[dpdk-dev] [PATCH v3 2/6] ethdev: add new attributes to hairpin config

[Bing Zhao]

To support two ports hairpin mode and keep the backward compatibility
for the application, two new attribute members of hairpin queue
configuration structure are added.

`tx_explicit` means if the application itself will insert the TX part
flow rules. If not set, PMD will insert the rules implicitly.
`manual_bind` means if the hairpin TX queue and peer RX queue will be
bound automatically during device start stage.

Different TX and RX queue pairs could have different values, but it
is highly recommended that all paired queues between one egress and
its peer ingress ports have the same values, in order not to bring
any chaos to the system. The actual support of these attribute
parameters will be checked and decided by the PMD drivers.

In a single port hairpin, if both are zero without any setting, the
behavior will remain the same as before. It means no bind API needs
to be called and no TX flow rules need to be inserted manually by
the application.

Signed-off-by: Bing Zhao <bingz at nvidia.com>
Acked-by: Ori Kam <orika at nvidia.com>
---
v2: optimize the structure and remove unused macros
---
 lib/librte_ethdev/rte_ethdev.c | 8 ++++----
 lib/librte_ethdev/rte_ethdev.h | 5 ++++-
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 85a19bd..a4adeff 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -1954,13 +1954,13 @@ struct rte_eth_dev *
 	}
 	if (conf->peer_count > cap.max_rx_2_tx) {
 		RTE_ETHDEV_LOG(ERR,
-			"Invalid value for number of peers for Rx queue(=%hu), should be: <= %hu",
+			"Invalid value for number of peers for Rx queue(=%u), should be: <= %hu",
 			conf->peer_count, cap.max_rx_2_tx);
 		return -EINVAL;
 	}
 	if (conf->peer_count == 0) {
 		RTE_ETHDEV_LOG(ERR,
-			"Invalid value for number of peers for Rx queue(=%hu), should be: > 0",
+			"Invalid value for number of peers for Rx queue(=%u), should be: > 0",
 			conf->peer_count);
 		return -EINVAL;
 	}
@@ -2125,13 +2125,13 @@ struct rte_eth_dev *
 	}
 	if (conf->peer_count > cap.max_tx_2_rx) {
 		RTE_ETHDEV_LOG(ERR,
-			"Invalid value for number of peers for Tx queue(=%hu), should be: <= %hu",
+			"Invalid value for number of peers for Tx queue(=%u), should be: <= %hu",
 			conf->peer_count, cap.max_tx_2_rx);
 		return -EINVAL;
 	}
 	if (conf->peer_count == 0) {
 		RTE_ETHDEV_LOG(ERR,
-			"Invalid value for number of peers for Tx queue(=%hu), should be: > 0",
+			"Invalid value for number of peers for Tx queue(=%u), should be: > 0",
 			conf->peer_count);
 		return -EINVAL;
 	}
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 6206643..94a981c 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -1045,7 +1045,10 @@ struct rte_eth_hairpin_peer {
  * A structure used to configure hairpin binding.
  */
 struct rte_eth_hairpin_conf {
-	uint16_t peer_count; /**< The number of peers. */
+	uint32_t peer_count:16; /**< The number of peers. */
+	uint32_t tx_explicit:1; /**< Explicit TX flow rule mode. */
+	uint32_t manual_bind:1; /**< Manually bind hairpin queues. */
+	uint32_t reserved:14; /**< Reserved bits. */
 	struct rte_eth_hairpin_peer peers[RTE_ETH_MAX_HAIRPIN_PEERS];
 };
 
-- 
1.8.3.1