[dpdk-dev] [PATCH v9 10/10] baseband/acc100: add configure function
Chautru, Nicolas
nicolas.chautru at intel.com
Thu Oct 1 23:11:58 CEST 2020
Hi Tom,
> From: Tom Rix <trix at redhat.com>
> On 9/30/20 3:54 PM, Chautru, Nicolas wrote:
> > Hi Tom,
> >
> >> From: Tom Rix <trix at redhat.com>
> >> On 9/28/20 5:29 PM, Nicolas Chautru wrote:
> >>> Add configure function to configure the PF from within the
> >>> bbdev-test itself without external application configuration the device.
> >>>
> >>> Signed-off-by: Nicolas Chautru <nicolas.chautru at intel.com>
> >>> Acked-by: Liu Tianjiao <Tianjiao.liu at intel.com>
> >>> ---
> >>> app/test-bbdev/test_bbdev_perf.c | 72 +++
> >>> doc/guides/rel_notes/release_20_11.rst | 5 +
> >>> drivers/baseband/acc100/meson.build | 2 +
> >>> drivers/baseband/acc100/rte_acc100_cfg.h | 17 +
> >>> drivers/baseband/acc100/rte_acc100_pmd.c | 505
> >> +++++++++++++++++++++
> >>> .../acc100/rte_pmd_bbdev_acc100_version.map | 7 +
> >>> 6 files changed, 608 insertions(+)
> >>>
> >>> diff --git a/app/test-bbdev/test_bbdev_perf.c
> >>> b/app/test-bbdev/test_bbdev_perf.c
> >>> index 45c0d62..32f23ff 100644
> >>> --- a/app/test-bbdev/test_bbdev_perf.c
> >>> +++ b/app/test-bbdev/test_bbdev_perf.c
> >>> @@ -52,6 +52,18 @@
> >>> #define FLR_5G_TIMEOUT 610
> >>> #endif
> >>>
> >>> +#ifdef RTE_LIBRTE_PMD_BBDEV_ACC100
> >>> +#include <rte_acc100_cfg.h>
> >>> +#define ACC100PF_DRIVER_NAME ("intel_acc100_pf")
> >>> +#define ACC100VF_DRIVER_NAME ("intel_acc100_vf")
> >>> +#define ACC100_QMGR_NUM_AQS 16
> >>> +#define ACC100_QMGR_NUM_QGS 2
> >>> +#define ACC100_QMGR_AQ_DEPTH 5
> >>> +#define ACC100_QMGR_INVALID_IDX -1
> >>> +#define ACC100_QMGR_RR 1
> >>> +#define ACC100_QOS_GBR 0
> >>> +#endif
> >>> +
> >>> #define OPS_CACHE_SIZE 256U
> >>> #define OPS_POOL_SIZE_MIN 511U /* 0.5K per queue */
> >>>
> >>> @@ -653,6 +665,66 @@ typedef int (test_case_function)(struct
> >> active_device *ad,
> >>> info->dev_name);
> >>> }
> >>> #endif
> >>> +#ifdef RTE_LIBRTE_PMD_BBDEV_ACC100
> >> seems like this function would break if one of the other bbdev's were
> >> #defined.
> > No these are independent. By default they are all defined.
> ok
> >
> >
> >>> + if ((get_init_device() == true) &&
> >>> + (!strcmp(info->drv.driver_name,
> >> ACC100PF_DRIVER_NAME))) {
> >>> + struct acc100_conf conf;
> >>> + unsigned int i;
> >>> +
> >>> + printf("Configure ACC100 FEC Driver %s with default
> >> values\n",
> >>> + info->drv.driver_name);
> >>> +
> >>> + /* clear default configuration before initialization */
> >>> + memset(&conf, 0, sizeof(struct acc100_conf));
> >>> +
> >>> + /* Always set in PF mode for built-in configuration */
> >>> + conf.pf_mode_en = true;
> >>> + for (i = 0; i < RTE_ACC100_NUM_VFS; ++i) {
> >>> + conf.arb_dl_4g[i].gbr_threshold1 =
> >> ACC100_QOS_GBR;
> >>> + conf.arb_dl_4g[i].gbr_threshold1 =
> >> ACC100_QOS_GBR;
> >>> + conf.arb_dl_4g[i].round_robin_weight =
> >> ACC100_QMGR_RR;
> >>> + conf.arb_ul_4g[i].gbr_threshold1 =
> >> ACC100_QOS_GBR;
> >>> + conf.arb_ul_4g[i].gbr_threshold1 =
> >> ACC100_QOS_GBR;
> >>> + conf.arb_ul_4g[i].round_robin_weight =
> >> ACC100_QMGR_RR;
> >>> + conf.arb_dl_5g[i].gbr_threshold1 =
> >> ACC100_QOS_GBR;
> >>> + conf.arb_dl_5g[i].gbr_threshold1 =
> >> ACC100_QOS_GBR;
> >>> + conf.arb_dl_5g[i].round_robin_weight =
> >> ACC100_QMGR_RR;
> >>> + conf.arb_ul_5g[i].gbr_threshold1 =
> >> ACC100_QOS_GBR;
> >>> + conf.arb_ul_5g[i].gbr_threshold1 =
> >> ACC100_QOS_GBR;
> >>> + conf.arb_ul_5g[i].round_robin_weight =
> >> ACC100_QMGR_RR;
> >>> + }
> >>> +
> >>> + conf.input_pos_llr_1_bit = true;
