[dpdk-dev] [PATCH v6 1/8] net/dpaa: add support for fmlib in dpdk

Hemant Agrawal hemant.agrawal at nxp.com
Tue Sep 1 14:36:43 CEST 2020


DPAA platorm MAC interface is known as FMAN i.e. Frame Manager.
There are two ways to control it.
1. Statically configure the queues and classification rules before the
start of the application using FMC tool.
2. Dynamically configure it within application by making API calls of
fmlib.

The fmlib or Frame Manager library provides an API on top of the
Frame Manager driver ioctl calls, that provides a user space application
with a simple way to configure driver parameters and PCD
(parse - classify - distribute) rules.

This patch integrates the base fmlib so that various queue config, RSS
and classification related features can be supported on DPAA platform.

Signed-off-by: Sachin Saxena <sachin.saxena at nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal at nxp.com>
---
 doc/guides/nics/dpaa.rst                  |   52 +-
 doc/guides/platform/dpaa.rst              |   21 +-
 drivers/net/dpaa/fmlib/dpaa_integration.h |   50 +
 drivers/net/dpaa/fmlib/fm_ext.h           |  463 ++
 drivers/net/dpaa/fmlib/fm_lib.c           |  561 ++
 drivers/net/dpaa/fmlib/fm_pcd_ext.h       | 5787 +++++++++++++++++++++
 drivers/net/dpaa/fmlib/fm_port_ext.h      | 3350 ++++++++++++
 drivers/net/dpaa/fmlib/ncsw_ext.h         |  158 +
 drivers/net/dpaa/fmlib/net_ext.h          |  411 ++
 drivers/net/dpaa/meson.build              |    3 +-
 10 files changed, 10849 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/dpaa/fmlib/dpaa_integration.h
 create mode 100644 drivers/net/dpaa/fmlib/fm_ext.h
 create mode 100644 drivers/net/dpaa/fmlib/fm_lib.c
 create mode 100644 drivers/net/dpaa/fmlib/fm_pcd_ext.h
 create mode 100644 drivers/net/dpaa/fmlib/fm_port_ext.h
 create mode 100644 drivers/net/dpaa/fmlib/ncsw_ext.h
 create mode 100644 drivers/net/dpaa/fmlib/net_ext.h

diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
index 17839a920..7e6010471 100644
--- a/doc/guides/nics/dpaa.rst
+++ b/doc/guides/nics/dpaa.rst
@@ -1,5 +1,5 @@
 ..  SPDX-License-Identifier: BSD-3-Clause
-    Copyright 2017 NXP
+    Copyright 2017,2020 NXP
 
 
 DPAA Poll Mode Driver
@@ -21,6 +21,7 @@ Contents summary
 
 - DPAA overview
 - DPAA driver architecture overview
+- FMAN configuration tools and library
 
 .. _dpaa_overview:
 
@@ -285,6 +286,55 @@ for details.
       Done
       testpmd>
 
+FMAN Config
+-----------
+
+Frame Manager is also responsible for parser, classify and distribute
+functionality in the DPAA.
+
+   FMAN supports:
+   Packet parsing at wire speed. It supports standard protocols parsing and
+   identification by HW (VLAN/IP/UDP/TCP/SCTP/PPPoE/PPP/MPLS/GRE/IPSec).
+   It supports non-standard UDF header parsing for custom protocols.
+   Classification / Distribution: Coarse classification based on Key generation
+   Hash and exact match lookup
+
+FMC - FMAN Configuration Tool
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+   This tool is available in User Space. The tool is used to configure FMAN
+   Physical (MAC) or Ephemeral (OH)ports for Parse/Classify/distribute.
+   The PCDs can be hash based where a set of fields are key input for hash
+   generation within FMAN keygen. The hash value is used to generate a FQID for
+   frame. There is a provision to setup exact match lookup too where field
+   values within a packet drives corresponding FQID.
+   Currently it works on XML file inputs.
+
+   Limitations:
+   1.For Dynamic Configuration change, currently no support is available.
+   E.g. enable/disable a port, a operator (set of VLANs and associate rules).
+
+   2.During FMC configuration, port for which policy is being configured is
+   brought down and the policy is flushed on port before new policy is updated
+   for the port. Support is required to add/append/delete etc.
+
+   3.FMC, being a separate user-space application, needs to be invoked from
+   Shell.
+
+
+   The details can be found in FMC Doc at:
+   `Frame Mnager Configuration Tool <https://www.nxp.com/docs/en/application-note/AN4760.pdf>`_.
+
+FMLIB
+~~~~~
+   The Frame Manager library provides an API on top of the Frame Manager driver
+   ioctl calls, that provides a user space application with a simple way to
+   configure driver parameters and PCD (parse - classify - distribute) rules.
+
+   This is an alternate to the FMC based configuration. This libray provides
+   direct ioctl based interfaces for FMAN configuration as used by the FMC tool
+   as well. This helps in overcoming the main limitaiton of FMC - i.e. lack
+   of dynamic configuration.
+
 Limitations
 -----------
 
diff --git a/doc/guides/platform/dpaa.rst b/doc/guides/platform/dpaa.rst
index 6005f2221..20a0e3932 100644
--- a/doc/guides/platform/dpaa.rst
+++ b/doc/guides/platform/dpaa.rst
@@ -58,17 +58,28 @@ compatible board:
 
 4. **FMC Tool**
 
-   Before any DPDK application can be executed, the Frame Manager Configuration
-   Tool (FMC) need to be executed to set the configurations of the queues. This
+   If one is planning to use more than 1 Recv queue and hardware capability to
+   parse, classify and distribute the packets, the Frame Manager Configuration
+   Tool (FMC) need to be executed to set the configurations of the queues before
+   running the DPAA based DPDK application. This setting is persistent, the
+   configuration will remain in the hardware till it is re-configured. This
    includes the queue state, RSS and other policies.
    This tool can be obtained from `NXP (Freescale) Public Git Repository <https://source.codeaurora.org/external/qoriq/qoriq-components/fmc>`_.
 
    This tool needs configuration files which are available in the
    :ref:`DPDK Extra Scripts <extra_scripts>`, described below for DPDK usages.
 
-As an alternative method, DPAA PMD can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA board.
+   Note that DPAA PMD can also be executed using images provided
+   as part of SDK from NXP. The SDK includes all the above prerequisites
+   necessary (i.e. fmc tool) to bring up a DPAA board.
+
+   As an alternate method, DPAA PMDs starting from DPDK 20.11 also support the
+   fmlib library integration. The driver will detect about any existing FMC
+   based config (if /tmp/fmc.bin is present). DPAA FMD will be used only if no
+   previous fmc config is existing.
+
+   Note that fmlib based integratin rely on underlying fmd driver in kernel,
+   which is available as part of NXP kernel or NXP SDK.
 
