[dpdk-dev] [PATCH v4 00/58] net: txgbe PMD

[Jiawen Wu]

On Monday, October 26, 2020 10:56 PM, Ferruh Yigit wrote:
> On 10/19/2020 9:53 AM, Jiawen Wu wrote:
> > v4: Add log type introduction,
> >      add txgbe support in release note.
> > v3: Merge some recent changes in the main repo,
> >      fix the checkpatch warnings.
> > v2: Re-order patches and fix some known problems.
> > v1: Introduce txgbe PMD.
> >
> >
> > Jiawen Wu (58):
> >    net/txgbe: add build and doc infrastructure
> >    net/txgbe: add ethdev probe and remove
> >    net/txgbe: add device init and uninit
> >    net/txgbe: add error types and registers
> >    net/txgbe: add MAC type and bus lan id
> >    net/txgbe: add HW infrastructure and dummy function
> >    net/txgbe: add EEPROM functions
> >    net/txgbe: add HW init and reset operation
> >    net/txgbe: add PHY init
> >    net/txgbe: add module identify
> >    net/txgbe: add PHY reset
> >    net/txgbe: add info get operation
> >    net/txgbe: add interrupt operation
> >    net/txgbe: add device configure operation
> >    net/txgbe: add link status change
> >    net/txgbe: add multi-speed link setup
> >    net/txgbe: add autoc read and write
> >    net/txgbe: add MAC address operations
> >    net/txgbe: add unicast hash bitmap
> >    net/txgbe: add Rx and Tx init
> >    net/txgbe: add Rx and Tx queues setup and release
> >    net/txgbe: add Rx and Tx start and stop
> >    net/txgbe: add packet type
> >    net/txgbe: fill simple transmit function
> >    net/txgbe: fill transmit function with hardware offload
> >    net/txgbe: fill Tx prepare function
> >    net/txgbe: fill receive functions
> >    net/txgbe: add device start operation
> >    net/txgbe: add Rx and Tx data path start and stop
> >    net/txgbe: add device stop and close operations
> >    net/txgbe: support Rx interrupt
> >    net/txgbe: add Rx and Tx queue info get
> >    net/txgbe: add device stats get
> >    net/txgbe: add device xstats get
> >    net/txgbe: add queue stats mapping
> >    net/txgbe: add VLAN handle support
> >    net/txgbe: add SWFW semaphore and lock
> >    net/txgbe: add PF module init and uninit for SRIOV
> >    net/txgbe: add process mailbox operation
> >    net/txgbe: add PF module configure for SRIOV
> >    net/txgbe: add VMDq configure
> >    net/txgbe: add RSS support
> >    net/txgbe: add DCB support
> >    net/txgbe: add flow control support
> >    net/txgbe: add FC auto negotiation support
> >    net/txgbe: add priority flow control support
> >    net/txgbe: add device promiscuous and allmulticast mode
> >    net/txgbe: add MTU set operation
> >    net/txgbe: add FW version get operation
> >    net/txgbe: add EEPROM info get operation
> >    net/txgbe: add register dump support
> >    net/txgbe: support device LED on and off
> >    net/txgbe: add mirror rule operations
> >    net/txgbe: add PTP support
> >    net/txgbe: add DCB info get operation
> >    net/txgbe: add Rx and Tx descriptor status
> >    net/txgbe: change stop operation callback to return int
> >    net/txgbe: introduce log type in the driver documentation
> 
> For series,
> Reviewed-by: Ferruh Yigit <ferruh.yigit at intel.com>
> 
> Series applied to dpdk-next-net/main, thanks.
> 

Thanks Ferruh,

I want to know when should I send the web patch for NICs support.
Will I be notified after the patch is merged?
Or after the release of rc2?

> 
> 57/58 & 58/58 has been distributed to the relevant commits while merging,
> please double check them in the upstream repo.
> 
> 56/58 & 53/58 has been dropped while merging.
>   56/58 needs a new version which can be send individually,
>   53/58 is adding a deprecated feature, it can't go in as it is.
> 
> Also can you please send a patch for the comment mentioned in 38/58?

I will send two additional patches, one as a new version for 56/58, the other one to fix 'rte_panic()'.