[dpdk-dev] [PATCH v3 11/18] net/ixgbe: add checks for max SIMD bitwidth

[Wang, Haiyue]

> -----Original Message-----
> From: Ananyev, Konstantin <konstantin.ananyev at intel.com>
> Sent: Monday, October 12, 2020 06:31
> To: Wang, Haiyue <haiyue.wang at intel.com>; Power, Ciara <ciara.power at intel.com>; dev at dpdk.org
> Cc: Zhao1, Wei <wei.zhao1 at intel.com>; Guo, Jia <jia.guo at intel.com>
> Subject: RE: [PATCH v3 11/18] net/ixgbe: add checks for max SIMD bitwidth
> 
> 
> 
> > > From: Power, Ciara <ciara.power at intel.com>
> > > Sent: Wednesday, September 30, 2020 21:04
> > > To: dev at dpdk.org
> > > Cc: Power, Ciara <ciara.power at intel.com>; Zhao1, Wei <wei.zhao1 at intel.com>; Guo, Jia
> > > <jia.guo at intel.com>; Wang, Haiyue <haiyue.wang at intel.com>
> > > Subject: [PATCH v3 11/18] net/ixgbe: add checks for max SIMD bitwidth
> > >
> > > When choosing a vector path to take, an extra condition must be
> > > satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
> > > path.
> > >
> > > Cc: Wei Zhao <wei.zhao1 at intel.com>
> > > Cc: Jeff Guo <jia.guo at intel.com>
> > >
> > > Signed-off-by: Ciara Power <ciara.power at intel.com>
> > > ---
> > >  drivers/net/ixgbe/ixgbe_rxtx.c | 7 +++++--
> > >  1 file changed, 5 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
> > > index 977ecf5137..eadc7183f2 100644
> > > --- a/drivers/net/ixgbe/ixgbe_rxtx.c
> > > +++ b/drivers/net/ixgbe/ixgbe_rxtx.c
> > > @@ -2503,7 +2503,9 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq)
> > >  		dev->tx_pkt_prepare = NULL;
> > >  		if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
> > >  				(rte_eal_process_type() != RTE_PROC_PRIMARY ||
> > > -					ixgbe_txq_vec_setup(txq) == 0)) {
> > > +					ixgbe_txq_vec_setup(txq) == 0) &&
> > > +				rte_get_max_simd_bitwidth()
> >
> > As Konstantin mentioned: " I think it is a bit safer to do all checks first before
> >  doing txq_vec_setup()."
> >
> > Fox x86 & arm platforms, the setup is always 0, since 'sw_ring_v' is union with
> > 'sw_ring' which is initialize at 'ixgbe_dev_tx_queue_setup'.
> >
> > 	union {
> > 		struct ixgbe_tx_entry *sw_ring; /**< address of SW ring for scalar PMD. */
> > 		struct ixgbe_tx_entry_v *sw_ring_v; /**< address of SW ring for vector PMD */
> > 	};
> >
> > static inline int
> > ixgbe_txq_vec_setup_default(struct ixgbe_tx_queue *txq,
> > 			    const struct ixgbe_txq_ops *txq_ops)
> > {
> > 	if (txq->sw_ring_v == NULL)
> > 		return -1;
> >
> > 	/* leave the first one for overflow */
> > 	txq->sw_ring_v = txq->sw_ring_v + 1;
> > 	txq->ops = txq_ops;
> >
> > 	return 0;
> > }
> >
> > So we need check the SIMD bitwidth firstly to avoid changing the sw_ring* pointer address.
> >
> >
> > Also, looks like we need to add check on:
> >
> > int
> > ixgbe_dev_tx_done_cleanup(void *tx_queue, uint32_t free_cnt)
> > {
> > 	struct ixgbe_tx_queue *txq = (struct ixgbe_tx_queue *)tx_queue;
> > 	if (txq->offloads == 0 &&
> > #ifdef RTE_LIBRTE_SECURITY
> > 			!(txq->using_ipsec) &&
> > #endif
> > 			txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST) {
> > 		if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
> >                                                      <------------------- Add the same check
> > 				(rte_eal_process_type() != RTE_PROC_PRIMARY ||
> > 					txq->sw_ring_v != NULL)) {
> > 			return ixgbe_tx_done_cleanup_vec(txq, free_cnt);
> 
> Could you probably explain a bit more why it is needed?

To align with the vector selection path:

		if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
				(rte_eal_process_type() != RTE_PROC_PRIMARY ||
					ixgbe_txq_vec_setup(txq) == 0))


> 
> > 		} else {
> > 			return ixgbe_tx_done_cleanup_simple(txq, free_cnt);
> > 		}


> > > 2.17.1