[dpdk-dev] [PATCH v5 04/10] ethdev: add simple power management API
Guo, Jia
jia.guo at intel.com
Wed Oct 14 05:10:20 CEST 2020
> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Anatoly Burakov
> Sent: Saturday, October 10, 2020 12:02 AM
> To: dev at dpdk.org
> Cc: Ma, Liang J <liang.j.ma at intel.com>; Thomas Monjalon
> <thomas at monjalon.net>; Yigit, Ferruh <ferruh.yigit at intel.com>; Andrew
> Rybchenko <andrew.rybchenko at oktetlabs.ru>; Ray Kinsella
> <mdr at ashroe.eu>; Neil Horman <nhorman at tuxdriver.com>; Hunt, David
> <david.hunt at intel.com>; Ananyev, Konstantin
> <konstantin.ananyev at intel.com>; jerinjacobk at gmail.com; Richardson,
> Bruce <bruce.richardson at intel.com>; McDaniel, Timothy
> <timothy.mcdaniel at intel.com>; Eads, Gage <gage.eads at intel.com>;
> Macnamara, Chris <chris.macnamara at intel.com>
> Subject: [dpdk-dev] [PATCH v5 04/10] ethdev: add simple power
> management API
>
> From: Liang Ma <liang.j.ma at intel.com>
>
> Add a simple API to allow getting address of next RX descriptor from the
> PMD, as well as release notes information.
>
> Signed-off-by: Liang Ma <liang.j.ma at intel.com>
> Signed-off-by: Anatoly Burakov <anatoly.burakov at intel.com>
> ---
>
> Notes:
> v5:
> - Bring function format in line with other functions in the file
> - Ensure the API is supported by the driver before calling it (Konstantin)
>
> doc/guides/rel_notes/release_20_11.rst | 16 ++++++++++++++
> lib/librte_ethdev/rte_ethdev.c | 17 ++++++++++++++
> lib/librte_ethdev/rte_ethdev.h | 24 ++++++++++++++++++++
> lib/librte_ethdev/rte_ethdev_driver.h | 28 ++++++++++++++++++++++++
> lib/librte_ethdev/rte_ethdev_version.map | 1 +
> 5 files changed, 86 insertions(+)
>
> diff --git a/doc/guides/rel_notes/release_20_11.rst
> b/doc/guides/rel_notes/release_20_11.rst
> index 808bdc4e54..e85af5d3e9 100644
> --- a/doc/guides/rel_notes/release_20_11.rst
> +++ b/doc/guides/rel_notes/release_20_11.rst
> @@ -55,6 +55,11 @@ New Features
> Also, make sure to start the actual text at the margin.
> =======================================================
>
> +* **ethdev: add 1 new EXPERIMENTAL API for PMD power
> management.**
> +
> + * ``rte_eth_get_wake_addr()``
> + * add new eth_dev_ops ``get_wake_addr``
> +
> * **Updated Broadcom bnxt driver.**
>
> Updated the Broadcom bnxt driver with new features and improvements,
> including:
> @@ -136,6 +141,17 @@ New Features
> * Extern objects and functions can be plugged into the pipeline.
> * Transaction-oriented table updates.
>
> +* **Add PMD power management mechanism**
> +
> + 3 new Ethernet PMD power management mechanism is added through
" mechanisms are " please.
> + existing RX callback infrastructure.
> +
> + * Add power saving scheme based on UMWAIT instruction (x86 only)
> + * Add power saving scheme based on ``rte_pause()``
> + * Add power saving scheme based on frequency scaling through the
> + power library
> + * Add new EXPERIMENTAL API
> ``rte_power_pmd_mgmt_queue_enable()``
> + * Add new EXPERIMENTAL API
> ``rte_power_pmd_mgmt_queue_disable()``
> +
Could this doc be separate to other specific patch if it is not related with this patch?