> >>> + conf.output_pos_llr_1_bit = true;
> >>> + conf.num_vf_bundles = 1; /**< Number of VF bundles to
> >> setup */
> >>> +
> >>> + conf.q_ul_4g.num_qgroups = ACC100_QMGR_NUM_QGS;
> >>> + conf.q_ul_4g.first_qgroup_index =
> >> ACC100_QMGR_INVALID_IDX;
> >>> + conf.q_ul_4g.num_aqs_per_groups =
> >> ACC100_QMGR_NUM_AQS;
> >>> + conf.q_ul_4g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH;
> >>> + conf.q_dl_4g.num_qgroups = ACC100_QMGR_NUM_QGS;
> >>> + conf.q_dl_4g.first_qgroup_index =
> >> ACC100_QMGR_INVALID_IDX;
> >>> + conf.q_dl_4g.num_aqs_per_groups =
> >> ACC100_QMGR_NUM_AQS;
> >>> + conf.q_dl_4g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH;
> >>> + conf.q_ul_5g.num_qgroups = ACC100_QMGR_NUM_QGS;
> >>> + conf.q_ul_5g.first_qgroup_index =
> >> ACC100_QMGR_INVALID_IDX;
> >>> + conf.q_ul_5g.num_aqs_per_groups =
> >> ACC100_QMGR_NUM_AQS;
> >>> + conf.q_ul_5g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH;
> >>> + conf.q_dl_5g.num_qgroups = ACC100_QMGR_NUM_QGS;
> >>> + conf.q_dl_5g.first_qgroup_index =
> >> ACC100_QMGR_INVALID_IDX;
> >>> + conf.q_dl_5g.num_aqs_per_groups =
> >> ACC100_QMGR_NUM_AQS;
> >>> + conf.q_dl_5g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH;
> >>> +
> >>> + /* setup PF with configuration information */
> >>> + ret = acc100_configure(info->dev_name, &conf);
> >>> + TEST_ASSERT_SUCCESS(ret,
> >>> + "Failed to configure ACC100 PF for bbdev
> >> %s",
> >>> + info->dev_name);
> >>> + /* Let's refresh this now this is configured */
> >>> + }
> >>> + rte_bbdev_info_get(dev_id, info);
> >> The other bbdev's do not call rte_bbdev_info_get, can this be removed ?
> > Actually it should be added outside for all versions
> > post-configuraion. Thanks
> >
> >>> +#endif
> >>> +
> >>> nb_queues = RTE_MIN(rte_lcore_count(), info-
> drv.max_num_queues);
> >>> nb_queues = RTE_MIN(nb_queues, (unsigned int) MAX_QUEUES);
> >>>
> >>> diff --git a/doc/guides/rel_notes/release_20_11.rst
> >>> b/doc/guides/rel_notes/release_20_11.rst
> >>> index 73ac08f..c8d0586 100644
> >>> --- a/doc/guides/rel_notes/release_20_11.rst
> >>> +++ b/doc/guides/rel_notes/release_20_11.rst
> >>> @@ -55,6 +55,11 @@ New Features
> >>> Also, make sure to start the actual text at the margin.
> >>> =======================================================
> >>>
> >>> +* **Added Intel ACC100 bbdev PMD.**
> >>> +
> >>> + Added a new ``acc100`` bbdev driver for the Intel\ |reg| ACC100
> >>> + accelerator also known as Mount Bryce. See the
> >>> + :doc:`../bbdevs/acc100` BBDEV guide for more details on this new
> driver.
> >>>
> >>> Removed Items
> >>> -------------
> >>> diff --git a/drivers/baseband/acc100/meson.build
> >>> b/drivers/baseband/acc100/meson.build
> >>> index 8afafc2..7ac44dc 100644
> >>> --- a/drivers/baseband/acc100/meson.build
> >>> +++ b/drivers/baseband/acc100/meson.build
> >>> @@ -4,3 +4,5 @@
> >>> deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci']
> >>>
> >>> sources = files('rte_acc100_pmd.c')
> >>> +
> >>> +install_headers('rte_acc100_cfg.h')
> >>> diff --git a/drivers/baseband/acc100/rte_acc100_cfg.h
> >>> b/drivers/baseband/acc100/rte_acc100_cfg.h
> >>> index 73bbe36..7f523bc 100644
> >>> --- a/drivers/baseband/acc100/rte_acc100_cfg.h
> >>> +++ b/drivers/baseband/acc100/rte_acc100_cfg.h
> >>> @@ -89,6 +89,23 @@ struct acc100_conf {
> >>> struct rte_arbitration_t arb_dl_5g[RTE_ACC100_NUM_VFS]; };
> >>>
> >>> +/**
> >>> + * Configure a ACC100 device
> >>> + *
> >>> + * @param dev_name
> >>> + * The name of the device. This is the short form of PCI BDF, e.g.
