[dpdk-dev] [PATCH] net/i40e: fix FDIR issue for ETH + VLAN pattern

[beilei.xing at intel.com]

From: Beilei Xing <beilei.xing at intel.com>

Currently, can't create more than one following flow for
ETH + VLAN pattern:

> flow create 0 ingress pattern eth / vlan vid is 350 / end
actions queue index 2 / end

The root cause is the keys of all such flows are the same.

Fixes: 42044b69c67d ("net/i40e: support input set selection for FDIR")
Cc: stable at dpdk.org

Signed-off-by: Beilei Xing <beilei.xing at intel.com>
---
 drivers/net/i40e/i40e_flow.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index adc5da1c53..60043322a1 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -28,6 +28,9 @@
 #define I40E_IPV6_FRAG_HEADER	44
 #define I40E_TENANT_ARRAY_NUM	3
 #define I40E_TCI_MASK		0xFFFF
+#define I40E_PRI_MASK		0xE000
+#define I40E_CFI_MASK		0x1000
+#define I40E_VID_MASK		0x0FFF
 
 static int i40e_flow_validate(struct rte_eth_dev *dev,
 			      const struct rte_flow_attr *attr,
@@ -2705,12 +2708,22 @@ i40e_flow_parse_fdir_pattern(struct rte_eth_dev *dev,
 
 			RTE_ASSERT(!(input_set & I40E_INSET_LAST_ETHER_TYPE));
 			if (vlan_spec && vlan_mask) {
-				if (vlan_mask->tci ==
-				    rte_cpu_to_be_16(I40E_TCI_MASK)) {
-					input_set |= I40E_INSET_VLAN_INNER;
-					filter->input.flow_ext.vlan_tci =
-						vlan_spec->tci;
+				if (vlan_mask->tci !=
+				    rte_cpu_to_be_16(I40E_TCI_MASK) &&
+				    vlan_mask->tci !=
+				    rte_cpu_to_be_16(I40E_PRI_MASK) &&
+				    vlan_mask->tci !=
+				    rte_cpu_to_be_16(I40E_CFI_MASK) &&
+				    vlan_mask->tci !=
+				    rte_cpu_to_be_16(I40E_VID_MASK)) {
+					rte_flow_error_set(error, EINVAL,
+						   RTE_FLOW_ERROR_TYPE_ITEM,
+						   item,
+						   "Unsupported TCI mask.");
 				}
+				input_set |= I40E_INSET_VLAN_INNER;
+				filter->input.flow_ext.vlan_tci =
+					vlan_spec->tci;
 			}
 			if (vlan_spec && vlan_mask && vlan_mask->inner_type) {
 				if (vlan_mask->inner_type != RTE_BE16(0xffff)) {
-- 
2.26.2