 The following dependencies are not part of DPDK and must be installed
 separately:
diff --git a/drivers/net/dpaa/fmlib/dpaa_integration.h b/drivers/net/dpaa/fmlib/dpaa_integration.h
new file mode 100644
index 000000000..33b9619f9
--- /dev/null
+++ b/drivers/net/dpaa/fmlib/dpaa_integration.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __DPAA_INTEGRATION_H
+#define __DPAA_INTEGRATION_H
+
+#include "ncsw_ext.h"
+
+#define DPAA_VERSION	11
+
+#define BM_MAX_NUM_OF_POOLS	64	/**< Number of buffers pools */
+
+#define INTG_MAX_NUM_OF_FM	2
+
+/* Ports defines */
+#define FM_MAX_NUM_OF_1G_MACS	6
+#define FM_MAX_NUM_OF_10G_MACS	2
+#define FM_MAX_NUM_OF_MACS	(FM_MAX_NUM_OF_1G_MACS + FM_MAX_NUM_OF_10G_MACS)
+#define FM_MAX_NUM_OF_OH_PORTS	6
+
+#define FM_MAX_NUM_OF_1G_RX_PORTS   FM_MAX_NUM_OF_1G_MACS
+#define FM_MAX_NUM_OF_10G_RX_PORTS  FM_MAX_NUM_OF_10G_MACS
+#define FM_MAX_NUM_OF_RX_PORTS	\
+	(FM_MAX_NUM_OF_10G_RX_PORTS + FM_MAX_NUM_OF_1G_RX_PORTS)
+
+#define FM_MAX_NUM_OF_1G_TX_PORTS   FM_MAX_NUM_OF_1G_MACS
+#define FM_MAX_NUM_OF_10G_TX_PORTS  FM_MAX_NUM_OF_10G_MACS
+#define FM_MAX_NUM_OF_TX_PORTS	\
+	(FM_MAX_NUM_OF_10G_TX_PORTS + FM_MAX_NUM_OF_1G_TX_PORTS)
+
+#define FM_PORT_MAX_NUM_OF_EXT_POOLS		4
+	/**< Number of external BM pools per Rx port */
+#define FM_NUM_CONG_GRPS		256
+	/**< Total number of congestion groups in QM */
+#define FM_MAX_NUM_OF_SUB_PORTALS		16
+#define FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS   0
+
+/* PCD defines */
+#define FM_PCD_PLCR_NUM_ENTRIES		256
+		/**< Total number of policer profiles */
+#define FM_PCD_KG_NUM_OF_SCHEMES	32
+		/**< Total number of KG schemes */
+#define FM_PCD_MAX_NUM_OF_CLS_PLANS	256
+		/**< Number of classification plan entries. */
+
+#define FM_MAX_PFC_PRIO		8
+
+#endif /* __DPAA_INTEGRATION_H */
diff --git a/drivers/net/dpaa/fmlib/fm_ext.h b/drivers/net/dpaa/fmlib/fm_ext.h
new file mode 100644
index 000000000..27c9fb471
--- /dev/null
+++ b/drivers/net/dpaa/fmlib/fm_ext.h
@@ -0,0 +1,463 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_EXT_H
+#define __FM_EXT_H
+
+#include "ncsw_ext.h"
+#include "dpaa_integration.h"
+
+#define FM_IOC_TYPE_BASE	(NCSW_IOC_TYPE_BASE + 1)
+#define FMT_IOC_TYPE_BASE	(NCSW_IOC_TYPE_BASE + 3)
+
+#define MODULE_FM		0x00010000
+#define __ERR_MODULE__		MODULE_FM
+
+/* #define FM_LIB_DBG */
+
+#if defined(FM_LIB_DBG)
+	#define _fml_dbg(fmt, args...) \
+	rte_log(RTE_LOG_ ## level, dpaa_logtype_pmd, "fmlib:%s(): " fmt "\n", \
+			__func__, ##args)
+#else
+	#define _fml_dbg(arg...)
+#endif
+
+/*#define FM_IOCTL_DBG*/
+
+#if defined(FM_IOCTL_DBG)
+	#define _fm_ioctl_dbg(fmt, args...) \
+	rte_log(RTE_LOG_ ## level, dpaa_logtype_pmd, "fmioc:%s(): " fmt "\n", \
+				__func__, ##args)
+#else
+	#define _fm_ioctl_dbg(arg...)
+#endif
+
+/*
+ * @Group	lnx_ioctl_ncsw_grp	NetCommSw Linux User-Space (IOCTL) API
+ * @{
+ */
+
+#define NCSW_IOC_TYPE_BASE	0xe0
+	/**< defines the IOCTL type for all the NCSW Linux module commands */
+
+/*
+ * @Group	  lnx_usr_FM_grp Frame Manager API
+ *
+ * @Description   FM API functions, definitions and enums.
+ *
+ *	  The FM module is the main driver module and is a mandatory
+ *	  module for FM driver users. This module must be initialized
+ *	  first prior to any other drivers modules.
+ *	  The FM is a "singleton" module. It is responsible of the
+ *	  common HW modules: FPM, DMA, common QMI and common BMI
+ *	  initializations and run-time control routines. This module
+ *	  must be initialized always when working with any of the FM modules.
+ *	  NOTE - We assume that the FM library will be initialized only
+ *	  by core No. 0!
+ *
+ * @{
+ */
+
+/*
+ * @Description   Enum for defining port types
+ */
+typedef enum e_fm_port_type {
+	e_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0,  /**< Offline parsing port */
+	e_FM_PORT_TYPE_RX,			/**< 1G Rx port */
+	e_FM_PORT_TYPE_RX_10G,			/**< 10G Rx port */
+	e_FM_PORT_TYPE_TX,			/**< 1G Tx port */
+	e_FM_PORT_TYPE_TX_10G,			/**< 10G Tx port */
+	e_FM_PORT_TYPE_RX_2_5G,			/**< 2.5G Rx port */
+	e_FM_PORT_TYPE_TX_2_5G,			/**< 2.5G Tx port */
+	e_FM_PORT_TYPE_DUMMY
+} e_fm_port_type;
+
+/*
+ * @Description   Parse results memory layout
+ */
+typedef struct t_fm_prs_result {
+	volatile uint8_t	lpid;		/**< Logical port id */
+	volatile uint8_t	shimr;		/**< Shim header result  */
+	volatile uint16_t	l2r;		/**< Layer 2 result */
+	volatile uint16_t	l3r;		/**< Layer 3 result */
+	volatile uint8_t	l4r;		/**< Layer 4 result */
+	volatile uint8_t	cplan;		/**< Classification plan id */
+	volatile uint16_t	nxthdr;		/**< Next Header  */
+	volatile uint16_t	cksum;		/**< Running-sum */
+	volatile uint16_t	flags_frag_off;
+			/**<Flags & fragment-offset field of the last IP-header
+			 */
+	volatile uint8_t	route_type;
+			/**< Routing type field of a IPv6 routing extension
+			 * header
+			 */
+	volatile uint8_t	rhp_ip_valid;
+			/**< Routing Extension Header Present; last bit is IP
+			 * valid
+			 */
+	volatile uint8_t	shim_off[2];	/**< Shim offset */
+	volatile uint8_t	ip_pid_off;
+			/**< IP PID (last IP-proto)offset */
+	volatile uint8_t	eth_off;	/**< ETH offset */
+	volatile uint8_t	llc_snap_off;	/**< LLC_SNAP offset */
+	volatile uint8_t	vlan_off[2];	/**< VLAN offset */
+	volatile uint8_t	etype_off;	/**< ETYPE offset */
+	volatile uint8_t	pppoe_off;	/**< PPP offset */
+	volatile uint8_t	mpls_off[2];	/**< MPLS offset */
+	volatile uint8_t	ip_off[2];	/**< IP offset */
+	volatile uint8_t	gre_off;	/**< GRE offset */
+	volatile uint8_t	l4_off;		/**< Layer 4 offset */
+	volatile uint8_t	nxthdr_off;	/**< Parser end point */
+} __rte_packed t_fm_prs_result;
+
+/*
+ * @Collection   FM Parser results
+ */
+#define FM_PR_L2_VLAN_STACK	0x00000100  /**< Parse Result: VLAN stack */
+#define FM_PR_L2_ETHERNET	0x00008000  /**< Parse Result: Ethernet*/
+#define FM_PR_L2_VLAN		0x00004000  /**< Parse Result: VLAN */
+#define FM_PR_L2_LLC_SNAP	0x00002000  /**< Parse Result: LLC_SNAP */
+#define FM_PR_L2_MPLS		0x00001000  /**< Parse Result: MPLS */
+#define FM_PR_L2_PPPoE		0x00000800  /**< Parse Result: PPPoE */
+/* @} */
+
+/*
+ * @Collection   FM Frame descriptor macros
+ */
+#define FM_FD_CMD_FCO		0x80000000  /**< Frame queue Context Override */
+#define FM_FD_CMD_RPD		0x40000000  /**< Read Prepended Data */
+#define FM_FD_CMD_UPD		0x20000000  /**< Update Prepended Data */
+#define FM_FD_CMD_DTC		0x10000000  /**< Do L4 Checksum */
+#define FM_FD_CMD_DCL4C		0x10000000  /**< Didn't calculate L4 Checksum */
+#define FM_FD_CMD_CFQ		0x00ffffff  /**< Confirmation Frame Queue */
+
+#define FM_FD_ERR_UNSUPPORTED_FORMAT	0x04000000
+					/**< Not for Rx-Port! Unsupported Format
+					 */
+#define FM_FD_ERR_LENGTH	0x02000000
+					/**< Not for Rx-Port! Length Error */
+#define FM_FD_ERR_DMA		0x01000000  /**< DMA Data error */
+
+#define FM_FD_IPR		0x00000001  /**< IPR frame (not error) */
+
+#define FM_FD_ERR_IPR_NCSP	(0x00100000 | FM_FD_IPR)
+						/**< IPR non-consistent-sp */
+#define FM_FD_ERR_IPR		(0x00200000 | FM_FD_IPR) /**< IPR error */
+#define FM_FD_ERR_IPR_TO	(0x00300000 | FM_FD_IPR) /**< IPR timeout */
+
+#ifdef FM_CAPWAP_SUPPORT
+#define FM_FD_ERR_CRE		0x00200000
+#define FM_FD_ERR_CHE		0x00100000
+#endif /* FM_CAPWAP_SUPPORT */
+
+#define FM_FD_ERR_PHYSICAL	0x00080000
+			/**< Rx FIFO overflow, FCS error, code error, running
+			 * disparity error (SGMII and TBI modes), FIFO parity
+			 * error. PHY Sequence error, PHY error control
+			 * character detected.
+			 */
+#define FM_FD_ERR_SIZE		0x00040000
+		/**< Frame too long OR Frame size exceeds max_length_frame */
+#define FM_FD_ERR_CLS_DISCARD	0x00020000  /**< classification discard */
+#define FM_FD_ERR_EXTRACTION	0x00008000  /**< Extract Out of Frame */
+#define FM_FD_ERR_NO_SCHEME	0x00004000  /**< No Scheme Selected */
+#define FM_FD_ERR_KEYSIZE_OVERFLOW	0x00002000  /**< Keysize Overflow */
+#define FM_FD_ERR_COLOR_RED	0x00000800  /**< Frame color is red */
+#define FM_FD_ERR_COLOR_YELLOW	0x00000400  /**< Frame color is yellow */
+#define FM_FD_ERR_ILL_PLCR	0x00000200
+				/**< Illegal Policer Profile selected */
+#define FM_FD_ERR_PLCR_FRAME_LEN 0x00000100  /**< Policer frame length error */
+#define FM_FD_ERR_PRS_TIMEOUT	0x00000080  /**< Parser Time out Exceed */
+#define FM_FD_ERR_PRS_ILL_INSTRUCT 0x00000040
+					/**< Invalid Soft Parser instruction */
+#define FM_FD_ERR_PRS_HDR_ERR	0x00000020
+		/**< Header error was identified during parsing */
+#define FM_FD_ERR_BLOCK_LIMIT_EXCEEDED  0x00000008
+			/**< Frame parsed beyind 256 first bytes */
+
+#define FM_FD_TX_STATUS_ERR_MASK	(FM_FD_ERR_UNSUPPORTED_FORMAT   | \
+					FM_FD_ERR_LENGTH		| \
+					FM_FD_ERR_DMA) /**< TX Error FD bits */
+
+#define FM_FD_RX_STATUS_ERR_MASK	(FM_FD_ERR_UNSUPPORTED_FORMAT   | \
+					FM_FD_ERR_LENGTH		| \
+					FM_FD_ERR_DMA		| \
+					FM_FD_ERR_IPR		| \
+					FM_FD_ERR_IPR_TO		| \
+					FM_FD_ERR_IPR_NCSP		| \
+					FM_FD_ERR_PHYSICAL		| \
+					FM_FD_ERR_SIZE		| \
+					FM_FD_ERR_CLS_DISCARD	| \
+					FM_FD_ERR_COLOR_RED		| \
+					FM_FD_ERR_COLOR_YELLOW	| \
+					FM_FD_ERR_ILL_PLCR		| \
+					FM_FD_ERR_PLCR_FRAME_LEN	| \
+					FM_FD_ERR_EXTRACTION	| \
+					FM_FD_ERR_NO_SCHEME		| \
+					FM_FD_ERR_KEYSIZE_OVERFLOW	| \
+					FM_FD_ERR_PRS_TIMEOUT	| \
+					FM_FD_ERR_PRS_ILL_INSTRUCT	| \
+					FM_FD_ERR_PRS_HDR_ERR	| \
+					FM_FD_ERR_BLOCK_LIMIT_EXCEEDED)
+					/**< RX Error FD bits */
+
+#define FM_FD_RX_STATUS_ERR_NON_FM	0x00400000
+					/**< non Frame-Manager error */
+/* @} */
+
+/*
+ * @Description   FM Exceptions
+ */
+typedef enum e_fm_exceptions {
+	e_FM_EX_DMA_BUS_ERROR = 0,	/**< DMA bus error. */
+	e_FM_EX_DMA_READ_ECC,
+		/**< Read Buffer ECC error (Valid for FM rev < 6)*/
+	e_FM_EX_DMA_SYSTEM_WRITE_ECC,
+		/**< Write Buffer ECC error on system side
+		 * (Valid for FM rev < 6)
+		 */
+	e_FM_EX_DMA_FM_WRITE_ECC,
+		/**< Write Buffer ECC error on FM side (Valid for FM rev < 6)*/
+	e_FM_EX_DMA_SINGLE_PORT_ECC,
+		/**< Single Port ECC error on FM side (Valid for FM rev > 6)*/
+	e_FM_EX_FPM_STALL_ON_TASKS,	/**< Stall of tasks on FPM */
+	e_FM_EX_FPM_SINGLE_ECC,		/**< Single ECC on FPM. */
+	e_FM_EX_FPM_DOUBLE_ECC,
+		/**< Double ECC error on FPM ram access */
+	e_FM_EX_QMI_SINGLE_ECC,		/**< Single ECC on QMI. */
+	e_FM_EX_QMI_DOUBLE_ECC,		/**< Double bit ECC occurred on QMI */
+	e_FM_EX_QMI_DEQ_FROM_UNKNOWN_PORTID,/**< Dequeue from unknown port id */
+	e_FM_EX_BMI_LIST_RAM_ECC,	/**< Linked List RAM ECC error */
+	e_FM_EX_BMI_STORAGE_PROFILE_ECC,/**< Storage Profile ECC Error */
+	e_FM_EX_BMI_STATISTICS_RAM_ECC,
+		/**< Statistics Count RAM ECC Error Enable */
+	e_FM_EX_BMI_DISPATCH_RAM_ECC,	/**< Dispatch RAM ECC Error Enable */
+	e_FM_EX_IRAM_ECC,		/**< Double bit ECC occurred on IRAM*/
+	e_FM_EX_MURAM_ECC		/**< Double bit ECC occurred on MURAM*/
+} e_fm_exceptions;
+
+/*
+ * @Description   Enum for defining port DMA cache attributes
+ */
+typedef enum e_fm_dma_cache_option {
+	e_FM_DMA_NO_STASH = 0,	/**< Cacheable, no Allocate (No Stashing) */
+	e_FM_DMA_STASH = 1	/**< Cacheable and Allocate (Stashing on) */
+} e_fm_dma_cache_option;
+/*
+ * @Group	lnx_usr_FM_init_grp FM Initialization Unit
+ *
+ * @Description   FM Initialization Unit
+ *
+ *		  Initialization Flow
+ *		  Initialization of the FM Module will be carried out by the
+ *		  application according to the following sequence:
+ *		  -  Calling the configuration routine with basic parameters.
+ *		  -  Calling the advance initialization routines to change
+ *		     driver's defaults.
+ *		  -  Calling the initialization routine.
+ *
+ * @{
+ */
+
+t_handle fm_open(uint8_t id);
+void	fm_close(t_handle h_fm);
+
+/*
+ * @Description   A structure for defining buffer prefix area content.
+ */
+typedef struct t_fm_buffer_prefix_content {
+	uint16_t	priv_data_size;
+		/**< Number of bytes to be left at the beginning of the external
+		 * buffer Note that the private-area will start from the base of
+		 * the buffer address.
+		 */
+	bool	pass_prs_result;
+		/**< TRUE to pass the parse result to/from the FM; User may use
+		 * fm_port_get_buffer_prs_result() in order to get the
+		 * parser-result from a buffer.
+		 */
+	bool	pass_time_stamp;
+		/**< TRUE to pass the timeStamp to/from the FM User may use
+		 * fm_port_get_buffer_time_stamp() in order to get the
+		 * parser-result from a buffer.
+		 */
+	bool	pass_hash_result;
+		/**< TRUE to pass the KG hash result to/from the FM User may use
+		 * fm_port_get_buffer_hash_result() in order to get the
+		 * parser-result from a buffer.
+		 */
+	bool	pass_all_other_pcdinfo;
+		/**< Add all other Internal-Context information: AD,
+		 * hash-result, key, etc.
+		 */
+	uint16_t	data_align;
+		/**< 0 to use driver's default alignment [64], other value for
+		 * selecting a data alignment (must be a power of 2); if write
+		 * optimization is used, must be >= 16.
+		 */
+	uint8_t	manip_ext_space;
+		/**< Maximum extra size needed (insertion-size minus
+		 * removal-size);
+		 * Note that this field impacts the size of the buffer-prefix
+		 * (i.e. it pushes the data offset);
+		 */
+} t_fm_buffer_prefix_content;
+
+/*
+ * @Description   A structure of information about each of the external
+ *		  buffer pools used by a port or storage-profile.
+ */
+typedef struct t_fm_ext_pool_params {
+	uint8_t		id;	/**< External buffer pool id */
+	uint16_t	size;	/**< External buffer pool buffer size */
+} t_fm_ext_pool_params;
+
+/*
+ * @Description   A structure for informing the driver about the external
+ *		  buffer pools allocated in the BM and used by a port or a
+ *		  storage-profile.
+ */
+typedef struct t_fm_ext_pools {
+	uint8_t		num_of_pools_used;
+			/**< Number of pools use by this port*/
+	t_fm_ext_pool_params	ext_buf_pool[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+			/**< Parameters for each port */
+} t_fm_ext_pools;
+
+/*
+ * @Description   A structure for defining backup BM Pools.
+ */
+typedef struct t_fm_backup_bm_pools {
+	uint8_t	num_bkup_pools;
+			/**< Number of BM backup pools - must be smaller than
+			 * the total number of pools defined for the specified
+			 * port.
+			 */
+	uint8_t	pool_ids[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+			/**< num_bkup_pools pool id's, specifying which pools
+			 * should be used only as backup. Pool id's specified
+			 * here must be a subset of the pools used by the
+			 * specified port.
+			 */
+} t_fm_backup_bm_pools;
+
+/** @} */ /* end of lnx_usr_FM_init_grp group */
+
+/*
+ * @Group	lnx_usr_FM_runtime_control_grp FM Runtime Control Unit
+ *
+ * @Description   FM Runtime control unit API functions, definitions and enums.
+ *
+ *		  The FM driver provides a set of control routines.
+ *		  These routines may only be called after the module was fully
+ *		  initialized (both configuration and initialization routines
+ *		  were called). They are typically used to get information from
+ *		  hardware (status, counters/statistics, revision etc.), to
+ *		  modify a current state or to force/enable a required action.
+ *		  Run-time control may be called whenever necessary and as many
+ *		  times as needed.
+ * @{
+ */
+
+/*
+ * @Collection   General FM defines.
+ */
+#define FM_MAX_NUM_OF_VALID_PORTS   (FM_MAX_NUM_OF_OH_PORTS +	\
+				FM_MAX_NUM_OF_1G_RX_PORTS +	\
+				FM_MAX_NUM_OF_10G_RX_PORTS +   \
+				FM_MAX_NUM_OF_1G_TX_PORTS +	\
+				FM_MAX_NUM_OF_10G_TX_PORTS)
+				/**< Number of available FM ports */
+/* @} */
+
+/** @} */ /* end of lnx_usr_FM_runtime_control_grp group */
+/** @} */ /* end of lnx_usr_FM_lib_grp group */
+/** @} */ /* end of lnx_usr_FM_grp group */
+
+/*
+ * @Description   FM Char device ioctls
+ */
+
+/*
+ * @Group	lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+ *
+ * @Description   FM Linux ioctls definitions and enums
+ *
+ * @{
+ */
+
+/*
+ * @Collection	FM IOCTL device ('/dev') definitions
+ */
+#define DEV_FM_NAME		"fm" /**< Name of the FM chardev */
+
+#define DEV_FM_MINOR_BASE	0
+#define DEV_FM_PCD_MINOR_BASE	(DEV_FM_MINOR_BASE + 1)
+				/*/dev/fmx-pcd */
+#define DEV_FM_OH_PORTS_MINOR_BASE  (DEV_FM_PCD_MINOR_BASE + 1)
+				/*/dev/fmx-port-ohy */
+#define DEV_FM_RX_PORTS_MINOR_BASE \
+	(DEV_FM_OH_PORTS_MINOR_BASE + FM_MAX_NUM_OF_OH_PORTS)
+				/*/dev/fmx-port-rxy */
+#define DEV_FM_TX_PORTS_MINOR_BASE \
+	(DEV_FM_RX_PORTS_MINOR_BASE + FM_MAX_NUM_OF_RX_PORTS)
+				/*/dev/fmx-port-txy */
+#define DEV_FM_MAX_MINORS \
+	(DEV_FM_TX_PORTS_MINOR_BASE + FM_MAX_NUM_OF_TX_PORTS)
+
+#define FM_IOC_NUM(n)	(n)
+#define FM_PCD_IOC_NUM(n)   ((n) + 20)
+#define FM_PORT_IOC_NUM(n)  ((n) + 70)
+/* @} */
+
+#define IOC_FM_MAX_NUM_OF_PORTS	64
+
+/*
+ * @Description   Enum for defining port types
+ *		  (must match enum e_fm_port_type defined in fm_ext.h)
+ */
+typedef enum ioc_fm_port_type {
+	e_IOC_FM_PORT_TYPE_OH_OFFLINE_PARSING = 0,  /**< Offline parsing port */
+	e_IOC_FM_PORT_TYPE_RX,			/**< 1G Rx port */
+	e_IOC_FM_PORT_TYPE_RX_10G,		/**< 10G Rx port */
+	e_IOC_FM_PORT_TYPE_TX,			/**< 1G Tx port */
+	e_IOC_FM_PORT_TYPE_TX_10G,		/**< 10G Tx port */
+	e_IOC_FM_PORT_TYPE_DUMMY
+} ioc_fm_port_type;
+
+typedef struct ioc_fm_obj_t {
+	void	*obj;
+} ioc_fm_obj_t;
+
+typedef union ioc_fm_api_version_t {
+	struct {
+	uint8_t major;
+	uint8_t minor;
+	uint8_t respin;
+	uint8_t reserved;
+	} version;
+	uint32_t ver;
+} ioc_fm_api_version_t;
+
+/*
+ * @Function	  FM_IOC_GET_API_VERSION
+ *
+ * @Description   Reads the FMD IOCTL API version.
+ *
+ * @Param[in,out] ioc_fm_api_version_t		The requested counter parameters
+ *
+ * @Return	  Version's value.
+ */
+#define FM_IOC_GET_API_VERSION	\
+	_IOR(FM_IOC_TYPE_BASE, FM_IOC_NUM(7), ioc_fm_api_version_t)
+#define FMD_API_VERSION_MAJOR 21
+#define FMD_API_VERSION_MINOR 1
+#define FMD_API_VERSION_RESPIN 0
+
+uint32_t fm_get_api_version(t_handle h_fm, ioc_fm_api_version_t *p_version);
+
+
+#endif /* __FM_EXT_H */
diff --git a/drivers/net/dpaa/fmlib/fm_lib.c b/drivers/net/dpaa/fmlib/fm_lib.c
new file mode 100644
index 000000000..0d1ca1237
--- /dev/null
+++ b/drivers/net/dpaa/fmlib/fm_lib.c
@@ -0,0 +1,561 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <unistd.h>
+#include <termios.h>
+#include <sys/ioctl.h>
+#include <stdbool.h>
+#include <rte_common.h>
+
+#include "fm_ext.h"
+#include "fm_pcd_ext.h"
+#include "fm_port_ext.h"
+#include <dpaa_ethdev.h>
+
+#define DEV_TO_ID(p) \
+	do { \
+		t_device *p_dev = (t_device *)p; \
+		p = UINT_TO_PTR(p_dev->id); \
+	} while (0)
+
+/* Major and minor are in sync with FMD, respin is for fmlib identification */
+#define FM_LIB_VERSION_MAJOR	21
+#define FM_LIB_VERSION_MINOR	1
+#define FM_LIB_VERSION_RESPIN	0
+
+#if (FMD_API_VERSION_MAJOR != FM_LIB_VERSION_MAJOR) || \
+	(FMD_API_VERSION_MINOR != FM_LIB_VERSION_MINOR)
+#warning FMD and FMLIB version mismatch
+#endif
+
+t_handle
+fm_open(uint8_t id)
+{
+	t_device *p_dev;
+	int fd;
+	char dev_name[20];
+	static bool called;
+	ioc_fm_api_version_t ver;
+
+	_fml_dbg("Calling...\n");
+
+	p_dev = (t_device *)malloc(sizeof(t_device));
+	if (p_dev == NULL)
+		return NULL;
+
+	memset(dev_name, 0, 20);
+	sprintf(dev_name, "%s%s%d", "/dev/", DEV_FM_NAME, id);
+	fd = open(dev_name, O_RDWR);
+	if (fd < 0) {
+		free(p_dev);
+		return NULL;
+	}
+
+	p_dev->id = id;
+	p_dev->fd = fd;
+	if (!called) {
+		called = true;
+		fm_get_api_version((t_handle)p_dev, &ver);
+
+		if (ver.version.major != FMD_API_VERSION_MAJOR ||
+		    ver.version.minor != FMD_API_VERSION_MINOR ||
+			ver.version.respin != FMD_API_VERSION_RESPIN) {
+			DPAA_PMD_WARN("Compiled against FMD API ver %u.%u.%u",
+				      FMD_API_VERSION_MAJOR,
+				FMD_API_VERSION_MINOR, FMD_API_VERSION_RESPIN);
+			DPAA_PMD_WARN("Running with FMD API ver %u.%u.%u",
+				      ver.version.major, ver.version.minor,
+				ver.version.respin);
+		}
+	}
+	_fml_dbg("Finishing.\n");
+
+	return (t_handle)p_dev;
+}
+
+void fm_close(t_handle h_fm)
+{
+	t_device *p_dev = (t_device *)h_fm;
+
+	_fml_dbg("Calling...\n");
+
+	close(p_dev->fd);
+	free(p_dev);
+
+	_fml_dbg("Finishing.\n");
+}
+
+uint32_t
+fm_get_api_version(t_handle h_fm, ioc_fm_api_version_t *p_version)
+{
+	t_device *p_dev = (t_device *)h_fm;
+	int ret;
+
+	_fml_dbg("Calling...\n");
+
+	ret = ioctl(p_dev->fd, FM_IOC_GET_API_VERSION, p_version);
+	if (ret) {
+		DPAA_PMD_ERR("cannot get API version, error %i (%s)\n",
+			     errno, strerror(errno));
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+	}
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+t_handle
+fm_pcd_open(t_fm_pcd_params *p_fm_pcd_params)
+{
+	t_device *p_dev;
+	int fd;
+	char dev_name[20];
+
+	_fml_dbg("Calling...\n");
+
+	p_dev = (t_device *)malloc(sizeof(t_device));
+	if (p_dev == NULL)
+		return NULL;
+
+	memset(dev_name, 0, 20);
+	sprintf(dev_name, "%s%s%u-pcd", "/dev/", DEV_FM_NAME,
+		(uint32_t)((t_device *)p_fm_pcd_params->h_fm)->id);
+	fd = open(dev_name, O_RDWR);
+	if (fd < 0) {
+		free(p_dev);
+		return NULL;
+	}
+
+	p_dev->id = ((t_device *)p_fm_pcd_params->h_fm)->id;
+	p_dev->fd = fd;
+	p_dev->owners = 0;
+
+	_fml_dbg("Finishing.\n");
+
+	return (t_handle)p_dev;
+}
+
+void
+fm_pcd_close(t_handle h_fm_pcd)
+{
+	t_device *p_dev = (t_device *)h_fm_pcd;
+
+	_fml_dbg("Calling...\n");
+
+	close(p_dev->fd);
+
+	if (p_dev->owners) {
+		printf("\nTry delete a prev created pcd handler(owners:%u)!\n",
+			p_dev->owners);
+		return;
+	}
+
+	free(p_dev);
+
+	_fml_dbg("Finishing.\n");
+}
+
+uint32_t
+fm_pcd_enable(t_handle h_fm_pcd)
+{
+	t_device *p_dev = (t_device *)h_fm_pcd;
+
+	_fml_dbg("Calling...\n");
+
+	if (ioctl(p_dev->fd, FM_PCD_IOC_ENABLE))
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+uint32_t
+fm_pcd_disable(t_handle h_fm_pcd)
+{
+	t_device *p_dev = (t_device *)h_fm_pcd;
+
+	_fml_dbg("Calling...\n");
+
+	if (ioctl(p_dev->fd, FM_PCD_IOC_DISABLE))
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+t_handle
+fm_pcd_net_env_characteristics_set(t_handle h_fm_pcd,
+		ioc_fm_pcd_net_env_params_t *params)
+{
+	t_device *p_pcd_dev = (t_device *)h_fm_pcd;
+	t_device *p_dev = NULL;
+
+	_fml_dbg("Calling...\n");
+
+	params->id = NULL;
+
+	if (ioctl(p_pcd_dev->fd, FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET,
+		  params))
+		return NULL;
+
+	p_dev = (t_device *)malloc(sizeof(t_device));
+	if (p_dev == NULL)
+		return NULL;
+
+	memset(p_dev, 0, sizeof(t_device));
+	p_dev->h_user_priv = (t_handle)p_pcd_dev;
+	p_pcd_dev->owners++;
+	p_dev->id = PTR_TO_UINT(params->id);
+
+	_fml_dbg("Finishing.\n");
+
+	return (t_handle)p_dev;
+}
+
+uint32_t
+fm_pcd_net_env_characteristics_delete(t_handle h_net_env)
+{
+	t_device *p_dev = (t_device *)h_net_env;
+	t_device *p_pcd_dev = NULL;
+	ioc_fm_obj_t id;
+
+	_fml_dbg("Calling...\n");
+
+	p_pcd_dev = (t_device *)p_dev->h_user_priv;
+	id.obj = UINT_TO_PTR(p_dev->id);
+
+	if (ioctl(p_pcd_dev->fd, FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE,
+		  &id))
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+	p_pcd_dev->owners--;
+	free(p_dev);
+
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+t_handle
+fm_pcd_kg_scheme_set(t_handle h_fm_pcd,
+		     ioc_fm_pcd_kg_scheme_params_t *params)
+{
+	t_device *p_pcd_dev = (t_device *)h_fm_pcd;
+	t_device *p_dev = NULL;
+	int ret;
+
+	_fml_dbg("Calling...\n");
+
+	params->id = NULL;
+
+	if (params->param.modify) {
+		if (params->param.scm_id.scheme_id)
+			DEV_TO_ID(params->param.scm_id.scheme_id);
+		else
+			return NULL;
+	}
+
+	/* correct h_net_env param from scheme */
+	if (params->param.net_env_params.net_env_id)
+		DEV_TO_ID(params->param.net_env_params.net_env_id);
+
+	/* correct next engine params handlers: cc*/
+	if (params->param.next_engine == e_IOC_FM_PCD_CC &&
+	    params->param.kg_next_engine_params.cc.tree_id)
+		DEV_TO_ID(params->param.kg_next_engine_params.cc.tree_id);
+
+	ret = ioctl(p_pcd_dev->fd, FM_PCD_IOC_KG_SCHEME_SET, params);
+	if (ret) {
+		DPAA_PMD_ERR("  cannot set kg scheme, error %i (%s)\n",
+			     errno, strerror(errno));
+		return NULL;
+	}
+
+	p_dev = (t_device *)malloc(sizeof(t_device));
+	if (p_dev == NULL)
+		return NULL;
+
+	memset(p_dev, 0, sizeof(t_device));
+	p_dev->h_user_priv = (t_handle)p_pcd_dev;
+	/* increase owners only if a new scheme is created */
+	if (!params->param.modify)
+		p_pcd_dev->owners++;
+	p_dev->id = PTR_TO_UINT(params->id);
+
+	_fml_dbg("Finishing.\n");
+
+	return (t_handle)p_dev;
+}
+
+uint32_t
+fm_pcd_kg_scheme_delete(t_handle h_scheme)
+{
+	t_device *p_dev = (t_device *)h_scheme;
+	t_device *p_pcd_dev = NULL;
+	ioc_fm_obj_t id;
+
+	_fml_dbg("Calling...\n");
+
+	p_pcd_dev =  (t_device *)p_dev->h_user_priv;
+	id.obj = UINT_TO_PTR(p_dev->id);
+
+	if (ioctl(p_pcd_dev->fd, FM_PCD_IOC_KG_SCHEME_DELETE, &id)) {
+		DPAA_PMD_WARN("cannot delete kg scheme, error %i (%s)\n",
+			      errno, strerror(errno));
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+	}
+
+	p_pcd_dev->owners--;
+	free(p_dev);
+
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+typedef struct {
+	e_fm_port_type	port_type;	/**< Port type */
+	uint8_t		port_id;	/**< Port Id - relative to type */
+} t_fm_port;
+
+t_handle
+fm_port_open(t_fm_port_params *p_fm_port_params)
+{
+	t_device *p_dev;
+	int fd;
+	char dev_name[30];
+	t_fm_port *p_fm_port;
+
+	_fml_dbg("Calling...\n");
+
+	p_dev = (t_device *)malloc(sizeof(t_device));
+	if (p_dev == NULL)
+		return NULL;
+
+	memset(p_dev, 0, sizeof(t_device));
+
+	p_fm_port = (t_fm_port *)malloc(sizeof(t_fm_port));
+	if (!p_fm_port) {
+		free(p_dev);
+		return NULL;
+	}
+	memset(p_fm_port, 0, sizeof(t_fm_port));
+	memset(dev_name, 0, sizeof(dev_name));
+	switch (p_fm_port_params->port_type) {
+	case e_FM_PORT_TYPE_OH_OFFLINE_PARSING:
+		sprintf(dev_name, "%s%s%u-port-oh%d", "/dev/", DEV_FM_NAME,
+			(uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+			p_fm_port_params->port_id);
+		break;
+	case e_FM_PORT_TYPE_RX:
+		sprintf(dev_name, "%s%s%u-port-rx%d", "/dev/", DEV_FM_NAME,
+			(uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+			p_fm_port_params->port_id);
+		break;
+	case e_FM_PORT_TYPE_RX_10G:
+		sprintf(dev_name, "%s%s%u-port-rx%d", "/dev/", DEV_FM_NAME,
+			(uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+			FM_MAX_NUM_OF_1G_RX_PORTS + p_fm_port_params->port_id);
+		break;
+	case e_FM_PORT_TYPE_TX:
+		sprintf(dev_name, "%s%s%u-port-tx%d", "/dev/", DEV_FM_NAME,
+			(uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+			p_fm_port_params->port_id);
+		break;
+	case e_FM_PORT_TYPE_TX_10G:
+		sprintf(dev_name, "%s%s%u-port-tx%d", "/dev/", DEV_FM_NAME,
+			(uint32_t)((t_device *)p_fm_port_params->h_fm)->id,
+			FM_MAX_NUM_OF_1G_TX_PORTS + p_fm_port_params->port_id);
+		break;
+	default:
+		free(p_fm_port);
+		free(p_dev);
+		return NULL;
+	}
+
+	fd = open(dev_name, O_RDWR);
+	if (fd < 0) {
+		free(p_fm_port);
+		free(p_dev);
+		return NULL;
+	}
+
+	p_fm_port->port_type = p_fm_port_params->port_type;
+	p_fm_port->port_id = p_fm_port_params->port_id;
+	p_dev->id = p_fm_port_params->port_id;
+	p_dev->fd = fd;
+	p_dev->h_user_priv = (t_handle)p_fm_port;
+
+	_fml_dbg("Finishing.\n");
+
+	return (t_handle)p_dev;
+}
+
+void
+fm_port_close(t_handle h_fm_port)
+{
+	t_device *p_dev = (t_device *)h_fm_port;
+
+	_fml_dbg("Calling...\n");
+
+	close(p_dev->fd);
+	if (p_dev->h_user_priv)
+		free(p_dev->h_user_priv);
+	free(p_dev);
+
+	_fml_dbg("Finishing.\n");
+}
+
+uint32_t
+fm_port_disable(t_handle h_fm_port)
+{
+	t_device *p_dev = (t_device *)h_fm_port;
+
+	_fml_dbg("Calling...\n");
+
+	if (ioctl(p_dev->fd, FM_PORT_IOC_DISABLE))
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+uint32_t
+fm_port_enable(t_handle h_fm_port)
+{
+	t_device *p_dev = (t_device *)h_fm_port;
+
+	_fml_dbg("Calling...\n");
+
+	if (ioctl(p_dev->fd, FM_PORT_IOC_ENABLE))
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+uint32_t
+fm_port_set_pcd(t_handle h_fm_port,
+		ioc_fm_port_pcd_params_t *p)
+{
+	t_device *p_dev = (t_device *)h_fm_port;
+
+	_fml_dbg("Calling...\n");
+
+	/* correct h_net_env param from t_fm_portPcdParams */
+	DEV_TO_ID(p->net_env_id);
+
+	/* correct pcd structures according to what support was set */
+	if (p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC ||
+		p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC_AND_PLCR ||
+		p->pcd_support == e_IOC_FM_PCD_PRS_CC) {
+		if (p->p_cc_params && p->p_cc_params->cc_tree_id)
+			DEV_TO_ID(p->p_cc_params->cc_tree_id);
+		else
+			DPAA_PMD_WARN("Coarse Classification not set !");
+	}
+
+	if (p->pcd_support == e_IOC_FM_PCD_PRS_KG ||
+		p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC ||
+		p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC_AND_PLCR ||
+		p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_PLCR){
+		if (p->p_kg_params) {
+			uint32_t i;
+			ioc_fm_port_pcd_kg_params_t *kg_params;
+
+			kg_params = p->p_kg_params;
+
+			for (i = 0; i < kg_params->num_schemes; i++)
+				if (kg_params->scheme_ids[i])
+					DEV_TO_ID(kg_params->scheme_ids[i]);
+				else
+					DPAA_PMD_WARN("Scheme:%u not set!!", i);
+
+			if (kg_params->direct_scheme)
+				DEV_TO_ID(kg_params->direct_scheme_id);
+		} else {
+			DPAA_PMD_WARN("KeyGen not set !");
+		}
+	}
+
+	if (p->pcd_support == e_IOC_FM_PCD_PLCR_ONLY ||
+		p->pcd_support == e_IOC_FM_PCD_PRS_PLCR ||
+		p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_CC_AND_PLCR ||
+		p->pcd_support == e_IOC_FM_PCD_PRS_KG_AND_PLCR) {
+		if (p->p_plcr_params) {
+			if (p->p_plcr_params->plcr_profile_id)
+				DEV_TO_ID(p->p_plcr_params->plcr_profile_id);
+			else
+				DPAA_PMD_WARN("Policer not set !");
+		}
+	}
+
+	if (p->p_ip_reassembly_manip)
+		DEV_TO_ID(p->p_ip_reassembly_manip);
+
+	if (p->p_capwap_reassembly_manip)
+		DEV_TO_ID(p->p_capwap_reassembly_manip);
+
+	if (ioctl(p_dev->fd, FM_PORT_IOC_SET_PCD, p))
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+uint32_t
+fm_port_delete_pcd(t_handle h_fm_port)
+{
+	t_device *p_dev = (t_device *)h_fm_port;
+
+	_fml_dbg("Calling...\n");
+
+	if (ioctl(p_dev->fd, FM_PORT_IOC_DELETE_PCD))
+		RETURN_ERROR(MINOR, E_INVALID_OPERATION, NO_MSG);
+
+	_fml_dbg("Finishing.\n");
+
+	return E_OK;
+}
+
+t_handle
+create_device(t_handle h_user_priv, t_handle h_dev_id)
+{
+	t_device *p_user_priv_dev = (t_device *)h_user_priv;
+	t_device *p_dev = NULL;
+
+	_fml_dbg("Calling...\n");
+
+	p_dev = (t_device *)malloc(sizeof(t_device));
+	if (p_dev == NULL)
+		return NULL;
+
+	memset(p_dev, 0, sizeof(t_device));
+	p_dev->h_user_priv = h_user_priv;
+	p_user_priv_dev->owners++;
+	p_dev->id = PTR_TO_UINT(h_dev_id);
+
+	_fml_dbg("Finishing.\n");
+
+	return (t_handle)p_dev;
+}
+
+t_handle
+get_device_id(t_handle h_dev)
+{
+	t_device *p_dev = (t_device *)h_dev;
+
+	return (t_handle)p_dev->id;
+}
diff --git a/drivers/net/dpaa/fmlib/fm_pcd_ext.h b/drivers/net/dpaa/fmlib/fm_pcd_ext.h
new file mode 100644
index 000000000..e767fbb70
--- /dev/null
+++ b/drivers/net/dpaa/fmlib/fm_pcd_ext.h
@@ -0,0 +1,5787 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_PCD_EXT_H
+#define __FM_PCD_EXT_H
+
+#include "ncsw_ext.h"
+#include "net_ext.h"
+#include "fm_ext.h"
+
+/*
+ * @Description	  FM PCD ...
+ * @Group	  lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+ * @Description	  Frame Manager Linux ioctls definitions and enums
+ * @{
+ */
+
+/*
+ * @Group	  lnx_ioctl_FM_PCD_grp FM PCD
+ * @Description	  Frame Manager PCD API functions, definitions and enums
+ *
+ *		  The FM PCD module is responsible for the initialization of all
+ *		  global classifying FM modules. This includes the parser
+ *		  general and common registers, the key generator global and
+ *		  common registers, and the policer global and common registers.
+ *		  In addition, the FM PCD SW module will initialize all required
+ *		  key generator schemes, coarse classification flows, and
+ *		  policer profiles. When an FM module is configured to work with
+ *		  one of these entities, it will register to it using the FM
+ *		  PORT API. The PCD module will manage the PCD resources - i.e.
+ *		  resource management of KeyGen schemes, etc.
+ *
+ * @{
+ */
+
+/*
+ * @Collection	General PCD defines
+ */
+#define IOC_FM_PCD_MAX_NUM_OF_PRIVATE_HDRS		2
+/**< Number of units/headers saved for user */
+
+#define IOC_FM_PCD_PRS_NUM_OF_HDRS			16
+/**< Number of headers supported by HW parser */
+#define IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS \
+	(32 - IOC_FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
+/**< Number of distinction units is limited by register size (32 bits) minus
+ * reserved bits for private headers.
+ */
+#define IOC_FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS	4
+/**< Maximum number of interchangeable headers in a distinction unit */
+#define IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS		8
+/**< Total number of generic KeyGen registers */
+#define IOC_FM_PCD_KG_MAX_EXTRACTS_PER_KEY	35
+/**< Max number allowed on any configuration; For HW implementation reasons,
+ * in most cases less than this will be allowed; The driver will return an
+ * initialization error if resource is unavailable.
+ */
+#define IOC_FM_PCD_KG_NUM_OF_EXTRACT_MASKS		4
+/**< Total number of masks allowed on KeyGen extractions. */
+#define IOC_FM_PCD_KG_NUM_OF_DEFAULT_GROUPS		16
+/**< Number of default value logical groups */
+#define IOC_FM_PCD_PRS_NUM_OF_LABELS			32
+/**< Maximum number of SW parser labels */
+#define IOC_FM_PCD_SW_PRS_SIZE			0x00000800
+/**< Total size of SW parser area */
+
+#define IOC_FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE	128
+/**< Maximum size of insertion template for insert manipulation */
+
+#define IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES	64
+/**< Maximum possible entries for frame replicator group */
+/* @} */
+
+/*
+ * @Group	  lnx_ioctl_FM_PCD_init_grp FM PCD Initialization Unit
+ *
+ * @Description   Frame Manager PCD Initialization Unit API
+ *
+ * @{
+ */
+
+/*
+ * @Description   PCD counters
+ *		  (must match enum ioc_fm_pcd_counters defined in fm_pcd_ext.h)
+ */
+typedef enum ioc_fm_pcd_counters {
+	e_IOC_FM_PCD_KG_COUNTERS_TOTAL,		/**< KeyGen counter */
+	e_IOC_FM_PCD_PLCR_COUNTERS_RED,
+	/**< Policer counter - counts the total number of RED packets that exit
+	 * the Policer.
+	 */
+	e_IOC_FM_PCD_PLCR_COUNTERS_YELLOW,
+	/**< Policer counter - counts the total number of YELLOW packets that
+	 * exit the Policer.
+	 */
+	e_IOC_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED,
+	/**< Policer counter - counts the number of packets that changed color
+	 * to RED by the Policer; This is a subset of
+	 * e_IOC_FM_PCD_PLCR_COUNTERS_RED packet count, indicating active color
+	 * changes.
+	 */
+	e_IOC_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW,
+	/**< Policer counter - counts the number of packets that changed color
+	 * to YELLOW by the Policer; This is a subset of
+	 * e_IOC_FM_PCD_PLCR_COUNTERS_YELLOW packet count, indicating active
+	 * color changes.
+	 */
+	e_IOC_FM_PCD_PLCR_COUNTERS_TOTAL,
+	/**< Policer counter - counts the total number of packets passed in the
+	 * Policer.
+	 */
+	e_IOC_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH,
+	/**< Policer counter - counts the number of packets with length
+	 * mismatch.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH,
+	/**< Parser counter - counts the number of times the parser block is
+	 * dispatched.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED,
+	/**< Parser counter - counts the number of times L2 parse result is
+	 * returned (including errors).
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED,
+	/**< Parser counter - counts the number of times L3 parse result is
+	 * returned (including errors).
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED,
+	/**< Parser counter - counts the number of times L4 parse result is
+	 * returned (including errors).
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED,
+	/**< Parser counter - counts the number of times SHIM parse result is
+	 * returned (including errors).
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR,
+	/**< Parser counter - counts the number of times L2 parse result is
+	 * returned with errors.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR,
+	/**< Parser counter - counts the number of times L3 parse result is
+	 * returned with errors.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR,
+	/**< Parser counter - counts the number of times L4 parse result is
+	 * returned with errors.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR,
+	/**< Parser counter - counts the number of times SHIM parse result is
+	 * returned with errors.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES,
+	/**< Parser counter - counts the number of cycles spent executing soft
+	 * parser instruction (including stall cycles).
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES,
+	/**< Parser counter - counts the number of cycles stalled waiting for
+	 * parser internal memory reads while executing soft parser instruction.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES,
+	/**< Parser counter - counts the number of cycles spent executing hard
+	 * parser (including stall cycles).
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES,
+	/**< MURAM counter - counts the number of cycles while performing FMan
+	 * Memory read.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES,
+	/**< MURAM counter - counts the number of cycles stalled while
+	 * performing FMan Memory read.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES,
+	/**< MURAM counter - counts the number of cycles while performing FMan
+	 * Memory write.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES,
+	/**< MURAM counter - counts the number of cycles stalled while
+	 * performing FMan Memory write.
+	 */
+	e_IOC_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES
+	/**< FPM counter - counts the number of cycles stalled while performing
+	 * a FPM Command.
+	 */
+} ioc_fm_pcd_counters;
+
+/*
+ * @Description   PCD interrupts
+ *		  (must match enum ioc_fm_pcd_exceptions defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef enum ioc_fm_pcd_exceptions {
+	e_IOC_FM_PCD_KG_EXCEPTION_DOUBLE_ECC,
+	/**< KeyGen double-bit ECC error is detected on internal memory read
+	 * access.
+	 */
+	e_IOC_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW,
+	/**< KeyGen scheme configuration error indicating a key size larger than
+	 * 56 bytes.
+	 */
+	e_IOC_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC,
+	/**< Policer double-bit ECC error has been detected on PRAM read access.
+	 */
+	e_IOC_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR,
+	/**< Policer access to a non-initialized profile has been detected. */
+	e_IOC_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE,
+	/**< Policer RAM self-initialization complete */
+	e_IOC_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE,
+	/**< Policer atomic action complete */
+	e_IOC_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC,
+	/**< Parser double-bit ECC error */
+	e_IOC_FM_PCD_PRS_EXCEPTION_SINGLE_ECC
+	/**< Parser single-bit ECC error */
+} ioc_fm_pcd_exceptions;
+
+/** @} */ /* end of lnx_ioctl_FM_PCD_init_grp group */
+
+/*
+ * @Group	  lnx_ioctl_FM_PCD_Runtime_grp FM PCD Runtime Unit
+ *
+ * @Description   Frame Manager PCD Runtime Unit
+ *
+ *		  The runtime control allows creation of PCD infrastructure
+ *		  modules such as Network Environment Characteristics,
+ *		  Classification Plan Groups and Coarse Classification Trees.
+ *		  It also allows on-the-fly initialization, modification and
+ *		  removal of PCD modules such as KeyGen schemes, coarse
+ *		  classification nodes and Policer profiles.
+ *
+ *		  In order to explain the programming model of the PCD driver
+ *		  interface a few terms should be explained, and will be used
+ *		  below.
+ *		  - Distinction Header - One of the 16 protocols supported by
+ *		    the FM parser, or one of the SHIM headers (1 or 2). May be a
+ *		    header with a special option (see below).
+ *		  - Interchangeable Headers Group - This is a group of Headers
+ *		    recognized by either one of them. For example, if in a
+ *		    specific context the user chooses to treat IPv4 and IPV6 in
+ *		    the same way, they may create an interchangeable Headers
+ *		    Unit consisting of these 2 headers.
+ *		  - A Distinction Unit - a Distinction Header or an
+ *		    Interchangeable Headers Group.
+ *		  - Header with special option - applies to Ethernet, MPLS,
+ *		    VLAN, IPv4 and IPv6, includes multicast, broadcast and other
+ *		    protocol specific options. In terms of hardware it relates
+ *		    to the options available in the classification plan.
+ *		  - Network Environment Characteristics - a set of Distinction
+ *		    Units that define the total recognizable header selection
+ *		    for a certain environment. This is NOT the list of all
+ *		    headers that will ever appear in a flow, but rather
+ *		    everything that needs distinction in a flow, where
+ *		    distinction is made by KeyGen schemes and coarse
+ *		    classification action descriptors.
+ *
+ *		  The PCD runtime modules initialization is done in stages. The
+ *		  first stage after initializing the PCD module itself is to
+ *		  establish a Network Flows Environment Definition. The
+ *		  application may choose to establish one or more such
+ *		  environments. Later, when needed, the application will have to
+ *		  state, for some of its modules, to which single environment it
+ *		  belongs.
+ *
+ * @{
+ */
+
+/*
+ * @Description   structure for FM counters
+ */
+typedef struct ioc_fm_pcd_counters_params_t {
+	ioc_fm_pcd_counters cnt;	/**< The requested counter */
+	uint32_t	val;
+			/**< The requested value to get/set from/into the
+			 * counter
+			 */
+} ioc_fm_pcd_counters_params_t;
+
+/*
+ * @Description   structure for FM exception definitios
+ */
+typedef struct ioc_fm_pcd_exception_params_t {