> 00:01.0.
> >>> + * It can also be retrieved for a bbdev device from the dev_name field
> in
> >> the
> >>> + * rte_bbdev_info structure returned by rte_bbdev_info_get().
> >>> + * @param conf
> >>> + * Configuration to apply to ACC100 HW.
> >>> + *
> >>> + * @return
> >>> + * Zero on success, negative value on failure.
> >>> + */
> >>> +__rte_experimental
> >>> +int
> >>> +acc100_configure(const char *dev_name, struct acc100_conf *conf);
> >>> +
> >>> #ifdef __cplusplus
> >>> }
> >>> #endif
> >>> diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c
> >>> b/drivers/baseband/acc100/rte_acc100_pmd.c
> >>> index 3589814..b50dd32 100644
> >>> --- a/drivers/baseband/acc100/rte_acc100_pmd.c
> >>> +++ b/drivers/baseband/acc100/rte_acc100_pmd.c
> >>> @@ -85,6 +85,26 @@
> >>>
> >>> enum {UL_4G = 0, UL_5G, DL_4G, DL_5G, NUM_ACC};
> >>>
> >>> +/* Return the accelerator enum for a Queue Group Index */ static
> >>> +inline int accFromQgid(int qg_idx, const struct acc100_conf
> >>> +*acc100_conf) {
> >>> + int accQg[ACC100_NUM_QGRPS];
> >>> + int NumQGroupsPerFn[NUM_ACC];
> >>> + int acc, qgIdx, qgIndex = 0;
> >>> + for (qgIdx = 0; qgIdx < ACC100_NUM_QGRPS; qgIdx++)
> >>> + accQg[qgIdx] = 0;
> >>> + NumQGroupsPerFn[UL_4G] = acc100_conf->q_ul_4g.num_qgroups;
> >>> + NumQGroupsPerFn[UL_5G] = acc100_conf->q_ul_5g.num_qgroups;
> >>> + NumQGroupsPerFn[DL_4G] = acc100_conf->q_dl_4g.num_qgroups;
> >>> + NumQGroupsPerFn[DL_5G] = acc100_conf->q_dl_5g.num_qgroups;
> >>> + for (acc = UL_4G; acc < NUM_ACC; acc++)
> >>> + for (qgIdx = 0; qgIdx < NumQGroupsPerFn[acc]; qgIdx++)
> >>> + accQg[qgIndex++] = acc;
> >> This looks inefficient, is there a way this could be calculated
> >> without filling arrays to
> >>
> >> access 1 value ?
> > That is not time critical, and the same common code is run each time.
> ok
> >
> >>> + acc = accQg[qg_idx];
> >>> + return acc;
> >>> +}
> >>> +
> >>> /* Return the queue topology for a Queue Group Index */ static
> >>> inline void qtopFromAcc(struct rte_q_topology_t **qtop, int
> >>> acc_enum, @@ -113,6 +133,30 @@
> >>> *qtop = p_qtop;
> >>> }
> >>>
> >>> +/* Return the AQ depth for a Queue Group Index */ static inline int
> >>> +aqDepth(int qg_idx, struct acc100_conf *acc100_conf) {
> >>> + struct rte_q_topology_t *q_top = NULL;
> >>> + int acc_enum = accFromQgid(qg_idx, acc100_conf);
> >>> + qtopFromAcc(&q_top, acc_enum, acc100_conf);
> >>> + if (unlikely(q_top == NULL))
> >>> + return 0;
> >> This error is not handled well be the callers.
> >>
> >> aqNum is similar.
> > This fails in a consistent basis, by having not queue available and handling
> this as the default case.
> ok
> >
> >>> + return q_top->aq_depth_log2;
> >>> +}
> >>> +
> >>> +/* Return the AQ depth for a Queue Group Index */ static inline int
> >>> +aqNum(int qg_idx, struct acc100_conf *acc100_conf) {
> >>> + struct rte_q_topology_t *q_top = NULL;
> >>> + int acc_enum = accFromQgid(qg_idx, acc100_conf);
> >>> + qtopFromAcc(&q_top, acc_enum, acc100_conf);
> >>> + if (unlikely(q_top == NULL))
> >>> + return 0;
> >>> + return q_top->num_aqs_per_groups;
> >>> +}
> >>> +
> >>> static void
> >>> initQTop(struct acc100_conf *acc100_conf) { @@ -4177,3 +4221,464
> >>> @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
> >>> RTE_PMD_REGISTER_PCI_TABLE(ACC100PF_DRIVER_NAME,
> >>> pci_id_acc100_pf_map);
> >> RTE_PMD_REGISTER_PCI(ACC100VF_DRIVER_NAME,
> >>> acc100_pci_vf_driver);
> >>> RTE_PMD_REGISTER_PCI_TABLE(ACC100VF_DRIVER_NAME,
> >>> pci_id_acc100_vf_map);
> >>> +
> >>> +/*
> >>> + * Implementation to fix the power on status of some 5GUL engines
> >>> + * This requires DMA permission if ported outside DPDK
> >> This sounds like a workaround, can more detail be added here ?