>
> Removed Items
> -------------
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index 48d1333b17..352108f43c 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -4804,6 +4804,23 @@ rte_eth_tx_burst_mode_get(uint16_t port_id,
> uint16_t queue_id,
> dev->dev_ops->tx_burst_mode_get(dev, queue_id,
> mode)); }
>
> +int
> +rte_eth_get_wake_addr(uint16_t port_id, uint16_t queue_id,
> + volatile void **wake_addr, uint64_t *expected, uint64_t
> *mask) {
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> +
> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_wake_addr, -
> ENOTSUP);
> +
> + return eth_err(port_id,
> + dev->dev_ops->get_wake_addr(dev->data-
> >rx_queues[queue_id],
> + wake_addr, expected, mask));
> +}
> +
> int
> rte_eth_dev_set_mc_addr_list(uint16_t port_id,
> struct rte_ether_addr *mc_addr_set, diff --git
> a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h index
> d2bf74f128..a6cfe3cd57 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -4014,6 +4014,30 @@ __rte_experimental int
> rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
> struct rte_eth_burst_mode *mode);
>
> +/**
> + * Retrieve the wake up address from specific queue
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param queue_id
> + * The Tx queue on the Ethernet device for which information
> + * will be retrieved.
> + * @param wake_addr
> + * The pointer point to the address which is used for monitoring.
> + * @param expected
> + * The pointer point to value to be expected when descriptor is set.
> + * @param mask
> + * The pointer point to comparison bitmask for the expected value.
> + *
> + * @return
> + * - 0: Success.
> + * -EINVAL: Failed to get wake address.
> + */
Is that "-EINVAL " is the only error value which will be return?
> +__rte_experimental
> +int rte_eth_get_wake_addr(uint16_t port_id, uint16_t queue_id,
> + volatile void **wake_addr,
> + uint64_t *expected, uint64_t *mask);
> +
> /**
> * Retrieve device registers and register attributes (number of registers and
> * register size)
> diff --git a/lib/librte_ethdev/rte_ethdev_driver.h
> b/lib/librte_ethdev/rte_ethdev_driver.h
> index c3062c246c..935d46f25c 100644
> --- a/lib/librte_ethdev/rte_ethdev_driver.h
> +++ b/lib/librte_ethdev/rte_ethdev_driver.h
> @@ -574,6 +574,31 @@ typedef int (*eth_tx_hairpin_queue_setup_t)
> uint16_t nb_tx_desc,
> const struct rte_eth_hairpin_conf *hairpin_conf);
>
> +/**
> + * @internal
> + * Get the Wake up address.
> + *
> + * @param rxq
> + * Ethdev queue pointer.
> + * @param tail_desc_addr
> + * The pointer point to descriptor address var.
> + * @param expected
> + * The pointer point to value to be expected when descriptor is set.
> + * @param mask
> + * The pointer point to comparison bitmask for the expected value.
> + * @return
> + * Negative errno value on error, 0 on success.
> + *
> + * @retval 0
> + * Success.
> + * @retval -EINVAL
> + * Failed to get descriptor address.
> + */
The question is the same as above.
> +typedef int (*eth_get_wake_addr_t)
> + (void *rxq, volatile void **tail_desc_addr,
> + uint64_t *expected, uint64_t *mask);
> +
> +
> /**
> * @internal A structure containing the functions exported by an Ethernet
> driver.
> */
> @@ -713,6 +738,9 @@ struct eth_dev_ops {
> /**< Set up device RX hairpin queue. */
> eth_tx_hairpin_queue_setup_t tx_hairpin_queue_setup;
> /**< Set up device TX hairpin queue. */
> + eth_get_wake_addr_t get_wake_addr;
> + /**< Get wake up address. */
> +
> };
>
> /**
> diff --git a/lib/librte_ethdev/rte_ethdev_version.map
> b/lib/librte_ethdev/rte_ethdev_version.map
> index c95ef5157a..3cb2093980 100644
> --- a/lib/librte_ethdev/rte_ethdev_version.map
> +++ b/lib/librte_ethdev/rte_ethdev_version.map
> @@ -229,6 +229,7 @@ EXPERIMENTAL {
> # added in 20.11
> rte_eth_link_speed_to_str;
> rte_eth_link_to_str;
> + rte_eth_get_wake_addr;
> };
>
> INTERNAL {
> --
> 2.17.1
More information about the dev
mailing list