+	ioc_fm_pcd_exceptions exception;	/**< The requested exception */
+	bool		enable;
+			/**< TRUE to enable interrupt, FALSE to mask it. */
+} ioc_fm_pcd_exception_params_t;
+
+/*
+ * @Description   A structure for SW parser labels (must be identical to struct
+ *		  t_fm_pcd_prs_label_params defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_label_params_t {
+	uint32_t instruction_offset;
+		/**< SW parser label instruction offset (2 bytes resolution),
+		 * relative to Parser RAM
+		 */
+	ioc_net_header_type	hdr;
+		/**< The existence of this header will invoke the SW parser
+		 * code.
+		 */
+	uint8_t	index_per_hdr;
+		/**< Normally 0, if more than one SW parser attachments for the
+		 * same header, use this index to distinguish between them.
+		 */
+} ioc_fm_pcd_prs_label_params_t;
+
+/*
+ * @Description   A structure for SW parser (Must match struct
+ *		  ioc_fm_pcd_prs_sw_params_t defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_sw_params_t {
+	bool		override;
+			/**< FALSE to invoke a check that nothing else was
+			 * loaded to this address, including internal patches.
+			 * TRUE to override any existing code.
+			 */
+	uint32_t	size;		/**< SW parser code size */
+	uint16_t	base;
+			/**< SW parser base (in instruction counts! must be
+			 * larger than 0x20)
+			 */
+	uint8_t		*p_code;	/**< SW parser code */
+	uint32_t	sw_prs_data_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
+					/**< SW parser data (parameters) */
+	uint8_t		num_of_labels;	/**< Number of labels for SW parser. */
+	ioc_fm_pcd_prs_label_params_t
+			labels_table[IOC_FM_PCD_PRS_NUM_OF_LABELS];
+			/**< SW parser labels table, containing num_of_labels
+			 * entries
+			 */
+} ioc_fm_pcd_prs_sw_params_t;
+
+/*
+ * @Description   A structure to set the a KeyGen default value
+ */
+typedef struct ioc_fm_pcd_kg_dflt_value_params_t {
+	uint8_t		value_id;/**< 0,1 - one of 2 global default values */
+	uint32_t	value;	/**< The requested default value */
+} ioc_fm_pcd_kg_dflt_value_params_t;
+
+/*
+ * @Function	  fm_pcd_enable
+ *
+ * @Description   This routine should be called after PCD is initialized for
+ *		  enabling all PCD engines according to their existing
+ *		  configuration.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_ENABLE  _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(1))
+
+/*
+ * @Function	  fm_pcd_disable
+ *
+ * @Description   This routine may be called when PCD is enabled in order to
+ *		  disable all PCD engines. It may be called only when none of
+ *		  the ports in the system are using the PCD.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only when PCD is enabled.
+ */
+#define FM_PCD_IOC_DISABLE  _IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(2))
+
+/*
+ * @Function	  fm_pcd_prs_load_sw
+ *
+ * @Description   This routine may be called only when all ports in the
+ *		  system are actively using the classification plan scheme.
+ *		  In such cases it is recommended in order to save resources.
+ *		  The driver automatically saves 8 classification plans for
+ *		  ports that do NOT use the classification plan mechanism, to
+ *		  avoid this (in order to save those entries) this routine may
+ *		  be called.
+ *
+ * @Param[in]	  ioc_fm_pcd_prs_sw_params_t
+ *		  A pointer to the image of the software parser code.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_PRS_LOAD_SW \
+	_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(3), ioc_fm_pcd_prs_sw_params_t)
+
+/*
+ * @Function	  fm_pcd_kg_set_dflt_value
+ *
+ * @Description   Calling this routine sets a global default value to be used
+ *		  by the KeyGen when parser does not recognize a required
+ *		  field/header.
+ *		  By default default values are 0.
+ *
+ * @Param[in]	  ioc_fm_pcd_kg_dflt_value_params_t	A pointer to a structure
+ *							with the relevant
+ *							parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_KG_SET_DFLT_VALUE \
+	_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(6), \
+	     ioc_fm_pcd_kg_dflt_value_params_t)
+
+/*
+ * @Function	  fm_pcd_kg_set_additional_data_after_parsing
+ *
+ * @Description   Calling this routine allows the keygen to access data past
+ *		  the parser finishing point.
+ *
+ * @Param[in]	  uint8_t	payload-offset; the number of bytes beyond the
+ *				parser location.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_KG_SET_ADDITIONAL_DATA_AFTER_PARSING \
+	_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(7), uint8_t)
+
+/*
+ * @Function	  fm_pcd_set_exception
+ *
+ * @Description   Calling this routine enables/disables PCD interrupts.
+ *
+ * @Param[in]	  ioc_fm_pcd_exception_params_t
+ *		  Arguments struct with exception to be enabled/disabled.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_SET_EXCEPTION \
+	_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(8), ioc_fm_pcd_exception_params_t)
+
+/*
+ * @Function	  fm_pcd_get_counter
+ *
+ * @Description   Reads one of the FM PCD counters.
+ *
+ * @Param[in,out] ioc_fm_pcd_counters_params_t The requested counter parameters.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  It is user's responsibility to call this routine only
+ *		  for enabled counters, and there will be no indication if a
+ *		  disabled counter is accessed.
+ */
+#define FM_PCD_IOC_GET_COUNTER \
+	_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(9), ioc_fm_pcd_counters_params_t)
+
+/*
+ * @Function	  fm_pcd_kg_scheme_get_counter
+ *
+ * @Description   Reads scheme packet counter.
+ *
+ * @Param[in]	  h_scheme	scheme handle as returned by
+ *				fm_pcd_kg_scheme_set().
+ *
+ * @Return	  Counter's current value.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() & fm_pcd_kg_scheme_set().
+ */
+#define FM_PCD_IOC_KG_SCHEME_GET_CNTR \
+	_IOR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(4), ioc_fm_pcd_kg_scheme_spc_t)
+
+/*
+ * @Function	  FM_PCD_ForceIntr
+ *
+ * @Description   Causes an interrupt event on the requested source.
+ *
+ * @Param[in]	  ioc_fm_pcd_exceptions - An exception to be forced.
+ *
+ * @Return	  0 on success; error code if the exception is not enabled,
+ *		  or is not able to create interrupt.
+ */
+#define FM_PCD_IOC_FORCE_INTR \
+	_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(11), ioc_fm_pcd_exceptions)
+
+/*
+ * @Collection	Definitions of coarse classification parameters as required by
+ *		KeyGen (when coarse classification is the next engine after this
+ *		scheme).
+ */
+#define IOC_FM_PCD_MAX_NUM_OF_CC_TREES		8
+#define IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS		16
+#define IOC_FM_PCD_MAX_NUM_OF_CC_UNITS		4
+#define IOC_FM_PCD_MAX_NUM_OF_KEYS		256
+#define IOC_FM_PCD_MAX_NUM_OF_FLOWS		(4 * KILOBYTE)
+#define IOC_FM_PCD_MAX_SIZE_OF_KEY		56
+#define IOC_FM_PCD_MAX_CC_ENTRY_IN_GRP		16
+#define IOC_FM_PCD_LAST_KEY_INDEX		0xffff
+#define IOC_FM_PCD_MANIP_DSCP_VALUES		64
+/* @} */
+
+/*
+ * @Collection	A set of definitions to allow protocol
+ *		special option description.
+ */
+typedef uint32_t		ioc_protocol_opt_t;
+		/**< A general type to define a protocol option. */
+
+typedef ioc_protocol_opt_t  ioc_eth_protocol_opt_t;
+			/**< Ethernet protocol options. */
+#define IOC_ETH_BROADCAST		0x80000000   /**< Ethernet Broadcast. */
+#define IOC_ETH_MULTICAST		0x40000000   /**< Ethernet Multicast. */
+
+typedef ioc_protocol_opt_t  ioc_vlan_protocol_opt_t;
+				/**< Vlan protocol options. */
+#define IOC_VLAN_STACKED		0x20000000   /**< Stacked VLAN. */
+
+typedef ioc_protocol_opt_t  ioc_mpls_protocol_opt_t;
+				/**< MPLS protocol options. */
+#define IOC_MPLS_STACKED		0x10000000   /**< Stacked MPLS. */
+
+typedef ioc_protocol_opt_t  ioc_ipv4_protocol_opt_t;
+			/**< IPv4 protocol options. */
+#define IOC_IPV4_BROADCAST_1		0x08000000   /**< IPv4 Broadcast. */
+#define IOC_IPV4_MULTICAST_1		0x04000000   /**< IPv4 Multicast. */
+#define IOC_IPV4_UNICAST_2		0x02000000
+					/**< Tunneled IPv4 - Unicast.
+					 */
+#define IOC_IPV4_MULTICAST_BROADCAST_2  0x01000000
+					/**< Tunneled IPv4 -
+					 * Broadcast/Multicast.
+					 */
+
+#define IOC_IPV4_FRAG_1		0x00000008
+				/**< IPV4 reassembly option. IPV4
+				 * Reassembly manipulation requires network
+				 * environment with IPV4 header and IPV4_FRAG_1
+				 * option
+				 */
+
+typedef ioc_protocol_opt_t  ioc_ipv6_protocol_opt_t;
+					/**< IPv6 protocol options. */
+#define IOC_IPV6_MULTICAST_1		0x00800000   /**< IPv6 Multicast. */
+#define IOC_IPV6_UNICAST_2		0x00400000
+					/**< Tunneled IPv6 - Unicast. */
+#define IOC_IPV6_MULTICAST_2		0x00200000
+					/**< Tunneled IPv6 - Multicast. */
+
+#define IOC_IPV6_FRAG_1		0x00000004
+				/**< IPV6 reassembly option. IPV6 Reassembly
+				 * manipulation requires network environment
+				 * with IPV6 header and IPV6_FRAG_1 option
+				 */
+typedef ioc_protocol_opt_t   ioc_capwap_protocol_opt_t;
+					/**< CAPWAP protocol options. */
+#define CAPWAP_FRAG_1		0x00000008
+				/**< CAPWAP reassembly option. CAPWAP Reassembly
+				 * manipulation requires network environment
+				 * with CAPWAP header and CAPWAP_FRAG_1 option;
+				 * in case where fragment found, the
+				 * fragment-extension offset may be found at
+				 * 'shim2' (in parser-result).
+				 */
+
+/* @} */
+
+#define IOC_FM_PCD_MANIP_MAX_HDR_SIZE		256
+#define IOC_FM_PCD_MANIP_DSCP_TO_VLAN_TRANS	64
+/**
+ * @Collection	A set of definitions to support Header Manipulation selection.
+ */
+typedef uint32_t			ioc_hdr_manip_flags_t;
+	/**< A general type to define a HMan update command flags. */
+
+typedef ioc_hdr_manip_flags_t	ioc_ipv4_hdr_manip_update_flags_t;
+	/**< IPv4 protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_IPV4_TOS	0x80000000
+			/**< update TOS with the given value ('tos' field of
+			 * ioc_fm_pcd_manip_hdr_field_update_ipv4_t)
+			 */
+#define IOC_HDR_MANIP_IPV4_ID	0x40000000
+			/**< update IP ID with the given value ('id' field of
+			 * ioc_fm_pcd_manip_hdr_field_update_ipv4_t)
+			 */
+#define IOC_HDR_MANIP_IPV4_TTL	0x20000000	/**< Decrement TTL by 1 */
+#define IOC_HDR_MANIP_IPV4_SRC	0x10000000
+		/**< update IP source address with the given value ('src' field
+		 * of ioc_fm_pcd_manip_hdr_field_update_ipv4_t)
+		 */
+#define IOC_HDR_MANIP_IPV4_DST	0x08000000
+		/**< update IP destination address with the given value
+		 * ('dst' field of ioc_fm_pcd_manip_hdr_field_update_ipv4_t)
+		 */
+
+typedef ioc_hdr_manip_flags_t	ioc_ipv6_hdr_manip_update_flags_t;
+			/**< IPv6 protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_IPV6_TC	0x80000000
+	/**< update Traffic Class address with the given value ('traffic_class'
+	 * field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t)
+	 */
+#define IOC_HDR_MANIP_IPV6_HL	0x40000000	/**< Decrement Hop Limit by 1 */
+#define IOC_HDR_MANIP_IPV6_SRC	0x20000000
+		/**< update IP source address with the given value ('src' field
+		 * of ioc_fm_pcd_manip_hdr_field_update_ipv6_t)
+		 */
+#define IOC_HDR_MANIP_IPV6_DST	0x10000000
+		/**< update IP destination address with the given value ('dst'
+		 * field of ioc_fm_pcd_manip_hdr_field_update_ipv6_t)
+		 */
+
+typedef ioc_hdr_manip_flags_t	ioc_tcp_udp_hdr_manip_update_flags_t;
+		/**< TCP/UDP protocol HMan update command flags. */
+
+#define IOC_HDR_MANIP_TCP_UDP_SRC	0x80000000
+		/**< update TCP/UDP source address with the given value
+		 * ('src' field of ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t)
+		 */
+#define IOC_HDR_MANIP_TCP_UDP_DST	0x40000000
+		/**< update TCP/UDP destination address with the given value
+		 * ('dst' field of ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t)
+		 */
+#define IOC_HDR_MANIP_TCP_UDP_CHECKSUM  0x20000000
+		/**< update TCP/UDP checksum */
+
+/* @} */
+
+/*
+ * @Description   A type used for returning the order of the key extraction.
+ *		  each value in this array represents the index of the
+ *		  extraction command as defined by the user in the
+ *		  initialization extraction array. The valid size of this array
+ *		  is the user define number of extractions required (also
+ *		  marked by the second '0' in this array).
+ */
+typedef	uint8_t
+	ioc_fm_pcd_kg_key_order_t [IOC_FM_PCD_KG_MAX_EXTRACTS_PER_KEY];
+
+/*
+ *@Description   All PCD engines
+ *		(must match enum e_FmPcdEngine defined in fm_pcd_ext.h)
+ */
+
+typedef enum ioc_fm_pcd_engine {
+	e_IOC_FM_PCD_INVALID = 0,   /**< Invalid PCD engine */
+	e_IOC_FM_PCD_DONE,	/**< No PCD Engine indicated */
+	e_IOC_FM_PCD_KG,		/**< KeyGen */
+	e_IOC_FM_PCD_CC,		/**< Coarse Classifier */
+	e_IOC_FM_PCD_PLCR,	/**< Policer */
+	e_IOC_FM_PCD_PRS,	/**< Parser */
+	e_IOC_FM_PCD_FR,	/**< Frame Replicator */
+	e_IOC_FM_PCD_HASH	/**< Hash Table */
+} ioc_fm_pcd_engine;
+
+/*
+ * @Description   An enum for selecting extraction by header types
+ *		  (Must match enum e_FmPcdExtractByHdrType defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef enum ioc_fm_pcd_extract_by_hdr_type {
+	e_IOC_FM_PCD_EXTRACT_FROM_HDR,	/**< Extract bytes from header */
+	e_IOC_FM_PCD_EXTRACT_FROM_FIELD,/**< Extract bytes from header field */
+	e_IOC_FM_PCD_EXTRACT_FULL_FIELD	/**< Extract a full field */
+} ioc_fm_pcd_extract_by_hdr_type;
+
+/*
+ * @Description   An enum for selecting extraction source (when it is not the
+ *		  header) (Must match enum e_FmPcdExtractFrom defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef enum ioc_fm_pcd_extract_from {
+	e_IOC_FM_PCD_EXTRACT_FROM_FRAME_START,
+			/**< KG & CC: Extract from beginning of frame */
+	e_IOC_FM_PCD_EXTRACT_FROM_DFLT_VALUE,
+				/**< KG only: Extract from a default value */
+	e_IOC_FM_PCD_EXTRACT_FROM_CURR_END_OF_PARSE,
+			/**< KG only: Extract from the point where parsing had
+			 * finished
+			 */
+	e_IOC_FM_PCD_EXTRACT_FROM_KEY,	/**< CC only: Field where saved KEY */
+	e_IOC_FM_PCD_EXTRACT_FROM_HASH,	/**< CC only: Field where saved HASH */
+	e_IOC_FM_PCD_EXTRACT_FROM_PARSE_RESULT,
+				/**< KG & CC: Extract from the parser result */
+	e_IOC_FM_PCD_EXTRACT_FROM_ENQ_FQID,
+				/**< KG & CC: Extract from enqueue FQID */
+	e_IOC_FM_PCD_EXTRACT_FROM_FLOW_ID
+				/**< CC only: Field where saved Dequeue FQID */
+} ioc_fm_pcd_extract_from;
+
+/*
+ * @Description   An enum for selecting extraction type
+ */
+typedef enum ioc_fm_pcd_extract_type {
+	e_IOC_FM_PCD_EXTRACT_BY_HDR,	/**< Extract according to header */
+	e_IOC_FM_PCD_EXTRACT_NON_HDR,
+		/**< Extract from data that is not the header */
+	e_IOC_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO
+			/**< Extract private info as specified by user */
+} ioc_fm_pcd_extract_type;
+
+/*
+ * @Description   An enum for selecting a default
+ */
+typedef enum ioc_fm_pcd_kg_extract_dflt_select {
+	e_IOC_FM_PCD_KG_DFLT_GBL_0,
+		/**< Default selection is KG register 0 */
+	e_IOC_FM_PCD_KG_DFLT_GBL_1,
+		/**< Default selection is KG register 1 */
+	e_IOC_FM_PCD_KG_DFLT_PRIVATE_0,
+		/**< Default selection is a per scheme register 0 */
+	e_IOC_FM_PCD_KG_DFLT_PRIVATE_1,
+		/**< Default selection is a per scheme register 1 */
+	e_IOC_FM_PCD_KG_DFLT_ILLEGAL	/**< Illegal selection */
+} ioc_fm_pcd_kg_extract_dflt_select;
+
+/*
+ * @Description   Enumeration type defining all default groups - each group
+ *		  shares a default value, one of four user-initialized values.
+ */
+typedef enum ioc_fm_pcd_kg_known_fields_dflt_types {
+	e_IOC_FM_PCD_KG_MAC_ADDR,		/**< MAC Address */
+	e_IOC_FM_PCD_KG_TCI,			/**< TCI field */
+	e_IOC_FM_PCD_KG_ENET_TYPE,		/**< ENET Type */
+	e_IOC_FM_PCD_KG_PPP_SESSION_ID,		/**< PPP Session id */
+	e_IOC_FM_PCD_KG_PPP_PROTOCOL_ID,	/**< PPP Protocol id */
+	e_IOC_FM_PCD_KG_MPLS_LABEL,		/**< MPLS label */
+	e_IOC_FM_PCD_KG_IP_ADDR,		/**< IP addr */
+	e_IOC_FM_PCD_KG_PROTOCOL_TYPE,		/**< Protocol type */
+	e_IOC_FM_PCD_KG_IP_TOS_TC,		/**< TOS or TC */
+	e_IOC_FM_PCD_KG_IPV6_FLOW_LABEL,	/**< IPV6 flow label */
+	e_IOC_FM_PCD_KG_IPSEC_SPI,		/**< IPSEC SPI */
+	e_IOC_FM_PCD_KG_L4_PORT,		/**< L4 Port */
+	e_IOC_FM_PCD_KG_TCP_FLAG,		/**< TCP Flag */
+	e_IOC_FM_PCD_KG_GENERIC_FROM_DATA,
+		/**< grouping implemented by SW, any data extraction that is not
+		 * the full field described above
+		 */
+	e_IOC_FM_PCD_KG_GENERIC_FROM_DATA_NO_V,
+		/**< grouping implemented by SW, any data extraction without
+		 * validation
+		 */
+	e_IOC_FM_PCD_KG_GENERIC_NOT_FROM_DATA
+		/**< grouping implemented by SW, extraction from parser result
+		 * or direct use of default value
+		 */
+} ioc_fm_pcd_kg_known_fields_dflt_types;
+
+/*
+ * @Description   Enumeration type for defining header index for scenarios with
+ *		  multiple (tunneled) headers
+ */
+typedef enum ioc_fm_pcd_hdr_index {
+	e_IOC_FM_PCD_HDR_INDEX_NONE	=   0,
+				/**< used when multiple headers not used, also
+				 * to specify regular IP (not tunneled).
+				 */
+	e_IOC_FM_PCD_HDR_INDEX_1,/**< may be used for VLAN, MPLS, tunneled IP */
+	e_IOC_FM_PCD_HDR_INDEX_2,/**< may be used for MPLS, tunneled IP */
+	e_IOC_FM_PCD_HDR_INDEX_3,/**< may be used for MPLS */
+	e_IOC_FM_PCD_HDR_INDEX_LAST =   0xFF /**< may be used for VLAN, MPLS */
+} ioc_fm_pcd_hdr_index;
+
+/*
+ * @Description   Enumeration type for selecting the policer profile functional
+ *		  type
+ */
+typedef enum ioc_fm_pcd_profile_type_selection {
+	e_IOC_FM_PCD_PLCR_PORT_PRIVATE,		/**< Port dedicated profile */
+	e_IOC_FM_PCD_PLCR_SHARED
+			/**< Shared profile (shared within partition) */
+} ioc_fm_pcd_profile_type_selection;
+
+/*
+ * @Description   Enumeration type for selecting the policer profile algorithm
+ */
+typedef enum ioc_fm_pcd_plcr_algorithm_selection {
+	e_IOC_FM_PCD_PLCR_PASS_THROUGH, /**< Policer pass through */
+	e_IOC_FM_PCD_PLCR_RFC_2698,	/**< Policer algorithm RFC 2698 */
+	e_IOC_FM_PCD_PLCR_RFC_4115	/**< Policer algorithm RFC 4115 */
+} ioc_fm_pcd_plcr_algorithm_selection;
+
+/*
+ * @Description   Enumeration type for selecting a policer profile color mode
+ */
+typedef enum ioc_fm_pcd_plcr_color_mode {
+	e_IOC_FM_PCD_PLCR_COLOR_BLIND,  /**< Color blind */
+	e_IOC_FM_PCD_PLCR_COLOR_AWARE   /**< Color aware */
+} ioc_fm_pcd_plcr_color_mode;
+
+/*
+ * @Description   Enumeration type for selecting a policer profile color
+ */
+typedef enum ioc_fm_pcd_plcr_color {
+	e_IOC_FM_PCD_PLCR_GREEN,	/**< Green */
+	e_IOC_FM_PCD_PLCR_YELLOW,	/**< Yellow */
+	e_IOC_FM_PCD_PLCR_RED,		/**< Red */
+	e_IOC_FM_PCD_PLCR_OVERRIDE	/**< Color override */
+} ioc_fm_pcd_plcr_color;
+
+/*
+ * @Description   Enumeration type for selecting the policer profile packet
+ *		  frame length selector
+ */
+typedef enum ioc_fm_pcd_plcr_frame_length_select {
+	e_IOC_FM_PCD_PLCR_L2_FRM_LEN,	/**< L2 frame length */
+	e_IOC_FM_PCD_PLCR_L3_FRM_LEN,	/**< L3 frame length */
+	e_IOC_FM_PCD_PLCR_L4_FRM_LEN,	/**< L4 frame length */
+	e_IOC_FM_PCD_PLCR_FULL_FRM_LEN	/**< Full frame length */
+} ioc_fm_pcd_plcr_frame_length_select;
+
+/*
+ * @Description   Enumeration type for selecting roll-back frame
+ */
+typedef enum ioc_fm_pcd_plcr_roll_back_frame_select {
+	e_IOC_FM_PCD_PLCR_ROLLBACK_L2_FRM_LEN,	/**< Rollback L2 frame length */
+	e_IOC_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN
+				/**< Rollback Full frame length */
+} ioc_fm_pcd_plcr_roll_back_frame_select;
+
+/*
+ * @Description   Enumeration type for selecting the policer profile packet or
+ *		  byte mode
+ */
+typedef enum ioc_fm_pcd_plcr_rate_mode {
+	e_IOC_FM_PCD_PLCR_BYTE_MODE,	/**< Byte mode */
+	e_IOC_FM_PCD_PLCR_PACKET_MODE   /**< Packet mode */
+} ioc_fm_pcd_plcr_rate_mode;
+
+/*
+ * @Description   Enumeration type for defining action of frame
+ */
+typedef enum ioc_fm_pcd_done_action {
+	e_IOC_FM_PCD_ENQ_FRAME = 0,	/**< Enqueue frame */
+	e_IOC_FM_PCD_DROP_FRAME	/**< Drop frame */
+} ioc_fm_pcd_done_action;
+
+/*
+ * @Description   Enumeration type for selecting the policer counter
+ */
+typedef enum ioc_fm_pcd_plcr_profile_counters {
+	e_IOC_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER,
+					/**< Green packets counter */
+	e_IOC_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER,
+					/**< Yellow packets counter */
+	e_IOC_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER,
+					/**< Red packets counter */
+	e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER,
+					/**< Recolored yellow packets counter */
+	e_IOC_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER
+					/**< Recolored red packets counter */
+} ioc_fm_pcd_plcr_profile_counters;
+
+/*
+ * @Description   Enumeration type for selecting the PCD action after extraction
+ */
+typedef enum ioc_fm_pcd_action {
+	e_IOC_FM_PCD_ACTION_NONE,		/**< NONE  */
+	e_IOC_FM_PCD_ACTION_EXACT_MATCH,
+		/**< Exact match on the selected extraction */
+	e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP
+		/**< Indexed lookup on the selected extraction */
+} ioc_fm_pcd_action;
+
+/*
+ * @Description   Enumeration type for selecting type of insert manipulation
+ */
+typedef enum ioc_fm_pcd_manip_hdr_insrt_type {
+	e_IOC_FM_PCD_MANIP_INSRT_GENERIC,
+		/**< Insert according to offset & size */
+	e_IOC_FM_PCD_MANIP_INSRT_BY_HDR,
+		/**< Insert according to protocol */
+} ioc_fm_pcd_manip_hdr_insrt_type;
+
+/*
+ * @Description   Enumeration type for selecting type of remove manipulation
+ */
+typedef enum ioc_fm_pcd_manip_hdr_rmv_type {
+	e_IOC_FM_PCD_MANIP_RMV_GENERIC,
+		/**< Remove according to offset & size */
+	e_IOC_FM_PCD_MANIP_RMV_BY_HDR
+		/**< Remove according to offset & size */
+} ioc_fm_pcd_manip_hdr_rmv_type;
+
+/*
+ * @Description   An enum for selecting specific L2 fields removal
+ */
+typedef enum ioc_fm_pcd_manip_hdr_rmv_specific_l2 {
+	e_IOC_FM_PCD_MANIP_HDR_RMV_ETHERNET,	/**< Ethernet/802.3 MAC */
+	e_IOC_FM_PCD_MANIP_HDR_RMV_STACKED_QTAGS,	/**< stacked QTags */
+	e_IOC_FM_PCD_MANIP_HDR_RMV_ETHERNET_AND_MPLS,
+			/**< MPLS and Ethernet/802.3 MAC header unitl the header
+			 * which follows the MPLS header
+			 */
+	e_IOC_FM_PCD_MANIP_HDR_RMV_MPLS
+			/**< Remove MPLS header (Unlimited MPLS labels) */
+} ioc_fm_pcd_manip_hdr_rmv_specific_l2;
+
+/*
+ * @Description   Enumeration type for selecting specific fields updates
+ */
+typedef enum ioc_fm_pcd_manip_hdr_field_update_type {
+	e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN,	/**< VLAN updates */
+	e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4,	/**< IPV4 updates */
+	e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6,	/**< IPV6 updates */
+	e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP,	/**< TCP_UDP updates */
+} ioc_fm_pcd_manip_hdr_field_update_type;
+
+/*
+ * @Description   Enumeration type for selecting VLAN updates
+ */
+typedef enum ioc_fm_pcd_manip_hdr_field_update_vlan {
+	e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_VPRI,
+				/**< Replace VPri of outer most VLAN tag. */
+	e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN
+				/**< DSCP to VLAN priority bits translation */
+} ioc_fm_pcd_manip_hdr_field_update_vlan;
+
+/*
+ * @Description   Enumeration type for selecting specific L2 fields removal
+ */
+typedef enum ioc_fm_pcd_manip_hdr_insrt_specific_l2 {
+	e_IOC_FM_PCD_MANIP_HDR_INSRT_MPLS
+		/**< Insert MPLS header (Unlimited MPLS labels) */
+} ioc_fm_pcd_manip_hdr_insrt_specific_l2;
+
+/*
+ * @Description   Enumeration type for selecting QoS mapping mode
+ *
+ *		  Note: In all cases except
+ *		  'e_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE' User should instruct the
+ *		  port to read the parser-result
+ */
+typedef enum ioc_fm_pcd_manip_hdr_qos_mapping_mode {
+	e_IOC_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE = 0,
+			/**< No mapping, QoS field will not be changed */
+	e_IOC_FM_PCD_MANIP_HDR_QOS_MAPPING_AS_IS,
+			/**< QoS field will be overwritten by the last byte in
+			 * the parser-result.
+			 */
+} ioc_fm_pcd_manip_hdr_qos_mapping_mode;
+
+/*
+ * @Description   Enumeration type for selecting QoS source
+ *
+ *		  Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_SRC_NONE'
+ *		  User should left room for the parser-result on input/output
+ *		  buffer and instruct the port to read/write the parser-result
+ *		  to the buffer (RPD should be set)
+ */
+typedef enum ioc_fm_pcd_manip_hdr_qos_src {
+	e_IOC_FM_PCD_MANIP_HDR_QOS_SRC_NONE = 0,
+			/**< TODO */
+	e_IOC_FM_PCD_MANIP_HDR_QOS_SRC_USER_DEFINED,
+			/**< QoS will be taken from the last byte in the
+			 * parser-result.
+			 */
+} ioc_fm_pcd_manip_hdr_qos_src;
+
+/*
+ * @Description   Enumeration type for selecting type of header insertion
+ */
+typedef enum ioc_fm_pcd_manip_hdr_insrt_by_hdr_type {
+	e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2,
+			/**< Specific L2 fields insertion */
+	e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_IP,		/**< IP insertion */
+	e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_UDP,		/**< UDP insertion */
+	e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE,
+			/**< UDP lite insertion */
+	e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP		/**< CAPWAP insertion */
+} ioc_fm_pcd_manip_hdr_insrt_by_hdr_type;
+
+/*
+ * @Description   Enumeration type for selecting specific custom command
+ */
+typedef enum ioc_fm_pcd_manip_hdr_custom_type {
+	e_IOC_FM_PCD_MANIP_HDR_CUSTOM_IP_REPLACE,
+			/**< Replace IPv4/IPv6 */
+	e_IOC_FM_PCD_MANIP_HDR_CUSTOM_GEN_FIELD_REPLACE,
+} ioc_fm_pcd_manip_hdr_custom_type;
+
+/*
+ * @Description   Enumeration type for selecting specific custom command
+ */
+typedef enum ioc_fm_pcd_manip_hdr_custom_ip_replace {
+	e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV4_BY_IPV6,
+					/**< Replace IPv4 by IPv6 */
+	e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4
+					/**< Replace IPv6 by IPv4 */
+} ioc_fm_pcd_manip_hdr_custom_ip_replace;
+
+/*
+ * @Description   Enumeration type for selecting type of header removal
+ */
+typedef enum ioc_fm_pcd_manip_hdr_rmv_by_hdr_type {
+	e_IOC_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2 = 0,
+			/**< Specific L2 fields removal */
+	e_IOC_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP,	/**< CAPWAP removal */
+	e_IOC_FM_PCD_MANIP_RMV_BY_HDR_FROM_START,
+				/**< Locate from data that is not the header */
+} ioc_fm_pcd_manip_hdr_rmv_by_hdr_type;
+
+/*
+ * @Description   Enumeration type for selecting type of timeout mode
+ */
+typedef enum ioc_fm_pcd_manip_reassem_time_out_mode {
+	e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAMES,
+					/**< Limits the time of the reassembly
+					 * process from the first fragment to
+					 * the last
+					 */
+	e_IOC_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAG
+					/**< Limits the time of receiving the
+					 * fragment
+					 */
+} ioc_fm_pcd_manip_reassem_time_out_mode;
+
+/*
+ * @Description   Enumeration type for selecting type of WaysNumber mode
+ */
+typedef enum ioc_fm_pcd_manip_reassem_ways_number {
+	e_IOC_FM_PCD_MANIP_ONE_WAY_HASH = 1,	/**< One way hash    */
+	e_IOC_FM_PCD_MANIP_TWO_WAYS_HASH,	/**< Two ways hash   */
+	e_IOC_FM_PCD_MANIP_THREE_WAYS_HASH,	/**< Three ways hash */
+	e_IOC_FM_PCD_MANIP_FOUR_WAYS_HASH,	/**< Four ways hash  */
+	e_IOC_FM_PCD_MANIP_FIVE_WAYS_HASH,	/**< Five ways hash  */
+	e_IOC_FM_PCD_MANIP_SIX_WAYS_HASH,	/**< Six ways hash   */
+	e_IOC_FM_PCD_MANIP_SEVEN_WAYS_HASH,	/**< Seven ways hash */
+	e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH	/**< Eight ways hash */
+} ioc_fm_pcd_manip_reassem_ways_number;
+
+/*
+ * @Description   Enumeration type for selecting manipulation type
+ */
+typedef enum ioc_fm_pcd_manip_type {
+	e_IOC_FM_PCD_MANIP_HDR = 0,		/**< Header manipulation */
+	e_IOC_FM_PCD_MANIP_REASSEM,		/**< Reassembly */
+	e_IOC_FM_PCD_MANIP_FRAG,		/**< Fragmentation */
+	e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD	/**< Special Offloading */
+} ioc_fm_pcd_manip_type;
+
+/*
+ * @Description   Enumeration type for selecting type of statistics mode
+ */
+typedef enum ioc_fm_pcd_cc_stats_mode {
+	e_IOC_FM_PCD_CC_STATS_MODE_NONE = 0,	/**< No statistics support */
+	e_IOC_FM_PCD_CC_STATS_MODE_FRAME,	/**< Frame count statistics */
+	e_IOC_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME,
+			/**< Byte and frame count statistics */
+	e_IOC_FM_PCD_CC_STATS_MODE_RMON,
+			/**< Byte and frame length range count statistics */
+} ioc_fm_pcd_cc_stats_mode;
+
+/*
+ * @Description   Enumeration type for determining the action in case an IP
+ *		  packet is larger than MTU but its DF (Don't Fragment) bit is
+ *		  set.
+ */
+typedef enum ioc_fm_pcd_manip_donot_frag_action {
+	e_IOC_FM_PCD_MANIP_DISCARD_PACKET = 0,	/**< Discard packet */
+	e_IOC_FM_PCD_MANIP_ENQ_TO_ERR_Q_OR_DISCARD_PACKET =
+			e_IOC_FM_PCD_MANIP_DISCARD_PACKET,
+				/**< Obsolete, cannot enqueue to error queue; In
+				 * practice, selects to discard packets; Will be
+				 * removed in the future
+				 */
+	e_IOC_FM_PCD_MANIP_FRAGMENT_PACKECT,
+				/**< Fragment packet and continue normal
+				 * processing
+				 */
+	e_IOC_FM_PCD_MANIP_CONTINUE_WITHOUT_FRAG
+				/**< Continue normal processing without
+				 * fragmenting the packet
+				 */
+} ioc_fm_pcd_manip_donot_frag_action;
+
+/*
+ * @Description   Enumeration type for selecting type of special offload
+ *		  manipulation
+ */
+typedef enum ioc_fm_pcd_manip_special_offload_type {
+	e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC,
+					/**< IPSec offload manipulation */
+	e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP
+					/**< CAPWAP offload manipulation */
+} ioc_fm_pcd_manip_special_offload_type;
+
+/*
+ * @Description   A union of protocol dependent special options
+ *		  (Must match union u_FmPcdHdrProtocolOpt defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef union ioc_fm_pcd_hdr_protocol_opt_u {
+	ioc_eth_protocol_opt_t	eth_opt;	/**< Ethernet options */
+	ioc_vlan_protocol_opt_t   vlan_opt;	/**< Vlan options */
+	ioc_mpls_protocol_opt_t   mpls_opt;	/**< MPLS options */
+	ioc_ipv4_protocol_opt_t   ipv4_opt;	/**< IPv4 options */
+	ioc_ipv6_protocol_opt_t   ipv6_opt;	/**< IPv6 options */
+	ioc_capwap_protocol_opt_t capwap_opt;  /**< CAPWAP options */
+} ioc_fm_pcd_hdr_protocol_opt_u;
+
+/*
+ * @Description   A union holding all known protocol fields
+ */
+typedef union ioc_fm_pcd_fields_u {
+	ioc_header_field_eth_t		eth;		/**< Ethernet*/
+	ioc_header_field_vlan_t		vlan;		/**< VLAN*/
+	ioc_header_field_llc_snap_t	llc_snap;	/**< LLC SNAP*/
+	ioc_header_field_pppoe_t		pppoe;	/**< PPPoE*/
+	ioc_header_field_mpls_t		mpls;		/**< MPLS*/
+	ioc_header_field_ip_t		ip;		/**< IP	*/
+	ioc_header_field_ipv4_t		ipv4;		/**< IPv4*/
+	ioc_header_field_ipv6_t		ipv6;		/**< IPv6*/
+	ioc_header_field_udp_t		udp;		/**< UDP	*/
+	ioc_header_field_udp_lite_t	udp_lite;	/**< UDP_Lite*/
+	ioc_header_field_tcp_t		tcp;		/**< TCP	*/
+	ioc_header_field_sctp_t		sctp;		/**< SCTP*/
+	ioc_header_field_dccp_t		dccp;		/**< DCCP*/
+	ioc_header_field_gre_t		gre;		/**< GRE	*/
+	ioc_header_field_minencap_t	minencap;/**< Minimal Encapsulation  */
+	ioc_header_field_ipsec_ah_t	ipsec_ah;	/**< IPSec AH*/
+	ioc_header_field_ipsec_esp_t	ipsec_esp;	/**< IPSec ESP*/
+	ioc_header_field_udp_encap_esp_t	udp_encap_esp;
+						/**< UDP Encapsulation ESP  */
+} ioc_fm_pcd_fields_u;
+
+/*
+ * @Description   Parameters for defining header extraction for key generation
+ */
+typedef struct ioc_fm_pcd_from_hdr_t {
+	uint8_t		size;	/**< Size in byte */
+	uint8_t		offset;	/**< Byte offset */
+} ioc_fm_pcd_from_hdr_t;
+
+/*
+ * @Description   Parameters for defining field extraction for key generation
+ */
+typedef struct ioc_fm_pcd_from_field_t {
+	ioc_fm_pcd_fields_u field;	/**< Field selection */
+	uint8_t		size;	/**< Size in byte */
+	uint8_t		offset;	/**< Byte offset */
+} ioc_fm_pcd_from_field_t;
+
+/*
+ * @Description   Parameters for defining a single network environment unit
+ *		  A distinction unit should be defined if it will later be used
+ *		  by one or more PCD engines to distinguish between flows.
+ *		  (Must match struct t_FmPcdDistinctionUnit defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_distinction_unit_t {
+	struct {
+	ioc_net_header_type	hdr;
+				/**< One of the headers supported by the FM */
+	ioc_fm_pcd_hdr_protocol_opt_u  opt;	/**< Select only one option! */
+	} hdrs[IOC_FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS];
+} ioc_fm_pcd_distinction_unit_t;
+
+/*
+ * @Description   Parameters for defining all different distinction units
+ *		  supported by a specific PCD Network Environment
+ *		  Characteristics module.
+ *
+ *		  Each unit represent a protocol or a group of protocols that
+ *		  may be used later by the different PCD engines to distinguish
+ *		  between flows.
+ *		  (Must match struct t_FmPcdNetEnvParams defined in
+ *		  fm_pcd_ext.h)
+ */
+struct fm_pcd_net_env_params_t {
+	uint8_t num_of_distinction_units;
+	/**< Number of different units to be identified */
+	ioc_fm_pcd_distinction_unit_t
+		units[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
+	/**< An array of num_of_distinction_units of the different units to be
+	 * identified
+	 */
+};
+
+typedef struct ioc_fm_pcd_net_env_params_t {
+	struct fm_pcd_net_env_params_t param;
+	void				*id;
+		/**< Output parameter; Returns the net-env Id to be used */
+} ioc_fm_pcd_net_env_params_t;
+
+/*
+ * @Description   Parameters for defining a single extraction action when
+ *		  creating a key
+ */
+typedef struct ioc_fm_pcd_extract_entry_t {
+	ioc_fm_pcd_extract_type		type;	/**< Extraction type select */
+	union {
+	struct {
+		ioc_net_header_type	hdr;		/**< Header selection */
+		bool			ignore_protocol_validation;
+					/**< Ignore protocol validation */
+		ioc_fm_pcd_hdr_index	hdr_index;
+					/**< Relevant only for MPLS, VLAN and
+					 * tunneled IP. Otherwise should be
+					 * cleared.
+					 */
+		ioc_fm_pcd_extract_by_hdr_type  type;
+					/**< Header extraction type select */
+		union {
+		ioc_fm_pcd_from_hdr_t	from_hdr;
+					/**< Extract bytes from header
+					 * parameters
+					 */
+		ioc_fm_pcd_from_field_t	from_field;
+					/**< Extract bytes from field parameters
+					 */
+		ioc_fm_pcd_fields_u	full_field;
+					/**< Extract full field parameters */
+		} extract_by_hdr_type;
+	} extract_by_hdr;/**< Used when type = e_IOC_FM_PCD_KG_EXTRACT_BY_HDR */
+	struct {
+		ioc_fm_pcd_extract_from	src;
+					/**< Non-header extraction source */
+		ioc_fm_pcd_action	action;	/**< Relevant for CC Only */
+		uint16_t	ic_indx_mask;
+				/**< Relevant only for CC whenaction =
+				 * e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP; Note that
+				 * the number of bits that are set within this
+				 * mask must be log2 of the CC-node
+				 * 'num_of_keys'. Note that the mask cannot be
+				 * set on the lower bits.
+				 */
+		uint8_t			offset;	/**< Byte offset */
+		uint8_t			size;	/**< Size in bytes */
+	} extract_non_hdr;
+		/**< Used when type = e_IOC_FM_PCD_KG_EXTRACT_NON_HDR */
+	} extract_params;
+} ioc_fm_pcd_extract_entry_t;
+
+/*
+ * @Description   A structure for defining masks for each extracted
+ *		  field in the key.
+ */
+typedef struct ioc_fm_pcd_kg_extract_mask_t {
+	uint8_t		extract_array_index;
+				/**< Index in the extraction array, as
+				 * initialized by user
+				 */
+	uint8_t		offset;	/**< Byte offset */
+	uint8_t		mask;
+			/**< A byte mask (selected bits will be ignored) */
+} ioc_fm_pcd_kg_extract_mask_t;
+
+/*
+ * @Description   A structure for defining default selection per groups of
+ *		  fields
+ */
+typedef struct ioc_fm_pcd_kg_extract_dflt_t {
+	ioc_fm_pcd_kg_known_fields_dflt_types	type;
+						/**< Default type select */
+	ioc_fm_pcd_kg_extract_dflt_select	dflt_select;
+						/**< Default register select */
+} ioc_fm_pcd_kg_extract_dflt_t;
+
+
+/*
+ * @Description   A structure for defining all parameters needed for
+ *		  generation a key and using a hash function
+ */
+typedef struct ioc_fm_pcd_kg_key_extract_and_hash_params_t {
+	uint32_t			private_dflt0;
+					/**< Scheme default register 0 */
+	uint32_t			private_dflt1;
+					/**< Scheme default register 1 */
+	uint8_t				num_of_used_extracts;
+					/**< defines the valid size of the
+					 * following array
+					 */
+	ioc_fm_pcd_extract_entry_t
+			extract_array[IOC_FM_PCD_KG_MAX_EXTRACTS_PER_KEY];
+					/**< An array of extraction definitions.
+					 */
+	uint8_t				num_of_used_dflts;
+					/**< defines the valid size of the
+					 * following array
+					 */
+	ioc_fm_pcd_kg_extract_dflt_t
+				dflts[IOC_FM_PCD_KG_NUM_OF_DEFAULT_GROUPS];
+					/**< For each extraction used in this
+					 * scheme, specify the required default
+					 * register to be used when header is
+					 * not found. types not specified in
+					 * this array will get undefined value.
+					 */
+	uint8_t				num_of_used_masks;
+					/**< Defines the valid size of the
+					 * following array
+					 */
+	ioc_fm_pcd_kg_extract_mask_t
+				masks[IOC_FM_PCD_KG_NUM_OF_EXTRACT_MASKS];
+	uint8_t				hash_shift;
+					/**< Hash result right shift. Selects
+					 * the 24 bits out of the 64 hash
+					 * result. 0 means using the 24 LSB's,
+					 * otherwise use the 24 LSB's after
+					 * shifting right.
+					 */
+	uint32_t			hash_dist_num_of_fqids;
+					/**< must be > 1 and a power of 2.
+					 * Represents the range of queues for
+					 * the key and hash functionality
+					 */
+	uint8_t				hash_distribution_fqids_shift;
+					/**< selects the FQID bits that will be
+					 * effected by the hash
+					 */
+	bool				symmetric_hash;
+					/**< TRUE to generate the same hash for
+					 * frames with swapped source and
+					 * destination fields on all layers; If
+					 * TRUE, driver will check that for all
+					 * layers, if SRC extraction is
+					 * selected, DST extraction must also be
+					 * selected, and vice versa.
+					 */
+} ioc_fm_pcd_kg_key_extract_and_hash_params_t;
+
+/*
+ * @Description   A structure of parameters for defining a single Qid mask
+ *		  (extracted OR).
+ */
+typedef struct ioc_fm_pcd_kg_extracted_or_params_t {
+	ioc_fm_pcd_extract_type		type;
+					/**< Extraction type select */
+	union {
+	struct {
+			/**< used when type = e_IOC_FM_PCD_KG_EXTRACT_BY_HDR */
+		ioc_net_header_type		hdr;
+		ioc_fm_pcd_hdr_index		hdr_index;
+						/**< Relevant only for MPLS,
+						 * VLAN and tunneled IP.
+						 * Otherwise should be cleared.
+						 */
+		bool				ignore_protocol_validation;
+
+	} extract_by_hdr;
+	ioc_fm_pcd_extract_from		src;
+					/**< used when type =
+					 * e_IOC_FM_PCD_KG_EXTRACT_NON_HDR
+					 */
+	} extract_params;
+	uint8_t				extraction_offset;
+					/**< Offset for extraction */
+	ioc_fm_pcd_kg_extract_dflt_select	dflt_value;
+					/**< Select register from which
+					 * extraction is taken if field not
+					 * found
+					 */
+	uint8_t				mask;
+					/**< Mask LSB byte of extraction
+					 * (specified bits are ignored)
+					 */
+
+	uint8_t			bit_offset_in_fqid;
+		/**< 0-31, Selects which bits of the 24 FQID bits to effect
+		 * using the extracted byte; Assume byte is placed as the 8
+		 * MSB's in a 32 bit word where the lower bits are the FQID; i.e
+		 * if bitOffsetInFqid=1 than its LSB will effect the FQID MSB,
+		 * if bitOffsetInFqid=24 than the extracted byte will effect the
+		 * 8 LSB's of the FQID, if bitOffsetInFqid=31 than the byte's
+		 * MSB will effect the FQID's LSB; 0 means - no effect on FQID;
+		 * Note that one, and only one of bitOffsetInFqid or
+		 * bitOffsetInPlcrProfile must be set (i.e, extracted byte must
+		 * effect either FQID or Policer profile).
+		 */
+	uint8_t			bit_offset_in_plcr_profile;
+		/**< 0-15, Selects which bits of the 8 policer profile id bits
+		 * to effect using the extracted byte; Assume byte is placed as
+		 * the 8 MSB's in a 16 bit word where the lower bits are the
+		 * policer profile id; i.e if bitOffsetInPlcrProfile=1 than its
+		 * LSB will effect the profile MSB, if bitOffsetInFqid=8 than
+		 * the extracted byte will effect the whole policer profile id,
+		 * if bitOffsetInFqid=15 than the byte's MSB will effect the
+		 * Policer Profile id's LSB; 0 means - no effect on policer
+		 * profile; Note that one, and only one of bitOffsetInFqid or
+		 * bitOffsetInPlcrProfile must be set (i.e, extracted byte must
+		 * effect either FQID or Policer profile).
+		 */
+} ioc_fm_pcd_kg_extracted_or_params_t;
+
+/*
+ * @Description   A structure for configuring scheme counter
+ */
+typedef struct ioc_fm_pcd_kg_scheme_counter_t {
+	bool		update;
+			/**< FALSE to keep the current counter state and
+			 * continue from that point, TRUE to update/reset the
+			 * counter when the scheme is written.
+			 */
+	uint32_t	value;
+			/**< If update=TRUE, this value will be written into the
+			 * counter; clear this field to reset the counter.
+			 */
+} ioc_fm_pcd_kg_scheme_counter_t;
+
+
+/*
+ * @Description   A structure for retrieving FMKG_SE_SPC
+ */
+typedef struct ioc_fm_pcd_kg_scheme_spc_t {
+	uint32_t	val;	/**< return value */
+	void	*id;		/**< scheme handle */
+} ioc_fm_pcd_kg_scheme_spc_t;
+
+/*
+ * @Description   A structure for defining policer profile parameters as
+ *		  required by keygen (when policer is the next engine after this
+ *		  scheme).
+ *		  (Must match struct t_FmPcdKgPlcrProfile defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_kg_plcr_profile_t {
+	bool		shared_profile;
+			/**< TRUE if this profile is shared between ports (i.e.
+			 * managed by primary partition) May not be TRUE if
+			 * profile is after Coarse Classification
+			 */
+	bool		direct;
+			/**< If TRUE, direct_relative_profile_id only selects
+			 * the profile id, if FALSE
+			 * fqid_offset_relative_profile_id_base is used together
+			 * with fqid_offset_shift and num_of_profiles
+			 * parameters, to define a range of profiles from which
+			 * the KeyGen result will determine the destination
+			 * policer profile.
+			 */
+	union {
+	uint16_t	direct_relative_profile_id;
+			/**< Used if 'direct' is TRUE, to select policer
+			 * profile. This parameter should indicate the policer