> > There are comments through the code I believe:
> > - /* Detect engines in undefined state */
> > - /* Force each engine which is in unspecified state */
> > - /* Reset LDPC Cores */
> > - /* Check engine power-on status again */ Do you believe this is not
> explicit enough. Power-on status may be in an undefined state hence this
> engine are avtivate with dummy payload to make sure they are in a
> predicable state once configuration is done.
>
> Yes, not explicit enough. They do not say it is a workaround so someone else
> would not know that
>
> this is needed or is likely needs adjusting in the future. Maybe change
>
> /* Check engine power-on status again */ to
>
> /*
>
> * Power-on status may be in an undefined state.
>
> * Active this engine with a dummy payload to make sure the state is
> defined.
>
> */
>
OK I will add a bit more in comments. Thanks
> Tom
>
> >>> + */
> >>> +static void
> >>> +poweron_cleanup(struct rte_bbdev *bbdev, struct acc100_device *d,
> >>> + struct acc100_conf *conf)
> >>> +{
> >>> + int i, template_idx, qg_idx;
> >>> + uint32_t address, status, payload;
> >>> + printf("Need to clear power-on 5GUL status in internal memory\n");
> >>> + /* Reset LDPC Cores */
> >>> + for (i = 0; i < ACC100_ENGINES_MAX; i++)
> >>> + acc100_reg_write(d, HWPfFecUl5gCntrlReg +
> >>> + ACC100_ENGINE_OFFSET * i,
> >> ACC100_RESET_HI);
> >>> + usleep(LONG_WAIT);
> >>> + for (i = 0; i < ACC100_ENGINES_MAX; i++)
> >>> + acc100_reg_write(d, HWPfFecUl5gCntrlReg +
> >>> + ACC100_ENGINE_OFFSET * i,
> >> ACC100_RESET_LO);
> >>> + usleep(LONG_WAIT);
> >>> + /* Prepare dummy workload */
> >>> + alloc_2x64mb_sw_rings_mem(bbdev, d, 0);
> >>> + /* Set base addresses */
> >>> + uint32_t phys_high = (uint32_t)(d->sw_rings_phys >> 32);
> >>> + uint32_t phys_low = (uint32_t)(d->sw_rings_phys &
> >>> + ~(ACC100_SIZE_64MBYTE-1));
> >>> + acc100_reg_write(d, HWPfDmaFec5GulDescBaseHiRegVf,
> >> phys_high);
> >>> + acc100_reg_write(d, HWPfDmaFec5GulDescBaseLoRegVf, phys_low);
> >>> +
> >>> + /* Descriptor for a dummy 5GUL code block processing*/
> >>> + union acc100_dma_desc *desc = NULL;
> >>> + desc = d->sw_rings;
> >>> + desc->req.data_ptrs[0].address = d->sw_rings_phys +
> >>> + ACC100_DESC_FCW_OFFSET;
> >>> + desc->req.data_ptrs[0].blen = ACC100_FCW_LD_BLEN;
> >>> + desc->req.data_ptrs[0].blkid = ACC100_DMA_BLKID_FCW;
> >>> + desc->req.data_ptrs[0].last = 0;
> >>> + desc->req.data_ptrs[0].dma_ext = 0;
> >>> + desc->req.data_ptrs[1].address = d->sw_rings_phys + 512;
> >>> + desc->req.data_ptrs[1].blkid = ACC100_DMA_BLKID_IN;
> >>> + desc->req.data_ptrs[1].last = 1;
> >>> + desc->req.data_ptrs[1].dma_ext = 0;
> >>> + desc->req.data_ptrs[1].blen = 44;
> >>> + desc->req.data_ptrs[2].address = d->sw_rings_phys + 1024;
> >>> + desc->req.data_ptrs[2].blkid = ACC100_DMA_BLKID_OUT_ENC;
> >>> + desc->req.data_ptrs[2].last = 1;
> >>> + desc->req.data_ptrs[2].dma_ext = 0;
> >>> + desc->req.data_ptrs[2].blen = 5;
> >>> + /* Dummy FCW */
> >>> + desc->req.fcw_ld.FCWversion = ACC100_FCW_VER;
> >>> + desc->req.fcw_ld.qm = 1;
> >>> + desc->req.fcw_ld.nfiller = 30;
> >>> + desc->req.fcw_ld.BG = 2 - 1;
> >>> + desc->req.fcw_ld.Zc = 7;
> >>> + desc->req.fcw_ld.ncb = 350;
> >>> + desc->req.fcw_ld.rm_e = 4;
> >>> + desc->req.fcw_ld.itmax = 10;
> >>> + desc->req.fcw_ld.gain_i = 1;
> >>> + desc->req.fcw_ld.gain_h = 1;
> >>> +
> >>> + int engines_to_restart[SIG_UL_5G_LAST + 1] = {0};
> >>> + int num_failed_engine = 0;
> >>> + /* Detect engines in undefined state */
> >>> + for (template_idx = SIG_UL_5G; template_idx <= SIG_UL_5G_LAST;
