
> > + address = HWPfDmaErrorDetectionEn;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* AXI Cache configuration */
> > + payload = ACC100_CFG_AXI_CACHE;
> > + address = HWPfDmaAxcacheReg;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* Default DMA Configuration (Qmgr Enabled) */
> > + address = HWPfDmaConfig0Reg;
> > + payload = 0;
> > + acc100_reg_write(d, address, payload);
> > + address = HWPfDmaQmanen;
> > + payload = 0;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* Default RLIM/ALEN configuration */
> > + address = HWPfDmaConfig1Reg;
> > + payload = (1 << 31) + (23 << 8) + (1 << 6) + 7;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* Configure DMA Qmanager addresses */
> > + address = HWPfDmaQmgrAddrReg;
> > + payload = HWPfQmgrEgressQueuesTemplate;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* ===== Qmgr Configuration ===== */
> > + /* Configuration of the AQueue Depth QMGR_GRP_0_DEPTH_LOG2
> for UL */
> > + int totalQgs = conf->q_ul_4g.num_qgroups +
> > + conf->q_ul_5g.num_qgroups +
> > + conf->q_dl_4g.num_qgroups +
> > + conf->q_dl_5g.num_qgroups;
> > + for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
> > + address = HWPfQmgrDepthLog2Grp +
> > + BYTES_IN_WORD * qg_idx;
> > + payload = aqDepth(qg_idx, conf);
> > + acc100_reg_write(d, address, payload);
> > + address = HWPfQmgrTholdGrp +
> > + BYTES_IN_WORD * qg_idx;
> > + payload = (1 << 16) + (1 << (aqDepth(qg_idx, conf) - 1));
> > + acc100_reg_write(d, address, payload);
> > + }
> > +
> > + /* Template Priority in incremental order */
> > + for (template_idx = 0; template_idx < ACC100_NUM_TMPL;
> > + template_idx++) {
> > + address = HWPfQmgrGrpTmplateReg0Indx +
> > + BYTES_IN_WORD * (template_idx % 8);
> > + payload = TMPL_PRI_0;
> > + acc100_reg_write(d, address, payload);
> > + address = HWPfQmgrGrpTmplateReg1Indx +
> > + BYTES_IN_WORD * (template_idx % 8);
> > + payload = TMPL_PRI_1;
> > + acc100_reg_write(d, address, payload);
> > + address = HWPfQmgrGrpTmplateReg2indx +
> > + BYTES_IN_WORD * (template_idx % 8);
> > + payload = TMPL_PRI_2;
> > + acc100_reg_write(d, address, payload);
> > + address = HWPfQmgrGrpTmplateReg3Indx +
> > + BYTES_IN_WORD * (template_idx % 8);
> > + payload = TMPL_PRI_3;
> > + acc100_reg_write(d, address, payload);
> > + }
> > +
> > + address = HWPfQmgrGrpPriority;
> > + payload = ACC100_CFG_QMGR_HI_P;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* Template Configuration */
> > + for (template_idx = 0; template_idx < ACC100_NUM_TMPL;
> template_idx++) {
> > + payload = 0;
> > + address = HWPfQmgrGrpTmplateReg4Indx
> > + + BYTES_IN_WORD * template_idx;
> > + acc100_reg_write(d, address, payload);
> > + }
> > + /* 4GUL */
> > + int numQgs = conf->q_ul_4g.num_qgroups;
> > + int numQqsAcc = 0;
> > + payload = 0;
> > + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> qg_idx++)
> > + payload |= (1 << qg_idx);
> > + for (template_idx = SIG_UL_4G; template_idx <= SIG_UL_4G_LAST;
> > + template_idx++) {
> > + address = HWPfQmgrGrpTmplateReg4Indx
> > + + BYTES_IN_WORD*template_idx;
> > + acc100_reg_write(d, address, payload);
> > + }
> > + /* 5GUL */
> > + numQqsAcc += numQgs;
> > + numQgs = conf->q_ul_5g.num_qgroups;
> > + payload = 0;
> > + int numEngines = 0;
> > + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> qg_idx++)
> > + payload |= (1 << qg_idx);
> > + for (template_idx = SIG_UL_5G; template_idx <= SIG_UL_5G_LAST;
> > + template_idx++) {
> > + /* Check engine power-on status */
> > + address = HwPfFecUl5gIbDebugReg +
> > + ACC100_ENGINE_OFFSET * template_idx;
> > + status = (acc100_reg_read(d, address) >> 4) & 0xF;
> > + address = HWPfQmgrGrpTmplateReg4Indx
> > + + BYTES_IN_WORD * template_idx;
> > + if (status == 1) {
> > + acc100_reg_write(d, address, payload);
> > + numEngines++;
> > + } else
> > + acc100_reg_write(d, address, 0);
> > + #if RTE_ACC100_SINGLE_FEC == 1
> #if should be at start of line
ok
> > + payload = 0;
> > + #endif
> > + }
> > + printf("Number of 5GUL engines %d\n", numEngines);
> > + /* 4GDL */
> > + numQqsAcc += numQgs;
> > + numQgs = conf->q_dl_4g.num_qgroups;
> > + payload = 0;
> > + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> qg_idx++)
> > + payload |= (1 << qg_idx);
> > + for (template_idx = SIG_DL_4G; template_idx <= SIG_DL_4G_LAST;
> > + template_idx++) {
> > + address = HWPfQmgrGrpTmplateReg4Indx
> > + + BYTES_IN_WORD*template_idx;
> > + acc100_reg_write(d, address, payload);
> > + #if RTE_ACC100_SINGLE_FEC == 1
> > + payload = 0;