+			 * profile offset within the port's policer profiles or
+			 * SHARED window.
+			 */
+	struct {
+		uint8_t	fqid_offset_shift;
+			/**< Shift of KG results without the qid base */
+		uint8_t	fqid_offset_relative_profile_id_base;
+			/**< OR of KG results without the qid base This
+			 * parameter should indicate the policer profile offset
+			 * within the port's policer profiles window or SHARED
+			 * window depends on shared_profile
+			 */
+		uint8_t	num_of_profiles;
+			/**< Range of profiles starting at base */
+	} indirect_profile;		/**< Indirect profile parameters */
+	} profile_select;
+			/**< Direct/indirect profile selection and parameters */
+} ioc_fm_pcd_kg_plcr_profile_t;
+
+/*
+ * @Description   Parameters for configuring a storage profile for a KeyGen
+ *		  scheme.
+ */
+typedef struct ioc_fm_pcd_kg_storage_profile_t {
+	bool	direct;
+		/**< If TRUE, directRelativeProfileId only selects the profile
+		 * id; If FALSE, fqidOffsetRelativeProfileIdBase is used
+		 * together with fqidOffsetShift and num_of_profiles parameters
+		 * to define a range of profiles from which the KeyGen result
+		 * will determine the destination storage profile.
+		 */
+	union {
+		uint16_t	direct_relative_profile_id;
+		/**< Used when 'direct' is TRUE, to select a storage profile;
+		 * should indicate the storage profile offset within the port's
+		 * storage profiles window.
+		 */
+		struct {
+			uint8_t	fqid_offset_shift;
+			/**< Shift of KeyGen results without the FQID base */
+			uint8_t	fqid_offset_relative_profile_id_base;
+			/**< OR of KeyGen results without the FQID base; should
+			 * indicate the policer profile offset within the port's
+			 * storage profiles window.
+			 */
+			uint8_t	num_of_profiles;
+			/**< Range of profiles starting at base. */
+		} indirect_profile;
+		/**< Indirect profile parameters. */
+	} profile_select;
+	/**< Direct/indirect profile selection and parameters. */
+} ioc_fm_pcd_kg_storage_profile_t;
+
+/*
+ * @Description   Parameters for defining CC as the next engine after KeyGen
+ *		  (Must match struct t_FmPcdKgCc defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_kg_cc_t {
+	void				*tree_id;
+					/**< CC Tree id */
+	uint8_t				grp_id;
+					/**< CC group id within the CC tree */
+	bool				plcr_next;
+					/**< TRUE if after CC, in case of data
+					 * frame, policing is required.
+					 */
+	bool				bypass_plcr_profile_generation;
+					/**< TRUE to bypass KeyGen policer
+					 * profile generation; selected profile
+					 * is the one set at port initialization
+					 */
+	ioc_fm_pcd_kg_plcr_profile_t	plcr_profile;
+					/**< Valid only if plcr_next = TRUE and
+					 * bypass_plcr_profile_generation =
+					 * FALSE
+					 */
+} ioc_fm_pcd_kg_cc_t;
+
+/*
+ * @Description   Parameters for defining initializing a KeyGen scheme (Must
+ *		  match struct t_FmPcdKgSchemeParams defined in fm_pcd_ext.h)
+ */
+struct fm_pcd_kg_scheme_params_t {
+	bool modify;	/**< TRUE to change an existing scheme */
+	union {
+		uint8_t relative_scheme_id;
+		/**< if modify=FALSE: partition-relative scheme id */
+		void *scheme_id;
+		/**< if modify=TRUE: the id of an existing scheme */
+	} scm_id;
+	bool always_direct;
+		/**< This scheme is reached only directly, i.e. no need for
+		 * match vector; KeyGen will ignore it when matching
+		 */
+	struct {
+		/**< HL relevant only if always_direct=FALSE */
+		void *net_env_id;
+		/**< The id of the Network Environment as returned
+		 * by fm_pcd_net_env_characteristics_set()
+		 */
+		uint8_t num_of_distinction_units;
+		/**< Number of NetEnv units listed in unit_ids array */
+		uint8_t unit_ids[IOC_FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS];
+		/**< Indexes as passed to SetNetEnvCharacteristics (?) array */
+	} net_env_params;
+	bool use_hash;
+		/**< use the KG Hash functionality */
+	ioc_fm_pcd_kg_key_extract_and_hash_params_t key_ext_and_hash;
+		/**< used only if useHash = TRUE */
+	bool bypass_fqid_generation;
+		/**< Normally - FALSE, TRUE to avoid FQID update in the IC; In
+		 * such a case FQID after KG will be the default FQID defined
+		 * for the relevant port, or the FQID defined by CC in cases
+		 * where CC was the previous engine.
+		 */
+	uint32_t base_fqid;
+		/**< Base FQID; Relevant only if bypass_fqid_generation = FALSE;
+		 * If hash is used and an even distribution is expected
+		 * according to hash_dist_num_of_fqids, base_fqid must
+		 * be aligned to hash_dist_num_of_fqids.
+		 */
+	uint8_t num_of_used_extracted_ors;
+		/**< Number of FQID masks listed in extracted_ors array*/
+	ioc_fm_pcd_kg_extracted_or_params_t
+		extracted_ors[IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS];
+		/**< IOC_FM_PCD_KG_NUM_OF_GENERIC_REGS registers are shared
+		 * between qid_masks functionality and some of the extraction
+		 * actions; Normally only some will be used for qid_mask. Driver
+		 * will return error if resource is full at initialization time.
+		 */
+	bool override_storage_profile;
+		/**< TRUE if KeyGen override previously decided storage profile
+		 */
+	ioc_fm_pcd_kg_storage_profile_t storage_profile;
+		/**< Used when override_storage_profile=TRUE */
+	ioc_fm_pcd_engine next_engine;
+		/**< may be BMI, PLCR or CC */
+	union {
+		/**< depends on nextEngine */
+		ioc_fm_pcd_done_action done_action;
+		/**< Used when next engine is BMI (done) */
+		ioc_fm_pcd_kg_plcr_profile_t plcr_profile;
+		/**< Used when next engine is PLCR */
+		ioc_fm_pcd_kg_cc_t cc;
+		/**< Used when next engine is CC */
+	} kg_next_engine_params;
+	ioc_fm_pcd_kg_scheme_counter_t scheme_counter;
+		/**< A structure of parameters for updating the scheme counter*/
+};
+
+typedef struct ioc_fm_pcd_kg_scheme_params_t {
+	struct fm_pcd_kg_scheme_params_t param;
+	void *id;		/**< Returns the scheme Id to be used */
+} ioc_fm_pcd_kg_scheme_params_t;
+
+/*
+ * @Collection
+ */
+#define IOC_FM_PCD_CC_STATS_MAX_FLR	10
+			/* Maximal supported number of frame length ranges */
+#define IOC_FM_PCD_CC_STATS_FLR_SIZE		2
+			/* Size in bytes of a frame length range limit */
+#define IOC_FM_PCD_CC_STATS_FLR_COUNT_SIZE	4
+			/* Size in bytes of a frame length range counter */
+/* @} */
+
+/*
+ * @Description   Parameters for defining CC as the next engine after a CC node.
+ *		  (Must match struct t_FmPcdCcNextCcParams defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_cc_params_t {
+	void	*cc_node_id;			/**< Id of the next CC node */
+} ioc_fm_pcd_cc_next_cc_params_t;
+
+/*
+ * @Description   A structure for defining Frame Replicator as the next engine
+ *		  after a CC node. (Must match struct t_FmPcdCcNextFrParams
+ *		  defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_fr_params_t {
+	void *frm_replic_id;
+			/**< The id of the next frame replicator group */
+} ioc_fm_pcd_cc_next_fr_params_t;
+
+/*
+ * @Description   A structure for defining PLCR params when PLCR is the
+ *		  next engine after a CC node
+ *		  (Must match struct t_FmPcdCcNextPlcrParams defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_plcr_params_t {
+	bool	override_params;
+		/**< TRUE if CC override previously decided parameters*/
+	bool	shared_profile;
+		/**< Relevant only if overrideParams=TRUE: TRUE if this profile
+		 * is shared between ports
+		 */
+	uint16_t	new_relative_profile_id;
+		/**< Relevant only if overrideParams=TRUE: (otherwise profile id
+		 * is taken from keygen); This parameter should indicate the
+		 * policer profile offset within the port's policer profiles or
+		 * from SHARED window.
+		 */
+	uint32_t	new_fqid;
+		/**< Relevant only if overrideParams=TRUE: FQID for enquing the
+		 * frame; In earlier chips  if policer next engine is KEYGEN,
+		 * this parameter can be 0, because the KEYGEN always decides
+		 * the enqueue FQID.
+		 */
+	uint8_t	new_relative_storage_profile_id;
+		/**< Indicates the relative storage profile offset within the
+		 * port's storage profiles window; Relevant only if the port was
+		 * configured with VSP.
+		 */
+} ioc_fm_pcd_cc_next_plcr_params_t;
+
+/*
+ * @Description   A structure for defining enqueue params when BMI is the next
+ *		  engine after a CC node (Must match struct
+ *		  t_FmPcdCcNextEnqueueParams defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_enqueue_params_t {
+	ioc_fm_pcd_done_action  action;
+				/**< Action - when next engine is BMI (done) */
+	bool			override_fqid;
+				/**< TRUE if CC override previously decided fqid
+				 * and vspid, relevant if action =
+				 * e_IOC_FM_PCD_ENQ_FRAME
+				 */
+	uint32_t		new_fqid;
+				/**< Valid if overrideFqid=TRUE, FQID for
+				 * enqueuing the frame (otherwise FQID is taken
+				 * from KeyGen), relevant if action =
+				 * e_IOC_FM_PCD_ENQ_FRAME
+				 */
+	uint8_t		new_relative_storage_profile_id;
+			/**< Valid if override_fqid=TRUE, Indicates the relative
+			 * virtual storage profile offset within the port's
+			 * storage profiles window; Relevant only if the port
+			 * was configured with VSP.
+			 */
+
+} ioc_fm_pcd_cc_next_enqueue_params_t;
+
+/*
+ * @Description   A structure for defining KG params when KG is the next engine
+ *		  after a CC node (Must match struct t_FmPcdCcNextKgParams
+ *		  defined in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_kg_params_t {
+	bool	override_fqid;
+		/**< TRUE if CC override previously decided fqid and vspid,
+		 * Note - this parameters are irrelevant for earlier chips
+		 */
+	uint32_t   new_fqid;
+		/**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame
+		 * (otherwise FQID is taken from KeyGen),
+		 * Note - this parameters are irrelevant for earlier chips
+		 */
+	uint8_t   new_relative_storage_profile_id;
+		/**< Valid if override_fqid=TRUE, Indicates the relative virtual
+		 * storage profile offset within the port's storage profiles
+		 * window; Relevant only if the port was configured with VSP.
+		 */
+	void	*p_direct_scheme;	/**< Direct scheme id to go to. */
+} ioc_fm_pcd_cc_next_kg_params_t;
+
+/*
+ * @Description   Parameters for defining the next engine after a CC node.
+ *		  (Must match struct ioc_fm_pcd_cc_next_engine_params_t defined
+ *		  in fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_next_engine_params_t {
+	ioc_fm_pcd_engine			next_engine;
+				/**< User has to initialize parameters according
+				 * to nextEngine definition
+				 */
+	union {
+		ioc_fm_pcd_cc_next_cc_params_t	cc_params;
+				/**< Parameters in case next engine is CC */
+		ioc_fm_pcd_cc_next_plcr_params_t	plcr_params;
+				/**< Parameters in case next engine is PLCR */
+		ioc_fm_pcd_cc_next_enqueue_params_t enqueue_params;
+				/**< Parameters in case next engine is BMI */
+		ioc_fm_pcd_cc_next_kg_params_t	kg_params;
+				/**< Parameters in case next engine is KG */
+		ioc_fm_pcd_cc_next_fr_params_t	fr_params;
+				/**< Parameters in case next engine is FR */
+	} params;
+		/**< Union used for all the next-engine parameters options */
+	void					*manip_id;
+				/**< Handle to Manipulation object. Relevant if
+				 * next engine is of type result
+				 * (e_IOC_FM_PCD_PLCR, e_IOC_FM_PCD_KG,
+				 * e_IOC_FM_PCD_DONE)
+				 */
+	bool					statistics_en;
+				/**< If TRUE, statistics counters are
+				 * incremented for each frame passing through
+				 * this Coarse Classification entry.
+				 */
+} ioc_fm_pcd_cc_next_engine_params_t;
+
+/*
+ * @Description   Parameters for defining a single CC key
+ */
+typedef struct ioc_fm_pcd_cc_key_params_t {
+	uint8_t		*p_key;
+			/**< pointer to the key of the size defined in key_size
+			 */
+	uint8_t		*p_mask;
+			/**< pointer to the Mask per key of the size defined in
+			 * key_size. p_key and p_mask (if defined) has to be of
+			 * the same size defined in the key_size
+			 */
+	ioc_fm_pcd_cc_next_engine_params_t  cc_next_engine_params;
+			/**< parameters for the next for the defined Key in
+			 * p_key
+			 */
+
+} ioc_fm_pcd_cc_key_params_t;
+
+/*
+ * @Description   Parameters for defining CC keys parameters
+ *		  The driver supports two methods for CC node allocation:
+ *		  dynamic and static. Static mode was created in order to
+ *		  prevent runtime alloc/free of FMan memory (MURAM), which may
+ *		  cause fragmentation; in this mode, the driver automatically
+ *		  allocates the memory according to 'max_num_of_keys' parameter.
+ *		  The driver calculates the maximal memory size that may be used
+ *		  for this CC-Node taking into consideration 'mask_support' and
+ *		  'statistics_mode' parameters. When 'action' =
+ *		  e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction
+ *		  parameters of this node, 'max_num_of_keys' must be equal to
+ *		  'num_of_keys'. In dynamic mode, 'max_num_of_keys' must be
+ *		  zero. At initialization, all required structures are allocated
+ *		  according to 'num_of_keys' parameter. During runtime
+ *		  modification, these structures are re-allocated according to
+ *		  the updated number of keys.
+ *		  Please note that 'action' and 'ic_indx_mask' mentioned in the
+ *		  specific parameter explanations are passed in the extraction
+ *		  parameters of the node (fields of
+ *		  extractccparams.extractnonhdr).
+ */
+typedef struct ioc_keys_params_t {
+	uint16_t		max_num_of_keys;
+			/**< Maximum number of keys that will (ever) be used in
+			 * this CC-Node; A value of zero may be used for dynamic
+			 * memory allocation.
+			 */
+	bool			mask_support;
+			/**< This parameter is relevant only if a node is
+			 * initialized with action =
+			 * e_IOC_FM_PCD_ACTION_EXACT_MATCH and max_num_of_keys >
+			 * 0; Should be TRUE to reserve table memory for key
+			 * masks, even if initial keys do not contain masks, or
+			 * if the node was initialized as 'empty' (without
+			 * keys); this will allow user to add keys with masks at
+			 * runtime.
+			 */
+	ioc_fm_pcd_cc_stats_mode	statistics_mode;
+			/**< Determines the supported statistics mode for all
+			 * node's keys. To enable statistics gathering,
+			 * statistics should be enabled per every key, using
+			 * 'statistics_en' in next engine parameters structure
+			 * of that key; If 'max_num_of_keys' is set, all
+			 * required structures will be preallocated for all keys
+			 */
+	uint16_t	frame_length_ranges[IOC_FM_PCD_CC_STATS_MAX_FLR];
+		/**< Relevant only for 'RMON' statistics mode (this feature is
+		 * supported only on B4860 device); Holds a list of programmable
+		 * thresholds. For each received frame, its length in bytes is
+		 * examined against these range thresholds and the appropriate
+		 * counter is incremented by 1. For example, to belong to range
+		 * i, the following should hold: range i-1 threshold < frame
+		 * length <= range i threshold Each range threshold must be
+		 * larger then its preceding range threshold. Last range
+		 * threshold must be 0xFFFF.
+		 */
+	uint16_t			num_of_keys;
+		/**< Number of initial keys; Note that in case of 'action' =
+		 * e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP, this field should be
+		 * power-of-2 of the number of bits that are set in
+		 * 'ic_indx_mask'.
+		 */
+	uint8_t			key_size;
+		/**< Size of key - for extraction of type FULL_FIELD, 'key_size'
+		 * has to be the standard size of the selected key; For other
+		 * extraction types, 'key_size' has to be as size of extraction;
+		 * When 'action' = e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP,
+		 * 'key_size' must be 2.
+		 */
+	ioc_fm_pcd_cc_key_params_t  key_params[IOC_FM_PCD_MAX_NUM_OF_KEYS];
+		/**< An array with 'num_of_keys' entries, each entry specifies
+		 * the corresponding key parameters; When 'action' =
+		 * e_IOC_FM_PCD_ACTION_EXACT_MATCH, this value must not exceed
+		 * 255 (IOC_FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved
+		 * for the 'miss' entry.
+		 */
+	ioc_fm_pcd_cc_next_engine_params_t  cc_next_engine_params_for_miss;
+		/**< Parameters for defining the next engine when a key is not
+		 * matched; Not relevant if action =
+		 * e_IOC_FM_PCD_ACTION_INDEXED_LOOKUP.
+		 */
+} ioc_keys_params_t;
+
+/*
+ * @Description   Parameters for defining a CC node
+ */
+struct fm_pcd_cc_node_params_t {
+	ioc_fm_pcd_extract_entry_t extract_cc_params;
+	/**< Extraction parameters */
+	ioc_keys_params_t keys_params;
+	/**< Keys definition matching the selected extraction */
+};
+
+typedef struct ioc_fm_pcd_cc_node_params_t {
+	struct fm_pcd_cc_node_params_t param;
+	void *id;
+	/**< Output parameter; returns the CC node Id to be used */
+} ioc_fm_pcd_cc_node_params_t;
+
+/*
+ * @Description   Parameters for defining a hash table
+ *		  (Must match struct ioc_fm_pcd_hash_table_params_t defined in
+ *		  fm_pcd_ext.h)
+ */
+struct fm_pcd_hash_table_params_t {
+	uint16_t max_num_of_keys;
+		/**< Maximum Number Of Keys that will (ever) be used in this
+		 * Hash-table
+		 */
+	ioc_fm_pcd_cc_stats_mode statistics_mode;
+		/**< If not e_IOC_FM_PCD_CC_STATS_MODE_NONE, the required
+		 * structures for the requested statistics mode will be
+		 * allocated according to max_num_of_keys.
+		 */
+	uint8_t kg_hash_shift;
+		/**< KG-Hash-shift as it was configured in the KG-scheme that
+		 * leads to this hash-table.
+		 */
+	uint16_t hash_res_mask;
+		/**< Mask that will be used on the hash-result; The
+		 * number-of-sets for this hash will be calculated as (2^(number
+		 * of bits set in 'hash_res_mask')); The 4 lower bits must be
+		 * cleared.
+		 */
+	uint8_t hash_shift;
+		/**< Byte offset from the beginning of the KeyGen hash result to
+		 * the 2-bytes to be used as hash index.
+		 */
+	uint8_t match_key_size;
+		/**< Size of the exact match keys held by the hash buckets */
+
+	ioc_fm_pcd_cc_next_engine_params_t cc_next_engine_params_for_miss;
+		/**< Parameters for defining the next engine when a key is not
+		 * matched
+		 */
+};
+
+typedef struct ioc_fm_pcd_hash_table_params_t {
+	struct fm_pcd_hash_table_params_t param;
+	void *id;
+} ioc_fm_pcd_hash_table_params_t;
+
+/*
+ * @Description   A structure with the arguments for the
+ *		  fm_pcd_hash_table_add_key ioctl() call
+ */
+typedef struct ioc_fm_pcd_hash_table_add_key_params_t {
+	void			*p_hash_tbl;
+	uint8_t			key_size;
+	ioc_fm_pcd_cc_key_params_t  key_params;
+} ioc_fm_pcd_hash_table_add_key_params_t;
+
+/*
+ * @Description   Parameters for defining a CC tree group.
+ *
+ *		  This structure defines a CC group in terms of NetEnv units and
+ *		  the action to be taken in each case. The unit_ids list must be
+ *		  given in order from low to high indices.
+ *		  ioc_fm_pcd_cc_next_engine_params_t is a list of
+ *		  2^num_of_distinction_units structures where each defines the
+ *		  next action to be taken for each units combination. for
+ *		  example: num_of_distinction_units = 2 unit_ids = {1,3}
+ *		  next_engine_per_entries_in_grp[0] =
+ *		  ioc_fm_pcd_cc_next_engine_params_t for the case that unit 1 -
+ *		  not found; unit 3 - not found;
+ *		  next_engine_per_entries_in_grp[1] =
+ *		  ioc_fm_pcd_cc_next_engine_params_t for the case that unit 1 -
+ *		  not found; unit 3 - found;
+ *		  next_engine_per_entries_in_grp[2] =
+ *		  ioc_fm_pcd_cc_next_engine_params_t for the case that unit 1 -
+ *		  found; unit 3 - not found;
+ *		  next_engine_per_entries_in_grp[3] =
+ *		  ioc_fm_pcd_cc_next_engine_params_t for the case that unit 1 -
+ *		  found; unit 3 - found;
+ */
+typedef struct ioc_fm_pcd_cc_grp_params_t {
+	uint8_t		num_of_distinction_units;   /**< Up to 4 */
+	uint8_t		unit_ids[IOC_FM_PCD_MAX_NUM_OF_CC_UNITS];
+		/**< Indexes of the units as defined in
+		 * fm_pcd_net_env_characteristics_set()
+		 */
+	ioc_fm_pcd_cc_next_engine_params_t
+		next_engine_per_entries_in_grp[IOC_FM_PCD_MAX_CC_ENTRY_IN_GRP];
+		/**< Maximum entries per group is 16 */
+} ioc_fm_pcd_cc_grp_params_t;
+
+/*
+ * @Description   Parameters for defining the CC tree groups
+ *		  (Must match struct ioc_fm_pcd_cc_tree_params_t defined in
+ *		  fm_pcd_ext.h)
+ */
+typedef struct ioc_fm_pcd_cc_tree_params_t {
+	void		*net_env_id;
+			/**< Id of the Network Environment as returned
+			 * by fm_pcd_net_env_characteristics_set()
+			 */
+	uint8_t		num_of_groups;
+			/**< Number of CC groups within the CC tree */
+	ioc_fm_pcd_cc_grp_params_t
+			fm_pcd_cc_group_params[IOC_FM_PCD_MAX_NUM_OF_CC_GROUPS];
+			/**< Parameters for each group. */
+	void		*id;
+			/**< Output parameter; Returns the tree Id to be used */
+} ioc_fm_pcd_cc_tree_params_t;
+
+/*
+ * @Description   Parameters for defining policer byte rate
+ */
+typedef struct ioc_fm_pcd_plcr_byte_rate_mode_param_t {
+	ioc_fm_pcd_plcr_frame_length_select	frame_length_selection;
+			/**< Frame length selection */
+	ioc_fm_pcd_plcr_roll_back_frame_select  roll_back_frame_selection;
+			/**< relevant option only e_IOC_FM_PCD_PLCR_L2_FRM_LEN,
+			 * e_IOC_FM_PCD_PLCR_FULL_FRM_LEN
+			 */
+} ioc_fm_pcd_plcr_byte_rate_mode_param_t;
+
+/*
+ * @Description   Parameters for defining the policer profile (based on
+ *		  RFC-2698 or RFC-4115 attributes).
+ */
+typedef struct ioc_fm_pcd_plcr_non_passthrough_alg_param_t {
+	ioc_fm_pcd_plcr_rate_mode		rate_mode;
+			/**< Byte / Packet */
+	ioc_fm_pcd_plcr_byte_rate_mode_param_t  byte_mode_param;
+			/**< Valid for Byte NULL for Packet */
+	uint32_t				committed_info_rate;
+			/**< KBits/Sec or Packets/Sec */
+	uint32_t				committed_burst_size;
+			/**< KBits or Packets */
+	uint32_t				peak_or_excess_info_rate;
+			/**< KBits/Sec or Packets/Sec */
+	uint32_t				peak_or_excess_burst_size;
+			/**< KBits or Packets */
+} ioc_fm_pcd_plcr_non_passthrough_alg_param_t;
+
+/*
+ * @Description   Parameters for defining the next engine after policer
+ */
+typedef union ioc_fm_pcd_plcr_next_engine_params_u {
+	ioc_fm_pcd_done_action	action;
+				/**< Action - when next engine is BMI (done) */
+	void			*p_profile;
+				/**< Policer profile handle -  used when next
+				 * engine is PLCR, must be a SHARED profile
+				 */
+	void			*p_direct_scheme;
+				/**< Direct scheme select - when next engine is
+				 * Keygen
+				 */
+} ioc_fm_pcd_plcr_next_engine_params_u;
+
+typedef struct ioc_fm_pcd_port_params_t {
+	ioc_fm_port_type			port_type;
+				/**< Type of port for this profile */
+	uint8_t				port_id;
+				/**< FM-Port id of port for this profile */
+} ioc_fm_pcd_port_params_t;
+
+/*
+ * @Description   Parameters for defining the policer profile entry
+ *		  (Must match struct ioc_fm_pcd_plcr_profile_params_t defined in
+ *		  fm_pcd_ext.h)
+ */
+struct fm_pcd_plcr_profile_params_t {
+	bool modify;
+		/**< TRUE to change an existing profile */
+	union {
+		struct {
+			ioc_fm_pcd_profile_type_selection profile_type;
+				/**< Type of policer profile */
+			ioc_fm_pcd_port_params_t *p_fm_port;
+				/**< Relevant for per-port profiles only */
+			uint16_t relative_profile_id;
+				/**< Profile id - relative to shared group or to
+				 * port
+				 */
+		} new_params;
+			/**< Use it when modify = FALSE */
+		void *p_profile;
+			/**< A handle to a profile - use it when modify=TRUE */
+	} profile_select;
+	ioc_fm_pcd_plcr_algorithm_selection alg_selection;
+	/**< Profile Algorithm PASS_THROUGH, RFC_2698, RFC_4115 */
+	ioc_fm_pcd_plcr_color_mode color_mode;
+	/**< COLOR_BLIND, COLOR_AWARE */
+
+	union {
+		ioc_fm_pcd_plcr_color dflt_color;
+		/**< For Color-Blind Pass-Through mode; the policer will
+		 * re-color any incoming packet with the default value.
+		 */
+		ioc_fm_pcd_plcr_color override;
+		/**< For Color-Aware modes; the profile response to a pre-color
+		 * value of 2'b11.
+		 */
+	} color;
+
+	ioc_fm_pcd_plcr_non_passthrough_alg_param_t
+		non_passthrough_alg_param;
+		/**< RFC2698 or RFC4115 parameters */
+
+	ioc_fm_pcd_engine next_engine_on_green;
+		/**< Next engine for green-colored frames */
+	ioc_fm_pcd_plcr_next_engine_params_u params_on_green;
+		/**< Next engine parameters for green-colored frames */
+
+	ioc_fm_pcd_engine next_engine_on_yellow;
+		/**< Next engine for yellow-colored frames */
+	ioc_fm_pcd_plcr_next_engine_params_u params_on_yellow;
+		/**< Next engine parameters for yellow-colored frames */
+
+	ioc_fm_pcd_engine next_engine_on_red;
+		/**< Next engine for red-colored frames */
+	ioc_fm_pcd_plcr_next_engine_params_u params_on_red;
+		/**< Next engine parameters for red-colored frames */
+
+	bool trap_profile_on_flow_A;
+		/**< Obsolete - do not use */
+	bool trap_profile_on_flow_B;
+		/**< Obsolete - do not use */
+	bool trap_profile_on_flow_C;
+		/**< Obsolete - do not use */
+};
+
+typedef struct ioc_fm_pcd_plcr_profile_params_t {
+	struct fm_pcd_plcr_profile_params_t param;
+	void	*id;
+		/**< output parameter; Returns the profile Id to be used */
+} ioc_fm_pcd_plcr_profile_params_t;
+
+/*
+ * @Description   A structure for modifying CC tree next engine
+ */
+typedef struct ioc_fm_pcd_cc_tree_modify_next_engine_params_t {
+	void				*id;
+			/**< CC tree Id to be used */
+	uint8_t				grp_indx;
+			/**< A Group index in the tree */
+	uint8_t				indx;
+			/**< Entry index in the group defined by grp_index */
+	ioc_fm_pcd_cc_next_engine_params_t  cc_next_engine_params;
+			/**< Parameters for the next for the defined Key in the
+			 * p_key
+			 */
+} ioc_fm_pcd_cc_tree_modify_next_engine_params_t;
+
+/*
+ * @Description   A structure for modifying CC node next engine
+ */
+typedef struct ioc_fm_pcd_cc_node_modify_next_engine_params_t {
+	void				*id;
+			/**< CC node Id to be used */
+	uint16_t				key_indx;
+			/**< Key index for Next Engine Params modifications;
+			 * NOTE: This parameter is IGNORED for miss-key!
+			 */
+	uint8_t				key_size;
+			/**< Key size of added key */
+	ioc_fm_pcd_cc_next_engine_params_t  cc_next_engine_params;
+			/**< parameters for the next for the defined Key in the
+			 * p_key
+			 */
+} ioc_fm_pcd_cc_node_modify_next_engine_params_t;
+
+/*
+ * @Description   A structure for remove CC node key
+ */
+typedef struct ioc_fm_pcd_cc_node_remove_key_params_t {
+	void				*id;
+			/**< CC node Id to be used */
+	uint16_t				key_indx;
+			/**< Key index for Next Engine Params modifications;
+			 * NOTE: This parameter is IGNORED for miss-key!
+			 */
+} ioc_fm_pcd_cc_node_remove_key_params_t;
+
+/*
+ * @Description   A structure for modifying CC node key and next engine
+ */
+typedef struct ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t {
+	void				*id;
+			/**< CC node Id to be used */
+	uint16_t				key_indx;
+			/**< Key index for Next Engine Params modifications;
+			 * NOTE: This parameter is IGNORED for miss-key!
+			 */
+	uint8_t				key_size;
+			/**< Key size of added key */
+	ioc_fm_pcd_cc_key_params_t	key_params;
+			/**< it's array with num_of_keys entries each entry in
+			 * the array of the type ioc_fm_pcd_cc_key_params_t
+			 */
+} ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t;
+
+/*
+ * @Description   A structure for modifying CC node key
+ */
+typedef struct ioc_fm_pcd_cc_node_modify_key_params_t {
+	void				*id;
+			/**< CC node Id to be used */
+	uint16_t				key_indx;
+			/**< Key index for Next Engine Params modifications;
+			 * NOTE: This parameter is IGNORED for miss-key!
+			 */
+	uint8_t				key_size;
+			/**< Key size of added key */
+	uint8_t				*p_key;
+			/**< Pointer to the key of the size defined in key_size
+			 */
+	uint8_t				*p_mask;
+			/**< Pointer to the Mask per key of the size defined in
+			 * key_size. p_key and p_mask (if defined) have to be of
+			 * the same size as defined in the key_size
+			 */
+} ioc_fm_pcd_cc_node_modify_key_params_t;
+
+/*
+ * @Description   A structure with the arguments for the
+ *		  fm_pcd_hash_table_remove_key ioctl() call
+ */
+typedef struct ioc_fm_pcd_hash_table_remove_key_params_t {
+	void	*p_hash_tbl;	/**< The id of the hash table */
+	uint8_t	key_size;	/**< The size of the key to remove */
+	uint8_t	*p_key;		/**< Pointer to the key to remove */
+} ioc_fm_pcd_hash_table_remove_key_params_t;
+
+/*
+ * @Description   Parameters for selecting a location for requested manipulation
+ */
+typedef struct ioc_fm_manip_hdr_info_t {
+	ioc_net_header_type		hdr;		/**< Header selection */
+	ioc_fm_pcd_hdr_index		hdr_index;
+			/**< Relevant only for MPLS, VLAN and tunneled IP.
+			 * Otherwise should be cleared.
+			 */
+	bool				by_field;
+			/**< TRUE if the location of manipulation is according
+			 * to some field in the specific header
+			 */
+	ioc_fm_pcd_fields_u		full_field;
+			/**< Relevant only when by_field = TRUE: Extract field
+			 */
+} ioc_fm_manip_hdr_info_t;
+
+/*
+ * @Description   Parameters for defining header removal by header type
+ */
+typedef struct ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t {
+	ioc_fm_pcd_manip_hdr_rmv_by_hdr_type	type;
+			/**< Selection of header removal location */
+	union {
+	ioc_fm_manip_hdr_info_t		hdr_info;
+		/**< Relevant when type = e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START
+		 */
+	ioc_fm_pcd_manip_hdr_rmv_specific_l2	specific_l2;
+		/**< Relevant when type = e_IOC_FM_PCD_MANIP_BY_HDR_SPECIFIC_L2;
+		 * Defines which L2 headers to remove.
+		 */
+	} u;
+} ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t;
+
+/*
+ * @Description   Parameters for configuring IP fragmentation manipulation
+ */
+typedef struct ioc_fm_pcd_manip_frag_ip_params_t {
+	uint16_t			size_for_fragmentation;
+		/**< If length of the frame is greater than this value, IP
+		 * fragmentation will be executed.
+		 */
+	bool			sg_bpid_en;
+		/**< Enable a dedicated buffer pool id for the Scatter/Gather
+		 * buffer allocation; If disabled, the Scatter/Gather buffer
+		 * will be allocated from the same pool as the received frame's
+		 * buffer.
+		 */
+	uint8_t			sg_bpid;
+		/**< Scatter/Gather buffer pool id; This parameter is relevant
+		 * when 'sg_bpid_en=TRUE'; Same LIODN number is used for these
+		 * buffers as for the received frames buffers, so buffers of
+		 * this pool need to be allocated in the same memory area as the
+		 * received buffers. If the received buffers arrive from
+		 * different sources, the Scatter/Gather BP id should be mutual
+		 * to all these sources.
+		 */
+	ioc_fm_pcd_manip_donot_frag_action  donot_frag_action;
+		/**< Don't Fragment Action - If an IP packet is larger than MTU
+		 * and its DF bit is set, then this field will determine the
+		 * action to be taken.
+		 */
+} ioc_fm_pcd_manip_frag_ip_params_t;
+
+/*
+ * @Description   Parameters for configuring IP reassembly manipulation.
+ *
+ *		  This is a common structure for both IPv4 and IPv6 reassembly
+ *		  manipulation. For reassembly of both IPv4 and IPv6, make sure
+ *		  to set the 'hdr' field in ioc_fm_pcd_manip_reassem_params_t to
+ *		  IOC_header_type_ipv_6.
+ */
+typedef struct ioc_fm_pcd_manip_reassem_ip_params_t {
+	uint8_t			relative_scheme_id[2];
+			/**< Partition relative scheme id: relativeSchemeId[0] -
+			 * Relative scheme ID for IPV4 Reassembly manipulation;
+			 * relativeSchemeId[1] -  Relative scheme ID for IPV6
+			 * Reassembly manipulation; NOTE: The following comment
+			 * is relevant only for FMAN v2 devices: Relative scheme
+			 * ID for IPv4/IPv6 Reassembly manipulation must be
+			 * smaller than the user schemes id to ensure that the
+			 * reassembly's schemes will be first match. The
+			 * remaining schemes, if defined, should have higher
+			 * relative scheme ID.
+			 */
+	uint32_t			non_consistent_sp_fqid;
+			/**< In case that other fragments of the frame
+			 * corresponds to different storage profile than the
+			 * opening fragment (Non-Consistent-SP state) then one
+			 * of two possible scenarios occurs: if
+			 * 'nonConsistentSpFqid != 0', the reassembled frame
+			 * will be enqueued to this fqid, otherwise a 'Non
+			 * Consistent SP' bit will be set in the FD[status].
+			 */
+	uint8_t				data_mem_id;
+			/**< Memory partition ID for the IPR's external tables
+			 * structure
+			 */
+	uint16_t			data_liodn_offset;
+			/**< LIODN offset for access the IPR's external tables
+			 * structure.
+			 */
+	uint16_t			min_frag_size[2];
+			/**< Minimum fragment size: minFragSize[0] - for ipv4,
+			 * minFragSize[1] - for ipv6
+			 */
+	ioc_fm_pcd_manip_reassem_ways_number   num_of_frames_per_hash_entry[2];
+			/**< Number of frames per hash entry needed for
+			 * reassembly process: num_of_frames_per_hash_entry[0] -
+			 * for ipv4 (max value is
+			 * e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH);
+			 * num_of_frames_per_hash_entry[1] - for ipv6 (max value
+			 * is e_IOC_FM_PCD_MANIP_SIX_WAYS_HASH).
+			 */
+	uint16_t			max_num_frames_in_process;
+			/**< Number of frames which can be processed by
+			 * Reassembly in the same time; Must be power of 2; In
+			 * the case num_of_frames_per_hash_entry ==
+			 * e_IOC_FM_PCD_MANIP_FOUR_WAYS_HASH,
+			 * max_num_frames_in_process has to be in the range of
+			 * 4 - 512; In the case num_of_frames_per_hash_entry ==
+			 * e_IOC_FM_PCD_MANIP_EIGHT_WAYS_HASH,
+			 * max_num_frames_in_process has to be in the range of
+			 * 8 - 2048.
+			 */
+	ioc_fm_pcd_manip_reassem_time_out_mode  time_out_mode;
+			/**< Expiration delay initialized by Reassembly process
+			 */
+	uint32_t			fqid_for_time_out_frames;
+			/**< FQID in which time out frames will enqueue during
+			 * Time Out Process
+			 */
+	uint32_t			timeout_threshold_for_reassm_process;
+			/**< Represents the time interval in microseconds which
+			 * defines if opened frame (at least one fragment was
+			 * processed but not all the fragments)is found as too
+			 * old
+			 */
+} ioc_fm_pcd_manip_reassem_ip_params_t;
+
+/*
+ * @Description   Parameters for defining IPSEC manipulation
+ */
+typedef struct ioc_fm_pcd_manip_special_offload_ipsec_params_t {
+	bool	decryption;
+			/**< TRUE if being used in decryption direction;
+			 * FALSE if being used in encryption direction.
+			 */
+	bool	ecn_copy;
+			/**< TRUE to copy the ECN bits from inner/outer to
+			 * outer/inner (direction depends on the 'decryption'
+			 * field).
+			 */
+	bool	dscp_copy;
+			/**< TRUE to copy the DSCP bits from inner/outer to
+			 * outer/inner (direction depends on the 'decryption'
+			 * field).
+			 */
+	bool	variable_ip_hdr_len;
+			/**< TRUE for supporting variable IP header length in
+			 * decryption.
+			 */
+	bool	variable_ip_version;
+			/**< TRUE for supporting both IP version on the same SA
+			 * in encryption
+			 */
+	uint8_t outer_ip_hdr_len;
+			/**< If 'variable_ip_version == TRUE' than this field
+			 * must be set to non-zero value; It is specifies the
+			 * length of the outer IP header that was configured in
+			 * the corresponding SA.
+			 */
+	uint16_t	arw_size;
+			/**< if <> '0' then will perform ARW check for this SA;
+			 * The value must be a multiplication of 16
+			 */
+	void	*arw_addr;
+			/**< if arwSize <> '0' then this field must be set to
+			 * non-zero value; MUST be allocated from FMAN's MURAM
+			 * that the post-sec op-port belong Must be 4B aligned.
+			 * Required MURAM size is
+			 * '(NEXT_POWER_OF_2(arwSize+32))/8+4' Bytes
+			 */
+} ioc_fm_pcd_manip_special_offload_ipsec_params_t;
+
+/*
+ * @Description   Parameters for configuring CAPWAP fragmentation manipulation
+ *
+ *		  Restrictions:
+ *		  - Maximum number of fragments per frame is 16.
+ *		  - Transmit confirmation is not supported.
+ *		  - Fragmentation nodes must be set as the last PCD action (i.e.
+ *		    the corresponding CC node key must have next engine set to
+ *		    e_FM_PCD_DONE).
+ *		  - Only BMan buffers shall be used for frames to be fragmented.
+ *		  - NOTE: The following comment is relevant only for FMAN v3
+ *		    devices: IPF does not support VSP. Therefore, on the same
+ *		    port where we have IPF we cannot support VSP.
+ */
+typedef struct ioc_fm_pcd_manip_frag_capwap_params_t {
+	uint16_t	size_for_fragmentation;
+			/**< If length of the frame is greater than this value,
+			 * CAPWAP fragmentation will be executed.
+			 */
+	bool		sg_bpid_en;
+			/**< Enable a dedicated buffer pool id for the
+			 * Scatter/Gather buffer allocation; If disabled, the
+			 * Scatter/Gather buffer will be allocated from the same
+			 * pool as the received frame's buffer.
+			 */
+	uint8_t		sg_bpid;
+			/**< Scatter/Gather buffer pool id; This parameters is
+			 * relevant when 'sg_bpidEn=TRUE'; Same LIODN number is
+			 * used for these buffers as for the received frames
+			 * buffers, so buffers of this pool need to be allocated
+			 * in the same memory area as the received buffers. If
+			 * the received buffers arrive from different sources,
+			 * the Scatter/Gather BP id should be mutual to all
+			 * these sources.
+			 */
+	bool	compress_mode_en;
+			/**< CAPWAP Header Options Compress Enable mode; When
+			 * this mode is enabled then only the first fragment
+			 * include the CAPWAP header options field (if user
+			 * provides it in the input frame) and all other
+			 * fragments exclude the CAPWAP options field (CAPWAP
+			 * header is updated accordingly).
+			 */
+} ioc_fm_pcd_manip_frag_capwap_params_t;
+
+/*
+ * @Description   Parameters for configuring CAPWAP reassembly manipulation.
+ *
+ *		  Restrictions:
+ *		  - Application must define one scheme to catch the reassembled
+ *		    frames.
+ *		  - Maximum number of fragments per frame is 16.
+ */
+typedef struct ioc_fm_pcd_manip_reassem_capwap_params_t {
+	uint8_t		relative_scheme_id;
+			/**< Partition relative scheme id; NOTE: this id must be
+			 * smaller than the user schemes id to ensure that the
+			 * reassembly scheme will be first match; Rest schemes,
+			 * if defined, should have higher relative scheme ID.
+			 */
+	uint8_t		data_mem_id;
+			/**< Memory partition ID for the IPR's external tables
+			 * structure
+			 */
+	uint16_t	data_liodn_offset;
+			/**< LIODN offset for access the IPR's external tables
+			 * structure.
+			 */
+	uint16_t	max_reassembled_frame_length;
+			/**< The maximum CAPWAP reassembled frame length in
+			 * bytes; If maxReassembledFrameLength == 0, any
+			 * successful reassembled frame length is considered as
+			 * a valid length; if maxReassembledFrameLength > 0, a
+			 * successful reassembled frame which its length exceeds
+			 * this value is considered as an error frame (FD
+			 * status[CRE] bit is set).
+			 */
+	ioc_fm_pcd_manip_reassem_ways_number   num_of_frames_per_hash_entry;
+			/**< Number of frames per hash entry needed for
+			 * reassembly process
+			 */
+	uint16_t	max_num_frames_in_process;
+			/**< Number of frames which can be processed by
+			 * reassembly in the same time; Must be power of 2; In
+			 * the case num_of_frames_per_hash_entry ==
+			 * e_FM_PCD_MANIP_FOUR_WAYS_HASH,
+			 * max_num_frames_in_process has to be in the range of
+			 * 4 - 512; In the case num_of_frames_per_hash_entry ==
+			 * e_FM_PCD_MANIP_EIGHT_WAYS_HASH,
+			 * max_num_frames_in_process has to be in the range of
+			 * 8 - 2048.
+			 */
+	ioc_fm_pcd_manip_reassem_time_out_mode  time_out_mode;
+			/**< Expiration delay initialized by Reassembly process
+			 */
+	uint32_t	fqid_for_time_out_frames;
+			/**< FQID in which time out frames will enqueue during
+			 * Time Out Process; Recommended value for this field is
+			 * 0; in this way timed-out frames will be discarded
+			 */
+	uint32_t	timeout_threshold_for_reassm_process;
+			/**< Represents the time interval in microseconds which
+			 * defines if opened frame (at least one fragment was
+			 * processed but not all the fragments)is found as too
+			 * old
+			 */
+} ioc_fm_pcd_manip_reassem_capwap_params_t;
+
+/*
+ * @Description   structure for defining CAPWAP manipulation
+ */
+typedef struct ioc_fm_pcd_manip_special_offload_capwap_params_t {
+	bool			dtls;
+			/**< TRUE if continue to SEC DTLS encryption */
+	ioc_fm_pcd_manip_hdr_qos_src   qos_src;
+			/**< TODO */
+} ioc_fm_pcd_manip_special_offload_capwap_params_t;
+
+/*
+ * @Description   Parameters for defining special offload manipulation
+ */
+typedef struct ioc_fm_pcd_manip_special_offload_params_t {
+	ioc_fm_pcd_manip_special_offload_type		type;
+		/**< Type of special offload manipulation */
+	union {
+	ioc_fm_pcd_manip_special_offload_ipsec_params_t ipsec;
+		/**< Parameters for IPSec; Relevant when type =
+		 * e_IOC_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC
+		 */
+
+	ioc_fm_pcd_manip_special_offload_capwap_params_t capwap;
+		/**< Parameters for CAPWAP; Relevant when type =
+		 * e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP
+		 */
+	} u;
+} ioc_fm_pcd_manip_special_offload_params_t;
+
+/*
+ * @Description   Parameters for defining generic removal manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_rmv_generic_params_t {
+	uint8_t			offset;
+		/**< Offset from beginning of header to the start location of
+		 * the removal
+		 */
+	uint8_t			size;	/**< Size of removed section */
+} ioc_fm_pcd_manip_hdr_rmv_generic_params_t;
+
+/*
+ * @Description   Parameters for defining insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_t {
+	uint8_t size;		/**< size of inserted section */
+	uint8_t *p_data;	/**< data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_t;
+
+/*
+ * @Description   Parameters for defining generic insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_generic_params_t {
+	uint8_t			offset;
+			/**< Offset from beginning of header to the start
+			 * location of the insertion
+			 */
+	uint8_t			size;	/**< Size of inserted section */
+	bool			replace;
+			/**< TRUE to override (replace) existing data at
+			 * 'offset', FALSE to insert
+			 */
+	uint8_t			*p_data;
+			/**< Pointer to data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_generic_params_t;
+
+/*
+ * @Description   Parameters for defining header manipulation VLAN DSCP To Vpri
+ *		  translation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t {
+	uint8_t		dscp_to_vpri_table[IOC_FM_PCD_MANIP_DSCP_TO_VLAN_TRANS];
