[dpdk-dev] [PATCH v8] net/iavf: support flex desc metadata extraction

[Guo, Jia]

> -----Original Message-----
> From: Bruce Richardson <bruce.richardson at intel.com>
> Sent: Wednesday, October 14, 2020 10:04 PM
> To: Yigit, Ferruh <ferruh.yigit at intel.com>
> Cc: Guo, Jia <jia.guo at intel.com>; Wu, Jingjing <jingjing.wu at intel.com>;
> Zhang, Qi Z <qi.z.zhang at intel.com>; Xing, Beilei <beilei.xing at intel.com>;
> dev at dpdk.org; Wang, Haiyue <haiyue.wang at intel.com>; Olivier Matz
> <olivier.matz at 6wind.com>
> Subject: Re: [PATCH v8] net/iavf: support flex desc metadata extraction
> 
> On Wed, Oct 14, 2020 at 01:31:39PM +0100, Ferruh Yigit wrote:
> > On 10/13/2020 9:17 AM, Jeff Guo wrote:
> > > Enable metadata extraction for flexible descriptors in AVF, that
> > > would allow network function directly get metadata without
> > > additional parsing which would reduce the CPU cost for VFs. The
> > > enabling metadata extractions involve the metadata of
> > > VLAN/IPv4/IPv6/IPv6-FLOW/TCP/MPLS flexible descriptors, and the VF
> > > could negotiate the capability of the flexible descriptor with PF
> > > and correspondingly configure the specific offload at receiving queues.
> > >
> > > Signed-off-by: Jeff Guo <jia.guo at intel.com>
> > > Acked-by: Haiyue Wang <haiyue.wang at intel.com>
> > > ---
> > > v8:
> > > rebase patch for apply issue
> > >
> > > v7:
> > > clean some useless and add doc
> > >
> > > v6:
> > > rebase patch
> > >
> > > v5:
> > > remove ovs configure since ovs is not protocol extraction
> > >
> > > v4:
> > > add flex desc type in rx queue for handling vector path handle ovs
> > > flex type
> > >
> > > v3:
> > > export these global symbols into .map
> > >
> > > v2:
> > > remove makefile change and modify the rxdid handling
> > > ---
> > >   config/rte_config.h                       |   3 +
> > >   doc/guides/nics/intel_vf.rst              |  16 +
> > >   doc/guides/rel_notes/release_20_11.rst    |   6 +
> > >   drivers/net/iavf/iavf.h                   |  24 +-
> > >   drivers/net/iavf/iavf_ethdev.c            | 394 ++++++++++++++++++++++
> > >   drivers/net/iavf/iavf_rxtx.c              | 252 ++++++++++++--
> > >   drivers/net/iavf/iavf_rxtx.h              | 168 +++++----
> > >   drivers/net/iavf/iavf_rxtx_vec_common.h   |   3 +
> > >   drivers/net/iavf/iavf_vchnl.c             |  22 +-
> > >   drivers/net/iavf/meson.build              |   2 +
> > >   drivers/net/iavf/rte_pmd_iavf.h           | 250 ++++++++++++++
> > >   drivers/net/iavf/rte_pmd_iavf_version.map |  13 +
> > >   12 files changed, 1039 insertions(+), 114 deletions(-)
> > >   create mode 100644 drivers/net/iavf/rte_pmd_iavf.h
> > >
> > > diff --git a/config/rte_config.h b/config/rte_config.h index
> > > 03d90d78bc..2c53072c3d 100644
> > > --- a/config/rte_config.h
> > > +++ b/config/rte_config.h
> > > @@ -127,6 +127,9 @@
> > >   #define RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF 4
> > >   #define RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM 4
> > > +/* iavf defines */
> > > +#undef RTE_LIBRTE_IAVF_16BYTE_RX_DESC
> > > +
> >
> > Hi Jeff,
> >
> > The 'RTE_LIBRTE_IAVF_16BYTE_RX_DESC' was already there, not
> introduced
> > with this patch, so I think better to add this change as different patch.
> >
> > Also not sure if we want to add more config options to the
> > 'rte_config.h', indeed otherway around and we are trying to get rid of
> > as much as compile time optios.
> > cc'ed Bruce too.
> >
> Actually, there is also patchset [1] to consider, which changes the format of
> these values in the header file. It's better to not "undef" the not set values,
> as that prevents someone from setting them via cflags/c_args when building.
> 
> /Bruce
> 
> [1] http://patches.dpdk.org/project/dpdk/list/?series=11928

Ok, make sense, and I will flow the new policy when I update the new version.