> >>> + template_idx++) {
> >>> + /* Check engine power-on status */
> >>> + address = HwPfFecUl5gIbDebugReg +
> >>> + ACC100_ENGINE_OFFSET * template_idx;
> >>> + status = (acc100_reg_read(d, address) >> 4) & 0xF;
> >>> + if (status == 0) {
> >>> + engines_to_restart[num_failed_engine] =
> >> template_idx;
> >>> + num_failed_engine++;
> >>> + }
> >>> + }
> >>> +
> >>> + int numQqsAcc = conf->q_ul_5g.num_qgroups;
> >>> + int numQgs = conf->q_ul_5g.num_qgroups;
> >>> + payload = 0;
> >>> + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> >> qg_idx++)
> >>> + payload |= (1 << qg_idx);
> >>> + /* Force each engine which is in unspecified state */
> >>> + for (i = 0; i < num_failed_engine; i++) {
> >>> + int failed_engine = engines_to_restart[i];
> >>> + printf("Force engine %d\n", failed_engine);
> >>> + for (template_idx = SIG_UL_5G; template_idx <=
> >> SIG_UL_5G_LAST;
> >>> + template_idx++) {
> >>> + address = HWPfQmgrGrpTmplateReg4Indx
> >>> + + BYTES_IN_WORD * template_idx;
> >>> + if (template_idx == failed_engine)
> >>> + acc100_reg_write(d, address, payload);
> >>> + else
> >>> + acc100_reg_write(d, address, 0);
> >>> + }
> >>> + /* Reset descriptor header */
> >>> + desc->req.word0 = ACC100_DMA_DESC_TYPE;
> >>> + desc->req.word1 = 0;
> >>> + desc->req.word2 = 0;
> >>> + desc->req.word3 = 0;
> >>> + desc->req.numCBs = 1;
> >>> + desc->req.m2dlen = 2;
> >>> + desc->req.d2mlen = 1;
> >>> + /* Enqueue the code block for processing */
> >>> + union acc100_enqueue_reg_fmt enq_req;
> >>> + enq_req.val = 0;
> >>> + enq_req.addr_offset = ACC100_DESC_OFFSET;
> >>> + enq_req.num_elem = 1;
> >>> + enq_req.req_elem_addr = 0;
> >>> + rte_wmb();
> >>> + acc100_reg_write(d, HWPfQmgrIngressAq + 0x100,
> >> enq_req.val);
> >>> + usleep(LONG_WAIT * 100);
> >>> + if (desc->req.word0 != 2)
> >>> + printf("DMA Response %#"PRIx32"\n", desc-
> >>> req.word0);
> >>> + }
> >>> +
> >>> + /* Reset LDPC Cores */
> >>> + for (i = 0; i < ACC100_ENGINES_MAX; i++)
> >>> + acc100_reg_write(d, HWPfFecUl5gCntrlReg +
> >>> + ACC100_ENGINE_OFFSET * i,
> >> ACC100_RESET_HI);
> >>> + usleep(LONG_WAIT);
> >>> + for (i = 0; i < ACC100_ENGINES_MAX; i++)
> >>> + acc100_reg_write(d, HWPfFecUl5gCntrlReg +
> >>> + ACC100_ENGINE_OFFSET * i,
> >> ACC100_RESET_LO);
> >>> + usleep(LONG_WAIT);
> >>> + acc100_reg_write(d, HWPfHi5GHardResetReg,
> >> ACC100_RESET_HARD);
> >>> + usleep(LONG_WAIT);
> >>> + int numEngines = 0;
> >>> + /* Check engine power-on status again */
> >>> + for (template_idx = SIG_UL_5G; template_idx <= SIG_UL_5G_LAST;
> >>> + template_idx++) {
> >>> + address = HwPfFecUl5gIbDebugReg +
> >>> + ACC100_ENGINE_OFFSET * template_idx;
> >>> + status = (acc100_reg_read(d, address) >> 4) & 0xF;
> >>> + address = HWPfQmgrGrpTmplateReg4Indx
> >>> + + BYTES_IN_WORD * template_idx;
> >>> + if (status == 1) {
> >>> + acc100_reg_write(d, address, payload);
> >>> + numEngines++;
> >>> + } else
> >>> + acc100_reg_write(d, address, 0);
> >>> + }
> >>> + printf("Number of 5GUL engines %d\n", numEngines);
> >>> +
> >>> + if (d->sw_rings_base != NULL)
> >>> + rte_free(d->sw_rings_base);
> >>> + usleep(LONG_WAIT);
> >>> +}
> >>> +
> >>> +/* Initial configuration of a ACC100 device prior to running
> >>> +configure() */ int acc100_configure(const char *dev_name, struct
> >>> +acc100_conf *conf) {
> >>> + rte_bbdev_log(INFO, "acc100_configure");
> >>> + uint32_t payload, address, status;
> >> maybe value or data would be a better variable name than payload.
> >>
> >> would mean changing acc100_reg_write
> > transparent to me, but can change given DPDK uses term value.
