[dpdk-dev] [PATCH V16 1/3] ethdev: introduce FEC API

Min Hu (Connor) humin29 at huawei.com
Thu Oct 8 12:02:54 CEST 2020


This patch adds Forward error correction(FEC) support for ethdev.
Introduce APIs which support query and config FEC information in
hardware.

Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei at huawei.com>
Reviewed-by: Chengwen Feng <fengchengwen at huawei.com>
Reviewed-by: Chengchang Tang <tangchengchang at huawei.com>
Acked-by: Andrew Rybchenko <arybchenko at solarflare.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde at broadcom.com>
---
v14->v15:
change mode to fec_capa in fec set API.

---
v13->v14:
change mode to fec_capa.
fix comment about API.

---
v12->v13:
change fec get capa API.
fix comment styles.

---
v10->v11:
allow to report capabilities per link speed.
specify what should be reported if link is down
when get FEC.
change mode to capa bitmask.

---
v9->v10:
add macro RTE_ETH_FEC_MODE_CAPA_MASK(x) to indicate
different FEC mode capa.

---
v8->v9:
added reviewed-by and acked-by.

---
v7->v8:
put AUTO just after NOFEC in rte_fec_mode definition.

---
v6->v7:
deleted RTE_ETH_FEC_NUM to prevent ABI breakage.
add new macro to indicate translation from fec mode
to capa.

---
v5->v6:
modified release notes.
deleted check duplicated for FEC API
fixed code styles according to DPDK coding style.
added _eth prefix.

---
v4->v5:
Modifies FEC capa definitions using macros.
Add RTE_ prefix for public FEC mode enum.
add release notes about FEC for dpdk20_11.

---
v2->v3:
add function return value "-ENOTSUP" for API.

---
 doc/guides/rel_notes/release_20_11.rst   |   5 ++
 lib/librte_ethdev/rte_ethdev.c           |  44 +++++++++++++
 lib/librte_ethdev/rte_ethdev.h           | 105 +++++++++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_driver.h    |  88 ++++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_version.map |   3 +
 5 files changed, 245 insertions(+)

diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
index c6642f5..1f04bd5 100644
--- a/doc/guides/rel_notes/release_20_11.rst
+++ b/doc/guides/rel_notes/release_20_11.rst
@@ -78,6 +78,11 @@ New Features
     ``--portmask=N``
     where N represents the hexadecimal bitmask of ports used.
 
+* **Added the FEC API, for a generic FEC query and config.**
+
+  Added the FEC API which provides functions for query FEC capabilities and
+  current FEC mode from device. Also, API for configuring FEC mode is also provided.
+
 
 Removed Items
 -------------
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index dfe5c1b..ca596c1 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -3679,6 +3679,50 @@ rte_eth_led_off(uint16_t port_id)
 	return eth_err(port_id, (*dev->dev_ops->dev_led_off)(dev));
 }
 
+int
+rte_eth_fec_get_capability(uint16_t port_id,
+			   struct rte_eth_fec_capa *speed_fec_capa,
+			   unsigned int num)
+{
+	struct rte_eth_dev *dev;
+	int ret;
+
+	if (speed_fec_capa == NULL && num > 0)
+		return -EINVAL;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get_capability, -ENOTSUP);
+	ret = (*dev->dev_ops->fec_get_capability)(dev, speed_fec_capa, num);
+
+	return ret;
+}
+
+int
+rte_eth_fec_get(uint16_t port_id, uint32_t *fec_capa)
+{
+	struct rte_eth_dev *dev;
+
+	if (fec_capa == NULL)
+		return -EINVAL;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get, -ENOTSUP);
+	return eth_err(port_id, (*dev->dev_ops->fec_get)(dev, fec_capa));
+}
+
+int
+rte_eth_fec_set(uint16_t port_id, uint32_t fec_capa)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_set, -ENOTSUP);
+	return eth_err(port_id, (*dev->dev_ops->fec_set)(dev, fec_capa));
+}
+
 /*
  * Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
  * an empty spot.
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 645a186..7938202 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -1544,6 +1544,29 @@ struct rte_eth_dcb_info {
 	struct rte_eth_dcb_tc_queue_mapping tc_queue;
 };
 