+		/**< A table of VPri values for each DSCP value; The index is
+		 * the D_SCP value (0-0x3F) and the value is the corresponding
+		 * VPRI (0-15).
+		 */
+	uint8_t		vpri_def_val;
+		/**< 0-7, Relevant only if if update_type =
+		 * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN, this field
+		 * is the Q Tag default value if the IP header is not found.
+		 */
+} ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t;
+
+/*
+ * @Description   Parameters for defining header manipulation VLAN fields
+ *		  updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_vlan_t {
+	ioc_fm_pcd_manip_hdr_field_update_vlan  update_type;
+		/**< Selects VLAN update type */
+	union {
+	uint8_t					vpri;
+		/**< 0-7, Relevant only if If update_type =
+		 * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_PRI, this is the new
+		 * VLAN pri.
+		 */
+	ioc_fm_pcd_manip_hdr_field_update_vlan_dscp_to_vpri_t	dscp_to_vpri;
+		/**<  Parameters structure, Relevant only if update_type =
+		 * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN.
+		 */
+	} u;
+} ioc_fm_pcd_manip_hdr_field_update_vlan_t;
+
+/*
+ * @Description   Parameters for defining header manipulation IPV4 fields
+ *		  updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_ipv4_t {
+	ioc_ipv4_hdr_manip_update_flags_t	valid_updates;
+			/**< ORed flag, selecting the required updates */
+	uint8_t		tos;
+			/**< 8 bit New TOS; Relevant if valid_updates contains
+			 * IOC_HDR_MANIP_IPV4_TOS
+			 */
+	uint16_t	id;
+			/**< 16 bit New IP ID; Relevant only if
+			 * valid_updates contains IOC_HDR_MANIP_IPV4_ID
+			 */
+	uint32_t	src;
+			/**< 32 bit New IP SRC; Relevant only if
+			 * valid_updates contains IOC_HDR_MANIP_IPV4_SRC
+			 */
+	uint32_t	dst;
+			/**< 32 bit New IP DST; Relevant only if
+			 * valid_updates contains IOC_HDR_MANIP_IPV4_DST
+			 */
+} ioc_fm_pcd_manip_hdr_field_update_ipv4_t;
+
+/*
+ * @Description   Parameters for defining header manipulation IPV6 fields
+ *		  updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_ipv6_t {
+	ioc_ipv6_hdr_manip_update_flags_t	valid_updates;
+			/**< ORed flag, selecting the required updates */
+	uint8_t		traffic_class;
+			/**< 8 bit New Traffic Class; Relevant if valid_updates
+			 * contains IOC_HDR_MANIP_IPV6_TC
+			 */
+	uint8_t		src[ioc_net_hf_ipv6_addr_size];
+			/**< 16 byte new IP SRC; Relevant only if valid_updates
+			 * contains IOC_HDR_MANIP_IPV6_SRC
+			 */
+	uint8_t		dst[ioc_net_hf_ipv6_addr_size];
+			/**< 16 byte new IP DST; Relevant only if valid_updates
+			 * contains IOC_HDR_MANIP_IPV6_DST
+			 */
+} ioc_fm_pcd_manip_hdr_field_update_ipv6_t;
+
+/*
+ * @Description   Parameters for defining header manipulation TCP/UDP fields
+ *		  updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t {
+	ioc_tcp_udp_hdr_manip_update_flags_t	valid_updates;
+			/**< ORed flag, selecting the required updates */
+	uint16_t	src;
+			/**< 16 bit New TCP/UDP SRC; Relevant only if
+			 * valid_updates contains IOC_HDR_MANIP_TCP_UDP_SRC
+			 */
+	uint16_t	dst;
+			/**< 16 bit New TCP/UDP DST; Relevant only if
+			 * valid_updates contains IOC_HDR_MANIP_TCP_UDP_DST
+			 */
+} ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t;
+
+/*
+ * @Description   Parameters for defining header manipulation fields updates
+ */
+typedef struct ioc_fm_pcd_manip_hdr_field_update_params_t {
+	ioc_fm_pcd_manip_hdr_field_update_type	type;
+			/**< Type of header field update manipulation */
+	union {
+	ioc_fm_pcd_manip_hdr_field_update_vlan_t	vlan;
+			/**< Parameters for VLAN update. Relevant when type =
+			 * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN
+			 */
+	ioc_fm_pcd_manip_hdr_field_update_ipv4_t	ipv4;
+			/**< Parameters for IPv4 update. Relevant when type =
+			 * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4
+			 */
+	ioc_fm_pcd_manip_hdr_field_update_ipv6_t	ipv6;
+			/**< Parameters for IPv6 update. Relevant when type =
+			 * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6
+			 */
+	ioc_fm_pcd_manip_hdr_field_update_tcp_udp_t tcp_udp;
+			/**< Parameters for TCP/UDP update. Relevant when type =
+			 * e_IOC_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP
+			 */
+	} u;
+} ioc_fm_pcd_manip_hdr_field_update_params_t;
+
+/*
+ * @Description   Parameters for defining custom header manipulation for IP
+ *		  replacement
+ */
+typedef struct ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t {
+	ioc_fm_pcd_manip_hdr_custom_ip_replace  replace_type;
+			/**< Selects replace update type */
+	bool	dec_ttl_hl;
+			/**< Decrement TTL (IPV4) or Hop limit (IPV6) by 1 */
+	bool	update_ipv4_id;
+			/**< Relevant when replace_type =
+			 * e_IOC_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4
+			 */
+	uint16_t id;
+		/**< 16 bit New IP ID; Relevant only if update_ipv4_id = TRUE */
+	uint8_t	hdr_size;
+			/**< The size of the new IP header */
+	uint8_t	hdr[IOC_FM_PCD_MANIP_MAX_HDR_SIZE];
+			/**< The new IP header */
+} ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t;
+
+/*
+ * @Description   Parameters for defining custom header manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_custom_params_t {
+	ioc_fm_pcd_manip_hdr_custom_type		type;
+			/**< Type of header field update manipulation */
+	union {
+	ioc_fm_pcd_manip_hdr_custom_ip_hdr_replace_t	ip_hdr_replace;
+			/**< Parameters IP header replacement */
+	} u;
+} ioc_fm_pcd_manip_hdr_custom_params_t;
+
+/*
+ * @Description   Parameters for defining specific L2 insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t {
+	ioc_fm_pcd_manip_hdr_insrt_specific_l2  specific_l2;
+			/**< Selects which L2 headers to insert */
+	bool					update;
+			/**< TRUE to update MPLS header */
+	uint8_t				size;
+			/**< size of inserted section */
+	uint8_t				*p_data;
+			/**< data to be inserted */
+} ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t;
+
+/*
+ * @Description   Parameters for defining IP insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_ip_params_t {
+	bool	calc_l4_checksum;
+			/**< Calculate L4 checksum. */
+	ioc_fm_pcd_manip_hdr_qos_mapping_mode   mapping_mode;
+			/**< TODO */
+	uint8_t last_pid_offset;
+			/**< the offset of the last Protocol within the inserted
+			 * header
+			 */
+	uint16_t  id;	/**< 16 bit New IP ID */
+	bool	donot_frag_overwrite;
+			/**< IPv4 only. DF is overwritten with the hash-result
+			 * next-to-last byte. This byte is configured to be
+			 * overwritten when RPD is set.
+			 */
+	uint8_t	last_dst_offset;
+			/**< IPv6 only. if routing extension exist, user should
+			 * set the offset of the destination address in order
+			 * to calculate UDP checksum pseudo header; Otherwise
+			 * set it to '0'.
+			 */
+	ioc_fm_pcd_manip_hdr_insrt_t insrt;
+			/**< size and data to be inserted. */
+} ioc_fm_pcd_manip_hdr_insrt_ip_params_t;
+
+/*
+ * @Description   Parameters for defining header insertion manipulation by
+ *		  header type
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t {
+	ioc_fm_pcd_manip_hdr_insrt_by_hdr_type	type;
+			/**< Selects manipulation type */
+	union {
+	ioc_fm_pcd_manip_hdr_insrt_specific_l2_params_t  specific_l2_params;
+			/**< Used when type =
+			 * e_IOC_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2: Selects
+			 * which L2 headers to remove
+			 */
+	ioc_fm_pcd_manip_hdr_insrt_ip_params_t	ip_params;
+			/**< Used when type = e_FM_PCD_MANIP_INSRT_BY_HDR_IP */
+	ioc_fm_pcd_manip_hdr_insrt_t		insrt;
+			/**< Used when type is one of
+			 * e_FM_PCD_MANIP_INSRT_BY_HDR_UDP,
+			 * e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE, or
+			 * e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP
+			 */
+	} u;
+} ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t;
+
+/*
+ * @Description   Parameters for defining header insertion manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_insrt_params_t {
+	ioc_fm_pcd_manip_hdr_insrt_type			type;
+			/**< Type of insertion manipulation */
+	union {
+	ioc_fm_pcd_manip_hdr_insrt_by_hdr_params_t	by_hdr;
+			/**< Parameters for defining header insertion
+			 * manipulation by header type, relevant if 'type' =
+			 * e_IOC_FM_PCD_MANIP_INSRT_BY_HDR
+			 */
+	ioc_fm_pcd_manip_hdr_insrt_generic_params_t	generic;
+			/**< Parameters for defining generic header insertion
+			 * manipulation, relevant if type =
+			 * e_IOC_FM_PCD_MANIP_INSRT_GENERIC
+			 */
+	} u;
+} ioc_fm_pcd_manip_hdr_insrt_params_t;
+
+/*
+ * @Description   Parameters for defining header removal manipulation
+ */
+typedef struct ioc_fm_pcd_manip_hdr_rmv_params_t {
+	ioc_fm_pcd_manip_hdr_rmv_type		type;
+			/**< Type of header removal manipulation */
+	union {
+	ioc_fm_pcd_manip_hdr_rmv_by_hdr_params_t   by_hdr;
+			/**< Parameters for defining header removal manipulation
+			 * by header type, relevant if type =
+			 * e_IOC_FM_PCD_MANIP_RMV_BY_HDR
+			 */
+	ioc_fm_pcd_manip_hdr_rmv_generic_params_t  generic;
+			/**< Parameters for defining generic header removal
+			 * manipulation, relevant if type =
+			 * e_IOC_FM_PCD_MANIP_RMV_GENERIC
+			 */
+	} u;
+} ioc_fm_pcd_manip_hdr_rmv_params_t;
+
+/*
+ * @Description   Parameters for defining header manipulation node
+ */
+typedef struct ioc_fm_pcd_manip_hdr_params_t {
+	bool					rmv;
+			/**< TRUE, to define removal manipulation */
+	ioc_fm_pcd_manip_hdr_rmv_params_t	rmv_params;
+			/**< Parameters for removal manipulation, relevant if
+			 * 'rmv' = TRUE
+			 */
+
+	bool					insrt;
+			/**< TRUE, to define insertion manipulation */
+	ioc_fm_pcd_manip_hdr_insrt_params_t	insrt_params;
+			/**< Parameters for insertion manipulation, relevant if
+			 * 'insrt' = TRUE
+			 */
+
+	bool					field_update;
+			/**< TRUE, to define field update manipulation */
+	ioc_fm_pcd_manip_hdr_field_update_params_t  field_update_params;
+			/**< Parameters for field update manipulation, relevant
+			 * if 'fieldUpdate' = TRUE
+			 */
+
+	bool					custom;
+			/**< TRUE, to define custom manipulation */
+	ioc_fm_pcd_manip_hdr_custom_params_t	custom_params;
+			/**< Parameters for custom manipulation, relevant if
+			 * 'custom' = TRUE
+			 */
+
+	bool				donot_parse_after_manip;
+			/**< FALSE to activate the parser a second time after
+			 * completing the manipulation on the frame
+			 */
+} ioc_fm_pcd_manip_hdr_params_t;
+
+/*
+ * @Description   structure for defining fragmentation manipulation
+ */
+typedef struct ioc_fm_pcd_manip_frag_params_t {
+	ioc_net_header_type			hdr;
+			/**< Header selection */
+	union {
+	ioc_fm_pcd_manip_frag_capwap_params_t	capwap_frag;
+			/**< Parameters for defining CAPWAP fragmentation,
+			 * relevant if 'hdr' = HEADER_TYPE_CAPWAP
+			 */
+	ioc_fm_pcd_manip_frag_ip_params_t   ip_frag;
+			/**< Parameters for defining IP fragmentation, relevant
+			 * if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6
+			 */
+	} u;
+} ioc_fm_pcd_manip_frag_params_t;
+
+/*
+ * @Description   structure for defining reassemble manipulation
+ */
+typedef struct ioc_fm_pcd_manip_reassem_params_t {
+	ioc_net_header_type			hdr;
+			/**< Header selection */
+	union {
+	ioc_fm_pcd_manip_reassem_capwap_params_t capwap_reassem;
+			/**< Parameters for defining CAPWAP reassembly, relevant
+			 * if 'hdr' = HEADER_TYPE_CAPWAP
+			 */
+	ioc_fm_pcd_manip_reassem_ip_params_t	ip_reassem;
+			/**< Parameters for defining IP reassembly, relevant if
+			 * 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6
+			 */
+	} u;
+} ioc_fm_pcd_manip_reassem_params_t;
+
+/*
+ * @Description   Parameters for defining a manipulation node
+ */
+struct fm_pcd_manip_params_t {
+	ioc_fm_pcd_manip_type type;
+		/**< Selects type of manipulation node */
+	union {
+		ioc_fm_pcd_manip_hdr_params_t hdr;
+			/**< Parameters for defining header manipulation node */
+		ioc_fm_pcd_manip_reassem_params_t reassem;
+			/**< Parameters for defining reassembly manipulation
+			 * node
+			 */
+		ioc_fm_pcd_manip_frag_params_t frag;
+			/**< Parameters for defining fragmentation manipulation
+			 * node
+			 */
+		ioc_fm_pcd_manip_special_offload_params_t special_offload;
+			/**< Parameters for defining special offload
+			 * manipulation node
+			 */
+	} u;
+	void *p_next_manip;
+		/**< Handle to another (previously defined) manipulation node;
+		 * Allows concatenation of manipulation actions. This parameter
+		 * is optional and may be NULL.
+		 */
+};
+
+typedef struct ioc_fm_pcd_manip_params_t {
+	struct fm_pcd_manip_params_t param;
+	void *id;
+} ioc_fm_pcd_manip_params_t;
+
+/*
+ * @Description   Structure for retrieving IP reassembly statistics
+ */
+typedef struct ioc_fm_pcd_manip_reassem_ip_stats_t {
+	/* common counters for both IPv4 and IPv6 */
+	uint32_t	timeout;
+		/**< Counts the number of TimeOut occurrences */
+	uint32_t	rfd_pool_busy;
+		/**< Counts the number of failed attempts to allocate a
+		 * Reassembly Frame Descriptor
+		 */
+	uint32_t	internal_buffer_busy;
+		/**< Counts the number of times an internal buffer busy occurred
+		 */
+	uint32_t	external_buffer_busy;
+		/**< Counts the number of times external buffer busy occurred */
+	uint32_t	sg_fragments;
+		/**< Counts the number of Scatter/Gather fragments */
+	uint32_t	dma_semaphore_depletion;
+		/**< Counts the number of failed attempts to allocate a DMA
+		 * semaphore
+		 */
+	uint32_t	non_consistent_sp;
+		/**< Counts the number of Non Consistent Storage Profile events
+		 * for successfully reassembled frames
+		 */
+struct {
+	uint32_t	successfully_reassembled;
+		/**< Counts the number of successfully reassembled frames */
+	uint32_t	valid_fragments;
+		/**< Counts the total number of valid fragments that have been
+		 * processed for all frames
+		 */
+	uint32_t	processed_fragments;
+		/**< Counts the number of processed fragments (valid and error
+		 * fragments) for all frames
+		 */
+	uint32_t	malformed_fragments;
+		/**< Counts the number of malformed fragments processed for all
+		 * frames
+		 */
+	uint32_t	discarded_fragments;
+		/**< Counts the number of fragments discarded by the reassembly
+		 * process
+		 */
+	uint32_t	auto_learn_busy;
+		/**< Counts the number of times a busy condition occurs when
+		 * attempting to access an IP-Reassembly Automatic Learning Hash
+		 * set
+		 */
+	uint32_t	more_than16fragments;
+		/**< Counts the fragment occurrences in which the number of
+		 * fragments-per-frame exceeds 16
+		 */
+	} specific_hdr_statistics[2];
+		/**< slot '0' is for IPv4, slot '1' is for IPv6 */
+} ioc_fm_pcd_manip_reassem_ip_stats_t;
+
+/*
+ * @Description   Structure for retrieving IP fragmentation statistics
+ */
+typedef struct ioc_fm_pcd_manip_frag_ip_stats_t {
+	uint32_t	total_frames;
+			/**< Number of frames that passed through the
+			 * manipulation node
+			 */
+	uint32_t	fragmented_frames;
+			/**< Number of frames that were fragmented */
+	uint32_t	generated_fragments;
+			/**< Number of fragments that were generated */
+} ioc_fm_pcd_manip_frag_ip_stats_t;
+
+/*
+ * @Description   Structure for retrieving CAPWAP reassembly statistics
+ */
+typedef struct ioc_fm_pcd_manip_reassem_capwap_stats_t {
+	uint32_t	timeout;
+			/**< Counts the number of timeout occurrences */
+	uint32_t	rfd_pool_busy;
+			/**< Counts the number of failed attempts to allocate a
+			 * Reassembly Frame Descriptor
+			 */
+	uint32_t	internal_buffer_busy;
+			/**< Counts the number of times an internal buffer busy
+			 * occurred
+			 */
+	uint32_t	external_buffer_busy;
+			/**< Counts the number of times external buffer busy
+			 * occurred
+			 */
+	uint32_t	sg_fragments;
+			/**< Counts the number of Scatter/Gather fragments */
+	uint32_t	dma_semaphore_depletion;
+			/**< Counts the number of failed attempts to allocate a
+			 * DMA semaphore
+			 */
+	uint32_t	successfully_reassembled;
+			/**< Counts the number of successfully reassembled
+			 * frames
+			 */
+	uint32_t	valid_fragments;
+			/**< Counts the total number of valid fragments that
+			 * have been processed for all frames
+			 */
+	uint32_t	processed_fragments;
+			/**< Counts the number of processed fragments (valid and
+			 * error fragments) for all frames
+			 */
+	uint32_t	malformed_fragments;
+			/**< Counts the number of malformed fragments processed
+			 * for all frames
+			 */
+	uint32_t	auto_learn_busy;
+			/**< Counts the number of times a busy condition occurs
+			 * when attempting to access an Reassembly Automatic
+			 * Learning Hash set
+			 */
+	uint32_t	discarded_fragments;
+			/**< Counts the number of fragments discarded by the
+			 * reassembly process
+			 */
+	uint32_t	more_than16fragments;
+			/**< Counts the fragment occurrences in which the number
+			 * of fragments-per-frame exceeds 16
+			 */
+	uint32_t	exceed_max_reassembly_frame_len;
+			/**< ounts the number of times that a successful
+			 * reassembled frame length exceeds
+			 * MaxReassembledFrameLength value
+			 */
+} ioc_fm_pcd_manip_reassem_capwap_stats_t;
+
+/*
+ * @Description   Structure for retrieving CAPWAP fragmentation statistics
+ */
+typedef struct ioc_fm_pcd_manip_frag_capwap_stats_t {
+	uint32_t	total_frames;
+			/**< Number of frames that passed through the
+			 * manipulation node
+			 */
+	uint32_t	fragmented_frames;
+			/**< Number of frames that were fragmented */
+	uint32_t	generated_fragments;
+			/**< Number of fragments that were generated */
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+	uint8_t	sg_allocation_failure;
+			/**< Number of allocation failure of s/g buffers */
+#endif /* (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) */
+} ioc_fm_pcd_manip_frag_capwap_stats_t;
+
+/*
+ * @Description   Structure for retrieving reassembly statistics
+ */
+typedef struct ioc_fm_pcd_manip_reassem_stats_t {
+	union {
+	ioc_fm_pcd_manip_reassem_ip_stats_t  ip_reassem;
+			/**< Structure for IP reassembly statistics */
+	ioc_fm_pcd_manip_reassem_capwap_stats_t  capwap_reassem;
+			/**< Structure for CAPWAP reassembly statistics */
+	} u;
+} ioc_fm_pcd_manip_reassem_stats_t;
+
+/*
+ * @Description   structure for retrieving fragmentation statistics
+ */
+typedef struct ioc_fm_pcd_manip_frag_stats_t {
+	union {
+	ioc_fm_pcd_manip_frag_ip_stats_t	ip_frag;
+			/**< Structure for IP fragmentation statistics */
+	ioc_fm_pcd_manip_frag_capwap_stats_t capwap_frag;
+			/**< Structure for CAPWAP fragmentation statistics */
+	} u;
+} ioc_fm_pcd_manip_frag_stats_t;
+
+/*
+ * @Description   structure for defining manipulation statistics
+ */
+typedef struct ioc_fm_pcd_manip_stats_t {
+	union {
+	ioc_fm_pcd_manip_reassem_stats_t  reassem;
+				/**< Structure for reassembly statistics */
+	ioc_fm_pcd_manip_frag_stats_t	frag;
+				/**< Structure for fragmentation statistics */
+	} u;
+} ioc_fm_pcd_manip_stats_t;
+
+/*
+ * @Description   Parameters for acquiring manipulation statistics
+ */
+typedef struct ioc_fm_pcd_manip_get_stats_t {
+	void				*id;
+	ioc_fm_pcd_manip_stats_t	stats;
+} ioc_fm_pcd_manip_get_stats_t;
+
+/*
+ * @Description   Parameters for defining frame replicator group and its members
+ */
+struct fm_pcd_frm_replic_group_params_t {
+	uint8_t			max_num_of_entries;
+				/**< Maximal number of members in the group -
+				 * must be at least two
+				 */
+	uint8_t			num_of_entries;
+				/**< Number of members in the group - must be at
+				 * least 1
+				 */
+	ioc_fm_pcd_cc_next_engine_params_t
+		next_engine_params[IOC_FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES];
+				/**< Array of members' parameters */
+};
+
+typedef struct ioc_fm_pcd_frm_replic_group_params_t {
+	struct fm_pcd_frm_replic_group_params_t param;
+	void *id;
+} ioc_fm_pcd_frm_replic_group_params_t;
+
+typedef struct ioc_fm_pcd_frm_replic_member_t {
+	void *h_replic_group;
+	uint16_t member_index;
+} ioc_fm_pcd_frm_replic_member_t;
+
+typedef struct ioc_fm_pcd_frm_replic_member_params_t {
+	ioc_fm_pcd_frm_replic_member_t member;
+	ioc_fm_pcd_cc_next_engine_params_t next_engine_params;
+} ioc_fm_pcd_frm_replic_member_params_t;
+
+
+typedef struct ioc_fm_pcd_cc_key_statistics_t {
+	uint32_t	byte_count;
+			/**< This counter reflects byte count of frames that
+			 * were matched by this key.
+			 */
+	uint32_t	frame_count;
+			/**< This counter reflects count of frames that were
+			 * matched by this key.
+			 */
+	uint32_t	frame_length_range_count[IOC_FM_PCD_CC_STATS_MAX_FLR];
+			/**< These counters reflect how many frames matched this
+			 * key in 'RMON' statistics mode: Each counter holds the
+			 * number of frames of a specific frames length range,
+			 * according to the ranges provided at initialization.
+			 */
+} ioc_fm_pcd_cc_key_statistics_t;
+
+
+typedef struct ioc_fm_pcd_cc_tbl_get_stats_t {
+	void				*id;
+	uint16_t			key_index;
+	ioc_fm_pcd_cc_key_statistics_t  statistics;
+} ioc_fm_pcd_cc_tbl_get_stats_t;
+
+/*
+ * @Function	  fm_pcd_match_table_get_key_statistics
+ *
+ * @Description   This routine may be used to get statistics counters of
+ *		  specific key in a CC Node.
+ *
+ *		  If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ *		  'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ *		  node, these counters reflect how many frames passed that were
+ *		  matched this key; The total frames count will be returned in
+ *		  the counter of the first range (as only one frame length range
+ *		  was defined). If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for
+ *		  this node, the total frame count will be separated to frame
+ *		  length counters, based on provided frame length ranges.
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[in]	  key_index		Key index for adding
+ * @Param[out]	  p_key_statistics	Key statistics counters
+ *
+ * @Return	  The specific key statistics.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set().
+ */
+#define FM_PCD_IOC_MATCH_TABLE_GET_KEY_STAT \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(12), \
+		      ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/*
+ * @Function	  fm_pcd_match_table_get_miss_statistics
+ *
+ * @Description   This routine may be used to get statistics counters of miss
+ *		  entry in a CC Node.
+ *
+ *		  If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ *		  'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ *		  node, these counters reflect how many frames were not matched
+ *		  to any existing key and therefore passed through the miss
+ *		  entry; The total frames count will be returned in the counter
+ *		  of the first range (as only one frame length range was
+ *		  defined).
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[out]	  p_miss_statistics	Statistics counters for 'miss'
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set().
+ */
+
+#define FM_PCD_IOC_MATCH_TABLE_GET_MISS_STAT \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(13), \
+		      ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/*
+ * @Function	  fm_pcd_hash_table_get_miss_statistics
+ *
+ * @Description   This routine may be used to get statistics counters of 'miss'
+ *		  entry of the a hash table.
+ *
+ *		  If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ *		  'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ *		  node, these counters reflect how many frames were not matched
+ *		  to any existing key and therefore passed through the miss
+ *		  entry;
+ *
+ * @Param[in]	  h_hash_tbl		A handle to a hash table
+ * @Param[out]	  p_miss_statistics	Statistics counters for 'miss'
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ */
+#define FM_PCD_IOC_HASH_TABLE_GET_MISS_STAT \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(14), \
+		      ioc_fm_pcd_cc_tbl_get_stats_t)
+
+/*
+ * @Function	  fm_pcd_net_env_characteristics_set
+ *
+ * @Description   Define a set of Network Environment Characteristics.
+ *
+ *		  When setting an environment it is important to understand its
+ *		  application. It is not meant to describe the flows that will
+ *		  run on the ports using this environment, but what the user
+ *		  means TO DO with the PCD mechanisms in order to
+ *		  parse-classify-distribute those frames.
+ *		  By specifying a distinction unit, the user means it would use
+ *		  that option for distinction between frames at either a KeyGen
+ *		  scheme or a coarse classification action descriptor. Using
+ *		  interchangeable headers to define a unit means that the user
+ *		  is indifferent to which of the interchangeable headers is
+ *		  present in the frame, and wants the distinction to be based on
+ *		  the presence of either one of them.
+ *
+ *		  Depending on context, there are limitations to the use of
+ *		  environments. A port using the PCD functionality is bound to
+ *		  an environment. Some or even all ports may share an
+ *		  environment but also an environment per port is possible. When
+ *		  initializing a scheme, a classification plan group (see
+ *		  below), or a coarse classification tree, one of the
+ *		  initialized environments must be stated and related to. When a
+ *		  port is bound to a scheme, a classification plan group, or a
+ *		  coarse classification tree, it MUST be bound to the same
+ *		  environment.
+ *
+ *		  The different PCD modules, may relate (for flows definition)
+ *		  ONLY on distinction units as defined by their environment.
+ *		  When initializing a scheme for example, it may not choose to
+ *		  select IPV4 as a match for recognizing flows unless it was
+ *		  defined in the relating environment. In fact, to guide the
+ *		  user through the configuration of the PCD, each module's
+ *		  characterization in terms of flows is not done using protocol
+ *		  names, but using environment indexes.
+ *
+ *		  In terms of HW implementation, the list of distinction units
+ *		  sets the LCV vectors and later used for match vector,
+ *		  classification plan vectors and coarse classification
+ *		  indexing.
+ *
+ * @Param[in,out] ioc_fm_pcd_net_env_params_t	A structure defining the
+ *						distinction units for this
+ *						configuration.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_SET \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(20), \
+		      ioc_fm_pcd_net_env_params_t)
+
+/*
+ * @Function	  fm_pcd_net_env_characteristics_delete
+ *
+ * @Description   Deletes a set of Network Environment Charecteristics.
+ *
+ * @Param[in]	  ioc_fm_obj_t		The id of a Network Environment object.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_NET_ENV_CHARACTERISTICS_DELETE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(21), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_pcd_kg_scheme_set
+ *
+ * @Description   Initializing or modifying and enabling a scheme for the
+ *		  KeyGen. This routine should be called for adding or modifying
+ *		  a scheme. When a scheme needs modifying, the API requires that
+ *		  it will be rewritten. In such a case 'modify' should be TRUE.
+ *		  If the routine is called for a valid scheme and 'modify' is
+ *		  FALSE, it will return error.
+ *
+ * @Param[in,out] ioc_fm_pcd_kg_scheme_params_t		A structure of
+ *							parameters for defining
+ *							the scheme
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_KG_SCHEME_SET \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(24), \
+		      ioc_fm_pcd_kg_scheme_params_t)
+
+/*
+ * @Function	  fm_pcd_kg_scheme_delete
+ *
+ * @Description   Deleting an initialized scheme.
+ *
+ * @Param[in]	  ioc_fm_obj_t	scheme id as initialized by application at
+ *				FM_PCD_IOC_KG_SET_SCHEME
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_KG_SCHEME_DELETE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(25), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_pcd_cc_root_build
+ *
+ * @Description   This routine must be called to define a complete coarse
+ *		  classification tree. This is the way to define coarse
+ *		  classification to a certain flow - the KeyGen schemes may
+ *		  point only to trees defined in this way.
+ *
+ * @Param[in,out] ioc_fm_pcd_cc_tree_params_t	A structure of parameters to
+ *						define the tree.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_CC_ROOT_BUILD \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(26), void *)
+		/* workaround ...*/
+
+/*
+ * @Function	  fm_pcd_cc_root_delete
+ *
+ * @Description   Deleting a built tree.
+ *
+ * @Param[in]	  ioc_fm_obj_t - The id of a CC tree.
+ */
+#define FM_PCD_IOC_CC_ROOT_DELETE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(27), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_pcd_match_table_set
+ *
+ * @Description   This routine should be called for each CC (coarse
+ *		  classification) node. The whole CC tree should be built bottom
+ *		  up so that each node points to already defined nodes. p_NodeId
+ *		  returns the node Id to be used by other nodes.
+ *
+ * @Param[in,out] ioc_fm_pcd_cc_node_params_t	A structure for defining the CC
+ *						node params
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_MATCH_TABLE_SET \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(28), void *)
+		/* workaround ...*/
+
+/*
+ * @Function	  fm_pcd_match_table_delete
+ *
+ * @Description   Deleting a built node.
+ *
+ * @Param[in]	  ioc_fm_obj_t - The id of a CC node.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_MATCH_TABLE_DELETE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(29), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_pcd_cc_root_modify_next_engine
+ *
+ * @Description   Modify the Next Engine Parameters in the entry of the tree.
+ *
+ * @Param[in]	  ioc_fm_pcd_cc_tree_modify_next_engine_params_t
+ *		  Pointer to a structure with the relevant parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_cc_root_build().
+ */
+#define FM_PCD_IOC_CC_ROOT_MODIFY_NEXT_ENGINE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(30), \
+		     ioc_fm_pcd_cc_tree_modify_next_engine_params_t)
+
+/*
+ * @Function	  fm_pcd_match_table_modify_next_engine
+ *
+ * @Description   Modify the Next Engine Parameters in the relevant key entry of
+ *		  the node.
+ *
+ * @Param[in]	  ioc_fm_pcd_cc_node_modify_next_engine_params_t
+ *		  A pointer to a structure with the relevant parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set().
+ */
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_NEXT_ENGINE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(31), \
+		     ioc_fm_pcd_cc_node_modify_next_engine_params_t)
+
+/*
+ * @Function	  fm_pcd_match_table_modify_miss_next_engine
+ *
+ * @Description   Modify the Next Engine Parameters of the Miss key case of the
+ *		  node.
+ *
+ * @Param[in]	  ioc_fm_pcd_cc_node_modify_next_engine_params_t
+ *		  Pointer to a structure with the relevant parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set().
+ */
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_MISS_NEXT_ENGINE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(32), \
+		     ioc_fm_pcd_cc_node_modify_next_engine_params_t)
+
+/*
+ * @Function	  fm_pcd_match_table_remove_key
+ *
+ * @Description   Remove the key (including next engine parameters of this key)
+ *		  defined by the index of the relevant node.
+ *
+ * @Param[in]	  ioc_fm_pcd_cc_node_remove_key_params_t
+ *		  A pointer to a structure with the relevant parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only after fm_pcd_match_table_set() has been called
+ *		  for this node and for all of the nodes that lead to it.
+ */
+#define FM_PCD_IOC_MATCH_TABLE_REMOVE_KEY \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(33), \
+		     ioc_fm_pcd_cc_node_remove_key_params_t)
+
+/*
+ * @Function	  fm_pcd_match_table_add_key
+ *
+ * @Description   Add the key (including next engine parameters of this key in
+ *		  the index defined by the key_index. Note that
+ *		  'FM_PCD_LAST_KEY_INDEX' may be used when the user don't care
+ *		  about the position of the key in the table - in that case, the
+ *		  key will be automatically added by the driver in the last
+ *		  available entry.
+ *
+ * @Param[in]	  ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t
+ *		  A pointer to a structure with the relevant parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only after fm_pcd_match_table_set() has been called
+ *		  for this node and for all of the nodes that lead to it.
+ */
+#define FM_PCD_IOC_MATCH_TABLE_ADD_KEY \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(34), \
+		     ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+
+/*
+ * @Function	  fm_pcd_match_table_modify_key_and_next_engine
+ *
+ * @Description   Modify the key and Next Engine Parameters of this key in the
+ *		  index defined by key_index.
+ *
+ * @Param[in]	  ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t
+ *		  A pointer to a structure with the relevant parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set() not only of
+ *		  the relevnt node but also the node that points to this node.
+ */
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY_AND_NEXT_ENGINE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(35), \
+		     ioc_fm_pcd_cc_node_modify_key_and_next_engine_params_t)
+
+/*
+ * @Function	  fm_pcd_match_table_modify_key
+ *
+ * @Description   Modify the key at the index defined by key_index.
+ *
+ * @Param[in]	  ioc_fm_pcd_cc_node_modify_key_params_t - Pointer to a
+ * structure with the relevant parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only after fm_pcd_match_table_set() has been called
+ *		  for this node and for all of the nodes that lead to it.
+ */
+#define FM_PCD_IOC_MATCH_TABLE_MODIFY_KEY \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(36), \
+		     ioc_fm_pcd_cc_node_modify_key_params_t)
+
+/*
+ * @Function	  fm_pcd_hash_table_set
+ *
+ * @Description   This routine initializes a hash table structure.
+ *		  KeyGen hash result determines the hash bucket.
+ *		  Next, KeyGen key is compared against all keys of this bucket
+ *		  (exact match).
+ *		  Number of sets (number of buckets) of the hash equals to the
+ *		  number of 1-s in 'hash_res_mask' in the provided parameters.
+ *		  Number of hash table ways is then calculated by dividing
+ *		  'max_num_of_keys' equally between the hash sets. This is the
+ *		  maximal number of keys that a hash bucket may hold.
+ *		  The hash table is initialized empty and keys may be added to
+ *		  it following the initialization. Keys masks are not supported
+ *		  in current hash table implementation. The initialized hash
+ *		  table can be integrated as a node in a CC tree.
+ *
+ * @Param[in,out] ioc_fm_pcd_hash_table_params_t	Pointer to a structure
+ *							with the relevant
+ *							parameters.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_HASH_TABLE_SET \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), \
+		      ioc_fm_pcd_hash_table_params_t)
+
+/*
+ * @Function	  fm_pcd_hash_table_delete
+ *
+ * @Description   This routine deletes the provided hash table and released all
+ *		  its allocated resources.
+ *
+ * @Param[in]	  ioc_fm_obj_t		The ID of a hash table.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	Allowed only following fm_pcd_hash_table_set().
+ */
+#define FM_PCD_IOC_HASH_TABLE_DELETE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(37), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_pcd_hash_table_add_key
+ *
+ * @Description   This routine adds the provided key (including next engine
+ *		  parameters of this key) to the hash table.
+ *		  The key is added as the last key of the bucket that it is
+ *		  mapped to.
+ *
+ * @Param[in]	  ioc_fm_pcd_hash_table_add_key_params_t
+ *		  Pointer to a structure with the relevant parameters
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	Allowed only following fm_pcd_hash_table_set().
+ */
+#define FM_PCD_IOC_HASH_TABLE_ADD_KEY \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(39), \
+		     ioc_fm_pcd_hash_table_add_key_params_t)
+
+/*
+ * @Function	  fm_pcd_hash_table_remove_key
+ *
+ * @Description   This routine removes the requested key (including next engine
+ *		  parameters of this key) from the hash table.
+ *
+ * @Param[in]	  ioc_fm_pcd_hash_table_remove_key_params_t - Pointer to a
+ *		  structure with the relevant parameters
+ *
+ * @Return	  0 on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ */
+#define FM_PCD_IOC_HASH_TABLE_REMOVE_KEY \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(40), \
+		     ioc_fm_pcd_hash_table_remove_key_params_t)
+
+/*
+ * @Function	  fm_pcd_plcr_profile_set
+ *
+ * @Description   Sets a profile entry in the policer profile table.
+ *		  The routine overrides any existing value.
+ *
+ * @Param[in,out] ioc_fm_pcd_plcr_profile_params_t	A structure of
+ *							parameters for defining
+ *							a policer profile entry.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_PLCR_PROFILE_SET \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), \
+		      ioc_fm_pcd_plcr_profile_params_t)
+
+/*
+ * @Function	  fm_pcd_plcr_profile_delete
+ *
+ * @Description   Delete a profile entry in the policer profile table.
+ *		  The routine set entry to invalid.
+ *
+ * @Param[in]	  ioc_fm_obj_t		The id of a policer profile.
+ *
+ * @Return	  0 on success; Error code otherwise.
+ */
+#define FM_PCD_IOC_PLCR_PROFILE_DELETE  \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(41), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_pcd_manip_node_set
+ *
+ * @Description   This routine should be called for defining a manipulation
+ *		  node. A manipulation node must be defined before the CC node
+ *		  that precedes it.
+ *
+ * @Param[in]	  ioc_fm_pcd_manip_params_t	A structure of parameters
+ *						defining the manipulation.
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise.
+ */
+#define FM_PCD_IOC_MANIP_NODE_SET \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(43), \
+		      ioc_fm_pcd_manip_params_t)
+
+/*
+ * @Function	  fm_pcd_manip_node_replace
+ *
+ * @Description   Change existing manipulation node to be according to new
+ *		  requirement. (Here, it's implemented as a variant of the same
+ *		  IOCTL as for fm_pcd_manip_node_set(), and one that when
+ *		  called, the 'id' member in its 'ioc_fm_pcd_manip_params_t'
+ *		  argument is set to contain the manip node's handle)
+ *
+ * @Param[in]	  ioc_fm_pcd_manip_params_t	A structure of parameters
+ *						defining the manipulation.
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_manip_node_set().
+ */
+#define FM_PCD_IOC_MANIP_NODE_REPLACE	FM_PCD_IOC_MANIP_NODE_SET
+
+/*
+ * @Function	  fm_pcd_manip_node_delete
+ *
+ * @Description   Delete an existing manipulation node.
+ *
+ * @Param[in]	  ioc_fm_obj_t	The id of the manipulation node to delete.
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_manip_node_set().
+ */
+#define FM_PCD_IOC_MANIP_NODE_DELETE \
+		_IOW(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(44), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_pcd_manip_get_statistics
+ *
+ * @Description   Retrieve the manipulation statistics.
+ *
+ * @Param[in]	  h_manip_node		A handle to a manipulation node.
+ * @Param[out]	  p_fm_pcd_manip_stats	A structure for retrieving the
+ *					manipulation statistics.
+ *
+ * @Return	E_OK on success; Error code otherwise.
+ *
+ * @Cautions	Allowed only following fm_pcd_manip_node_set().
+ */
+#define FM_PCD_IOC_MANIP_GET_STATS \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(50), \
+		      ioc_fm_pcd_manip_get_stats_t)
+
+/*
+ * @Function	  fm_pcd_set_advanced_offload_support
+ *
+ * @Description   This routine must be called in order to support the following
+ *		  features: IP-fragmentation, IP-reassembly, IPsec,
+ *		  Header-manipulation, frame-replicator.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed only when PCD is disabled.
+ */
+#define FM_PCD_IOC_SET_ADVANCED_OFFLOAD_SUPPORT \
+		_IO(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(45))
+
+/*
+ * @Function	  fm_pcd_frm_replic_set_group
+ *
+ * @Description   Initialize a Frame Replicator group.
+ *
+ * @Param[in]	  h_fm_pcd			FM PCD module descriptor.
+ * @Param[in]	  p_frm_replic_group_param	A structure of parameters for
+ *						the initialization of the frame
+ *						replicator group.
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_SET \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(46), \
+		      ioc_fm_pcd_frm_replic_group_params_t)
+
+/*
+ * @Function	  fm_pcd_frm_replic_delete_group
+ *
+ * @Description   Delete a Frame Replicator group.
+ *
+ * @Param[in]	  h_frm_replic_group  A handle to the frame replicator group.
+ *
+ * @Return	  E_OK on success;  Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_frm_replic_set_group().
+ */
+#define FM_PCD_IOC_FRM_REPLIC_GROUP_DELETE \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(47), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_pcd_frm_replic_add_member
+ *
+ * @Description   Add the member in the index defined by the member_index.
+ *
+ * @Param[in]	  h_frm_replic_group	A handle to the frame replicator group.
+ * @Param[in]	  member_index		Member index for adding.
+ * @Param[in]	  p_member_params	A pointer to the new member parameters.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_frm_replic_set_group() of this
+ *		  group.
+ */
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_ADD \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(48), \
+			ioc_fm_pcd_frm_replic_member_params_t)
+
+/*
+ * @Function	  fm_pcd_frm_replic_remove_member
+ *
+ * @Description   Remove the member defined by the index from the relevant group
+ *
+ * @Param[in]	  h_frm_replic_group	A handle to the frame replicator group.
+ * @Param[in]	  member_index		Member index for removing.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_frm_replic_set_group() of this
+ *		  group.
+ */
+#define FM_PCD_IOC_FRM_REPLIC_MEMBER_REMOVE \
+		_IOWR(FM_IOC_TYPE_BASE, FM_PCD_IOC_NUM(49), \