> >
> >
> >>> + int qg_idx, template_idx, vf_idx, acc, i;
> >>> + struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
> >>> +
> >>> + /* Compile time checks */
> >>> + RTE_BUILD_BUG_ON(sizeof(struct acc100_dma_req_desc) != 256);
> >>> + RTE_BUILD_BUG_ON(sizeof(union acc100_dma_desc) != 256);
> >>> + RTE_BUILD_BUG_ON(sizeof(struct acc100_fcw_td) != 24);
> >>> + RTE_BUILD_BUG_ON(sizeof(struct acc100_fcw_te) != 32);
> >>> +
> >>> + if (bbdev == NULL) {
> >>> + rte_bbdev_log(ERR,
> >>> + "Invalid dev_name (%s), or device is not yet initialised",
> >>> + dev_name);
> >>> + return -ENODEV;
> >>> + }
> >>> + struct acc100_device *d = bbdev->data->dev_private;
> >>> +
> >>> + /* Store configuration */
> >>> + rte_memcpy(&d->acc100_conf, conf, sizeof(d->acc100_conf));
> >>> +
> >>> + /* PCIe Bridge configuration */
> >>> + acc100_reg_write(d, HwPfPcieGpexBridgeControl,
> >> ACC100_CFG_PCI_BRIDGE);
> >>> + for (i = 1; i < 17; i++)
> >> 17 is a magic number, use a #define
> >>
> >> this is a general issue.
> > These are only used once but still agreed.
> >
> >>> + acc100_reg_write(d,
> >>> +
> >> HwPfPcieGpexAxiAddrMappingWindowPexBaseHigh
> >>> + + i * 16, 0);
> >>> +
> >>> + /* PCIe Link Trainiing and Status State Machine */
> >>> + acc100_reg_write(d, HwPfPcieGpexLtssmStateCntrl, 0xDFC00000);
> >>> +
> >>> + /* Prevent blocking AXI read on BRESP for AXI Write */
> >>> + address = HwPfPcieGpexAxiPioControl;
> >>> + payload = ACC100_CFG_PCI_AXI;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* 5GDL PLL phase shift */
> >>> + acc100_reg_write(d, HWPfChaDl5gPllPhshft0, 0x1);
> >>> +
> >>> + /* Explicitly releasing AXI as this may be stopped after PF FLR/BME */
> >>> + address = HWPfDmaAxiControl;
> >>> + payload = 1;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* DDR Configuration */
> >>> + address = HWPfDdrBcTim6;
> >>> + payload = acc100_reg_read(d, address);
> >>> + payload &= 0xFFFFFFFB; /* Bit 2 */ #ifdef ACC100_DDR_ECC_ENABLE
> >>> + payload |= 0x4;
> >>> +#endif
> >>> + acc100_reg_write(d, address, payload);
> >>> + address = HWPfDdrPhyDqsCountNum;
> >>> +#ifdef ACC100_DDR_ECC_ENABLE
> >>> + payload = 9;
> >>> +#else
> >>> + payload = 8;
> >>> +#endif
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* Set default descriptor signature */
> >>> + address = HWPfDmaDescriptorSignatuture;
> >>> + payload = 0;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* Enable the Error Detection in DMA */
> >>> + payload = ACC100_CFG_DMA_ERROR;
> >>> + address = HWPfDmaErrorDetectionEn;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* AXI Cache configuration */
> >>> + payload = ACC100_CFG_AXI_CACHE;
> >>> + address = HWPfDmaAxcacheReg;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* Default DMA Configuration (Qmgr Enabled) */
> >>> + address = HWPfDmaConfig0Reg;
> >>> + payload = 0;
> >>> + acc100_reg_write(d, address, payload);
> >>> + address = HWPfDmaQmanen;
> >>> + payload = 0;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* Default RLIM/ALEN configuration */
> >>> + address = HWPfDmaConfig1Reg;
> >>> + payload = (1 << 31) + (23 << 8) + (1 << 6) + 7;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* Configure DMA Qmanager addresses */
> >>> + address = HWPfDmaQmgrAddrReg;
> >>> + payload = HWPfQmgrEgressQueuesTemplate;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* ===== Qmgr Configuration ===== */
> >>> + /* Configuration of the AQueue Depth QMGR_GRP_0_DEPTH_LOG2
> >> for UL */
> >>> + int totalQgs = conf->q_ul_4g.num_qgroups +
> >>> + conf->q_ul_5g.num_qgroups +
> >>> + conf->q_dl_4g.num_qgroups +
> >>> + conf->q_dl_5g.num_qgroups;
> >>> + for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
> >>> + address = HWPfQmgrDepthLog2Grp +
> >>> + BYTES_IN_WORD * qg_idx;
> >>> + payload = aqDepth(qg_idx, conf);
> >>> + acc100_reg_write(d, address, payload);
> >>> + address = HWPfQmgrTholdGrp +
> >>> + BYTES_IN_WORD * qg_idx;
> >>> + payload = (1 << 16) + (1 << (aqDepth(qg_idx, conf) - 1));