+/**
+ * This enum indicates the possible Forward Error Correction (FEC) modes
+ * of an ethdev port.
+ */
+enum rte_eth_fec_mode {
+	RTE_ETH_FEC_NOFEC = 0,      /**< FEC is off */
+	RTE_ETH_FEC_AUTO,	    /**< FEC autonegotiation modes */
+	RTE_ETH_FEC_BASER,          /**< FEC using common algorithm */
+	RTE_ETH_FEC_RS,             /**< FEC using RS algorithm */
+};
+
+/* Translate from FEC mode to FEC capa */
+#define RTE_ETH_FEC_MODE_TO_CAPA(x)	(1U << (x))
+
+/* This macro indicates FEC capa mask */
+#define RTE_ETH_FEC_MODE_CAPA_MASK(x)	(1U << (RTE_ETH_FEC_ ## x))
+
+/* A structure used to get capabilities per link speed */
+struct rte_eth_fec_capa {
+	uint32_t speed; /**< Link speed (see ETH_SPEED_NUM_*) */
+	uint32_t capa;  /**< FEC capabilities bitmask */
+};
+
 #define RTE_ETH_ALL RTE_MAX_ETHPORTS
 
 /* Macros to check for valid port */
@@ -3397,6 +3420,88 @@ int  rte_eth_led_on(uint16_t port_id);
 int  rte_eth_led_off(uint16_t port_id);
 
 /**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get Forward Error Correction(FEC) capability.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param speed_fec_capa
+ *   speed_fec_capa is out only with per-speed capabilities.
+ *   If set to NULL, the function returns the required number
+ *   of required array entries.
+ * @param num
+ *   a number of elements in an speed_fec_capa array.
+ *
+ * @return
+ *   - A non-negative value lower or equal to num: success. The return value
+ *     is the number of entries filled in the fec capa array.
+ *   - A non-negative value higher than num: error, the given fec capa array
+ *     is too small. The return value corresponds to the num that should
+ *     be given to succeed. The entries in fec capa array are not valid and
+ *     shall not be used by the caller.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ *     that operation.
+ *   - (-EIO) if device is removed.
+ *   - (-ENODEV)  if *port_id* invalid.
+ *   - (-EINVAL)  if *num* or *speed_fec_capa* invalid
+ */
+__rte_experimental
+int rte_eth_fec_get_capability(uint16_t port_id,
+			       struct rte_eth_fec_capa *speed_fec_capa,
+			       unsigned int num);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get current Forward Error Correction(FEC) mode.
+ * If link is down and AUTO is enabled, AUTO is returned, otherwise,
+ * configured FEC mode is returned.
+ * If link is up, current FEC mode is returned.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param fec_capa
+ *   A bitmask of enabled FEC modes. If AUTO bit is set, other
+ *   bits specify FEC modes which may be negotiated. If AUTO
+ *   bit is clear, specify FEC modes to be used (only one valid
+ *   mode per speed may be set).
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ *     that operation.
+ *   - (-EIO) if device is removed.
+ *   - (-ENODEV)  if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_get(uint16_t port_id, uint32_t *fec_capa);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Set Forward Error Correction(FEC) mode.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param fec_capa
+ *   A bitmask of allowed FEC modes. If AUTO bit is set, other
+ *   bits specify FEC modes which may be negotiated. If AUTO
+ *   bit is clear, specify FEC modes to be used (only one valid
+ *   mode per speed may be set).
+ * @return
+ *   - (0) if successful.
+ *   - (-EINVAL) if the FEC mode is not valid.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ *   - (-EIO) if device is removed.
+ *   - (-ENODEV)  if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_set(uint16_t port_id, uint32_t fec_capa);
+
+/**
  * Get current status of the Ethernet link flow control for Ethernet device
  *
  * @param port_id
diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
index 23cc1e0..f147a67 100644
--- a/lib/librte_ethdev/rte_ethdev_driver.h
+++ b/lib/librte_ethdev/rte_ethdev_driver.h
@@ -575,6 +575,87 @@ typedef int (*eth_tx_hairpin_queue_setup_t)
 	 const struct rte_eth_hairpin_conf *hairpin_conf);
 