+		      ioc_fm_pcd_frm_replic_member_t)
+
+/*
+ * @Group	  FM_grp Frame Manager API
+ *
+ * @Description   Frame Manager Application Programming Interface
+ *
+ * @{
+ */
+
+/*
+ * @Group	  FM_PCD_grp FM PCD
+ *
+ * @Description   Frame Manager PCD (Parse-Classify-Distribute) API.
+ *
+ *		  The FM PCD module is responsible for the initialization of all
+ *		  global classifying FM modules. This includes the parser
+ *		  general and common registers, the key generator global and
+ *		  common registers, and the policer global and common registers.
+ *		  In addition, the FM PCD SW module will initialize all required
+ *		  key generator schemes, coarse classification flows, and
+ *		  policer profiles. When FM module is configured to work with
+ *		  one of these entities, it will register to it using the FM
+ *		  PORT API. The PCD module will manage the PCD resources - i.e.
+ *		  resource management of KeyGen schemes, etc.
+ *
+ * @{
+ */
+
+/*
+ * @Collection	  General PCD defines
+ */
+#define FM_PCD_MAX_NUM_OF_PRIVATE_HDRS		2
+/**< Number of units/headers saved for user */
+
+#define FM_PCD_PRS_NUM_OF_HDRS			16
+/**< Number of headers supported by HW parser */
+#define FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS \
+		(32 - FM_PCD_MAX_NUM_OF_PRIVATE_HDRS)
+/**< Number of distinction units is limited by register size (32 bits) minus
+ *reserved bits for private headers.
+ */
+#define FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS	4
+/**< Maximum number of interchangeable headers in a distinction unit */
+#define FM_PCD_KG_NUM_OF_GENERIC_REGS		FM_KG_NUM_OF_GENERIC_REGS
+/**< Total number of generic KeyGen registers */
+#define FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY	35
+/**< Max number allowed on any configuration; For HW implementation reasons, in
+ * most cases less than this will be allowed; The driver will return an
+ * initialization error if resource is unavailable.
+ */
+#define FM_PCD_KG_NUM_OF_EXTRACT_MASKS		4
+/**< Total number of masks allowed on KeyGen extractions. */
+#define FM_PCD_KG_NUM_OF_DEFAULT_GROUPS		16
+/**< Number of default value logical groups */
+
+#define FM_PCD_PRS_NUM_OF_LABELS			32
+/**< Maximum number of SW parser labels */
+#define FM_SW_PRS_MAX_IMAGE_SIZE \
+	(FM_PCD_SW_PRS_SIZE \
+	 /*- FM_PCD_PRS_SW_OFFSET -FM_PCD_PRS_SW_TAIL_SIZE*/ \
+	 - FM_PCD_PRS_SW_PATCHES_SIZE)
+/**< Maximum size of SW parser code */
+
+#define FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE	128
+/**< Maximum size of insertion template for insert manipulation */
+
+#define FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES	64
+/**< Maximum possible entries for frame replicator group */
+/* @} */
+
+/*
+ * @Group	  FM_PCD_init_grp FM PCD Initialization Unit
+ *
+ * @Description   Frame Manager PCD Initialization Unit API
+ *
+ * @{
+ */
+
+/*
+ * @Description   Exceptions user callback routine, will be called upon an
+ *		  exception passing the exception identification.
+ *
+ * @Param[in]	  h_app		User's application descriptor.
+ * @Param[in]	  exception	The exception.
+ */
+typedef void (t_fm_pcd_exception_callback) (t_handle h_app,
+					ioc_fm_pcd_exceptions exception);
+
+/*
+ * @Description   Exceptions user callback routine, will be called upon an
+ *		  exception passing the exception identification.
+ *
+ * @Param[in]	  h_app		User's application descriptor.
+ * @Param[in]	  exception	The exception.
+ * @Param[in]	  index		id of the relevant source (may be scheme or
+ *				profile id).
+ */
+typedef void (t_fm_pcd_id_exception_callback) (t_handle	h_app,
+					ioc_fm_pcd_exceptions  exception,
+					uint16_t	index);
+
+/*
+ * @Description   A callback for enqueuing frame onto a QM queue.
+ *
+ * @Param[in]	  h_qm_arg	Application's handle passed to QM module on
+ *				enqueue.
+ * @Param[in]	  p_fd		Frame descriptor for the frame.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ */
+typedef uint32_t (t_fm_pcd_qm_enqueue_callback) (t_handle h_qm_arg, void *p_fd);
+
+/*
+ * @Description   Host-Command parameters structure.
+ *
+ *		  When using Host command for PCD functionalities, a dedicated
+ *		  port must be used. If this routine is called for a PCD in a
+ *		  single partition environment, or it is the Master partition in
+ *		  a Multi-partition environment, The port will be initialized by
+ *		  the PCD driver initialization routine.
+ */
+typedef struct t_fm_pcd_hc_params {
+	uintptr_t		port_base_addr;
+	/**< Virtual Address of Host-Command Port memory mapped registers.*/
+	uint8_t			port_id;
+	/**< Port Id (0-6 relative to Host-Command/Offline-Parsing ports);
+	 * NOTE: When configuring Host Command port for FMANv3 devices
+	 * (DPAA_VERSION 11 and higher), port_id=0 MUST be used.
+	 */
+	uint16_t			liodn_base;
+	/**< LIODN base for this port, to be used together with LIODN offset
+	 * (irrelevant for P4080 revision 1.0)
+	 */
+	uint32_t			err_fqid;
+	/**< Host-Command Port error queue Id. */
+	uint32_t			conf_fqid;
+	/**< Host-Command Port confirmation queue Id. */
+	uint32_t			qm_channel;
+	/**< QM channel dedicated to this Host-Command port; will be used by the
+	 * FM for dequeue.
+	 */
+	t_fm_pcd_qm_enqueue_callback	*f_qm_enqueue;
+	/**< Callback routine for enqueuing a frame to the QM */
+	t_handle			h_qm_arg;
+	/**< Application's handle passed to QM module on enqueue */
+} t_fm_pcd_hc_params;
+
+/*
+ * @Description   The main structure for PCD initialization
+ */
+typedef struct t_fm_pcd_params {
+	bool			prs_support;
+	/**< TRUE if Parser will be used for any of the FM ports. */
+	bool			cc_support;
+	/**< TRUE if Coarse Classification will be used for any of the FM ports.
+	 */
+	bool			kg_support;
+	/**< TRUE if KeyGen will be used for any of the FM ports. */
+	bool			plcr_support;
+	/**< TRUE if Policer will be used for any of the FM ports. */
+	t_handle		h_fm;
+	/**< A handle to the FM module. */
+	uint8_t			num_schemes;
+	/**< Number of schemes dedicated to this partition.
+	 * this parameter is relevant if 'kg_support'=TRUE.
+	 */
+	bool			use_host_command;
+	/**< Optional for single partition, Mandatory for Multi partition */
+	t_fm_pcd_hc_params		hc;
+	/**< Host Command parameters, relevant only if 'use_host_command'=TRUE;
+	 * Relevant when FM not runs in "guest-mode".
+	 */
+	t_fm_pcd_exception_callback	*f_exception;
+	/**< Callback routine for general PCD exceptions; Relevant when FM not
+	 * runs in "guest-mode".
+	 */
+	t_fm_pcd_id_exception_callback	*f_exception_id;
+	/**< Callback routine for specific KeyGen scheme or Policer profile
+	 * exceptions; Relevant when FM not runs in "guest-mode".
+	 */
+	t_handle		h_app;
+	/**< A handle to an application layer object; This handle will be passed
+	 * by the driver upon calling the above callbacks; Relevant when FM not
+	 * runs in "guest-mode".
+	 */
+	uint8_t			part_plcr_profiles_base;
+	/**< The first policer-profile-id dedicated to this partition. this
+	 * parameter is relevant if 'plcr_support'=TRUE. NOTE: this parameter
+	 * relevant only when working with multiple partitions.
+	 */
+	uint16_t		part_num_of_plcr_profiles;
+	/**< Number of policer-profiles dedicated to this partition. This
+	 * parameter is relevant if 'plcr_support'=TRUE. NOTE: this parameter
+	 * relevant only when working with multiple partitions.
+	 */
+} t_fm_pcd_params;
+
+typedef struct t_fm_pcd_prs_label_params {
+	uint32_t instruction_offset;
+	ioc_net_header_type hdr;
+	uint8_t index_per_hdr;
+} t_fm_pcd_prs_label_params;
+
+typedef struct t_fm_pcd_prs_sw_params {
+	bool override;
+	uint32_t size;
+	uint16_t base;
+	uint8_t *p_code;
+	uint32_t sw_prs_data_params[FM_PCD_PRS_NUM_OF_HDRS];
+	uint8_t num_of_labels;
+	t_fm_pcd_prs_label_params labels_table[FM_PCD_PRS_NUM_OF_LABELS];
+} t_fm_pcd_prs_sw_params;
+
+/*
+ * @Function	  fm_pcd_config
+ *
+ * @Description   Basic configuration of the PCD module.
+ *		  Creates descriptor for the FM PCD module.
+ *
+ * @Param[in]	  p_fm_pcd_params	A structure of parameters for the
+					initialization of PCD.
+ *
+ * @Return	  A handle to the initialized module.
+ */
+t_handle fm_pcd_config(t_fm_pcd_params *p_fm_pcd_params);
+
+/*
+ * @Function	  fm_pcd_init
+ *
+ * @Description   Initialization of the PCD module.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ */
+uint32_t fm_pcd_init(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_free
+ *
+ * @Description   Frees all resources that were assigned to FM module.
+ *		  Calling this routine invalidates the descriptor.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ */
+uint32_t fm_pcd_free(t_handle h_fm_pcd);
+
+/*
+ * @Group	  FM_PCD_advanced_cfg_grp	FM PCD Advanced Configuration
+ *						Unit
+ *
+ * @Description   Frame Manager PCD Advanced Configuration API.
+ *
+ * @{
+ */
+
+/*
+ * @Function	  fm_pcd_config_exception
+ *
+ * @Description   Calling this routine changes the internal driver data base
+ *		  from its default selection of exceptions enabling.
+ *		  [DEFAULT_num_of_shared_plcr_profiles].
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  exception	The exception to be selected.
+ * @Param[in]	  enable	TRUE to enable interrupt, FALSE to mask it.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  This routine should NOT be called from guest-partition (i.e.
+ *		  guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_config_exception(t_handle h_fm_pcd,
+		ioc_fm_pcd_exceptions exception, bool enable);
+
+/*
+ * @Function	  fm_pcd_config_hc_frames_data_memory
+ *
+ * @Description   Configures memory-partition-id for FMan-Controller
+ *		  Host-Command frames. Calling this routine changes the internal
+ *		  driver data base from its default configuration [0].
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  mem_id	Memory partition ID.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  This routine may be called only if 'use_host_command' was TRUE
+ *		  when fm_pcd_config() routine was called.
+ */
+uint32_t fm_pcd_config_hc_frames_data_memory(t_handle h_fm_pcd, uint8_t mem_id);
+
+/*
+ * @Function	  fm_pcd_config_plcr_num_of_shared_profiles
+ *
+ * @Description   Calling this routine changes the internal driver data base
+ *		  from its default selection of exceptions enablement.
+ *		  [DEFAULT_num_of_shared_plcr_profiles].
+ *
+ * @Param[in]	  h_fm_pcd			FM PCD module descriptor.
+ * @Param[in]	  num_of_shared_plcr_profiles	Number of profiles to be shared
+ *						between ports on this partition
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ */
+uint32_t fm_pcd_config_plcr_num_of_shared_profiles(t_handle h_fm_pcd,
+		uint16_t num_of_shared_plcr_profiles);
+
+/*
+ * @Function	  fm_pcd_config_plcr_auto_refresh_mode
+ *
+ * @Description   Calling this routine changes the internal driver data base
+ *		  from its default selection of exceptions enablement. By
+ *		  default auto-refresh is [DEFAULT_plcrAutoRefresh].
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  enable	TRUE to enable, FALSE to disable
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  This routine should NOT be called from guest-partition
+ *		  (i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_config_plcr_auto_refresh_mode(t_handle h_fm_pcd, bool enable);
+
+/*
+ * @Function	  fm_pcd_config_prs_max_cycle_limit
+ *
+ * @Description   Calling this routine changes the internal data structure for
+ *		  the maximum parsing time from its default value
+ *		  [DEFAULT_MAX_PRS_CYC_LIM].
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  value		0 to disable the mechanism, or new maximum
+ *				parsing time.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  This routine should NOT be called from guest-partition
+ *		  (i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_config_prs_max_cycle_limit(t_handle h_fm_pcd, uint16_t value);
+
+/** @} */ /* end of FM_PCD_advanced_cfg_grp group */
+/** @} */ /* end of FM_PCD_init_grp group */
+
+/*
+ * @Group	  FM_PCD_Runtime_grp FM PCD Runtime Unit
+ *
+ * @Description   Frame Manager PCD Runtime Unit API
+ *
+ *		  The runtime control allows creation of PCD infrastructure
+ *		  modules such as Network Environment Characteristics,
+ *		  Classification Plan Groups and Coarse Classification Trees.
+ *		  It also allows on-the-fly initialization, modification and
+ *		  removal of PCD modules such as KeyGen schemes, coarse
+ *		  classification nodes and Policer profiles.
+ *
+ *		  In order to explain the programming model of the PCD driver
+ *		  interface a few terms should be explained, and will be used
+ *		  below.
+ *		  - Distinction Header - One of the 16 protocols supported by
+ *		    the FM parser, or one of the SHIM headers (1 or 2). May be a
+ *		    header with a special option (see below).
+ *		  - Interchangeable Headers Group - This is a group of Headers
+ *		    recognized by either one of them. For example, if in a
+ *		    specific context the user chooses to treat IPv4 and IPV6 in
+ *		    the same way, they may create an interchangeable Headers
+ *		    Unit consisting of these 2 headers.
+ *		  - A Distinction Unit - a Distinction Header or an
+ *		    Interchangeable Headers Group.
+ *		  - Header with special option - applies to Ethernet, MPLS,
+ *		    VLAN, IPv4 and IPv6, includes multicast, broadcast and other
+ *		    protocol specific options. In terms of hardware it relates
+ *		    to the options available in the classification plan.
+ *		  - Network Environment Characteristics - a set of Distinction
+ *		    Units that define the total recognizable header selection
+ *		    for a certain environment. This is NOT the list of all
+ *		    headers that will ever appear in a flow, but rather
+ *		    everything that needs distinction in a flow, where
+ *		    distinction is made by KeyGen schemes and coarse
+ *		    classification action descriptors.
+ *
+ *		  The PCD runtime modules initialization is done in stages. The
+ *		  first stage after initializing the PCD module itself is to
+ *		  establish a Network Flows Environment Definition. The
+ *		  application may choose to establish one or more such
+ *		  environments. Later, when needed, the application will have to
+ *		  state, for some of its modules, to which single environment it
+ *		  belongs.
+ *
+ * @{
+ */
+
+t_handle fm_pcd_open(t_fm_pcd_params *p_fm_pcd_params);
+void fm_pcd_close(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_enable
+ *
+ * @Description   This routine should be called after PCD is initialized for
+ *		  enabling all PCD engines according to their existing
+ *		  configuration.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() and when PCD is disabled.
+ */
+uint32_t fm_pcd_enable(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_disable
+ *
+ * @Description   This routine may be called when PCD is enabled in order to
+ *		  disable all PCD engines. It may be called only when none of
+ *		  the ports in the system are using the PCD.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() and when PCD is enabled.
+ */
+uint32_t fm_pcd_disable(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_get_counter
+ *
+ * @Description   Reads one of the FM PCD counters.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  counter	The requested counter.
+ *
+ * @Return	  Counter's current value.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  Note that it is user's responsibility to call this routine
+ *		  only for enabled counters, and there will be no indication if
+ *		  a disabled counter is accessed.
+ */
+uint32_t fm_pcd_get_counter(t_handle h_fm_pcd, ioc_fm_pcd_counters counter);
+
+/*
+ * @Function	fm_pcd_prs_load_sw
+ *
+ * @Description	This routine may be called in order to load software parsing
+ *		code.
+ *
+ * @Param[in]	h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	p_sw_prs	A pointer to a structure of software
+ *				parser parameters, including the software
+ *				parser image.
+ *
+ * @Return	E_OK on success; Error code otherwise.
+ *
+ * @Cautions	Allowed only following fm_pcd_init() and when PCD is disabled.
+ *		This routine should NOT be called from guest-partition
+ *		(i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_prs_load_sw(t_handle h_fm_pcd,
+		ioc_fm_pcd_prs_sw_params_t *p_sw_prs);
+
+/*
+ * @Function	  fm_pcd_set_advanced_offload_support
+ *
+ * @Description   This routine must be called in order to support the following
+ *		  features: IP-fragmentation, IP-reassembly, IPsec,
+ *		  Header-manipulation, frame-replicator.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() and when PCD is disabled.
+ *		  This routine should NOT be called from guest-partition
+ *		  (i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_set_advanced_offload_support(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_kg_set_dflt_value
+ *
+ * @Description   Calling this routine sets a global default value to be used
+ *		  by the KeyGen when parser does not recognize a required
+ *		  field/header.
+ *		  By default default values are 0.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  value_id	0,1 - one of 2 global default values.
+ * @Param[in]	  value		The requested default value.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() and when PCD is disabled.
+ *		  This routine should NOT be called from guest-partition
+ *		  (i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_kg_set_dflt_value(t_handle h_fm_pcd,
+		uint8_t value_id, uint32_t value);
+
+/*
+ * @Function	  fm_pcd_kg_set_additional_data_after_parsing
+ *
+ * @Description   Calling this routine allows the KeyGen to access data past
+ *		  the parser finishing point.
+ *
+ * @Param[in]	  h_fm_pcd		FM PCD module descriptor.
+ * @Param[in]	  payload_offset	the number of bytes beyond the parser
+ *					location.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() and when PCD is disabled.
+ *		  This routine should NOT be called from guest-partition (i.e.
+ *		  guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_kg_set_additional_data_after_parsing(t_handle h_fm_pcd,
+		uint8_t payload_offset);
+
+/*
+ * @Function	  fm_pcd_set_exception
+ *
+ * @Description   Calling this routine enables/disables PCD interrupts.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  exception	The exception to be selected.
+ * @Param[in]	  enable	TRUE to enable interrupt, FALSE to mask it.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  This routine should NOT be called from guest-partition
+ *		  (i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_set_exception(t_handle h_fm_pcd,
+		ioc_fm_pcd_exceptions exception, bool enable);
+
+/*
+ * @Function	  fm_pcd_modify_counter
+ *
+ * @Description   Sets a value to an enabled counter. Use "0" to reset the
+ *		  counter.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  counter	The requested counter.
+ * @Param[in]	  value		The requested value to be written into the
+ *				counter.
+ *
+ * @Return	E_OK on success; Error code otherwise.
+ *
+ * @Cautions	Allowed only following fm_pcd_init().
+ *		This routine should NOT be called from guest-partition
+ *		(i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_modify_counter(t_handle h_fm_pcd,
+		ioc_fm_pcd_counters counter, uint32_t value);
+
+/*
+ * @Function	  fm_pcd_set_plcr_statistics
+ *
+ * @Description   This routine may be used to enable/disable policer statistics
+ *		  counter. By default the statistics is enabled.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor
+ * @Param[in]	  enable	TRUE to enable, FALSE to disable.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  This routine should NOT be called from guest-partition
+ *		  (i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_pcd_set_plcr_statistics(t_handle h_fm_pcd, bool enable);
+
+/*
+ * @Function	  fm_pcd_set_prs_statistics
+ *
+ * @Description   Defines whether to gather parser statistics including all
+ *		  ports.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  enable	TRUE to enable, FALSE to disable.
+ *
+ * @Return	  None
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  This routine should NOT be called from guest-partition
+ *		  (i.e. guestId != NCSW_PRIMARY_ID)
+ */
+void fm_pcd_set_prs_statistics(t_handle h_fm_pcd, bool enable);
+
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+/*
+ * @Function	  fm_pcd_dump_regs
+ *
+ * @Description   Dumps all PCD registers
+ *
+ * @Param[in]	  h_fm_pcd	A handle to an FM PCD Module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  NOTE: this routine may be called only for FM in master mode
+ *		  (i.e. 'guestId'=NCSW_PRIMARY_ID) or in a case that the
+ *		  registers are mapped.
+ */
+uint32_t fm_pcd_dump_regs(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_kg_dump_regs
+ *
+ * @Description   Dumps all PCD KG registers
+ *
+ * @Param[in]	  h_fm_pcd	A handle to an FM PCD Module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  NOTE: this routine may be called only for FM in master mode
+ *		  (i.e. 'guestId'=NCSW_PRIMARY_ID) or in a case that the
+ *		  registers are mapped.
+ */
+uint32_t fm_pcd_kg_dump_regs(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_plcr_dump_regs
+ *
+ * @Description   Dumps all PCD Policer registers
+ *
+ * @Param[in]	  h_fm_pcd	A handle to an FM PCD Module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  NOTE: this routine may be called only for FM in master mode
+ *		  (i.e. 'guestId'=NCSW_PRIMARY_ID) or in a case that the
+ *		  registers are mapped.
+ */
+uint32_t fm_pcd_plcr_dump_regs(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_plcr_profile_dump_regs
+ *
+ * @Description   Dumps all PCD Policer profile registers
+ *
+ * @Param[in]	  h_profile	A handle to a Policer profile.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  NOTE: this routine may be called only for FM in master mode
+ *		  (i.e. 'guestId'=NCSW_PRIMARY_ID) or in a case that the
+ *		  registers are mapped.
+ */
+uint32_t fm_pcd_plcr_profile_dump_regs(t_handle h_profile);
+
+/*
+ * @Function	  fm_pcd_prs_dump_regs
+ *
+ * @Description   Dumps all PCD Parser registers
+ *
+ * @Param[in]	  h_fm_pcd	A handle to an FM PCD Module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  NOTE: this routine may be called only for FM in master mode
+ *		  (i.e. 'guestId'=NCSW_PRIMARY_ID) or in a case that the
+ *		  registers are mapped.
+ */
+uint32_t fm_pcd_prs_dump_regs(t_handle h_fm_pcd);
+
+/*
+ * @Function	  fm_pcd_hc_dump_regs
+ *
+ * @Description   Dumps HC Port registers
+ *
+ * @Param[in]	  h_fm_pcd	A handle to an FM PCD Module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ *		  NOTE: this routine may be called only for FM in master mode
+ *		  (i.e. 'guestId'=NCSW_PRIMARY_ID).
+ */
+uint32_t	fm_pcd_hc_dump_regs(t_handle h_fm_pcd);
+#endif /* (defined(DEBUG_ERRORS) && ... */
+
+
+/*
+ * KeyGen	  FM_PCD_Runtime_build_grp FM PCD Runtime Building Unit
+ *
+ * @Description   Frame Manager PCD Runtime Building API
+ *
+ *		  This group contains routines for setting, deleting and
+ *		  modifying PCD resources, for defining the total PCD tree.
+ * @{
+ */
+
+/*
+ * @Collection	  Definitions of coarse classification
+ *		  parameters as required by KeyGen (when coarse classification
+ *		  is the next engine after this scheme).
+ */
+#define FM_PCD_MAX_NUM_OF_CC_TREES		8
+#define FM_PCD_MAX_NUM_OF_CC_GROUPS		16
+#define FM_PCD_MAX_NUM_OF_CC_UNITS		4
+#define FM_PCD_MAX_NUM_OF_KEYS		256
+#define FM_PCD_MAX_NUM_OF_FLOWS		(4 * KILOBYTE)
+#define FM_PCD_MAX_SIZE_OF_KEY		56
+#define FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP	16
+#define FM_PCD_LAST_KEY_INDEX		0xffff
+
+#define FM_PCD_MAX_NUM_OF_CC_NODES	255
+			/* Obsolete, not used - will be removed in the future */
+/* @} */
+
+/*
+ * @Collection	  A set of definitions to allow protocol
+ *		  special option description.
+ */
+typedef uint32_t	protocol_opt_t;
+			/**< A general type to define a protocol option. */
+
+typedef protocol_opt_t   eth_protocol_opt_t;
+			/**< Ethernet protocol options. */
+#define ETH_BROADCAST		0x80000000  /**< Ethernet Broadcast. */
+#define ETH_MULTICAST		0x40000000  /**< Ethernet Multicast. */
+
+typedef protocol_opt_t   vlan_protocol_opt_t;	/**< VLAN protocol options. */
+#define VLAN_STACKED		0x20000000  /**< Stacked VLAN. */
+
+typedef protocol_opt_t   mpls_protocol_opt_t;	/**< MPLS protocol options. */
+#define MPLS_STACKED		0x10000000  /**< Stacked MPLS. */
+
+typedef protocol_opt_t   ipv_4protocol_opt_t;	/**< IPv4 protocol options. */
+#define IPV4_BROADCAST_1		0x08000000  /**< IPv4 Broadcast. */
+#define IPV4_MULTICAST_1		0x04000000  /**< IPv4 Multicast. */
+#define IPV4_UNICAST_2		0x02000000  /**< Tunneled IPv4 - Unicast. */
+#define IPV4_MULTICAST_BROADCAST_2  0x01000000
+				/**< Tunneled IPv4 - Broadcast/Multicast. */
+
+#define IPV4_FRAG_1		0x00000008
+				/**< IPV4 reassembly option. IPV4 Reassembly
+				 * manipulation requires network environment
+				 * with IPV4 header and IPV4_FRAG_1 option
+				 */
+
+typedef protocol_opt_t   ipv_6protocol_opt_t;	/**< IPv6 protocol options. */
+#define IPV6_MULTICAST_1	0x00800000  /**< IPv6 Multicast. */
+#define IPV6_UNICAST_2		0x00400000  /**< Tunneled IPv6 - Unicast. */
+#define IPV6_MULTICAST_2	0x00200000  /**< Tunneled IPv6 - Multicast. */
+
+#define IPV6_FRAG_1		0x00000004
+				/**< IPV6 reassembly option. IPV6 Reassembly
+				 * manipulation requires network environment
+				 * with IPV6 header and IPV6_FRAG_1 option; in
+				 * case where fragment found, the
+				 * fragment-extension offset may be found at
+				 * 'shim2' (in parser-result).
+				 */
+typedef protocol_opt_t   capwap_protocol_opt_t;	/**< CAPWAP protocol options. */
+#define CAPWAP_FRAG_1		0x00000008
+				/**< CAPWAP reassembly option. CAPWAP Reassembly
+				 * manipulation requires network environment
+				 * with CAPWAP header and CAPWAP_FRAG_1 option;
+				 * in case where fragment found, the
+				 * fragment-extension offset may be found at
+				 * 'shim2' (in parser-result).
+				 */
+
+/* @} */
+
+#define FM_PCD_MANIP_MAX_HDR_SIZE	256
+#define FM_PCD_MANIP_DSCP_TO_VLAN_TRANS	64
+
+/*
+ * @Collection	  A set of definitions to support Header Manipulation selection.
+ */
+typedef uint32_t		hdr_manip_flags_t;
+		/**< A general type to define a HMan update command flags. */
+
+typedef hdr_manip_flags_t	ipv_4hdr_manip_update_flags_t;
+		/**< IPv4 protocol HMan update command flags. */
+
+#define HDR_MANIP_IPV4_TOS	0x80000000
+			/**< update TOS with the given value ('tos' field
+			 * of t_FmPcdManipHdrFieldUpdateIpv4)
+			 */
+#define HDR_MANIP_IPV4_ID	0x40000000
+			/**< update IP ID with the given value ('id' field
+			 * of t_FmPcdManipHdrFieldUpdateIpv4)
+			 */
+#define HDR_MANIP_IPV4_TTL	0x20000000
+			/**< Decrement TTL by 1 */
+#define HDR_MANIP_IPV4_SRC	0x10000000
+			/**< update IP source address with the given value
+			 * ('src' field of t_FmPcdManipHdrFieldUpdateIpv4)
+			 */
+#define HDR_MANIP_IPV4_DST	0x08000000
+			/**< update IP destination address with the given value
+			 * ('dst' field of t_FmPcdManipHdrFieldUpdateIpv4)
+			 */
+
+typedef hdr_manip_flags_t	ipv_6hdr_manip_update_flags_t;
+			/**< IPv6 protocol HMan update command flags. */
+
+#define HDR_MANIP_IPV6_TC	0x80000000
+			/**< update Traffic Class address with the given value
+			 * ('trafficClass' field of
+			 * t_FmPcdManipHdrFieldUpdateIpv6)
+			 */
+#define HDR_MANIP_IPV6_HL	0x40000000
+			/**< Decrement Hop Limit by 1 */
+#define HDR_MANIP_IPV6_SRC	0x20000000
+			/**< update IP source address with the given value
+			 * ('src' field of t_FmPcdManipHdrFieldUpdateIpv6)
+			 */
+#define HDR_MANIP_IPV6_DST	0x10000000
+			/**< update IP destination address with the given value
+			 * ('dst' field of t_FmPcdManipHdrFieldUpdateIpv6)
+			 */
+
+typedef hdr_manip_flags_t	tcp_udp_hdr_manip_update_flags_t;
+		/**< TCP/UDP protocol HMan update command flags. */
+
+#define HDR_MANIP_TCP_UDP_SRC	0x80000000
+		/**< update TCP/UDP source address with the given value
+		 * ('src' field of t_FmPcdManipHdrFieldUpdateTcpUdp)
+		 */
+#define HDR_MANIP_TCP_UDP_DST	0x40000000
+		/**< update TCP/UDP destination address with the given value
+		 * ('dst' field of t_FmPcdManipHdrFieldUpdateTcpUdp)
+		 */
+#define HDR_MANIP_TCP_UDP_CHECKSUM  0x20000000
+		/**< update TCP/UDP checksum */
+
+/* @} */
+
+/*
+ * @Description   A type used for returning the order of the key extraction.
+ *		  each value in this array represents the index of the
+ *		  extraction command as defined by the user in the
+ *		  initialization extraction array. The valid size of this array
+ *		  is the user define number of extractions required (also marked
+ *		  by the second '0' in this array).
+ */
+typedef	uint8_t	t_fm_pcd_kg_key_order[FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY];
+
+/*
+ * @Collection	  Definitions for CC statistics
+ */
+#define FM_PCD_CC_STATS_MAX_NUM_OF_FLR	10
+	/* Maximal supported number of frame length ranges */
+#define FM_PCD_CC_STATS_FLR_SIZE	2
+	/* Size in bytes of a frame length range limit */
+#define FM_PCD_CC_STATS_COUNTER_SIZE	4
+	/* Size in bytes of a frame length range counter */
+/* @} */
+
+/*
+ * @Description   Parameters for defining CC keys parameters
+ *		  The driver supports two methods for CC node allocation:
+ *		  dynamic and static. Static mode was created in order to
+ *		  prevent runtime alloc/free of FMan memory (MURAM), which may
+ *		  cause fragmentation; in this mode, the driver automatically
+ *		  allocates the memory according to 'max_num_of_keys' parameter.
+ *		  The driver calculates the maximal memory size that may be used
+ *		  for this CC-Node taking into consideration 'mask_support' and
+ *		  'statistics_mode' parameters. When 'action' =
+ *		  e_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction parameters of
+ *		  this node, 'max_num_of_keys' must be equal to 'num_of_keys'.
+ *		  In dynamic mode, 'max_num_of_keys' must be zero. At
+ *		  initialization, all required structures are allocated
+ *		  according to 'num_of_keys' parameter. During runtime
+ *		  modification, these structures are re-allocated according to
+ *		  the updated number of keys.
+ *
+ *		  Please note that 'action' and 'icIndxMask' mentioned in the
+ *		  specific parameter explanations are passed in the extraction
+ *		  parameters of the node (fields of
+ *		  extractCcParams.extractNonHdr).
+ */
+typedef struct t_keys_params {
+	uint16_t	max_num_of_keys;
+		/**< Maximum number of keys that will (ever) be used in this
+		 * CC-Node; A value of zero may be used for dynamic memory
+		 * allocation.
+		 */
+	bool		mask_support;
+		/**< This parameter is relevant only if a node is initialized
+		 * with 'action' = e_FM_PCD_ACTION_EXACT_MATCH and
+		 * max_num_of_keys > 0; Should be TRUE to reserve table memory
+		 * for key masks, even if initial keys do not contain masks, or
+		 * if the node was initialized as 'empty' (without keys); this
+		 * will allow user to add keys with masks at runtime.
+		 * NOTE that if user want to use only global-masks (i.e. one
+		 * common mask for all the entries within this table, this
+		 * parameter should set to 'FALSE'.
+		 */
+	ioc_fm_pcd_cc_stats_mode	statistics_mode;
+		/**< Determines the supported statistics mode for all node's
+		 * keys. To enable statistics gathering, statistics should be
+		 * enabled per every key, using 'statisticsEn' in next engine
+		 * parameters structure of that key; If 'max_num_of_keys' is
+		 * set, all required structures will be preallocated for all
+		 * keys.
+		 */
+	uint16_t	frame_length_ranges[FM_PCD_CC_STATS_MAX_NUM_OF_FLR];
+		/**< Relevant only for 'RMON' statistics mode (this feature is
+		 * supported only on B4860 device); Holds a list of programmable
+		 * thresholds - for each received frame, its length in bytes is
+		 * examined against these range thresholds and the appropriate
+		 * counter is incremented by 1 - for example, to belong to range
+		 * i, the following should hold: range i-1 threshold < frame
+		 * length <= range i threshold. Each range threshold must be
+		 * larger then its preceding range threshold, and last range
+		 * threshold must be 0xFFFF.
+		 */
+	uint16_t	num_of_keys;
+		/**< Number of initial keys; Note that in case of 'action' =
+		 * e_FM_PCD_ACTION_INDEXED_LOOKUP, this field should be
+		 * power-of-2 of the number of bits that are set in 'icIndxMask'
+		 */
+	uint8_t		key_size;
+		/**< Size of key - for extraction of type FULL_FIELD, 'key_size'
+		 * has to be the standard size of the selected key; For other
+		 * extraction types, 'key_size' has to be as size of extraction;
+		 * When 'action' = e_FM_PCD_ACTION_INDEXED_LOOKUP, 'key_size'
+		 * must be 2.
+		 */
+	ioc_fm_pcd_cc_key_params_t	key_params[FM_PCD_MAX_NUM_OF_KEYS];
+		/**< An array with 'num_of_keys' entries, each entry specifies
+		 * the corresponding key parameters; When 'action' =
+		 * e_FM_PCD_ACTION_EXACT_MATCH, this value must not exceed 255
+		 * (FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved for the
+		 * 'miss' entry.
+		 */
+	ioc_fm_pcd_cc_next_engine_params_t   cc_next_engine_params_for_miss;
+		/**< Parameters for defining the next engine when a key is not
+		 * matched; Not relevant if action =
+		 * e_FM_PCD_ACTION_INDEXED_LOOKUP.
+		 */
+} t_keys_params;
+
+/*
+ * @Description   Parameters for defining custom header manipulation for generic
+ *		  field replacement
+ */
+typedef struct ioc_fm_pcd_manip_hdr_custom_gen_field_replace {
+	uint8_t		src_offset;
+			/**< Location of new data - Offset from Parse Result
+			 * (>= 16, src_offset+size <= 32, )
+			 */
+	uint8_t		dst_offset;
+			/**< Location of data to be overwritten - Offset from
+			 * start of frame (dst_offset + size <= 256).
+			 */
+	uint8_t		size;
+			/**< The number of bytes (<=16) to be replaced */
+	uint8_t		mask;
+			/**< Optional 1 byte mask. Set to select bits for
+			 * replacement (1 - bit will be replaced); Clear to use
+			 * field as is.
+			 */
+	uint8_t		mask_offset;
+			/**< Relevant if mask != 0; Mask offset within the
+			 * replaces "size"
+			 */
+} ioc_fm_pcd_manip_hdr_custom_gen_field_replace;
+
+/*
+ * @Function	  fm_pcd_net_env_characteristics_set
+ *
+ * @Description   Define a set of Network Environment Characteristics.
+ *
+ *		  When setting an environment it is important to understand its
+ *		  application. It is not meant to describe the flows that will
+ *		  run on the ports using this environment, but what the user
+ *		  means TO DO with the PCD mechanisms in order to
+ *		  parse-classify-distribute those frames.
+ *		  By specifying a distinction unit, the user means it would use
+ *		  that option for distinction between frames at either a KeyGen
+ *		  scheme or a coarse classification action descriptor. Using
+ *		  interchangeable headers to define a unit means that the user
+ *		  is indifferent to which of the interchangeable headers is
+ *		  present in the frame, and wants the distinction to be based on
+ *		  the presence of either one of them.
+ *
+ *		  Depending on context, there are limitations to the use of
+ *		  environments. A port using the PCD functionality is bound to
+ *		  an environment. Some or even all ports may share an
+ *		  environment but also an environment per port is possible. When
+ *		  initializing a scheme, a classification plan group (see
+ *		  below), or a coarse classification tree, one of the
+ *		  initialized environments must be stated and related to. When a
+ *		  port is bound to a scheme, a classification plan group, or a
+ *		  coarse classification tree, it MUST be bound to the same
+ *		  environment.
+ *
+ *		  The different PCD modules, may relate (for flows definition)
+ *		  ONLY on distinction units as defined by their environment.
+ *		  When initializing a scheme for example, it may not choose to
+ *		  select IPV4 as a match for recognizing flows unless it was
+ *		  defined in the relating environment. In fact, to guide the
+ *		  user through the configuration of the PCD, each module's
+ *		  characterization in terms of flows is not done using protocol
+ *		  names, but using environment indexes.
+ *
+ *		  In terms of HW implementation, the list of distinction units
+ *		  sets the LCV vectors and later used for match vector,
+ *		  classification plan vectors and coarse classification
+ *		  indexing.
+ *
+ * @Param[in]	  h_fm_pcd		FM PCD module descriptor.
+ * @Param[in]	  p_netenv_params	A structure of parameters for the
+ *					initialization of the network
+ *					environment.
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_net_env_characteristics_set(t_handle h_fm_pcd,
+				 ioc_fm_pcd_net_env_params_t *p_netenv_params);
+
+/*
+ * @Function	  fm_pcd_net_env_characteristics_delete
+ *
+ * @Description   Deletes a set of Network Environment Characteristics.
+ *
+ * @Param[in]	  h_net_env	A handle to the Network environment.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ */
+uint32_t fm_pcd_net_env_characteristics_delete(t_handle h_net_env);
+
+/*
+ * @Function	  fm_pcd_kg_scheme_set
+ *
+ * @Description   Initializing or modifying and enabling a scheme for the
+ *		  KeyGen. This routine should be called for adding or modifying
+ *		  a scheme. When a scheme needs modifying, the API requires that
+ *		  it will be rewritten. In such a case 'modify' should be TRUE.
+ *		  If the routine is called for a valid scheme and 'modify' is
+ *		  FALSE, it will return error.
+ *
+ * @Param[in]	  h_fm_pcd		If this is a new scheme - A handle to an
+ *					FM PCD Module. Otherwise NULL (ignored
+ *					by driver).
+ * @Param[in,out] p_scheme_params	A structure of parameters for defining
+ *					the scheme
+ *
+ * @Return	  A handle to the initialized scheme on success; NULL code
+ *		  otherwise. When used as "modify" (rather than for setting a
+ *		  new scheme), p_scheme_params->id.h_scheme will return NULL if
+ *		  action fails due to scheme BUSY state.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_kg_scheme_set(t_handle h_fm_pcd,
+			    ioc_fm_pcd_kg_scheme_params_t *p_scheme_params);
+
+/*
+ * @Function	  fm_pcd_kg_scheme_delete
+ *
+ * @Description   Deleting an initialized scheme.
+ *
+ * @Param[in]	  h_scheme	scheme handle as returned by
+ *				fm_pcd_kg_scheme_set()
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() & fm_pcd_kg_scheme_set().
+ */
+uint32_t	fm_pcd_kg_scheme_delete(t_handle h_scheme);
+
+/*
+ * @Function	  fm_pcd_kg_scheme_get_counter
+ *
+ * @Description   Reads scheme packet counter.
+ *
+ * @Param[in]	  h_scheme	scheme handle as returned by
+ *				fm_pcd_kg_scheme_set().
+ *
+ * @Return	  Counter's current value.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() & fm_pcd_kg_scheme_set().
+ */
+uint32_t  fm_pcd_kg_scheme_get_counter(t_handle h_scheme);
+
+/*
+ * @Function	  fm_pcd_kg_scheme_set_counter
+ *
+ * @Description   Writes scheme packet counter.
+ *
+ * @Param[in]	  h_scheme	scheme handle as returned by
+ *				fm_pcd_kg_scheme_set().
+ * @Param[in]	  value		New scheme counter value - typically '0' for
+ *				resetting the counter.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init() & fm_pcd_kg_scheme_set().
+ */
+uint32_t  fm_pcd_kg_scheme_set_counter(t_handle h_scheme,
+			uint32_t value);
+
+/*
+ * @Function	  fm_pcd_plcr_profile_set
+ *
+ * @Description   Sets a profile entry in the policer profile table.
+ *		  The routine overrides any existing value.
+ *
+ * @Param[in]	  h_fm_pcd	A handle to an FM PCD Module.
+ * @Param[in]	  p_profile	A structure of parameters for defining a
+ *				policer profile entry.
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise. When used as "modify" (rather than for setting a
+ *		  new profile), p_profile->id.h_profile will return NULL if
+ *		  action fails due to profile BUSY state.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_plcr_profile_set(t_handle h_fm_pcd,
+			       ioc_fm_pcd_plcr_profile_params_t  *p_profile);
+
+/*
+ * @Function	  fm_pcd_plcr_profile_delete
+ *
+ * @Description   Delete a profile entry in the policer profile table.
+ *		  The routine set entry to invalid.
+ *
+ * @Param[in]	  h_profile	A handle to the profile.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_plcr_profile_delete(t_handle h_profile);
+
+/*
+ * @Function	  fm_pcd_plcr_profile_get_counter
+ *
+ * @Description   Sets an entry in the classification plan.
+ *		  The routine overrides any existing value.
+ *
+ * @Param[in]	  h_profile	A handle to the profile.
+ * @Param[in]	  counter	Counter selector.
+ *
+ * @Return	  specific counter value.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_plcr_profile_get_counter(t_handle	h_profile,
+			ioc_fm_pcd_plcr_profile_counters	counter);
+
+/*
+ * @Function	  fm_pcd_plcr_profile_set_counter
+ *
+ * @Description   Sets an entry in the classification plan.
+ *		  The routine overrides any existing value.
+ *
+ * @Param[in]	  h_profile	A handle to the profile.
+ * @Param[in]	  counter	Counter selector.
+ * @Param[in]	  value		value to set counter with.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_plcr_profile_set_counter(t_handle h_profile,
+				      ioc_fm_pcd_plcr_profile_counters counter,
+					uint32_t		value);
+
+/*
+ * @Function	  fm_pcd_cc_root_build
+ *
+ * @Description   This routine must be called to define a complete coarse
+ *		  classification tree. This is the way to define coarse
+ *		  classification to a certain flow - the KeyGen schemes may
+ *		  point only to trees defined in this way.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  p_params	A structure of parameters to define the tree.
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_cc_root_build(t_handle h_fm_pcd,