> >>> + acc100_reg_write(d, address, payload);
> >>> + }
> >>> +
> >>> + /* Template Priority in incremental order */
> >>> + for (template_idx = 0; template_idx < ACC100_NUM_TMPL;
> >>> + template_idx++) {
> >>> + address = HWPfQmgrGrpTmplateReg0Indx +
> >>> + BYTES_IN_WORD * (template_idx % 8);
> >>> + payload = TMPL_PRI_0;
> >>> + acc100_reg_write(d, address, payload);
> >>> + address = HWPfQmgrGrpTmplateReg1Indx +
> >>> + BYTES_IN_WORD * (template_idx % 8);
> >>> + payload = TMPL_PRI_1;
> >>> + acc100_reg_write(d, address, payload);
> >>> + address = HWPfQmgrGrpTmplateReg2indx +
> >>> + BYTES_IN_WORD * (template_idx % 8);
> >>> + payload = TMPL_PRI_2;
> >>> + acc100_reg_write(d, address, payload);
> >>> + address = HWPfQmgrGrpTmplateReg3Indx +
> >>> + BYTES_IN_WORD * (template_idx % 8);
> >>> + payload = TMPL_PRI_3;
> >>> + acc100_reg_write(d, address, payload);
> >>> + }
> >>> +
> >>> + address = HWPfQmgrGrpPriority;
> >>> + payload = ACC100_CFG_QMGR_HI_P;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* Template Configuration */
> >>> + for (template_idx = 0; template_idx < ACC100_NUM_TMPL;
> >> template_idx++) {
> >>> + payload = 0;
> >>> + address = HWPfQmgrGrpTmplateReg4Indx
> >>> + + BYTES_IN_WORD * template_idx;
> >>> + acc100_reg_write(d, address, payload);
> >>> + }
> >>> + /* 4GUL */
> >>> + int numQgs = conf->q_ul_4g.num_qgroups;
> >>> + int numQqsAcc = 0;
> >>> + payload = 0;
> >>> + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> >> qg_idx++)
> >>> + payload |= (1 << qg_idx);
> >>> + for (template_idx = SIG_UL_4G; template_idx <= SIG_UL_4G_LAST;
> >>> + template_idx++) {
> >>> + address = HWPfQmgrGrpTmplateReg4Indx
> >>> + + BYTES_IN_WORD*template_idx;
> >>> + acc100_reg_write(d, address, payload);
> >>> + }
> >>> + /* 5GUL */
> >>> + numQqsAcc += numQgs;
> >>> + numQgs = conf->q_ul_5g.num_qgroups;
> >>> + payload = 0;
> >>> + int numEngines = 0;
> >>> + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> >> qg_idx++)
> >>> + payload |= (1 << qg_idx);
> >>> + for (template_idx = SIG_UL_5G; template_idx <= SIG_UL_5G_LAST;
> >>> + template_idx++) {
> >>> + /* Check engine power-on status */
> >>> + address = HwPfFecUl5gIbDebugReg +
> >>> + ACC100_ENGINE_OFFSET * template_idx;
> >>> + status = (acc100_reg_read(d, address) >> 4) & 0xF;
> >>> + address = HWPfQmgrGrpTmplateReg4Indx
> >>> + + BYTES_IN_WORD * template_idx;
> >>> + if (status == 1) {
> >>> + acc100_reg_write(d, address, payload);
> >>> + numEngines++;
> >>> + } else
> >>> + acc100_reg_write(d, address, 0);
> >>> + #if RTE_ACC100_SINGLE_FEC == 1
> >> #if should be at start of line
> > ok
> >
> >>> + payload = 0;
> >>> + #endif
> >>> + }
> >>> + printf("Number of 5GUL engines %d\n", numEngines);
> >>> + /* 4GDL */
> >>> + numQqsAcc += numQgs;
> >>> + numQgs = conf->q_dl_4g.num_qgroups;
> >>> + payload = 0;
> >>> + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> >> qg_idx++)
> >>> + payload |= (1 << qg_idx);
> >>> + for (template_idx = SIG_DL_4G; template_idx <= SIG_DL_4G_LAST;
> >>> + template_idx++) {
> >>> + address = HWPfQmgrGrpTmplateReg4Indx
> >>> + + BYTES_IN_WORD*template_idx;
> >>> + acc100_reg_write(d, address, payload);
> >>> + #if RTE_ACC100_SINGLE_FEC == 1
> >>> + payload = 0;
> >>> + #endif
> >>> + }
> >>> + /* 5GDL */
> >>> + numQqsAcc += numQgs;
> >>> + numQgs = conf->q_dl_5g.num_qgroups;
> >>> + payload = 0;
> >>> + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc);
> >> qg_idx++)
> >>> + payload |= (1 << qg_idx);
> >>> + for (template_idx = SIG_DL_5G; template_idx <= SIG_DL_5G_LAST;
> >>> + template_idx++) {
> >>> + address = HWPfQmgrGrpTmplateReg4Indx
> >>> + + BYTES_IN_WORD*template_idx;
> >>> + acc100_reg_write(d, address, payload);
> >>> + #if RTE_ACC100_SINGLE_FEC == 1
> >>> + payload = 0;
> >>> + #endif
> >>> + }
> >>> +
> >>> + /* Queue Group Function mapping */
> >>> + int qman_func_id[5] = {0, 2, 1, 3, 4};
> >>> + address = HWPfQmgrGrpFunction0;
> >>> + payload = 0;
> >>> + for (qg_idx = 0; qg_idx < 8; qg_idx++) {
> >>> + acc = accFromQgid(qg_idx, conf);
