[dpdk-dev] [PATCH v5 3/7] app/bbdev: include explicit HARQ preloading

Tom Rix trix at redhat.com
Mon Oct 26 14:31:56 CET 2020


On 10/23/20 4:42 PM, Nicolas Chautru wrote:
> Run preloading explicitly for unit tests. Load each code block
> by reusing existing input op then restore for the actual test.
>
> Signed-off-by: Nicolas Chautru <nicolas.chautru at intel.com>
> Acked-by: Liu Tianjiao <tianjiao.liu at intel.com>
> ---
>  app/test-bbdev/main.h            |  1 +
>  app/test-bbdev/test_bbdev_perf.c | 51 +++++++++++++++++++++-------------------
>  2 files changed, 28 insertions(+), 24 deletions(-)
>
> diff --git a/app/test-bbdev/main.h b/app/test-bbdev/main.h
> index fb3dec8..dc10a50 100644
> --- a/app/test-bbdev/main.h
> +++ b/app/test-bbdev/main.h
> @@ -17,6 +17,7 @@
>  #define TEST_SKIPPED    1
>  
>  #define MAX_BURST 512U
> +#define MAX_OPS 1024U

This #define is not consistently used.

ex/ see retrieve_harq_ddr, the old 1024 is still being used.

>  #define DEFAULT_BURST 32U
>  #define DEFAULT_OPS 64U
>  #define DEFAULT_ITER 6U
> diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
> index b62848e..f30cbdb 100644
> --- a/app/test-bbdev/test_bbdev_perf.c
> +++ b/app/test-bbdev/test_bbdev_perf.c
> @@ -2513,20 +2513,20 @@ typedef int (test_case_function)(struct active_device *ad,
>  		bool preload)
>  {
>  	uint16_t j;
> -	int ret;
> -	uint32_t harq_offset = (uint32_t) queue_id * HARQ_INCR * 1024;
> -	struct rte_bbdev_op_data save_hc_in, save_hc_out;
> -	struct rte_bbdev_dec_op *ops_deq[MAX_BURST];
> +	int deq;
> +	uint32_t harq_offset = (uint32_t) queue_id * HARQ_INCR * MAX_OPS;
> +	struct rte_bbdev_op_data save_hc_in[MAX_OPS], save_hc_out[MAX_OPS];
> +	struct rte_bbdev_dec_op *ops_deq[MAX_OPS];
>  	uint32_t flags = ops[0]->ldpc_dec.op_flags;
>  	bool mem_in = flags & RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE;
>  	bool hc_in = flags & RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE;
>  	bool mem_out = flags & RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE;
>  	bool hc_out = flags & RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE;
>  	bool h_comp = flags & RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION;
> -	for (j = 0; j < n; ++j) {
> -		if ((mem_in || hc_in) && preload) {
> -			save_hc_in = ops[j]->ldpc_dec.harq_combined_input;
> -			save_hc_out = ops[j]->ldpc_dec.harq_combined_output;
> +	if ((mem_in || hc_in) && preload) {
> +		for (j = 0; j < n; ++j) {
> +			save_hc_in[j] = ops[j]->ldpc_dec.harq_combined_input;
> +			save_hc_out[j] = ops[j]->ldpc_dec.harq_combined_output;
>  			ops[j]->ldpc_dec.op_flags =
>  				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK +
>  				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE;

flags are usually handled with bit operators, not arithmetic.

this seems to be a general issue.

> @@ -2536,16 +2536,23 @@ typedef int (test_case_function)(struct active_device *ad,
>  			ops[j]->ldpc_dec.harq_combined_output.offset =
>  					harq_offset;
>  			ops[j]->ldpc_dec.harq_combined_input.offset = 0;
> -			rte_bbdev_enqueue_ldpc_dec_ops(dev_id, queue_id,
> -					&ops[j], 1);
> -			ret = 0;
> -			while (ret == 0)
> -				ret = rte_bbdev_dequeue_ldpc_dec_ops(
> -					dev_id, queue_id, &ops_deq[j], 1);
> +			harq_offset += HARQ_INCR;
> +		}
> +		rte_bbdev_enqueue_ldpc_dec_ops(dev_id, queue_id, &ops[0], n);
Add check the return is 'n'
> +		deq = 0;
> +		while (deq != n)
> +			deq += rte_bbdev_dequeue_ldpc_dec_ops(
> +					dev_id, queue_id, &ops_deq[deq],
> +					n - deq);

Add check the return >= 0

Tom

> +		/* Restore the operations */
> +		for (j = 0; j < n; ++j) {
>  			ops[j]->ldpc_dec.op_flags = flags;
> -			ops[j]->ldpc_dec.harq_combined_input = save_hc_in;
> -			ops[j]->ldpc_dec.harq_combined_output = save_hc_out;
> +			ops[j]->ldpc_dec.harq_combined_input = save_hc_in[j];
> +			ops[j]->ldpc_dec.harq_combined_output = save_hc_out[j];
>  		}
> +	}
> +	harq_offset = (uint32_t) queue_id * HARQ_INCR * MAX_OPS;
> +	for (j = 0; j < n; ++j) {
>  		/* Adjust HARQ offset when we reach external DDR */
>  		if (mem_in || hc_in)
>  			ops[j]->ldpc_dec.harq_combined_input.offset
> @@ -3231,11 +3238,9 @@ typedef int (test_case_function)(struct active_device *ad,
>  				mbuf_reset(
>  				ops_enq[j]->ldpc_dec.harq_combined_output.data);
>  		}
> -		if (extDdr) {
> -			bool preload = i == (TEST_REPETITIONS - 1);
> +		if (extDdr)
>  			preload_harq_ddr(tp->dev_id, queue_id, ops_enq,
> -					num_ops, preload);
> -		}
> +					num_ops, true);
>  		start_time = rte_rdtsc_precise();
>  
>  		for (enq = 0, deq = 0; enq < num_ops;) {
> @@ -3362,11 +3367,9 @@ typedef int (test_case_function)(struct active_device *ad,
>  				mbuf_reset(
>  				ops_enq[j]->ldpc_dec.harq_combined_output.data);
>  		}
> -		if (extDdr) {
> -			bool preload = i == (TEST_REPETITIONS - 1);
> +		if (extDdr)
>  			preload_harq_ddr(tp->dev_id, queue_id, ops_enq,
> -					num_ops, preload);
> -		}
> +					num_ops, true);
>  		start_time = rte_rdtsc_precise();
>  
>  		for (enq = 0, deq = 0; enq < num_ops;) {



More information about the dev mailing list