[dpdk-dev] [PATCH v5 1/7] app/bbdev: add explicit ut for latency vs validation

[Chautru, Nicolas]

> -----Original Message-----
> From: Tom Rix <trix at redhat.com>
> Sent: Monday, October 26, 2020 5:56 AM
> To: Chautru, Nicolas <nicolas.chautru at intel.com>; dev at dpdk.org;
> akhil.goyal at nxp.com
> Cc: david.marchand at redhat.com
> Subject: Re: [PATCH v5 1/7] app/bbdev: add explicit ut for latency vs
> validation
> 
> 
> On 10/23/20 4:42 PM, Nicolas Chautru wrote:
> > Adding explicit different ut when testing for validation or latency
> > (early termination enabled or not).
> >
> > Signed-off-by: Nicolas Chautru <nicolas.chautru at intel.com>
> > Acked-by: Aidan Goddard <aidan.goddard at accelercomm.com>
> > Acked-by: Dave Burley <dave.burley at accelercomm.com>
> > ---
> >  app/test-bbdev/test_bbdev_perf.c | 92
> > ++++++++++++++++++++++++++++++++++++++--
> Should update the copyright.
> >  1 file changed, 88 insertions(+), 4 deletions(-)
> >
> > diff --git a/app/test-bbdev/test_bbdev_perf.c
> > b/app/test-bbdev/test_bbdev_perf.c
> > index 6e5535d..3554a77 100644
> > --- a/app/test-bbdev/test_bbdev_perf.c
> > +++ b/app/test-bbdev/test_bbdev_perf.c
> > @@ -3999,12 +3999,14 @@ typedef int (test_case_function)(struct
> active_device *ad,
> >  	return i;
> >  }
> >
> > +/* Test case for latency/validation for LDPC Decoder */
> >  static int
> >  latency_test_ldpc_dec(struct rte_mempool *mempool,
> >  		struct test_buffers *bufs, struct rte_bbdev_dec_op *ref_op,
> >  		int vector_mask, uint16_t dev_id, uint16_t queue_id,
> >  		const uint16_t num_to_process, uint16_t burst_sz,
> > -		uint64_t *total_time, uint64_t *min_time, uint64_t
> *max_time)
> > +		uint64_t *total_time, uint64_t *min_time, uint64_t
> *max_time,
> > +		bool disable_et)
> >  {
> >  	int ret = TEST_SUCCESS;
> >  	uint16_t i, j, dequeued;
> > @@ -4026,7 +4028,7 @@ typedef int (test_case_function)(struct
> active_device *ad,
> >  				"rte_bbdev_dec_op_alloc_bulk() failed");
> >
> >  		/* For latency tests we need to disable early termination */
> > -		if (check_bit(ref_op->ldpc_dec.op_flags,
> > +		if (disable_et && check_bit(ref_op->ldpc_dec.op_flags,
> >
> 	RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE))
> >  			ref_op->ldpc_dec.op_flags -=
> >
> 	RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE;
> Bit clearing is usually done with &= ~()

This is the coding style for rest of the file hence sticking to it. 

> > @@ -4248,7 +4250,7 @@ typedef int (test_case_function)(struct
> active_device *ad,
> >  	TEST_ASSERT_NOT_NULL(op_type_str, "Invalid op type: %u",
> op_type);
> >
> >  	printf("+ ------------------------------------------------------- +\n");
> > -	printf("== test: validation/latency\ndev: %s, burst size: %u, num ops:
> %u, op type: %s\n",
> > +	printf("== test: latency\ndev: %s, burst size: %u, num ops: %u, op
> > +type: %s\n",
> >  			info.dev_name, burst_sz, num_to_process,
> op_type_str);
> >
> >  	if (op_type == RTE_BBDEV_OP_TURBO_DEC) @@ -4270,7 +4272,83
> @@
> > typedef int (test_case_function)(struct active_device *ad,
> >  		iter = latency_test_ldpc_dec(op_params->mp, bufs,
> >  				op_params->ref_dec_op, op_params-
> >vector_mask,
> >  				ad->dev_id, queue_id, num_to_process,
> > +				burst_sz, &total_time, &min_time,
> &max_time,
> > +				true);
> > +	else
> > +		iter = latency_test_enc(op_params->mp, bufs,
> > +					op_params->ref_enc_op,
> > +					ad->dev_id, queue_id,
> > +					num_to_process, burst_sz,
> &total_time,
> > +					&min_time, &max_time);
> 
> This is a repeat of RTE_BBDEV_OP_TURBO_ENC.
> 
> Do not need both.

Fair enough. That is part of previous code but can simplify. 