> >>> + payload |= qman_func_id[acc]<<(qg_idx * 4);
> >>> + }
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* Configuration of the Arbitration QGroup depth to 1 */
> >>> + for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
> >>> + address = HWPfQmgrArbQDepthGrp +
> >>> + BYTES_IN_WORD * qg_idx;
> >>> + payload = 0;
> >>> + acc100_reg_write(d, address, payload);
> >>> + }
> >>> +
> >>> + /* Enabling AQueues through the Queue hierarchy*/
> >>> + for (vf_idx = 0; vf_idx < ACC100_NUM_VFS; vf_idx++) {
> >>> + for (qg_idx = 0; qg_idx < ACC100_NUM_QGRPS; qg_idx++) {
> >>> + payload = 0;
> >>> + if (vf_idx < conf->num_vf_bundles &&
> >>> + qg_idx < totalQgs)
> >>> + payload = (1 << aqNum(qg_idx, conf)) - 1;
> >>> + address = HWPfQmgrAqEnableVf
> >>> + + vf_idx * BYTES_IN_WORD;
> >>> + payload += (qg_idx << 16);
> >>> + acc100_reg_write(d, address, payload);
> >>> + }
> >>> + }
> >>> +
> >>> + /* This pointer to ARAM (256kB) is shifted by 2 (4B per register) */
> >>> + uint32_t aram_address = 0;
> >>> + for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
> >>> + for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
> >>> + address = HWPfQmgrVfBaseAddr + vf_idx
> >>> + * BYTES_IN_WORD + qg_idx
> >>> + * BYTES_IN_WORD * 64;
> >>> + payload = aram_address;
> >>> + acc100_reg_write(d, address, payload);
> >>> + /* Offset ARAM Address for next memory bank
> >>> + * - increment of 4B
> >>> + */
> >>> + aram_address += aqNum(qg_idx, conf) *
> >>> + (1 << aqDepth(qg_idx, conf));
> >>> + }
> >>> + }
> >>> +
> >>> + if (aram_address > WORDS_IN_ARAM_SIZE) {
> >>> + rte_bbdev_log(ERR, "ARAM Configuration not fitting %d
> >> %d\n",
> >>> + aram_address, WORDS_IN_ARAM_SIZE);
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + /* ==== HI Configuration ==== */
> >>> +
> >>> + /* Prevent Block on Transmit Error */
> >>> + address = HWPfHiBlockTransmitOnErrorEn;
> >>> + payload = 0;
> >>> + acc100_reg_write(d, address, payload);
> >>> + /* Prevents to drop MSI */
> >>> + address = HWPfHiMsiDropEnableReg;
> >>> + payload = 0;
> >>> + acc100_reg_write(d, address, payload);
> >>> + /* Set the PF Mode register */
> >>> + address = HWPfHiPfMode;
> >>> + payload = (conf->pf_mode_en) ? 2 : 0;
> >>> + acc100_reg_write(d, address, payload);
> >>> + /* Enable Error Detection in HW */
> >>> + address = HWPfDmaErrorDetectionEn;
> >>> + payload = 0x3D7;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* QoS overflow init */
> >>> + payload = 1;
> >>> + address = HWPfQosmonAEvalOverflow0;
> >>> + acc100_reg_write(d, address, payload);
> >>> + address = HWPfQosmonBEvalOverflow0;
> >>> + acc100_reg_write(d, address, payload);
> >>> +
> >>> + /* HARQ DDR Configuration */
> >>> + unsigned int ddrSizeInMb = 512; /* Fixed to 512 MB per VF for now
> >> */
> >>> + for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
> >>> + address = HWPfDmaVfDdrBaseRw + vf_idx
> >>> + * 0x10;
> >>> + payload = ((vf_idx * (ddrSizeInMb / 64)) << 16) +
> >>> + (ddrSizeInMb - 1);
> >>> + acc100_reg_write(d, address, payload);
> >>> + }
> >>> + usleep(LONG_WAIT);
> >> Is sleep needed here ? the reg_write has one.
> > This one is needed on top
> >
> >>> +
> >> Since this seems like a workaround, add a comment here.
> > fair enough, ok, thanks
> >
> >> Tom
> >>
> >>> + if (numEngines < (SIG_UL_5G_LAST + 1))
> >>> + poweron_cleanup(bbdev, d, conf);
> >>> +
> >>> + rte_bbdev_log_debug("PF Tip configuration complete for %s",
> >> dev_name);
> >>> + return 0;
> >>> +}
> >>> diff --git
> >>> a/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
> >>> b/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
> >>> index 4a76d1d..91c234d 100644
> >>> --- a/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
> >>> +++ b/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
> >>> @@ -1,3 +1,10 @@
> >>> DPDK_21 {
> >>> local: *;
> >>> };
> >>> +
> >>> +EXPERIMENTAL {
> >>> + global:
> >>> +
> >>> + acc100_configure;
> >>> +
> >>> +};
More information about the dev
mailing list