 /**
+ * @internal
+ * Get Forward Error Correction(FEC) capability.
+ *
+ * @param dev
+ *   ethdev handle of port.
+ * @param speed_fec_capa
+ *   speed_fec_capa is out only with per-speed capabilities.
+ * @param num
+ *   a number of elements in an speed_fec_capa array.
+ *
+ * @return
+ *   Negative errno value on error, positive value on success.
+ *
+ * @retval positive value
+ *   A non-negative value lower or equal to num: success. The return value
+ *   is the number of entries filled in the fec capa array.
+ *   A non-negative value higher than num: error, the given fec capa array
+ *   is too small. The return value corresponds to the num that should
+ *   be given to succeed. The entries in the fec capa array are not valid
+ *   and shall not be used by the caller.
+ * @retval -ENOTSUP
+ *   Operation is not supported.
+ * @retval -EIO
+ *   Device is removed.
+ * @retval -EINVAL
+ *   *num* or *speed_fec_capa* invalid.
+ */
+typedef int (*eth_fec_get_capability_t)(struct rte_eth_dev *dev,
+		struct rte_eth_fec_capa *speed_fec_capa, unsigned int num);
+
+/**
+ * @internal
+ * Get Forward Error Correction(FEC) mode.
+ *
+ * @param dev
+ *   ethdev handle of port.
+ * @param fec_capa
+ *   a bitmask of enabled FEC modes. If AUTO bit is set, other
+ *   bits specify FEC modes which may be negotiated. If AUTO
+ *   bit is clear, specify FEC modes to be used (only one valid
+ *   mode per speed may be set).
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ *   Success, get FEC success.
+ * @retval -ENOTSUP
+ *   Operation is not supported.
+ * @retval -EIO
+ *   Device is removed.
+ */
+typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev,
+			     uint32_t *fec_capa);
+
+/**
+ * @internal
+ * Set Forward Error Correction(FEC) mode.
+ *
+ * @param dev
+ *   ethdev handle of port.
+ * @param fec_capa
+ *   bitmask of allowed FEC modes. It must be only one
+ *   if AUTO is disabled. If AUTO is enabled, other
+ *   bits specify FEC modes which may be negotiated.
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ *   Success, set FEC success.
+ * @retval -ENOTSUP
+ *   Operation is not supported.
+ * @retval -EINVAL
+ *   Unsupported FEC mode requested.
+ * @retval -EIO
+ *   Device is removed.
+ */
+typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, uint32_t fec_capa);
+
+/**
  * @internal A structure containing the functions exported by an Ethernet driver.
  */
 struct eth_dev_ops {
@@ -713,6 +794,13 @@ struct eth_dev_ops {
 	/**< Set up device RX hairpin queue. */
 	eth_tx_hairpin_queue_setup_t tx_hairpin_queue_setup;
 	/**< Set up device TX hairpin queue. */
+
+	eth_fec_get_capability_t fec_get_capability;
+	/**< Get Forward Error Correction(FEC) capability. */
+	eth_fec_get_t fec_get;
+	/**< Get Forward Error Correction(FEC) mode. */
+	eth_fec_set_t fec_set;
+	/**< Set Forward Error Correction(FEC) mode. */
 };
 
 /**
diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
index c95ef51..b9ace3a 100644
--- a/lib/librte_ethdev/rte_ethdev_version.map
+++ b/lib/librte_ethdev/rte_ethdev_version.map
@@ -229,6 +229,9 @@ EXPERIMENTAL {
 	# added in 20.11
 	rte_eth_link_speed_to_str;
 	rte_eth_link_to_str;
+	rte_eth_fec_get_capability;
+	rte_eth_fec_get;
+	rte_eth_fec_set;
 };
 
 INTERNAL {
-- 
2.7.4



More information about the dev mailing list