[dpdk-dev] [PATCH v2 03/11] app: check eth dev stop status

Min Hu (Connor) humin29 at huawei.com
Fri Oct 16 03:28:26 CEST 2020



在 2020/10/15 21:30, Andrew Rybchenko 写道:
> From: Ivan Ilchenko <ivan.ilchenko at oktetlabs.ru>
> 
> rte_eth_dev_stop() return value was changed from void to int,
> so this patch modify usage of this function across app
> according to new return type.
> 
> Signed-off-by: Ivan Ilchenko <ivan.ilchenko at oktetlabs.ru>
> Signed-off-by: Andrew Rybchenko <arybchenko at solarflare.com>
> ---
>   app/test/test_pmd_perf.c      |  5 ++++-
>   app/test/test_pmd_ring.c      | 31 ++++++++++++++++++++++++-------
>   app/test/test_pmd_ring_perf.c |  3 ++-
>   3 files changed, 30 insertions(+), 9 deletions(-)
> 
> diff --git a/app/test/test_pmd_perf.c b/app/test/test_pmd_perf.c
> index d1240b76f9..49a805c1e0 100644
> --- a/app/test/test_pmd_perf.c
> +++ b/app/test/test_pmd_perf.c
> @@ -802,7 +802,10 @@ test_pmd_perf(void)
>   		if (socketid != rte_eth_dev_socket_id(portid))
>   			continue;
>   
> -		rte_eth_dev_stop(portid);
> +		ret = rte_eth_dev_stop(portid);
> +		if (ret != 0)
> +			printf("rte_eth_dev_stop: err=%s, port=%u\n",
> +			       rte_strerror(-ret), portid);
>   	}
>   
>   	return 0;
> diff --git a/app/test/test_pmd_ring.c b/app/test/test_pmd_ring.c
> index 02873f26a1..86b1db2c1f 100644
> --- a/app/test/test_pmd_ring.c
> +++ b/app/test/test_pmd_ring.c
> @@ -225,6 +225,7 @@ test_pmd_ring_pair_create_attach(void)
>   	struct rte_eth_stats stats, stats2;
>   	struct rte_mbuf buf, *pbuf = &buf;
>   	struct rte_eth_conf null_conf;
> +	int ret;
>   
>   	memset(&null_conf, 0, sizeof(struct rte_eth_conf));
>   
> @@ -412,8 +413,14 @@ test_pmd_ring_pair_create_attach(void)
>   		return TEST_FAILED;
>   	}
>   
> -	rte_eth_dev_stop(rxtx_portd);
> -	rte_eth_dev_stop(rxtx_porte);
> +	ret = rte_eth_dev_stop(rxtx_portd);
> +	if (ret != 0)
> +		printf("Error: failed to stop port %u: %s\n",
> +		       rxtx_portd, rte_strerror(-ret));
> +	ret = rte_eth_dev_stop(rxtx_porte);
> +	if (ret != 0)
> +		printf("Error: failed to stop port %u: %s\n",
> +		       rxtx_porte, rte_strerror(-ret));

Could you please show all possible return value of the rte_eth_dev_stop?
Here is "if (ret != 0)", but in patch" [PATCH v2] net/failsafe: check 
eth dev stop status",it write:
+		ret = rte_eth_dev_stop(PORT_ID(sdev));
+		if (ret < 0)
+			ERROR("Failed to stop sub-device %u", SUB_ID(sdev));

Could the two be consistent? thanks.

>   	return TEST_SUCCESS;
>   }
> @@ -421,13 +428,22 @@ test_pmd_ring_pair_create_attach(void)
>   static void
>   test_cleanup_resources(void)
>   {
> -	int itr;
> +	int itr, ret;
>   	for (itr = 0; itr < NUM_RINGS; itr++)
>   		rte_ring_free(rxtx[itr]);
>   
> -	rte_eth_dev_stop(tx_porta);
> -	rte_eth_dev_stop(rx_portb);
> -	rte_eth_dev_stop(rxtx_portc);
> +	ret = rte_eth_dev_stop(tx_porta);
> +	if (ret != 0)
> +		printf("Error: failed to stop port %u: %s\n",
> +		       tx_porta, rte_strerror(-ret));
> +	ret = rte_eth_dev_stop(rx_portb);
> +	if (ret != 0)
> +		printf("Error: failed to stop port %u: %s\n",
> +		       rx_portb, rte_strerror(-ret));
> +	ret = rte_eth_dev_stop(rxtx_portc);
> +	if (ret != 0)
> +		printf("Error: failed to stop port %u: %s\n",
> +		       rxtx_portc, rte_strerror(-ret));
>   
>   	rte_mempool_free(mp);
>   	rte_vdev_uninit("net_ring_net_ringa");
> @@ -522,7 +538,8 @@ test_command_line_ring_port(void)
>   				"test stats reset cmdl_port0 is failed");
>   		TEST_ASSERT((test_get_stats(cmdl_port0) < 0),
>   				"test get stats cmdl_port0 is failed");
> -		rte_eth_dev_stop(cmdl_port0);
> +		TEST_ASSERT((rte_eth_dev_stop(cmdl_port0) == 0),
> +				"test stop cmdl_port0 is failed");
>   	}
>   	return TEST_SUCCESS;
>   }
> diff --git a/app/test/test_pmd_ring_perf.c b/app/test/test_pmd_ring_perf.c
> index 3b2ff9cb4f..d249b7de5f 100644
> --- a/app/test/test_pmd_ring_perf.c
> +++ b/app/test/test_pmd_ring_perf.c
> @@ -155,7 +155,8 @@ test_ring_pmd_perf(void)
>   	test_bulk_enqueue_dequeue();
>   
>   	/* release port and ring resources */
> -	rte_eth_dev_stop(ring_ethdev_port);
> +	if (rte_eth_dev_stop(ring_ethdev_port) != 0)
> +		return -1;
>   	rte_eth_dev_get_name_by_port(ring_ethdev_port, name);
>   	rte_vdev_uninit(name);
>   	rte_ring_free(r);
> 


More information about the dev mailing list