+			     ioc_fm_pcd_cc_tree_params_t  *p_params);
+
+/*
+ * @Function	  fm_pcd_cc_root_delete
+ *
+ * @Description   Deleting an built tree.
+ *
+ * @Param[in]	  h_cc_tree	A handle to a CC tree.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_cc_root_delete(t_handle h_cc_tree);
+
+/*
+ * @Function	  fm_pcd_cc_root_modify_next_engine
+ *
+ * @Description   Modify the Next Engine Parameters in the entry of the tree.
+ *
+ * @Param[in]	  h_cc_tree			A handle to the tree
+ * @Param[in]	  grp_id			A Group index in the tree
+ * @Param[in]	  index				Entry index in the group
+ *						defined by grp_id
+ * @Param[in]	  p_fm_pcd_cc_next_engine	Pointer to new next
+ *						engine parameters
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following FM_PCD_CcBuildTree().
+ */
+uint32_t fm_pcd_cc_root_modify_next_engine(t_handle h_cc_tree,
+		uint8_t		grp_id,
+		uint8_t		index,
+		ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function	  fm_pcd_match_table_set
+ *
+ * @Description   This routine should be called for each CC (coarse
+ *		  classification) node. The whole CC tree should be built bottom
+ *		  up so that each node points to already defined nodes.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  p_param	A structure of parameters defining the CC node
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+t_handle   fm_pcd_match_table_set(t_handle h_fm_pcd,
+		ioc_fm_pcd_cc_node_params_t *p_param);
+
+/*
+ * @Function	  fm_pcd_match_table_delete
+ *
+ * @Description   Deleting an built node.
+ *
+ * @Param[in]	  h_cc_node	A handle to a CC node.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_match_table_delete(t_handle h_cc_node);
+
+/*
+ * @Function	  fm_pcd_match_table_modify_miss_next_engine
+ *
+ * @Description   Modify the Next Engine Parameters of the Miss key case of the
+ *		  node.
+ *
+ * @Param[in]	  h_cc_node				A handle to the node
+ * @Param[in]	  p_fm_pcd_cc_next_engine_params	Parameters for defining
+ *							next engine
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set(); Not
+ *		  relevant in the case the node is of type 'INDEXED_LOOKUP'.
+ *		  When configuring nextEngine = e_FM_PCD_CC, note that
+ *		  p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ *		  different from the currently changed table.
+ *
+ */
+uint32_t fm_pcd_match_table_modify_miss_next_engine(t_handle h_cc_node,
+	ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine_params);
+
+/*
+ * @Function	  fm_pcd_match_table_remove_key
+ *
+ * @Description   Remove the key (including next engine parameters of this key)
+ *		  defined by the index of the relevant node.
+ *
+ * @Param[in]	  h_cc_node	A handle to the node
+ * @Param[in]	  key_index	Key index for removing
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set() was called for
+ *		  this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_remove_key(t_handle h_cc_node,
+			uint16_t key_index);
+
+/*
+ * @Function	  fm_pcd_match_table_add_key
+ *
+ * @Description   Add the key (including next engine parameters of this key in
+ *		  the index defined by the key_index. Note that
+ *		  'FM_PCD_LAST_KEY_INDEX' may be used by user that don't care
+ *		  about the position of the key in the table - in that case, the
+ *		  key will be automatically added by the driver in the last
+ *		  available entry.
+ *
+ * @Param[in]	  h_cc_node	A handle to the node
+ * @Param[in]	  key_index	Key index for adding.
+ * @Param[in]	  key_size	Key size of added key
+ * @Param[in]	  p_key_params	A pointer to the parameters includes new key
+ *				with Next Engine Parameters
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set() was called for
+ *		  this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_add_key(t_handle h_cc_node,
+				uint16_t		key_index,
+				uint8_t		key_size,
+				ioc_fm_pcd_cc_key_params_t  *p_key_params);
+
+/*
+ * @Function	  fm_pcd_match_table_modify_next_engine
+ *
+ * @Description   Modify the Next Engine Parameters in the relevant key entry of
+ *		  the node.
+ *
+ * @Param[in]	  h_cc_node			A handle to the node
+ * @Param[in]	  key_index			Key index for Next
+ *						Engine modifications
+ * @Param[in]	  p_fm_pcd_cc_next_engine	Parameters for defining
+ *						next engine
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set(). When
+ *		  configuring nextEngine = e_FM_PCD_CC, note that
+ *		  p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ *		  different from the currently changed table.
+ *
+ */
+uint32_t fm_pcd_match_table_modify_next_engine(t_handle h_cc_node,
+		uint16_t		key_index,
+		ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function	  fm_pcd_match_table_modify_key_and_next_engine
+ *
+ * @Description   Modify the key and Next Engine Parameters of this key in the
+ *		  index defined by the key_index.
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[in]	  key_index		Key index for adding
+ * @Param[in]	  key_size		Key size of added key
+ * @Param[in]	  p_key_params		A pointer to the parameters includes
+ *					modified key and modified Next Engine
+ *					Params
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	Allowed only following fm_pcd_match_table_set() was called for
+ *		this node and the nodes that lead to it. When configuring
+ *		nextEngine = e_FM_PCD_CC, note that
+ *		p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ *		different from the currently changed table.
+ */
+uint32_t fm_pcd_match_table_modify_key_and_next_engine(t_handle h_cc_node,
+				uint16_t		key_index,
+				uint8_t		key_size,
+				ioc_fm_pcd_cc_key_params_t  *p_key_params);
+
+/*
+ * @Function	  fm_pcd_match_table_modify_key
+ *
+ * @Description   Modify the key in the index defined by the key_index.
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[in]	  key_index		Key index for adding
+ * @Param[in]	  key_size		Key size of added key
+ * @Param[in]	  p_key			A pointer to the new key
+ * @Param[in]	  p_mask		A pointer to the new mask if relevant,
+ *					otherwise pointer to NULL
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set() was called for
+ *		  this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_modify_key(t_handle h_cc_node,
+				uint16_t key_index,
+				uint8_t  key_size,
+				uint8_t  *p_key,
+				uint8_t  *p_mask);
+
+/*
+ * @Function	  fm_pcd_match_table_find_nremove_key
+ *
+ * @Description   Remove the key (including next engine parameters of this key)
+ *		  defined by the key and mask. Note that this routine will
+ *		  search the node to locate the index of the required key
+ *		  (& mask) to remove.
+ *
+ * @Param[in]	  h_cc_node	A handle to the node
+ * @Param[in]	  key_size	Key size of the one to remove.
+ * @Param[in]	  p_key		A pointer to the requested key to remove.
+ * @Param[in]	  p_mask	A pointer to the mask if relevant,
+ *				otherwise pointer to NULL
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set() was called for
+ *		  this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_find_nremove_key(t_handle h_cc_node,
+					uint8_t  key_size,
+					uint8_t  *p_key,
+					uint8_t  *p_mask);
+
+/*
+ * @Function	  fm_pcd_match_table_find_nmodify_next_engine
+ *
+ * @Description   Modify the Next Engine Parameters in the relevant key entry of
+ *		  the node. Note that this routine will search the node to
+ *		  locate the index of the required key (& mask) to modify.
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[in]	  key_size		Key size of the one to modify.
+ * @Param[in]	  p_key			A pointer to the requested key to modify
+ * @Param[in]	  p_mask		A pointer to the mask if relevant,
+ *					otherwise pointer to NULL
+ * @Param[in]	  p_fm_pcd_cc_next_engine	Parameters for defining
+ *							next engine
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set(). When
+ *		  configuring nextEngine = e_FM_PCD_CC, note that
+ *		  p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ *		  different from the currently changed table.
+ */
+uint32_t fm_pcd_match_table_find_nmodify_next_engine(t_handle h_cc_node,
+		uint8_t		key_size,
+		uint8_t		*p_key,
+		uint8_t		*p_mask,
+		ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function	 fm_pcd_match_table_find_nmodify_key_and_next_engine
+ *
+ * @Description   Modify the key and Next Engine Parameters of this key in the
+ *		  index defined by the key_index. Note that this routine will
+ *		  search the node to locate the index of the required key
+ *		  (& mask) to modify.
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[in]	  key_size		Key size of the one to modify.
+ * @Param[in]	  p_key			A pointer to the requested key to modify
+ * @Param[in]	  p_mask		A pointer to the mask if relevant,
+ *					otherwise pointer to NULL
+ * @Param[in]	  p_key_params		A pointer to the parameters includes
+ *					modified key and modified Next Engine
+ *					Params
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set() was called for
+ *		  this node and the nodes that lead to it.
+ *		  When configuring nextEngine = e_FM_PCD_CC, note that
+ *		  p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ *		  different from the currently changed table.
+ */
+uint32_t fm_pcd_match_table_find_nmodify_key_and_next_engine(t_handle h_cc_node,
+				uint8_t key_size,
+				uint8_t *p_key,
+				uint8_t *p_mask,
+				ioc_fm_pcd_cc_key_params_t *p_key_params);
+
+/*
+ * @Function	  fm_pcd_match_table_find_nmodify_key
+ *
+ * @Description   Modify the key  in the index defined by the key_index. Note
+ *		  that this routine will search the node to locate the index of
+ *		  the required key (& mask) to modify.
+ *
+ * @Param[in]	  h_cc_node	A handle to the node
+ * @Param[in]	  key_size	Key size of the one to modify.
+ * @Param[in]	  p_key		A pointer to the requested key to modify.
+ * @Param[in]	  p_mask	A pointer to the mask if relevant,
+ *				otherwise pointer to NULL
+ * @Param[in]	  p_new_key	A pointer to the new key
+ * @Param[in]	  p_new_mask	A pointer to the new mask if relevant,
+ *				otherwise pointer to NULL
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set() was called for
+ *		  this node and the nodes that lead to it.
+ */
+uint32_t fm_pcd_match_table_find_nmodify_key(t_handle h_cc_node,
+					uint8_t  key_size,
+					uint8_t  *p_key,
+					uint8_t  *p_mask,
+					uint8_t  *p_new_key,
+					uint8_t  *p_new_mask);
+
+/*
+ * @Function	  fm_pcd_match_table_get_key_counter
+ *
+ * @Description   This routine may be used to get a counter of specific key in a
+ *		  CC Node; This counter reflects how many frames passed that
+ *		  were matched this key.
+ *
+ * @Param[in]	  h_cc_node	A handle to the node
+ * @Param[in]	  key_index	Key index for adding
+ *
+ * @Return	  The specific key counter.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set().
+ */
+uint32_t fm_pcd_match_table_get_key_counter(t_handle h_cc_node,
+				uint16_t key_index);
+
+/*
+ * @Function	  fm_pcd_match_table_get_key_statistics
+ *
+ * @Description   This routine may be used to get statistics counters of
+ *		  specific key in a CC Node.
+ *
+ *		  If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ *		  'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ *		  node, these counters reflect how many frames passed that were
+ *		  matched this key; The total frames count will be returned in
+ *		  the counter of the first range (as only one frame length range
+ *		  was defined). If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for
+ *		  this node, the total frame count will be separated to frame
+ *		  length counters, based on provided frame length ranges.
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[in]	  key_index		Key index for adding
+ * @Param[out]	  p_key_statistics	Key statistics counters
+ *
+ * @Return	  The specific key statistics.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set().
+ */
+uint32_t fm_pcd_match_table_get_key_statistics(t_handle h_cc_node,
+			uint16_t		key_index,
+			ioc_fm_pcd_cc_key_statistics_t	*p_key_statistics);
+
+/*
+ * @Function	  fm_pcd_match_table_get_miss_statistics
+ *
+ * @Description   This routine may be used to get statistics counters of miss
+ *		  entry in a CC Node.
+ *
+ *		  If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ *		  'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ *		  node, these counters reflect how many frames were not matched
+ *		  to any existing key and therefore passed through the miss
+ *		  entry; The total frames count will be returned in the counter
+ *		  of the first range (as only one frame length range was
+ *		  defined).
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[out]	  p_miss_statistics	Statistics counters for 'miss'
+ *
+ * @Return	  The statistics for 'miss'.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set().
+ */
+uint32_t fm_pcd_match_table_get_miss_statistics(t_handle h_cc_node,
+		    ioc_fm_pcd_cc_key_statistics_t	*p_miss_statistics);
+
+/*
+ * @Function	  fm_pcd_match_table_find_nget_key_statistics
+ *
+ * @Description   This routine may be used to get statistics counters of
+ *		  specific key in a CC Node.
+ *
+ *		  If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ *		  'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ *		  node, these counters reflect how many frames passed that were
+ *		  matched this key; The total frames count will be returned in
+ *		  the counter of the first range (as only one frame length range
+ *		  was defined). If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for
+ *		  this node, the total frame count will be separated to frame
+ *		  length counters, based on provided frame length ranges.
+ *		  Note that this routine will search the node to locate the
+ *		  index of the required key based on received key parameters.
+ *
+ * @Param[in]	  h_cc_node		A handle to the node
+ * @Param[in]	  key_size		Size of the requested key
+ * @Param[in]	  p_key			A pointer to the requested key
+ * @Param[in]	  p_mask		A pointer to the mask if relevant,
+ *					otherwise pointer to NULL
+ * @Param[out]	  p_key_statistics	Key statistics counters
+ *
+ * @Return	  The specific key statistics.
+ *
+ * @Cautions	  Allowed only following fm_pcd_match_table_set().
+ */
+uint32_t fm_pcd_match_table_find_nget_key_statistics(t_handle h_cc_node,
+			uint8_t		key_size,
+			uint8_t		*p_key,
+			uint8_t		*p_mask,
+			ioc_fm_pcd_cc_key_statistics_t   *p_key_statistics);
+
+/*
+ * @Function	  fm_pcd_match_table_get_next_engine
+ *
+ * @Description   Gets NextEngine of the relevant key_index.
+ *
+ * @Param[in]	  h_cc_node				A handle to the node.
+ * @Param[in]	  key_index				key_index in the
+ *							relevant node.
+ * @Param[out]	  p_fm_pcd_cc_next_engine_params	here updated
+ *							nextEngine parameters
+ *							for the relevant
+ *							key_index of the CC Node
+ *							received as parameter to
+ *							this function
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+uint32_t fm_pcd_match_table_get_next_engine(t_handle	h_cc_node,
+	uint16_t			key_index,
+	ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine_params);
+
+/*
+ * @Function	  fm_pcd_match_table_get_indexed_hash_bucket
+ *
+ * @Description   This routine simulates KeyGen operation on the provided key
+ *		  and calculates to which hash bucket it will be mapped.
+ *
+ * @Param[in]	  h_cc_node			A handle to the node.
+ * @Param[in]	  kg_key_size			Key size as it was configured in
+ *						the KG scheme that leads to this
+ *						hash.
+ * @Param[in]	  p_kg_key			Pointer to the key; must be like
+ *						the key that the KG is
+ *						generated, i.e. the same
+ *						extraction and with mask if
+ *						exist.
+ * @Param[in]	  kg_hash_shift			Hash-shift as it was configured
+ *						in the KG scheme that leads to
+ *						this hash.
+ * @Param[out]	  p_cc_node_bucket_handle	Pointer to the bucket of the
+ *						provided key.
+ * @Param[out]	  p_bucket_index		Index to the bucket of the
+ *						provided key
+ * @Param[out]	  p_last_index			Pointer to last index in the
+ *						bucket of the provided key.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set()
+ */
+uint32_t fm_pcd_match_table_get_indexed_hash_bucket(t_handle h_cc_node,
+				uint8_t	kg_key_size,
+				uint8_t	*p_kg_key,
+				uint8_t	kg_hash_shift,
+				t_handle	*p_cc_node_bucket_handle,
+				uint8_t	*p_bucket_index,
+				uint16_t	*p_last_index);
+
+/*
+ * @Function	  fm_pcd_hash_table_set
+ *
+ * @Description   This routine initializes a hash table structure.
+ *		  KeyGen hash result determines the hash bucket.
+ *		  Next, KeyGen key is compared against all keys of this bucket
+ *		  (exact match).
+ *		  Number of sets (number of buckets) of the hash equals to the
+ *		  number of 1-s in 'hashResMask' in the provided parameters.
+ *		  Number of hash table ways is then calculated by dividing
+ *		  'max_num_of_keys' equally between the hash sets. This is the
+ *		  maximal number of keys that a hash bucket may hold.
+ *		  The hash table is initialized empty and keys may be added to
+ *		  it following the initialization. Keys masks are not supported
+ *		  in current hash table implementation.
+ *		  The initialized hash table can be integrated as a node in a CC
+ *		  tree.
+ *
+ * @Param[in]	  h_fm_pcd	FM PCD module descriptor.
+ * @Param[in]	  p_param	A structure of parameters defining the hash
+ *				table
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_hash_table_set(t_handle h_fm_pcd,
+	ioc_fm_pcd_hash_table_params_t *p_param);
+
+/*
+ * @Function	  fm_pcd_hash_table_delete
+ *
+ * @Description   This routine deletes the provided hash table and released all
+ *		  its allocated resources.
+ *
+ * @Param[in]	  h_hash_tbl	A handle to a hash table
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_delete(t_handle h_hash_tbl);
+
+/*
+ * @Function	  fm_pcd_hash_table_add_key
+ *
+ * @Description   This routine adds the provided key (including next engine
+ *		  parameters of this key) to the hash table.
+ *		  The key is added as the last key of the bucket that it is
+ *		  mapped to.
+ *
+ * @Param[in]	  h_hash_tbl	A handle to a hash table
+ * @Param[in]	  key_size	Key size of added key
+ * @Param[in]	  p_key_params  A pointer to the parameters includes
+ *				new key with next engine parameters; The pointer
+ *				to the key mask must be NULL, as masks are not
+ *				supported in hash table implementation.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_add_key(t_handle h_hash_tbl,
+				uint8_t		key_size,
+				ioc_fm_pcd_cc_key_params_t  *p_key_params);
+
+/*
+ * @Function	  fm_pcd_hash_table_remove_key
+ *
+ * @Description   This routine removes the requested key (including next engine
+ *		  parameters of this key) from the hash table.
+ *
+ * @Param[in]	  h_hash_tbl	A handle to a hash table
+ * @Param[in]	  key_size	Key size of the one to remove.
+ * @Param[in]	  p_key		A pointer to the requested key to remove.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_remove_key(t_handle h_hash_tbl,
+				uint8_t  key_size,
+				uint8_t  *p_key);
+
+/*
+ * @Function	  fm_pcd_hash_table_modify_next_engine
+ *
+ * @Description   This routine modifies the next engine for the provided key.
+ *		  The key should be previously added to the hash table.
+ *
+ * @Param[in]	  h_hash_tbl			A handle to a hash table
+ * @Param[in]	  key_size			Key size of the key to modify.
+ * @Param[in]	  p_key				A pointer to the requested key
+ *						to modify.
+ * @Param[in]	  p_fm_pcd_cc_next_engine	A structure for defining
+ *						new next engine parameters.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ *		  When configuring nextEngine = e_FM_PCD_CC, note that
+ *		  p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ *		  different from the currently changed table.
+ */
+uint32_t fm_pcd_hash_table_modify_next_engine(t_handle h_hash_tbl,
+		uint8_t		key_size,
+		uint8_t		*p_key,
+		ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function	  fm_pcd_hash_table_modify_miss_next_engine
+ *
+ * @Description   This routine modifies the next engine on key match miss.
+ *
+ * @Param[in]	  h_hash_tbl			A handle to a hash table
+ * @Param[in]	  p_fm_pcd_cc_next_engine	A structure for defining
+ *						new next engine parameters.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ *		  When configuring nextEngine = e_FM_PCD_CC, note that
+ *		  p_fm_pcd_cc_next_engine_params->ccParams.h_cc_node must be
+ *		  different from the currently changed table.
+ */
+uint32_t fm_pcd_hash_table_modify_miss_next_engine(t_handle h_hash_tbl,
+	      ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine);
+
+/*
+ * @Function	  fm_pcd_hash_table_get_miss_next_engine
+ *
+ * @Description   Gets NextEngine in case of key match miss.
+ *
+ * @Param[in]	  h_hash_tbl				A handle to a hash table
+ * @Param[out]	  p_fm_pcd_cc_next_engine_params	Next engine parameters
+ *							for the specified hash
+ *							table.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_get_miss_next_engine(t_handle	h_hash_tbl,
+	ioc_fm_pcd_cc_next_engine_params_t *p_fm_pcd_cc_next_engine_params);
+
+/*
+ * @Function	  fm_pcd_hash_table_find_nget_key_statistics
+ *
+ * @Description   This routine may be used to get statistics counters of
+ *		  specific key in a hash table.
+ *
+ *		  If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ *		  'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ *		  node, these counters reflect how many frames passed that were
+ *		  matched this key; The total frames count will be returned in
+ *		  the counter of the first range (as only one frame length range
+ *		  was defined). If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for
+ *		  this node, the total frame count will be separated to frame
+ *		  length counters, based on provided frame length ranges. Note
+ *		  that this routine will identify the bucket of this key in the
+ *		  hash table and will search the bucket to locate the index of
+ *		  the required key based on received key parameters.
+ *
+ * @Param[in]	  h_hash_tbl		A handle to a hash table
+ * @Param[in]	  key_size		Size of the requested key
+ * @Param[in]	  p_key			A pointer to the requested key
+ * @Param[out]	  p_key_statistics	Key statistics counters
+ *
+ * @Return	  The specific key statistics.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_find_nget_key_statistics(t_handle h_hash_tbl,
+			uint8_t		key_size,
+			uint8_t		*p_key,
+			ioc_fm_pcd_cc_key_statistics_t   *p_key_statistics);
+
+/*
+ * @Function	  fm_pcd_hash_table_get_miss_statistics
+ *
+ * @Description   This routine may be used to get statistics counters of 'miss'
+ *		  entry of the a hash table.
+ *
+ *		  If 'e_FM_PCD_CC_STATS_MODE_FRAME' and
+ *		  'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this
+ *		  node, these counters reflect how many frames were not matched
+ *		  to any existing key and therefore passed through the miss
+ *		  entry;
+ *
+ * @Param[in]	  h_hash_tbl		A handle to a hash table
+ * @Param[out]	  p_miss_statistics	Statistics counters for 'miss'
+ *
+ * @Return	  The statistics for 'miss'.
+ *
+ * @Cautions	  Allowed only following fm_pcd_hash_table_set().
+ */
+uint32_t fm_pcd_hash_table_get_miss_statistics(t_handle	h_hash_tbl,
+			ioc_fm_pcd_cc_key_statistics_t   *p_miss_statistics);
+
+/*
+ * @Function	  fm_pcd_manip_node_set
+ *
+ * @Description   This routine should be called for defining a manipulation
+ *		  node. A manipulation node must be defined before the CC node
+ *		  that precedes it.
+ *
+ * @Param[in]	  h_fm_pcd			FM PCD module descriptor.
+ * @Param[in]	  p_fm_pcd_manip_params		A structure of parameters
+ *						defining the manipulation
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_manip_node_set(t_handle h_fm_pcd,
+	ioc_fm_pcd_manip_params_t *p_fm_pcd_manip_params);
+
+/*
+ * @Function	  fm_pcd_manip_node_delete
+ *
+ * @Description   Delete an existing manipulation node.
+ *
+ * @Param[in]	  h_manip_node		A handle to a manipulation node.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_manip_node_set().
+ */
+uint32_t  fm_pcd_manip_node_delete(t_handle h_manip_node);
+
+/*
+ * @Function	  fm_pcd_manip_get_statistics
+ *
+ * @Description   Retrieve the manipulation statistics.
+ *
+ * @Param[in]	  h_manip_node		A handle to a manipulation node.
+ * @Param[out]	  p_fm_pcd_manip_stats	A structure for retrieving the
+ *					manipulation statistics
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_manip_node_set().
+ */
+uint32_t fm_pcd_manip_get_statistics(t_handle h_manip_node,
+	ioc_fm_pcd_manip_stats_t *p_fm_pcd_manip_stats);
+
+/*
+ * @Function	  fm_pcd_manip_node_replace
+ *
+ * @Description   Change existing manipulation node to be according to new
+ *		  requirement.
+ *
+ * @Param[in]	  h_manip_node		A handle to a manipulation node.
+ * @Param[out]	  p_manip_params	A structure of parameters defining the
+ *					change requirement
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_manip_node_set().
+ */
+uint32_t fm_pcd_manip_node_replace(t_handle h_manip_node,
+ioc_fm_pcd_manip_params_t *p_manip_params);
+
+/*
+ * @Function	  fm_pcd_frm_replic_set_group
+ *
+ * @Description   Initialize a Frame Replicator group.
+ *
+ * @Param[in]	  h_fm_pcd			FM PCD module descriptor.
+ * @Param[in]	  p_frm_replic_group_param	A structure of parameters for
+ *						the initialization of the frame
+ *						replicator group.
+ *
+ * @Return	  A handle to the initialized object on success; NULL code
+ *		  otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_init().
+ */
+t_handle fm_pcd_frm_replic_set_group(t_handle h_fm_pcd,
+		ioc_fm_pcd_frm_replic_group_params_t *p_frm_replic_group_param);
+
+/*
+ * @Function	  fm_pcd_frm_replic_delete_group
+ *
+ * @Description   Delete a Frame Replicator group.
+ *
+ * @Param[in]	  h_frm_replic_group	A handle to the frame replicator group.
+ *
+ * @Return	  E_OK on success;  Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_frm_replic_set_group().
+ */
+uint32_t fm_pcd_frm_replic_delete_group(t_handle h_frm_replic_group);
+
+/*
+ * @Function	  fm_pcd_frm_replic_add_member
+ *
+ * @Description   Add the member in the index defined by the member_index.
+ *
+ * @Param[in]	  h_frm_replic_group	A handle to the frame replicator group.
+ * @Param[in]	  member_index		member index for adding.
+ * @Param[in]	  p_member_params	A pointer to the new member parameters.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_frm_replic_set_group() of this
+ *		  group.
+ */
+uint32_t fm_pcd_frm_replic_add_member(t_handle h_frm_replic_group,
+			uint16_t		member_index,
+			ioc_fm_pcd_cc_next_engine_params_t *p_member_params);
+
+/*
+ * @Function	  fm_pcd_frm_replic_remove_member
+ *
+ * @Description   Remove the member defined by the index from the relevant
+ *		  group.
+ *
+ * @Param[in]	  h_frm_replic_group	A handle to the frame replicator group.
+ * @Param[in]	  member_index		member index for removing.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_pcd_frm_replic_set_group() of this
+ * group.
+ */
+uint32_t fm_pcd_frm_replic_remove_member(t_handle h_frm_replic_group,
+				      uint16_t member_index);
+
+/** @} */ /* end of FM_PCD_Runtime_build_grp group */
+/** @} */ /* end of FM_PCD_Runtime_grp group */
+/** @} */ /* end of FM_PCD_grp group */
+/** @} */ /* end of FM_grp group */
+
+#endif /* __FM_PCD_EXT_H */
diff --git a/drivers/net/dpaa/fmlib/fm_port_ext.h b/drivers/net/dpaa/fmlib/fm_port_ext.h
new file mode 100644
index 000000000..df7773562
--- /dev/null
+++ b/drivers/net/dpaa/fmlib/fm_port_ext.h
@@ -0,0 +1,3350 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __FM_PORT_EXT_H
+#define __FM_PORT_EXT_H
+
+#include <errno.h>
+#include "ncsw_ext.h"
+#include "fm_pcd_ext.h"
+#include "fm_ext.h"
+#include "net_ext.h"
+#include "dpaa_integration.h"
+
+/*
+ * @Description   FM Port routines
+ */
+
+/*
+ *
+ * @Group	  lnx_ioctl_FM_grp Frame Manager Linux IOCTL API
+ *
+ * @Description   FM Linux ioctls definitions and enums
+ *
+ * @{
+ */
+
+/*
+ * @Group	  lnx_ioctl_FM_PORT_grp FM Port
+ *
+ * @Description   FM Port API
+ *
+ *		  The FM uses a general module called "port" to represent a Tx
+ *		  port (MAC), an Rx port (MAC), offline parsing flow or host
+ *		  command flow. There may be up to 17 (may change) ports in an
+ *		  FM - 5 Tx ports (4 for the 1G MACs, 1 for the 10G MAC), 5 Rx
+ *		  Ports, and 7 Host command/Offline parsing ports. The SW driver
+ *		  manages these ports as sub-modules of the FM, i.e. after an FM
+ *		  is initialized, its ports may be initialized and operated
+ *		  upon.
+ *
+ *		  The port is initialized aware of its type, but other functions
+ *		  on a port may be indifferent to its type. When necessary, the
+ *		  driver verifies coherency and returns error if applicable.
+ *
+ *		  On initialization, user specifies the port type and it's index
+ *		  (relative to the port's type). Host command and Offline
+ *		  parsing ports share the same id range, I.e user may not
+ *		  initialized host command port 0 and offline parsing port 0.
+ *
+ * @{
+ */
+
+/*
+ * @Description   An enum for defining port PCD modes.
+ *		  (Must match enum e_fm_port_pcd_support defined in
+ *		  fm_port_ext.h)
+ *
+ *		  This enum defines the superset of PCD engines support - i.e.
+ *		  not all engines have to be used, but all have to be enabled.
+ *		  The real flow of a specific frame depends on the PCD
+ *		  configuration and the frame headers and payload. Note: the
+ *		  first engine and the first engine after the parser (if exists)
+ *		  should be in order, the order is important as it will define
+ *		  the flow of the port. However, as for the rest engines (the
+ *		  ones that follows), the order is not important anymore as it
+ *		  is defined by the PCD graph itself.
+ */
+typedef enum ioc_fm_port_pcd_support {
+	e_IOC_FM_PCD_NONE = 0
+			/**< BMI to BMI, PCD is not used */
+	, e_IOC_FM_PCD_PRS_ONLY	/**< Use only Parser */
+	, e_IOC_FM_PCD_PLCR_ONLY	/**< Use only Policer */
+	, e_IOC_FM_PCD_PRS_PLCR/**< Use Parser and Policer */
+	, e_IOC_FM_PCD_PRS_KG	/**< Use Parser and Keygen */
+	, e_IOC_FM_PCD_PRS_KG_AND_CC
+			/**< Use Parser, Keygen and Coarse Classification */
+	, e_IOC_FM_PCD_PRS_KG_AND_CC_AND_PLCR
+			/**< Use all PCD engines */
+	, e_IOC_FM_PCD_PRS_KG_AND_PLCR
+			/**< Use Parser, Keygen and Policer */
+	, e_IOC_FM_PCD_PRS_CC
+			/**< Use Parser and Coarse Classification */
+	, e_IOC_FM_PCD_PRS_CC_AND_PLCR
+			/**< Use Parser and Coarse Classification and Policer */
+	, e_IOC_FM_PCD_CC_ONLY
+			/**< Use only Coarse Classification */
+} ioc_fm_port_pcd_support;
+
+/*
+ * @Collection   FM Frame error
+ */
+typedef uint32_t	ioc_fm_port_frame_err_select_t;
+	/**< typedef for defining Frame Descriptor errors */
+
+/* @} */
+
+/*
+ * @Description   An enum for defining Dual Tx rate limiting scale.
+ *		  (Must match e_fm_port_dual_rate_limiter_scale_down defined in
+ *		  fm_port_ext.h)
+ */
+typedef enum ioc_fm_port_dual_rate_limiter_scale_down {
+	e_IOC_FM_PORT_DUAL_RATE_LIMITER_NONE = 0,
+			/**< Use only single rate limiter*/
+	e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2,
+			/**< Divide high rate limiter by 2 */
+	e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4,
+			/**< Divide high rate limiter by 4 */
+	e_IOC_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8
+			/**< Divide high rate limiter by 8 */
+} ioc_fm_port_dual_rate_limiter_scale_down;
+
+/*
+ * @Description   A structure for defining Tx rate limiting
+ *		  (Must match struct t_fm_port_rate_limit defined in
+ *		  fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_rate_limit_t {
+	uint16_t	max_burst_size;
+			/**< in KBytes for Tx ports, in frames for offline
+			 * parsing ports. (note that for early chips burst size
+			 * is rounded up to a multiply of 1000 frames).
+			 */
+	uint32_t	rate_limit;
+			/**< in Kb/sec for Tx ports, in frame/sec for offline
+			 * parsing ports. Rate limit refers to data rate (rather
+			 * than line rate).
+			 */
+	ioc_fm_port_dual_rate_limiter_scale_down rate_limit_divider;
+			/**< For offline parsing ports only. Not-valid for some
+			 * earlier chip revisions
+			 */
+} ioc_fm_port_rate_limit_t;
+
+
+/*
+ * @Group	  lnx_ioctl_FM_PORT_runtime_control_grp FM Port Runtime Control
+ *		  Unit
+ *
+ * @Description   FM Port Runtime control unit API functions, definitions and
+ *		  enums.
+ *
+ * @{
+ */
+
+/*
+ * @Description   An enum for defining FM Port counters.
+ *		  (Must match enum e_fm_port_counters defined in fm_port_ext.h)
+ */
+typedef enum ioc_fm_port_counters {
+	e_IOC_FM_PORT_COUNTERS_CYCLE,	/**< BMI performance counter */
+	e_IOC_FM_PORT_COUNTERS_TASK_UTIL,	/**< BMI performance counter */
+	e_IOC_FM_PORT_COUNTERS_QUEUE_UTIL,	/**< BMI performance counter */
+	e_IOC_FM_PORT_COUNTERS_DMA_UTIL,	/**< BMI performance counter */
+	e_IOC_FM_PORT_COUNTERS_FIFO_UTIL,	/**< BMI performance counter */
+	e_IOC_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION,
+				/**< BMI Rx only performance counter */
+	e_IOC_FM_PORT_COUNTERS_FRAME,		/**< BMI statistics counter */
+	e_IOC_FM_PORT_COUNTERS_DISCARD_FRAME,	/**< BMI statistics counter */
+	e_IOC_FM_PORT_COUNTERS_DEALLOC_BUF,
+				/**< BMI deallocate buffer statistics counter */
+	e_IOC_FM_PORT_COUNTERS_RX_BAD_FRAME,
+				/**< BMI Rx only statistics counter */
+	e_IOC_FM_PORT_COUNTERS_RX_LARGE_FRAME,
+				/**< BMI Rx only statistics counter */
+	e_IOC_FM_PORT_COUNTERS_RX_FILTER_FRAME,
+				/**< BMI Rx & OP only statistics counter */
+	e_IOC_FM_PORT_COUNTERS_RX_LIST_DMA_ERR,
+				/**< BMI Rx, OP & HC only statistics counter */
+	e_IOC_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,
+				/**< BMI Rx, OP & HC statistics counter */
+	e_IOC_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER,
+				/**< BMI Rx, OP & HC only statistics counter */
+	e_IOC_FM_PORT_COUNTERS_WRED_DISCARD,
+				/**< BMI OP & HC only statistics counter */
+	e_IOC_FM_PORT_COUNTERS_LENGTH_ERR,
+				/**< BMI non-Rx statistics counter */
+	e_IOC_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT,
+				/**< BMI non-Rx statistics counter */
+	e_IOC_FM_PORT_COUNTERS_DEQ_TOTAL,/**< QMI total QM dequeues counter */
+	e_IOC_FM_PORT_COUNTERS_ENQ_TOTAL,/**< QMI total QM enqueues counter */
+	e_IOC_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT,/**< QMI counter */
+	e_IOC_FM_PORT_COUNTERS_DEQ_CONFIRM	/**< QMI counter */
+} ioc_fm_port_counters;
+
+typedef struct ioc_fm_port_bmi_stats_t {
+	uint32_t cnt_cycle;
+	uint32_t cnt_task_util;
+	uint32_t cnt_queue_util;
+	uint32_t cnt_dma_util;
+	uint32_t cnt_fifo_util;
+	uint32_t cnt_rx_pause_activation;
+	uint32_t cnt_frame;
+	uint32_t cnt_discard_frame;
+	uint32_t cnt_dealloc_buf;
+	uint32_t cnt_rx_bad_frame;
+	uint32_t cnt_rx_large_frame;
+	uint32_t cnt_rx_filter_frame;
+	uint32_t cnt_rx_list_dma_err;
+	uint32_t cnt_rx_out_of_buffers_discard;
+	uint32_t cnt_wred_discard;
+	uint32_t cnt_length_err;
+	uint32_t cnt_unsupported_format;
+} ioc_fm_port_bmi_stats_t;
+
+/*
+ * @Description   Structure for Port id parameters.
+ *		  (Description may be inaccurate;
+ *		  must match struct t_fm_port_congestion_grps defined in
+ *		  fm_port_ext.h)
+ *
+ *		  Fields commented 'IN' are passed by the port module to be used
+ *		  by the FM module. Fields commented 'OUT' will be filled by FM
+ *		  before returning to port.
+ */
+typedef struct ioc_fm_port_congestion_groups_t {
+	uint16_t	num_of_congestion_grps_to_consider;
+			/**< The number of required congestion groups to define
+			 * the size of the following array
+			 */
+	uint8_t	congestion_grps_to_consider[FM_NUM_CONG_GRPS];
+			/**< An array of CG indexes; Note that the size of the
+			 * array should be 'num_of_congestion_grps_to_consider'.
+			 */
+	bool	pfc_priorities_enable[FM_NUM_CONG_GRPS][FM_MAX_PFC_PRIO];
+			/**< A matrix that represents the map between the CG ids
+			 * defined in 'congestion_grps_to_consider' to the
+			 * priorities mapping array.
+			 */
+} ioc_fm_port_congestion_groups_t;
+
+
+/*
+ * @Function	  fm_port_disable
+ *
+ * @Description   Gracefully disable an FM port. The port will not start new
+ *		  tasks after all tasks associated with the port are terminated.
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  This is a blocking routine, it returns after port is
+ *		  gracefully stopped, i.e. the port will not except new frames,
+ *		  but it will finish all frames or tasks which were already
+ *		  began
+ */
+#define FM_PORT_IOC_DISABLE   _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(1))
+
+/*
+ * @Function	  fm_port_enable
+ *
+ * @Description   A runtime routine provided to allow disable/enable of port.
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_ENABLE   _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(2))
+
+/*
+ * @Function	  fm_port_set_rate_limit
+ *
+ * @Description   Calling this routine enables rate limit algorithm.
+ *		  By default, this functionality is disabled.
+ *
+ *		  Note that rate - limit mechanism uses the FM time stamp.
+ *		  The selected rate limit specified here would be
+ *		  rounded DOWN to the nearest 16M.
+ *
+ *		  May be used for Tx and offline parsing ports only
+ *
+ * @Param[in]	  ioc_fm_port_rate_limit	A structure of rate limit
+ *						parameters
+ *
+ * @Return	0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_SET_RATE_LIMIT \
+	IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(3), ioc_fm_port_rate_limit_t)
+
+/*
+ * @Function	  fm_port_delete_rate_limit
+ *
+ * @Description   Calling this routine disables the previously enabled rate
+ *		  limit.
+ *
+ *		  May be used for Tx and offline parsing ports only
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_DELETE_RATE_LIMIT _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(5))
+#define FM_PORT_IOC_REMOVE_RATE_LIMIT FM_PORT_IOC_DELETE_RATE_LIMIT
+
+/*
+ * @Function	  fm_port_add_congestion_grps
+ *
+ * @Description   This routine effects the corresponding Tx port.
+ *		  It should be called in order to enable pause frame
+ *		  transmission in case of congestion in one or more of the
+ *		  congestion groups relevant to this port.
+ *		  Each call to this routine may add one or more congestion
+ *		  groups to be considered relevant to this port.
+ *
+ *		  May be used for Rx, or RX+OP ports only (depending on chip)
+ *
+ * @Param[in]	  ioc_fm_port_congestion_groups_t	A pointer to an array of
+ *							congestion group ids to
+ *							consider.
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_ADD_CONGESTION_GRPS	\
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(34), \
+	     ioc_fm_port_congestion_groups_t)
+
+/*
+ * @Function	fm_port_remove_congestion_grps
+ *
+ * @Description   This routine effects the corresponding Tx port. It should be
+ *		  called when congestion groups were defined for this port and
+ *		  are no longer relevant, or pause frames transmitting is not
+ *		  required on their behalf. Each call to this routine may remove
+ *		  one or more congestion groups to be considered relevant to
+ *		  this port.
+ *
+ *		  May be used for Rx, or RX+OP ports only (depending on chip)
+ *
+ * @Param[in]	  ioc_fm_port_congestion_groups_t	A pointer to an array of
+ *							congestion group ids to
+ *							consider.
+ *
+ * @Return	0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_REMOVE_CONGESTION_GRPS	\
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(35), \
+	     ioc_fm_port_congestion_groups_t)
+
+/*
+ * @Function	  fm_port_set_errors_route
+ *
+ * @Description   Errors selected for this routine will cause a frame with that
+ *		  error to be enqueued to error queue.
+ *		  Errors not selected for this routine will cause a frame with
+ *		  that error to be enqueued to the one of the other port queues.
+ *		  By default all errors are defined to be enqueued to error
+ *		  queue. Errors that were configured to be discarded (at
+ *		  initialization) may not be selected here.
+ *
+ *		  May be used for Rx and offline parsing ports only
+ *
+ * @Param[in]	  ioc_fm_port_frame_err_select_t	A list of errors to
+ *							enqueue to error queue
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ *		  (szbs001: How is it possible to have one function that needs
+ *		  to be called BEFORE fm_port_init() implemented as an ioctl,
+ *		  which will ALWAYS be called AFTER the fm_port_init() for that
+ I		  port!?!?!?!???!?!??!?!?)
+ */
+#define FM_PORT_IOC_SET_ERRORS_ROUTE \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(4), \
+	     ioc_fm_port_frame_err_select_t)
+
+/*
+ * @Group	  lnx_ioctl_FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime
+ *		  Control Unit
+ *
+ * @Description   FM Port PCD Runtime control unit API functions, definitions
+ *		  and enums.
+ *
+ * @{
+ */
+
+/*
+ * @Description   A structure defining the KG scheme after the parser.
+ *		  (Must match struct ioc_fm_pcd_kg_scheme_select_t defined in
+ *		  fm_port_ext.h)
+ *
+ *		  This is relevant only to change scheme selection mode - from
+ *		  direct to indirect and vice versa, or when the scheme is
+ *		  selected directly, to select the scheme id.
+ *
+ */
+typedef struct ioc_fm_pcd_kg_scheme_select_t {
+	bool	direct;
+		/**< TRUE to use 'scheme_id' directly, FALSE to use LCV.*/
+	void	*scheme_id;
+		/**< Relevant for 'direct'=TRUE only. 'scheme_id' selects the
+		 * scheme after parser.
+		 */
+} ioc_fm_pcd_kg_scheme_select_t;
+
+/*
+ * @Description   Scheme IDs structure
+ *		  (Must match struct ioc_fm_pcd_port_schemes_params_t defined
+ *		  in fm_port_ext.h)
+ */
+typedef struct ioc_fm_pcd_port_schemes_params_t {
+	uint8_t	num_schemes;
+		/**< Number of schemes for port to be bound to. */