> 
> If the point is to have a else and not fail when the op_type is unknown, then
> 
> remove the earlier all and comment the else something like
> 
> else /* RTE_BBDEC_OP_TURBO_ENC */
> 
> > +
> > +	if (iter <= 0)
> > +		return TEST_FAILED;
> > +
> > +	printf("Operation latency:\n"
> > +			"\tavg: %lg cycles, %lg us\n"
> > +			"\tmin: %lg cycles, %lg us\n"
> > +			"\tmax: %lg cycles, %lg us\n",
> > +			(double)total_time / (double)iter,
> > +			(double)(total_time * 1000000) / (double)iter /
> > +			(double)rte_get_tsc_hz(), (double)min_time,
> > +			(double)(min_time * 1000000) /
> (double)rte_get_tsc_hz(),
> > +			(double)max_time, (double)(max_time * 1000000) /
> > +			(double)rte_get_tsc_hz());
> Could remove a tab from the last 9 lines for better alignment with printf

I am unsure I follow. The recommended spacing is 2 tabs for continuation and unsure how the alignment would be better.
I typically only reduce to 1 tab only if I have to (80 chars limit becoming cumbersome with nested statements).

> > +
> > +	return TEST_SUCCESS;
> > +}
> > +
> > +static int
> > +validation_test(struct active_device *ad,
> > +		struct test_op_params *op_params)
> > +{
> > +	int iter;
> > +	uint16_t burst_sz = op_params->burst_sz;
> > +	const uint16_t num_to_process = op_params->num_to_process;
> > +	const enum rte_bbdev_op_type op_type = test_vector.op_type;
> > +	const uint16_t queue_id = ad->queue_ids[0];
> > +	struct test_buffers *bufs = NULL;
> > +	struct rte_bbdev_info info;
> > +	uint64_t total_time, min_time, max_time;
> > +	const char *op_type_str;
> > +
> > +	total_time = max_time = 0;
> > +	min_time = UINT64_MAX;
> > +
> > +	TEST_ASSERT_SUCCESS((burst_sz > MAX_BURST),
> > +			"BURST_SIZE should be <= %u", MAX_BURST);
> > +
> > +	rte_bbdev_info_get(ad->dev_id, &info);
> > +	bufs = &op_params-
> >q_bufs[GET_SOCKET(info.socket_id)][queue_id];
> > +
> > +	op_type_str = rte_bbdev_op_type_str(op_type);
> > +	TEST_ASSERT_NOT_NULL(op_type_str, "Invalid op type: %u",
> op_type);
> > +
> > +	printf("+ ------------------------------------------------------- +\n");
> > +	printf("== test: validation\ndev: %s, burst size: %u, num ops: %u, op
> type: %s\n",
> > +			info.dev_name, burst_sz, num_to_process,
> op_type_str);
> > +
> > +	if (op_type == RTE_BBDEV_OP_TURBO_DEC)
> > +		iter = latency_test_dec(op_params->mp, bufs,
> > +				op_params->ref_dec_op, op_params-
> >vector_mask,
> > +				ad->dev_id, queue_id, num_to_process,
> >  				burst_sz, &total_time, &min_time,
> &max_time);
> > +	else if (op_type == RTE_BBDEV_OP_TURBO_ENC)
> > +		iter = latency_test_enc(op_params->mp, bufs,
> > +				op_params->ref_enc_op, ad->dev_id,
> queue_id,
> > +				num_to_process, burst_sz, &total_time,
> > +				&min_time, &max_time);
> > +	else if (op_type == RTE_BBDEV_OP_LDPC_ENC)
> > +		iter = latency_test_ldpc_enc(op_params->mp, bufs,
> > +				op_params->ref_enc_op, ad->dev_id,
> queue_id,
> > +				num_to_process, burst_sz, &total_time,
> > +				&min_time, &max_time);
> > +	else if (op_type == RTE_BBDEV_OP_LDPC_DEC)
> > +		iter = latency_test_ldpc_dec(op_params->mp, bufs,
> > +				op_params->ref_dec_op, op_params-
> >vector_mask,
> > +				ad->dev_id, queue_id, num_to_process,
> > +				burst_sz, &total_time, &min_time,
> &max_time,
> > +				false);
> 
> This 'false' is the only change from f latency_test.
> 
> These should be refactored to a common function. Then use a #define or
> similar wrapper for calling with/without this flag.

Fair enough. Thanks. I will push an update later today. 

> 
> Tom
> 
> >  	else
> >  		iter = latency_test_enc(op_params->mp, bufs,
> >  					op_params->ref_enc_op,
> > @@ -4930,6 +5008,12 @@ typedef int (test_case_function)(struct
> > active_device *ad,  }
> >
> >  static int
> > +validation_tc(void)
> > +{
> > +	return run_test_case(validation_test); }
> > +
> > +static int
> >  interrupt_tc(void)
> >  {
> >  	return run_test_case(throughput_test); @@ -4960,7 +5044,7 @@
> typedef
> > int (test_case_function)(struct active_device *ad,
> >  	.setup = testsuite_setup,
> >  	.teardown = testsuite_teardown,
> >  	.unit_test_cases = {
> > -		TEST_CASE_ST(ut_setup, ut_teardown, latency_tc),
> > +		TEST_CASE_ST(ut_setup, ut_teardown, validation_tc),
> >  		TEST_CASES_END() /**< NULL terminate unit test array */
> >  	}
> >  };