> > + #endif
> > + }
> > + /* 5GDL */
> > + numQqsAcc += numQgs;
> > + numQgs = conf->q_dl_5g.num_qgroups;
> > + payload = 0;
> > + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> qg_idx++)
> > + payload |= (1 << qg_idx);
> > + for (template_idx = SIG_DL_5G; template_idx <= SIG_DL_5G_LAST;
> > + template_idx++) {
> > + address = HWPfQmgrGrpTmplateReg4Indx
> > + + BYTES_IN_WORD*template_idx;
> > + acc100_reg_write(d, address, payload);
> > + #if RTE_ACC100_SINGLE_FEC == 1
> > + payload = 0;
> > + #endif
> > + }
> > +
> > + /* Queue Group Function mapping */
> > + int qman_func_id[5] = {0, 2, 1, 3, 4};
> > + address = HWPfQmgrGrpFunction0;
> > + payload = 0;
> > + for (qg_idx = 0; qg_idx < 8; qg_idx++) {
> > + acc = accFromQgid(qg_idx, conf);
> > + payload |= qman_func_id[acc]<<(qg_idx * 4);
> > + }
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* Configuration of the Arbitration QGroup depth to 1 */
> > + for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
> > + address = HWPfQmgrArbQDepthGrp +
> > + BYTES_IN_WORD * qg_idx;
> > + payload = 0;
> > + acc100_reg_write(d, address, payload);
> > + }
> > +
> > + /* Enabling AQueues through the Queue hierarchy*/
> > + for (vf_idx = 0; vf_idx < ACC100_NUM_VFS; vf_idx++) {
> > + for (qg_idx = 0; qg_idx < ACC100_NUM_QGRPS; qg_idx++) {
> > + payload = 0;
> > + if (vf_idx < conf->num_vf_bundles &&
> > + qg_idx < totalQgs)
> > + payload = (1 << aqNum(qg_idx, conf)) - 1;
> > + address = HWPfQmgrAqEnableVf
> > + + vf_idx * BYTES_IN_WORD;
> > + payload += (qg_idx << 16);
> > + acc100_reg_write(d, address, payload);
> > + }
> > + }
> > +
> > + /* This pointer to ARAM (256kB) is shifted by 2 (4B per register) */
> > + uint32_t aram_address = 0;
> > + for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
> > + for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
> > + address = HWPfQmgrVfBaseAddr + vf_idx
> > + * BYTES_IN_WORD + qg_idx
> > + * BYTES_IN_WORD * 64;
> > + payload = aram_address;
> > + acc100_reg_write(d, address, payload);
> > + /* Offset ARAM Address for next memory bank
> > + * - increment of 4B
> > + */
> > + aram_address += aqNum(qg_idx, conf) *
> > + (1 << aqDepth(qg_idx, conf));
> > + }
> > + }
> > +
> > + if (aram_address > WORDS_IN_ARAM_SIZE) {
> > + rte_bbdev_log(ERR, "ARAM Configuration not fitting %d
> %d\n",
> > + aram_address, WORDS_IN_ARAM_SIZE);
> > + return -EINVAL;
> > + }
> > +
> > + /* ==== HI Configuration ==== */
> > +
> > + /* Prevent Block on Transmit Error */
> > + address = HWPfHiBlockTransmitOnErrorEn;
> > + payload = 0;
> > + acc100_reg_write(d, address, payload);
> > + /* Prevents to drop MSI */
> > + address = HWPfHiMsiDropEnableReg;
> > + payload = 0;
> > + acc100_reg_write(d, address, payload);
> > + /* Set the PF Mode register */
> > + address = HWPfHiPfMode;
> > + payload = (conf->pf_mode_en) ? 2 : 0;
> > + acc100_reg_write(d, address, payload);
> > + /* Enable Error Detection in HW */
> > + address = HWPfDmaErrorDetectionEn;
> > + payload = 0x3D7;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* QoS overflow init */
> > + payload = 1;
> > + address = HWPfQosmonAEvalOverflow0;
> > + acc100_reg_write(d, address, payload);
> > + address = HWPfQosmonBEvalOverflow0;
> > + acc100_reg_write(d, address, payload);
> > +
> > + /* HARQ DDR Configuration */
> > + unsigned int ddrSizeInMb = 512; /* Fixed to 512 MB per VF for now
> */
> > + for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
> > + address = HWPfDmaVfDdrBaseRw + vf_idx
> > + * 0x10;
> > + payload = ((vf_idx * (ddrSizeInMb / 64)) << 16) +
> > + (ddrSizeInMb - 1);
> > + acc100_reg_write(d, address, payload);
> > + }
> > + usleep(LONG_WAIT);
> Is sleep needed here ? the reg_write has one.
This one is needed on top
> > +
>
> Since this seems like a workaround, add a comment here.
fair enough, ok, thanks
>
> Tom
>
> > + if (numEngines < (SIG_UL_5G_LAST + 1))
> > + poweron_cleanup(bbdev, d, conf);
> > +
> > + rte_bbdev_log_debug("PF Tip configuration complete for %s",
> dev_name);
> > + return 0;
> > +}
> > diff --git
> > a/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
> > b/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
> > index 4a76d1d..91c234d 100644
> > --- a/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
> > +++ b/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
> > @@ -1,3 +1,10 @@
> > DPDK_21 {
> > local: *;
> > };
> > +
> > +EXPERIMENTAL {
> > + global:
> > +
> > + acc100_configure;
> > +
> > +};
More information about the dev
mailing list