[dpdk-dev] [PATCH v4 00/58] net: txgbe PMD
Jiawen Wu
jiawenwu at trustnetic.com
Thu Oct 22 13:23:03 CEST 2020
On October 19, 2020 4:53 PM, Jiawen Wu wrote:
> v4: Add log type introduction,
> add txgbe support in release note.
> v3: Merge some recent changes in the main repo,
> fix the checkpatch warnings.
> v2: Re-order patches and fix some known problems.
> v1: Introduce txgbe PMD.
>
Hi Ferruh,
Does this patch still need to be modified?
If it can be merged into the repo, I will make the second patch.
Perhaps, the second patch would miss the proposal deadline?
>
> Jiawen Wu (58):
> net/txgbe: add build and doc infrastructure
> net/txgbe: add ethdev probe and remove
> net/txgbe: add device init and uninit
> net/txgbe: add error types and registers
> net/txgbe: add MAC type and bus lan id
> net/txgbe: add HW infrastructure and dummy function
> net/txgbe: add EEPROM functions
> net/txgbe: add HW init and reset operation
> net/txgbe: add PHY init
> net/txgbe: add module identify
> net/txgbe: add PHY reset
> net/txgbe: add info get operation
> net/txgbe: add interrupt operation
> net/txgbe: add device configure operation
> net/txgbe: add link status change
> net/txgbe: add multi-speed link setup
> net/txgbe: add autoc read and write
> net/txgbe: add MAC address operations
> net/txgbe: add unicast hash bitmap
> net/txgbe: add Rx and Tx init
> net/txgbe: add Rx and Tx queues setup and release
> net/txgbe: add Rx and Tx start and stop
> net/txgbe: add packet type
> net/txgbe: fill simple transmit function
> net/txgbe: fill transmit function with hardware offload
> net/txgbe: fill Tx prepare function
> net/txgbe: fill receive functions
> net/txgbe: add device start operation
> net/txgbe: add Rx and Tx data path start and stop
> net/txgbe: add device stop and close operations
> net/txgbe: support Rx interrupt
> net/txgbe: add Rx and Tx queue info get
> net/txgbe: add device stats get
> net/txgbe: add device xstats get
> net/txgbe: add queue stats mapping
> net/txgbe: add VLAN handle support
> net/txgbe: add SWFW semaphore and lock
> net/txgbe: add PF module init and uninit for SRIOV
> net/txgbe: add process mailbox operation
> net/txgbe: add PF module configure for SRIOV
> net/txgbe: add VMDq configure
> net/txgbe: add RSS support
> net/txgbe: add DCB support
> net/txgbe: add flow control support
> net/txgbe: add FC auto negotiation support
> net/txgbe: add priority flow control support
> net/txgbe: add device promiscuous and allmulticast mode
> net/txgbe: add MTU set operation
> net/txgbe: add FW version get operation
> net/txgbe: add EEPROM info get operation
> net/txgbe: add register dump support
> net/txgbe: support device LED on and off
> net/txgbe: add mirror rule operations
> net/txgbe: add PTP support
> net/txgbe: add DCB info get operation
> net/txgbe: add Rx and Tx descriptor status
> net/txgbe: change stop operation callback to return int
> net/txgbe: introduce log type in the driver documentation
>
More information about the dev
mailing list