+	void	*scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
+		/**< Array of 'num_schemes' schemes for the port to be bound
+		 * to
+		 */
+} ioc_fm_pcd_port_schemes_params_t;
+
+/*
+ * @Description   A union for defining port protocol parameters for parser
+ *		  (Must match union u_FmPcdHdrPrsOpts defined in fm_port_ext.h)
+ */
+typedef union ioc_fm_pcd_hdr_prs_opts_u {
+	/* MPLS */
+	struct {
+	bool label_interpretation_enable;
+		/**< When this bit is set, the last MPLS label will be
+		 * interpreted as described in HW spec table. When the bit is
+		 * cleared, the parser will advance to MPLS next parse
+		 */
+	ioc_net_header_type next_parse;
+		/**< must be equal or higher than IPv4 */
+	} mpls_prs_options;
+
+	/* VLAN */
+	struct {
+	uint16_t	tag_protocol_id1;
+		/**< User defined Tag Protocol Identifier, to be recognized on
+		 * VLAN TAG on top of 0x8100 and 0x88A8
+		 */
+	uint16_t	tag_protocol_id2;
+		/**< User defined Tag Protocol Identifier, to be recognized on
+		 * VLAN TAG on top of 0x8100 and 0x88A8
+		 */
+	} vlan_prs_options;
+
+	/* PPP */
+	struct{
+		bool		enable_mtu_check;
+		/**< Check validity of MTU according to RFC2516 */
+	} pppoe_prs_options;
+
+	/* IPV6 */
+	struct {
+		bool		routing_hdr_disable;
+		/**< Disable routing header */
+	} ipv6_prs_options;
+
+	/* UDP */
+	struct {
+		bool		pad_ignore_checksum;
+		/**< TRUE to ignore pad in checksum */
+	} udp_prs_options;
+
+	/* TCP */
+	struct {
+		bool		pad_ignore_checksum;
+		/**< TRUE to ignore pad in checksum */
+	} tcp_prs_options;
+} ioc_fm_pcd_hdr_prs_opts_u;
+
+/*
+ * @Description   A structure for defining each header for the parser
+ *		  (must match struct t_FmPcdPrsAdditionalHdrParams defined in
+ *		  fm_port_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_additional_hdr_params_t {
+	ioc_net_header_type	hdr; /**< Selected header */
+	bool	err_disable; /**< TRUE to disable error indication */
+	bool	soft_prs_enable;
+		/**< Enable jump to SW parser when this header is recognized by
+		 * the HW parser.
+		 */
+	uint8_t	index_per_hdr;
+		/**< Normally 0, if more than one sw parser attachments exists
+		 * for the same header, (in the main sw parser code) use this
+		 * index to distinguish between them.
+		 */
+	bool	use_prs_opts;	/**< TRUE to use parser options. */
+	ioc_fm_pcd_hdr_prs_opts_u prs_opts;
+		/**< A unuion according to header type, defining the parser
+		 * options selected.
+		 */
+} ioc_fm_pcd_prs_additional_hdr_params_t;
+
+/*
+ * @Description   A structure for defining port PCD parameters
+ *		  (Must match t_fm_portPcdPrsParams defined in fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_prs_params_t {
+	uint8_t		prs_res_priv_info;
+		/**< The private info provides a method of inserting port
+		 * information into the parser result. This information may be
+		 * extracted by KeyGen and be used for frames distribution when
+		 * a per-port distinction is required, it may also be used as a
+		 * port logical id for analyzing incoming frames.
+		 */
+	uint8_t		parsing_offset;
+		/**< Number of bytes from beginning of packet to start parsing
+		 */
+	ioc_net_header_type	first_prs_hdr;
+		/**< The type of the first header axpected at 'parsing_offset'
+		 */
+	bool		include_in_prs_statistics;
+		/**< TRUE to include this port in the parser statistics */
+	uint8_t		num_of_hdrs_with_additional_params;
+		/**< Normally 0, some headers may get special parameters */
+	ioc_fm_pcd_prs_additional_hdr_params_t
+			additional_params[IOC_FM_PCD_PRS_NUM_OF_HDRS];
+		/**< 'num_of_hdrs_with_additional_params' structures additional
+		 * parameters for each header that requires them
+		 */
+	bool		set_vlan_tpid1;
+		/**< TRUE to configure user selection of Ethertype to indicate a
+		 * VLAN tag (in addition to the TPID values 0x8100 and 0x88A8).
+		 */
+	uint16_t	vlan_tpid1;
+		/**< extra tag to use if set_vlan_tpid1=TRUE. */
+	bool		set_vlan_tpid2;
+		/**< TRUE to configure user selection of Ethertype to indicate a
+		 * VLAN tag (in addition to the TPID values 0x8100 and 0x88A8).
+		 */
+	uint16_t	vlan_tpid2;
+		/**< extra tag to use if set_vlan_tpid1=TRUE. */
+} ioc_fm_port_pcd_prs_params_t;
+
+/*
+ * @Description   A structure for defining coarse alassification parameters
+ *		  (Must match t_fm_portPcdCcParams defined in fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_cc_params_t {
+	void		*cc_tree_id; /**< CC tree id */
+} ioc_fm_port_pcd_cc_params_t;
+
+/*
+ * @Description   A structure for defining keygen parameters
+ *		  (Must match t_fm_portPcdKgParams defined in fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_kg_params_t {
+	uint8_t		num_schemes;
+			/**< Number of schemes for port to be bound to. */
+	void		*scheme_ids[FM_PCD_KG_NUM_OF_SCHEMES];
+			/**< Array of 'num_schemes' schemes for the port to
+			 * be bound to
+			 */
+	bool		direct_scheme;
+			/**< TRUE for going from parser to a specific scheme,
+			 * regardless of parser result
+			 */
+	void		*direct_scheme_id;
+			/**< Scheme id, as returned by FM_PCD_KgSetScheme;
+			 * relevant only if direct=TRUE.
+			 */
+} ioc_fm_port_pcd_kg_params_t;
+
+/*
+ * @Description   A structure for defining policer parameters
+ *		  (Must match t_fm_portPcdPlcrParams defined in fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_plcr_params_t {
+	void	*plcr_profile_id;
+		/**< Selected profile handle;
+		 * relevant in one of the following cases:
+		 * e_IOC_FM_PCD_PLCR_ONLY or
+		 * e_IOC_FM_PCD_PRS_PLCR were selected, or if
+		 * any flow uses a KG scheme where policer profile is not
+		 * generated (bypass_plcr_profile_generation selected)
+		 */
+} ioc_fm_port_pcd_plcr_params_t;
+
+/*
+ * @Description   A structure for defining port PCD parameters
+ *		  (Must match struct t_fm_portPcdParams defined in
+ *		  fm_port_ext.h)
+ */
+typedef struct ioc_fm_port_pcd_params_t {
+	ioc_fm_port_pcd_support	pcd_support;
+		/**< Relevant for Rx and offline ports only.
+		 * Describes the active PCD engines for this port.
+		 */
+	void		*net_env_id;	/**< HL Unused in PLCR only mode */
+	ioc_fm_port_pcd_prs_params_t	*p_prs_params;
+		/**< Parser parameters for this port */
+	ioc_fm_port_pcd_cc_params_t	*p_cc_params;
+		/**< Coarse classification parameters for this port */
+	ioc_fm_port_pcd_kg_params_t	*p_kg_params;
+		/**< Keygen parameters for this port */
+	ioc_fm_port_pcd_plcr_params_t	*p_plcr_params;
+		/**< Policer parameters for this port */
+	void		*p_ip_reassembly_manip;
+		/**< IP Reassembly manipulation */
+	void		*p_capwap_reassembly_manip;
+		/**< CAPWAP Reassembly manipulation */
+} ioc_fm_port_pcd_params_t;
+
+/*
+ * @Description   A structure for defining the Parser starting point
+ *		  (Must match struct ioc_fm_pcd_prs_start_t defined in
+ *		  fm_port_ext.h)
+ */
+typedef struct ioc_fm_pcd_prs_start_t {
+	uint8_t	parsing_offset;
+		/**< Number of bytes from beginning of packet to start parsing
+		 */
+	ioc_net_header_type first_prs_hdr;
+		/**< The type of the first header axpected at 'parsing_offset'
+		 */
+} ioc_fm_pcd_prs_start_t;
+
+/*
+ * @Description   FQID parameters structure
+ */
+typedef struct ioc_fm_port_pcd_fqids_params_t {
+	uint32_t	num_fqids;
+		/**< Number of fqids to be allocated for the port */
+	uint8_t		alignment;
+		/**< Alignment required for this port */
+	uint32_t	base_fqid;
+		/**< output parameter - the base fqid */
+} ioc_fm_port_pcd_fqids_params_t;
+
+/*
+ * @Function	  FM_PORT_IOC_ALLOC_PCD_FQIDS
+ *
+ * @Description   Allocates FQID's
+ *		  May be used for Rx and offline parsing ports only
+ *
+ * @Param[in,out] ioc_fm_port_pcd_fqids_params_t	Parameters for
+ *							allocating FQID's
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_ALLOC_PCD_FQIDS \
+	_IOWR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(19), \
+	      ioc_fm_port_pcd_fqids_params_t)
+
+/*
+ * @Function	  FM_PORT_IOC_FREE_PCD_FQIDS
+ *
+ * @Description   Frees previously-allocated FQIDs
+ *		  May be used for Rx and offline parsing ports only
+ *
+ * @Param[in]	  uint32_t	Base FQID of previously allocated range.
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_FREE_PCD_FQIDS \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(19), uint32_t)
+
+/*
+ * @Function	fm_port_set_pcd
+ *
+ * @Description   Calling this routine defines the port's PCD configuration.
+ *		  It changes it from its default configuration which is PCD
+ *		  disabled (BMI to BMI) and configures it according to the
+ *		  passed parameters.
+ *		  May be used for Rx and offline parsing ports only
+ *
+ * @Param[in]	  ioc_fm_port_pcd_params_t	A Structure of parameters
+ *						defining the port's PCD
+ *						configuration.
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_SET_PCD \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(20), ioc_fm_port_pcd_params_t)
+
+/*
+ * @Function	  fm_port_delete_pcd
+ *
+ * @Description   Calling this routine releases the port's PCD configuration.
+ *		  The port returns to its default configuration which is PCD
+ *		  disabled (BMI to BMI) and all PCD configuration is removed.
+ *		  May be used for Rx and offline parsing ports which are in PCD
+ *		  mode only
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_DELETE_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(21))
+
+/*
+ * @Function	  fm_port_attach_pcd
+ *
+ * @Description   This routine may be called after fm_port_detach_pcd was
+ *		  called, to return to the originally configured PCD support
+ *		  flow. The couple of routines are used to allow PCD
+ *		  configuration changes that demand that PCD will not be used
+ *		  while changes take place.
+ *
+ *		  May be used for Rx and offline parsing ports which are in PCD
+ *		  mode only
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_ATTACH_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(23))
+
+/*
+ * @Function	  fm_port_detach_pcd
+ *
+ * @Description   Calling this routine detaches the port from its PCD
+ *		  functionality. The port returns to its default flow which is
+ *		  BMI to BMI.
+ *
+ *		  May be used for Rx and offline parsing ports which are in PCD
+ *		  mode only
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_DETACH_PCD _IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(22))
+
+/*
+ * @Function	  fm_port_pcd_plcr_alloc_profiles
+ *
+ * @Description   This routine may be called only for ports that use the Policer
+ *		  in order to allocate private policer profiles.
+ *
+ * @Param[in]	  uint16_t	The number of required policer profiles
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed before fm_port_set_pcd() only.
+ */
+#define FM_PORT_IOC_PCD_PLCR_ALLOC_PROFILES	\
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(24), uint16_t)
+
+/*
+ * @Function	  fm_port_pcd_plcr_free_profiles
+ *
+ * @Description   This routine should be called for freeing private policer
+ *		  profiles.
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed before fm_port_set_pcd() only.
+ */
+#define FM_PORT_IOC_PCD_PLCR_FREE_PROFILES	\
+	_IO(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(25))
+
+/*
+ * @Function	  fm_port_pcd_kg_modify_initial_scheme
+ *
+ * @Description   This routine may be called only for ports that use the keygen
+ *		  in order to change the initial scheme frame should be routed
+ *		  to.The change may be of a scheme id (in case of direct mode),
+ *		  from direct to indirect, or from indirect to direct -
+ *		  specifying the scheme id.
+ *
+ * @Param[in]	  ioc_fm_pcd_kg_scheme_select_t
+ *		  A structure of parameters for defining whether a scheme is
+ *		  direct/indirect, and if direct - scheme id.
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_PCD_KG_MODIFY_INITIAL_SCHEME \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(26), \
+	     ioc_fm_pcd_kg_scheme_select_t)
+
+/*
+ * @Function	  fm_port_pcd_plcr_modify_initial_profile
+ *
+ * @Description   This routine may be called for ports with flows
+ *		  e_IOC_FM_PCD_SUPPORT_PLCR_ONLY or
+ *		  e_IOC_FM_PCD_SUPPORT_PRS_AND_PLCR only, to change the initial
+ *		  Policer profile frame should be routed to.
+ *		  The change may be of a profile and / or absolute / direct mode
+ *		  selection.
+ *
+ * @Param[in]	  ioc_fm_obj_t		Policer profile Id as returned from
+ *					FM_PCD_PlcrSetProfile.
+ *
+ * @Return	  0 on success; error code otherwise.
+ */
+#define FM_PORT_IOC_PCD_PLCR_MODIFY_INITIAL_PROFILE \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(27), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_port_pcd_cc_modify_tree
+ *
+ * @Description   This routine may be called to change this port connection to
+ *		  a pre - initializes coarse classification Tree.
+ *
+ * @Param[in]	  ioc_fm_obj_t	Id of new coarse classification tree selected
+ *				for this port.
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_set_pcd() and
+ *		  fm_port_detach_pcd()
+ */
+#define FM_PORT_IOC_PCD_CC_MODIFY_TREE \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(28), ioc_fm_obj_t)
+
+/*
+ * @Function	  fm_port_pcd_kg_bind_schemes
+ *
+ * @Description   These routines may be called for modifying the binding of
+ *		  ports to schemes. The scheme itself is not added, just this
+ *		  specific port starts using it.
+ *
+ * @Param[in]	  ioc_fm_pcd_port_schemes_params_t	Schemes parameters
+ *							structure
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_set_pcd().
+ */
+#define FM_PORT_IOC_PCD_KG_BIND_SCHEMES \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(30), \
+	     ioc_fm_pcd_port_schemes_params_t)
+
+/*
+ * @Function	  fm_port_pcd_kg_unbind_schemes
+ *
+ * @Description   These routines may be called for modifying the binding of
+ *		  ports to schemes. The scheme itself is not removed or
+ *		  invalidated, just this specific port stops using it.
+ *
+ * @Param[in]	  ioc_fm_pcd_port_schemes_params_t	Schemes parameters
+ *							structure
+ *
+ * @Return	  0 on success; error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_set_pcd().
+ */
+#define FM_PORT_IOC_PCD_KG_UNBIND_SCHEMES \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(31), \
+	     ioc_fm_pcd_port_schemes_params_t)
+
+#define ENET_NUM_OCTETS_PER_ADDRESS 6
+		/**< Number of octets (8-bit bytes) in an ethernet address */
+typedef struct ioc_fm_port_mac_addr_params_t {
+	uint8_t addr[ENET_NUM_OCTETS_PER_ADDRESS];
+} ioc_fm_port_mac_addr_params_t;
+
+/*
+ * @Function	  FM_MAC_AddHashMacAddr
+ *
+ * @Description   Add an Address to the hash table. This is for filter purpose
+ *		  only.
+ *
+ * @Param[in]	  ioc_fm_port_mac_addr_params_t		Ethernet Mac address
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following FM_MAC_Init(). It is a filter only
+ *		  address.
+ * @Cautions	  Some address need to be filtered out in upper FM blocks.
+ */
+#define FM_PORT_IOC_ADD_RX_HASH_MAC_ADDR  \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(36), \
+	     ioc_fm_port_mac_addr_params_t)
+
+/*
+ * @Function	  FM_MAC_RemoveHashMacAddr
+ *
+ * @Description   Delete an Address to the hash table. This is for filter
+ *		  purpose only.
+ *
+ * @Param[in]	  ioc_fm_port_mac_addr_params_t		Ethernet Mac address
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following FM_MAC_Init().
+ */
+#define FM_PORT_IOC_REMOVE_RX_HASH_MAC_ADDR  \
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(37), \
+	     ioc_fm_port_mac_addr_params_t)
+
+typedef struct ioc_fm_port_tx_pause_frames_t {
+	uint8_t  priority;
+	uint16_t pause_time;
+	uint16_t thresh_time;
+} ioc_fm_port_tx_pause_frames_t;
+
+/*
+ * @Function	  FM_MAC_SetTxPauseFrames
+ *
+ * @Description   Enable/Disable transmission of Pause-Frames. The routine
+ *		  changes the default configuration: pause-time - [0xf000]
+ *		  threshold-time - [0]
+ *
+ * @Param[in]	  ioc_fm_port_tx_pause_frames_params_t
+ *		  A structure holding the required parameters.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following FM_MAC_Init(). PFC is supported only on
+ *		  new mEMAC; i.e. in MACs that don't have PFC support (10G-MAC
+ *		  and dTSEC), user should use 'FM_MAC_NO_PFC' in the 'priority'
+ *		  field.
+ */
+#define FM_PORT_IOC_SET_TX_PAUSE_FRAMES	\
+	_IOW(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(40), \
+		ioc_fm_port_tx_pause_frames_t)
+
+typedef struct ioc_fm_port_mac_statistics_t {
+	/* RMON */
+	uint64_t  e_stat_pkts_64;
+		/**< r-10G tr-DT 64 byte frame counter */
+	uint64_t  e_stat_pkts_65_to_127;
+		/**< r-10G 65 to 127 byte frame counter */
+	uint64_t  e_stat_pkts_128_to_255;
+		/**< r-10G 128 to 255 byte frame counter */
+	uint64_t  e_stat_pkts_256_to_511;
+		/**< r-10G 256 to 511 byte frame counter */
+	uint64_t  e_stat_pkts_512_to_1023;
+		/**< r-10G 512 to 1023 byte frame counter*/
+	uint64_t  e_stat_pkts_1024_to_1518;
+		/**< r-10G 1024 to 1518 byte frame counter */
+	uint64_t  e_stat_pkts_1519_to_1522;
+		/**< r-10G 1519 to 1522 byte good frame count */
+	/* */
+	uint64_t  e_stat_fragments;
+		/**< Total number of packets that were less than 64 octets long
+		 * with a wrong CRC.
+		 */
+	uint64_t  e_stat_jabbers;
+		/**< Total number of packets longer than valid maximum length
+		 * octets
+		 */
+	uint64_t  e_stat_drop_events;
+		/**< number of dropped packets due to internal errors of the MAC
+		 * Client (during receive).
+		 */
+	uint64_t  e_stat_CRC_align_errors;
+		/**< Incremented when frames of correct length but with CRC
+		 * error are received.
+		 */
+	uint64_t  e_stat_undersize_pkts;
+		/**< Incremented for frames under 64 bytes with a valid FCS and
+		 * otherwise well formed; This count does not include range
+		 * length errors
+		 */
+	uint64_t  e_stat_oversize_pkts;
+		/**< Incremented for frames which exceed 1518 (non VLAN) or 1522
+		 * (VLAN) and contains a valid FCS and otherwise well formed
+		 */
+	/* Pause */
+	uint64_t  rx_stat_pause;	/**< Pause MAC Control received */
+	uint64_t  tx_stat_pause;	/**< Pause MAC Control sent */
+	/* MIB II */
+	uint64_t  if_in_octets;		/**< Total number of byte received. */
+	uint64_t  if_in_pkts;		/**< Total number of packets received.*/
+	uint64_t  if_in_ucast_pkts;
+		/**< Total number of unicast frame received;
+		 * NOTE: this counter is not supported on dTSEC MAC
+		 */
+	uint64_t  if_in_mcast_pkts;
+		/**< Total number of multicast frame received*/
+	uint64_t  if_in_bcast_pkts;
+		/**< Total number of broadcast frame received */
+	uint64_t  if_in_discards;
+		/**< Frames received, but discarded due to problems within the
+		 * MAC RX.
+		 */
+	uint64_t  if_in_errors;
+		/**< Number of frames received with error:
+		 *	- FIFO Overflow Error
+		 *	- CRC Error
+		 *	- Frame Too Long Error
+		 *	- Alignment Error
+		 *	- The dedicated Error Code (0xfe, not a code error) was
+		 *	  received
+		 */
+	uint64_t  if_out_octets;	/**< Total number of byte sent. */
+	uint64_t  if_out_pkts;		/**< Total number of packets sent .*/
+	uint64_t  if_out_ucast_pkts;
+		/**< Total number of unicast frame sent;
+		 * NOTE: this counter is not supported on dTSEC MAC
+		 */
+	uint64_t  if_out_mcast_pkts;
+		/**< Total number of multicast frame sent */
+	uint64_t  if_out_bcast_pkts;
+		/**< Total number of multicast frame sent */
+	uint64_t  if_out_discards;
+		/**< Frames received, but discarded due to problems within the
+		 * MAC TX N/A!.
+		 */
+	uint64_t  if_out_errors;
+		/**< Number of frames transmitted with error:
+		 *	- FIFO Overflow Error
+		 *	- FIFO Underflow Error
+		 *	- Other
+		 */
+} ioc_fm_port_mac_statistics_t;
+
+/*
+ * @Function	  FM_MAC_GetStatistics
+ *
+ * @Description   get all MAC statistics counters
+ *
+ * @Param[out]	  ioc_fm_port_mac_statistics_t	A structure holding the
+ *						statistics
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following FM_Init().
+ */
+#define FM_PORT_IOC_GET_MAC_STATISTICS	\
+	_IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(41), \
+	     ioc_fm_port_mac_statistics_t)
+
+/*
+ * @Function	  fm_port_get_bmi_counters
+ *
+ * @Description   Read port's BMI stat counters and place them into
+ *		  a designated structure of counters.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[out]	  p_bmi_stats	counters structure
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+
+#define FM_PORT_IOC_GET_BMI_COUNTERS \
+	_IOR(FM_IOC_TYPE_BASE, FM_PORT_IOC_NUM(42), ioc_fm_port_bmi_stats_t)
+
+/** @} */ /* end of lnx_ioctl_FM_PORT_pcd_runtime_control_grp group */
+/** @} */ /* end of lnx_ioctl_FM_PORT_runtime_control_grp group */
+
+/** @} */ /* end of lnx_ioctl_FM_PORT_grp group */
+/** @} */ /* end of lnx_ioctl_FM_grp group */
+
+
+/*
+ * @Group	  gen_id	General Drivers Utilities
+ *
+ * @Description   External routines.
+ *
+ * @{
+ */
+
+/*
+ * @Group	  gen_error_id	Errors, Events and Debug
+ *
+ * @Description   External routines.
+ *
+ * @{
+ */
+
+/*
+ * The scheme below provides the bits description for error codes:
+ *
+ *  0   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15
+ * |	Reserved (should be zero)	|	Module ID		|
+ *
+ *  16   17   18   19   20   21   22  23   24   25   26   27   28   29   30   31
+ * |				Error Type			       |
+ */
+
+#define ERROR_CODE(_err)  ((((uint32_t)_err) & 0x0000FFFF) | __ERR_MODULE__)
+
+#define GET_ERROR_TYPE(_errcode)	((_errcode) & 0x0000FFFF)
+			/**< Extract module code from error code (#uint32_t) */
+
+#define GET_ERROR_MODULE(_errcode)  ((_errcode) & 0x00FF0000)
+			/**< Extract error type (#e_error_type) from
+			 * error code (#uint32_t)
+			 */
+
+#define RETURN_ERROR(_level, _err, _vmsg) { return ERROR_CODE(_err); }
+
+/*
+ * @Description  Error Type Enumeration
+ */
+typedef enum e_error_type {
+	E_OK = 0
+		/* Never use "RETURN_ERROR" with E_OK; Use "return E_OK;"*/
+	, E_WRITE_FAILED = EIO
+		/**< Write access failed on memory/device.*/
+		/* String: none, or device name.*/
+	, E_NO_DEVICE = ENXIO
+		/**< The associated device is not initialized.*/
+		/* String: none.*/
+	, E_NOT_AVAILABLE = EAGAIN
+		/**< Resource is unavailable.*/
+		/* String: none, unless the operation is not the main goal of
+		 *	   the function (in this case add resource description).
+		 */
+	, E_NO_MEMORY = ENOMEM
+		/**< External memory allocation failed.*/
+		/* String: description of item for which allocation failed. */
+	, E_INVALID_ADDRESS = EFAULT
+		/**< Invalid address.*/
+		/*   String: description of the specific violation.*/
+	, E_BUSY = EBUSY
+		/**< Resource or module is busy.*/
+		/* String: none, unless the operation is not the main goal
+		 *	   of the function (in this case add resource
+		 *	   description).
+		 */
+	, E_ALREADY_EXISTS = EEXIST
+		/**< Requested resource or item already exists.*/
+		/* Use when resource duplication or sharing are not allowed.
+		 * String: none, unless the operation is not the main goal
+		 *	   of the function (in this case add item description).
+		 */
+	, E_INVALID_OPERATION = ENODEV
+		/**< The operation/command is invalid (unrecognized).*/
+		/* String: none.*/
+	, E_INVALID_VALUE = EDOM
+		/**< Invalid value.*/
+		/* Use for non-enumeration parameters, and only when other error
+		 * types are not suitable.
+		 * String: parameter description + "(should be <attribute>)",
+		 *	   e.g: "Maximum Rx buffer length (should be divisible
+		 *	   by 8)", "Channel number (should be even)".
+		 */
+	, E_NOT_IN_RANGE = ERANGE
+		/**< Parameter value is out of range.*/
+		/* Don't use this error for enumeration parameters.
+		 * String: parameter description + "(should be %d-%d)",
+		 *	   e.g: "Number of pad characters (should be 0-15)".
+		 */
+	, E_NOT_SUPPORTED = ENOSYS
+		/**< The function is not supported or not implemented.*/
+		/* String: none.*/
+	, E_INVALID_STATE
+		/**< The operation is not allowed in current module state.*/
+		/* String: none.*/
+	, E_INVALID_HANDLE
+		/**< Invalid handle of module or object.*/
+		/* String: none, unless the function takes in more than one
+		 *	   handle (in this case add the handle description)
+		 */
+	, E_INVALID_ID
+		/**< Invalid module ID (usually enumeration or index).*/
+		/* String: none, unless the function takes in more than one ID
+		 *	   (in this case add the ID description)
+		 */
+	, E_NULL_POINTER
+		/**< Unexpected NULL pointer.*/
+		/* String: pointer description.*/
+	, E_INVALID_SELECTION
+		/**< Invalid selection or mode.*/
+		/* Use for enumeration values, only when other error types are
+		 * not suitable.
+		 * String: parameter description.
+		 */
+	, E_INVALID_COMM_MODE
+		/**< Invalid communication mode.*/
+		/* String: none, unless the function takes in more than one
+		 *	   communication mode indications (in this case add
+		 *	   parameter description).
+		 */
+	, E_INVALID_MEMORY_TYPE
+		/**< Invalid memory type.*/
+		/* String: none, unless the function takes in more than one
+		 *	   memory types (in this case add memory description,
+		 *	   e.g: "Data memory", "Buffer descriptors memory").
+		 */
+	, E_INVALID_CLOCK
+		/**< Invalid clock.*/
+		/* String: none, unless the function takes in more than one
+		 *	   clocks (in this case add clock description, e.g: "Rx
+		 *	   clock", "Tx clock").
+		 */
+	, E_CONFLICT
+		/**< Some setting conflicts with another setting.*/
+		/* String: description of the conflicting settings.*/
+	, E_NOT_ALIGNED
+		/**< Non-aligned address.*/
+		/* String: parameter description + "(should be %d-bytes
+		 *	   aligned)", e.g: "Rx data buffer (should be 32-bytes
+		 *	   aligned)".
+		 */
+	, E_NOT_FOUND
+		/**< Requested resource or item was not found.*/
+		/* Use only when the resource/item is uniquely identified.
+		 * String: none, unless the operation is not the main goal
+		 *	   of the function (in this case add item description).
+		 */
+	, E_FULL
+		/**< Resource is full.*/
+		/* String: none, unless the operation is not the main goal of
+		 *	   the function (in this case add resource description).
+		 */
+	, E_EMPTY
+		/**< Resource is empty.*/
+		/* String: none, unless the operation is not the main goal of
+		 *	   the function (in this case add resource description).
+		 */
+	, E_ALREADY_FREE
+		/**< Specified resource or item is already free or deleted.*/
+		/* String: none, unless the operation is not the main goal
+		 *	   of the function (in this case add item description).
+		 */
+	, E_READ_FAILED
+		/**< Read access failed on memory/device.*/
+		/* String: none, or device name.*/
+	, E_INVALID_FRAME
+		/**< Invalid frame object (NULL handle or missing buffers).*/
+		/* String: none.*/
+	, E_SEND_FAILED
+		/**< Send operation failed on device.*/
+		/* String: none, or device name.*/
+	, E_RECEIVE_FAILED
+		/**< Receive operation failed on device.*/
+		/* String: none, or device name.*/
+	, E_TIMEOUT/* = ETIMEDOUT*/
+		/**< The operation timed out.*/
+		/* String: none.*/
+
+	, E_DUMMY_LAST	/* NEVER USED */
+
+} e_error_type;
+
+/*
+ *
+ * @Group	  FM_grp Frame Manager API
+ *
+ * @Description   FM API functions, definitions and enums
+ *
+ * @{
+ */
+
+/*
+ * @Group	  FM_PORT_grp FM Port
+ *
+ * @Description   FM Port API
+ *
+ *		  The FM uses a general module called "port" to represent a Tx
+ *		  port (MAC), an Rx port (MAC) or Offline Parsing port. The
+ *		  number of ports in an FM varies between SOCs. The SW driver
+ *		  manages these ports as sub-modules of the FM, i.e. after an FM
+ *		  is initialized, its ports may be initialized and operated
+ *		  upon.
+ *
+ *		  The port is initialized aware of its type, but other functions
+ *		  on a port may be indifferent to its type. When necessary, the
+ *		  driver verifies coherence and returns error if applicable.
+ *
+ *		  On initialization, user specifies the port type and it's index
+ *		  (relative to the port's type) - always starting at 0.
+ *
+ * @{
+ */
+
+/*
+ * @Description   An enum for defining port PCD modes.
+ *		  This enum defines the superset of PCD engines support - i.e.
+ *		  not all engines have to be used, but all have to be enabled.
+ *		  The real flow of a specific frame depends on the PCD
+ *		  configuration and the frame headers and payload. Note: the
+ *		  first engine and the first engine after the parser (if exists)
+ *		  should be in order, the order is important as it will define
+ *		  the flow of the port. However, as for the rest engines (the
+ *		  ones that follows), the order is not important anymore as it
+ *		  is defined by the PCD graph itself.
+ */
+typedef enum e_fm_port_pcd_support {
+	e_FM_PORT_PCD_SUPPORT_NONE = 0
+		/**< BMI to BMI, PCD is not used */
+	, e_FM_PORT_PCD_SUPPORT_PRS_ONLY
+		/**< Use only Parser */
+	, e_FM_PORT_PCD_SUPPORT_PLCR_ONLY
+		/**< Use only Policer */
+	, e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR
+		/**< Use Parser and Policer */
+	, e_FM_PORT_PCD_SUPPORT_PRS_AND_KG
+		/**< Use Parser and Keygen */
+	, e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC
+		/**< Use Parser, Keygen and Coarse Classification */
+	, e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR
+		/**< Use all PCD engines */
+	, e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR
+		/**< Use Parser, Keygen and Policer */
+	, e_FM_PORT_PCD_SUPPORT_PRS_AND_CC
+		/**< Use Parser and Coarse Classification */
+	, e_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR
+		/**< Use Parser and Coarse Classification and Policer */
+	, e_FM_PORT_PCD_SUPPORT_CC_ONLY
+		/**< Use only Coarse Classification */
+#ifdef FM_CAPWAP_SUPPORT
+	, e_FM_PORT_PCD_SUPPORT_CC_AND_KG
+		/**< Use Coarse Classification,and Keygen */
+	, e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR
+		/**< Use Coarse Classification, Keygen and Policer */
+#endif /* FM_CAPWAP_SUPPORT */
+} e_fm_port_pcd_support;
+
+/*
+ * @Description   Port interrupts
+ */
+typedef enum e_fm_port_exceptions {
+	e_FM_PORT_EXCEPTION_IM_BUSY	/**< Independent-Mode Rx-BUSY */
+} e_fm_port_exceptions;
+
+/*
+ * @Collection	General FM Port defines
+ */
+#define FM_PORT_PRS_RESULT_NUM_OF_WORDS	8
+		/**< Number of 4 bytes words in parser result */
+/* @} */
+
+/*
+ * @Collection   FM Frame error
+ */
+typedef uint32_t	fm_port_frame_err_select_t;
+			/**< typedef for defining Frame Descriptor errors */
+
+#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT FM_FD_ERR_UNSUPPORTED_FORMAT
+			/**< Not for Rx-Port! Unsupported Format */
+#define FM_PORT_FRM_ERR_LENGTH		FM_FD_ERR_LENGTH
+			/**< Not for Rx-Port! Length Error */
+#define FM_PORT_FRM_ERR_DMA		FM_FD_ERR_DMA	/**< DMA Data error */
+#define FM_PORT_FRM_ERR_NON_FM		FM_FD_RX_STATUS_ERR_NON_FM
+			/**< non Frame-Manager error; probably come from SEC
+			 * that was chained to FM
+			 */
+
+#define FM_PORT_FRM_ERR_IPRE		(FM_FD_ERR_IPR & ~FM_FD_IPR)
+			/**< IPR error */
+#define FM_PORT_FRM_ERR_IPR_NCSP	(FM_FD_ERR_IPR_NCSP & ~FM_FD_IPR)
+			/**< IPR non-consistent-sp */
+
+#define FM_PORT_FRM_ERR_IPFE		0
+			/**< Obsolete; will be removed in the future */
+
+#ifdef FM_CAPWAP_SUPPORT
+#define FM_PORT_FRM_ERR_CRE		FM_FD_ERR_CRE
+#define FM_PORT_FRM_ERR_CHE		FM_FD_ERR_CHE
+#endif /* FM_CAPWAP_SUPPORT */
+
+#define FM_PORT_FRM_ERR_PHYSICAL	FM_FD_ERR_PHYSICAL
+			/**< Rx FIFO overflow, FCS error, code error, running
+			 * disparity error (SGMII and TBI modes), FIFO parity
+			 * error. PHY Sequence error, PHY error control
+			 * character detected.
+			 */
+#define FM_PORT_FRM_ERR_SIZE		FM_FD_ERR_SIZE
+			/**< Frame too long OR Frame size exceeds
+			 * max_length_frame
+			 */
+#define FM_PORT_FRM_ERR_CLS_DISCARD	FM_FD_ERR_CLS_DISCARD
+			/**< indicates a classifier "drop" operation */
+#define FM_PORT_FRM_ERR_EXTRACTION	FM_FD_ERR_EXTRACTION
+			/**< Extract Out of Frame */
+#define FM_PORT_FRM_ERR_NO_SCHEME	FM_FD_ERR_NO_SCHEME
+			/**< No Scheme Selected */
+#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW FM_FD_ERR_KEYSIZE_OVERFLOW
+			/**< Keysize Overflow */
+#define FM_PORT_FRM_ERR_COLOR_RED	FM_FD_ERR_COLOR_RED
+			/**< Frame color is red */
+#define FM_PORT_FRM_ERR_COLOR_YELLOW	FM_FD_ERR_COLOR_YELLOW
+			/**< Frame color is yellow */
+#define FM_PORT_FRM_ERR_ILL_PLCR	FM_FD_ERR_ILL_PLCR
+			/**< Illegal Policer Profile selected */
+#define FM_PORT_FRM_ERR_PLCR_FRAME_LEN	FM_FD_ERR_PLCR_FRAME_LEN
+			/**< Policer frame length error */
+#define FM_PORT_FRM_ERR_PRS_TIMEOUT	FM_FD_ERR_PRS_TIMEOUT
+			/**< Parser Time out Exceed */
+#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT FM_FD_ERR_PRS_ILL_INSTRUCT
+			/**< Invalid Soft Parser instruction */
+#define FM_PORT_FRM_ERR_PRS_HDR_ERR	FM_FD_ERR_PRS_HDR_ERR
+			/**< Header error was identified during parsing */
+#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED	FM_FD_ERR_BLOCK_LIMIT_EXCEEDED
+			/**< Frame parsed beyind 256 first bytes */
+#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT	0x00000001
+			/**< FPM Frame Processing Timeout Exceeded */
+/* @} */
+
+
+/*
+ * @Group	  FM_PORT_init_grp FM Port Initialization Unit
+ *
+ * @Description   FM Port Initialization Unit
+ *
+ * @{
+ */
+
+/*
+ * @Description   Exceptions user callback routine, will be called upon an
+ *		  exception passing the exception identification.
+ *
+ * @Param[in]	  h_app		User's application descriptor.
+ * @Param[in]	  exception	The exception.
+ */
+typedef void (t_fm_port_exception_callback) (t_handle h_app,
+					e_fm_port_exceptions exception);
+
+/*
+ * @Description   User callback function called by driver with received data.
+ *		  User provides this function. Driver invokes it.
+ *
+ * @Param[in]	  h_app		Application's handle originally specified to
+ *				the API Config function
+ * @Param[in]	  p_data	A pointer to data received
+ * @Param[in]	  length	length of received data
+ * @Param[in]	  status	receive status and errors
+ * @Param[in]	  position	position of buffer in frame
+ * @Param[in]	  h_buf_context	A handle of the user acossiated with this buffer
+ *
+ * @Retval	  e_RX_STORE_RESPONSE_CONTINUE
+ *		  order the driver to continue Rx operation for all ready data.
+ * @Retval	  e_RX_STORE_RESPONSE_PAUSE
+ *		  order the driver to stop Rx operation.
+ */
+typedef e_rx_store_response(t_fm_port_im_rx_store_callback) (t_handle h_app,
+					uint8_t  *p_data,
+					uint16_t length,
+					uint16_t status,
+					uint8_t  position,
+					t_handle h_buf_context);
+
+/*
+ * @Description   User callback function called by driver when transmit
+ *		  completed.
+ *		  User provides this function. Driver invokes it.
+ *
+ * @Param[in]	  h_app		Application's handle originally specified to
+ *				the API Config function
+ * @Param[in]	  p_data	A pointer to data received
+ * @Param[in]	  status	transmit status and errors
+ * @Param[in]	  last_buffer	is last buffer in frame
+ * @Param[in]	  h_buf_context	A handle of the user acossiated with this buffer
+ */
+typedef void (t_fm_port_im_tx_conf_callback) (t_handle   h_app,
+				uint8_t	*p_data,
+				uint16_t   status,
+				t_handle   h_buf_context);
+
+/*
+ * @Description   A structure for additional Rx port parameters
+ */
+typedef struct t_fm_port_rx_params {
+	uint32_t		err_fqid;	/**< Error Queue Id. */
+	uint32_t		dflt_fqid;	/**< Default Queue Id.*/
+	uint16_t		liodn_offset;	/**< Port's LIODN offset. */
+	t_fm_ext_pools		ext_buf_pools;
+			/**< Which external buffer pools are used
+			 * (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes
+			 */
+} t_fm_port_rx_params;
+
+/*
+ * @Description   A structure for additional non-Rx port parameters
+ */
+typedef struct t_fm_port_non_rx_params {
+	uint32_t		err_fqid;	/**< Error Queue Id. */
+	uint32_t		dflt_fqid;
+			/**< For Tx - Default Confirmation queue,
+			 * 0 means no Tx confirmation for processed frames.
+			 * For OP port - default Rx queue.
+			 */
+	uint32_t		qm_channel;
+			/**< QM-channel dedicated to this port; will be used by
+			 * the FM for dequeue.
+			 */
+} t_fm_port_non_rx_params;
+
+/*
+ * @Description   A structure for additional Rx port parameters
+ */
+typedef struct t_fm_port_im_rx_tx_params {
+	t_handle			h_fm_muram;
+			/**< A handle of the FM-MURAM partition */
+	uint16_t			liodn_offset;
+			/**< For Rx ports only. Port's LIODN Offset. */
+	uint8_t			data_mem_id;
+			/**< Memory partition ID for data buffers */
+	uint32_t			data_mem_attributes;
+			/**< Memory attributes for data buffers */
+	t_buffer_pool_info		rx_pool_params;
+			/**< For Rx ports only. */
+	t_fm_port_im_rx_store_callback   *f_rx_store;
+			/**< For Rx ports only. */
+	t_fm_port_im_tx_conf_callback	*f_tx_conf;
+			/**< For Tx ports only. */
+} t_fm_port_im_rx_tx_params;
+
+/*
+ * @Description   A union for additional parameters depending on port type
+ */
+typedef union u_fm_port_specific_params {
+	t_fm_port_im_rx_tx_params	im_rx_tx_params;
+			/**< Rx/Tx Independent-Mode port parameter structure */
+	t_fm_port_rx_params	rx_params;
+			/**< Rx port parameters structure */
+	t_fm_port_non_rx_params	non_rx_params;
+			/**< Non-Rx port parameters structure */
+} u_fm_port_specific_params;
+
+/*
+ * @Description   A structure representing FM initialization parameters
+ */
+typedef struct t_fm_port_params {
+	uintptr_t	base_addr;
+			/**< Virtual Address of memory mapped FM Port registers.
+			 */
+	t_handle	h_fm;
+			/**< A handle to the FM object this port related to */
+	e_fm_port_type	port_type;	/**< Port type */
+	uint8_t		port_id;
+			/**< Port Id - relative to type;
+			 * NOTE: When configuring Offline Parsing port for
+			 * FMANv3 devices (DPAA_VERSION 11 and higher),
+			 * it is highly recommended NOT to use port_id=0 due to
+			 * lack of HW resources on port_id=0.
+			 */
+	bool		independent_mode_enable;
+			/**< This port is Independent-Mode - Used for Rx/Tx
+			 * ports only!
+			 */
+	uint16_t		liodn_base;
+			/**< Irrelevant for P4080 rev 1. LIODN base for this
+			 * port, to be used together with LIODN offset.
+			 */
+	u_fm_port_specific_params	specific_params;
+			/**< Additional parameters depending on port type. */
+
+	t_fm_port_exception_callback   *f_exception;
+			/**< Relevant for IM only Callback routine to be called
+			 * on BUSY exception
+			 */
+	t_handle		h_app;
+			/**< A handle to an application layer object; This
+			 * handle will be passed by the driver upon calling the
+			 * above callbacks
+			 */
+} t_fm_port_params;
+
+/*
+ * @Function	  fm_port_config
+ *
+ * @Description   Creates a descriptor for the FM PORT module.
+ *
+ *		  The routine returns a handle(descriptor) to the FM PORT
+ *		  object. This descriptor must be passed as first parameter to
+ *		  all other FM PORT function calls.
+ *
+ *		  No actual initialization or configuration of FM hardware is
+ *		  done by this routine.
+ *
+ * @Param[in]	  p_fm_port_params	Pointer to data structure of parameters
+ *
+ * @Retval	  Handle to FM object, or NULL for Failure.
+ */
+t_handle fm_port_config(t_fm_port_params *p_fm_port_params);
+
+/*
+ * @Function	  fm_port_init
+ *
+ * @Description   Initializes the FM PORT module by defining the software
+ *		  structure and configuring the hardware registers.
+ *
+ * @Param[in]	  h_fm_port - FM PORT module descriptor
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ */
+uint32_t fm_port_init(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_free
+ *
+ * @Description   Frees all resources that were assigned to FM PORT module.
+ *
+ *		  Calling this routine invalidates the descriptor.
+ *
+ * @Param[in]	  h_fm_port - FM PORT module descriptor
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ */
+uint32_t fm_port_free(t_handle h_fm_port);
+
+t_handle fm_port_open(t_fm_port_params *p_fm_port_params);
+void fm_port_close(t_handle h_fm_port);
+
+
+/*
+ * @Group	  FM_PORT_advanced_init_grp	FM Port Advanced Configuration
+ *						Unit
+ *
+ * @Description   Configuration functions used to change default values.
+ *
+ * @{
+ */
+
+/*
+ * @Description   enum for defining QM frame dequeue
+ */
+typedef enum e_fm_port_deq_type {
+	e_FM_PORT_DEQ_TYPE1,
+		/**< Dequeue from the SP channel - with priority precedence,
+		 * and Intra-Class Scheduling respected.
+		 */
+	e_FM_PORT_DEQ_TYPE2,
+		/**< Dequeue from the SP channel - with active FQ precedence,
+		 * and Intra-Class Scheduling respected.
+		 */
+	e_FM_PORT_DEQ_TYPE3
+		/**< Dequeue from the SP channel - with active FQ precedence,
+		 * and override Intra-Class Scheduling
+		 */
+} e_fm_port_deq_type;
+
+/*
+ * @Description   enum for defining QM frame dequeue
+ */
+typedef enum e_fm_port_deq_prefetch_option {
+	e_FM_PORT_DEQ_NO_PREFETCH,
+		/**< QMI performs a dequeue action for a single frame
+		 * only when a dedicated portID Tnum is waiting.
+		 */
+	e_FM_PORT_DEQ_PARTIAL_PREFETCH,
+		/**< QMI performs a dequeue action for 3 frames
+		 * when one dedicated port_id tnum is waiting.
+		 */
+	e_FM_PORT_DEQ_FULL_PREFETCH
+		/**< QMI performs a dequeue action for 3 frames when
+		 * no dedicated port_id tnums are waiting.
+		 */
+
+} e_fm_port_deq_prefetch_option;
+
+/*
+ * @Description   enum for defining port default color
+ */
+typedef enum e_fm_port_color {
+	e_FM_PORT_COLOR_GREEN,	/**< Default port color is green */
+	e_FM_PORT_COLOR_YELLOW,	/**< Default port color is yellow */
+	e_FM_PORT_COLOR_RED,	/**< Default port color is red */
+	e_FM_PORT_COLOR_OVERRIDE/**< Ignore color */
+} e_fm_port_color;
+
+/*
+ * @Description   A structure for defining Dual Tx rate limiting scale
+ */
+typedef enum e_fm_port_dual_rate_limiter_scale_down {
+	e_FM_PORT_DUAL_RATE_LIMITER_NONE = 0,
+		/**< Use only single rate limiter*/
+	e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2,
+		/**< Divide high rate limiter by 2 */
+	e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4,
+		/**< Divide high rate limiter by 4 */
+	e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8
+		/**< Divide high rate limiter by 8 */
+} e_fm_port_dual_rate_limiter_scale_down;
+
+/*
+ * @Description   A structure for defining FM port resources
+ */
+typedef struct t_fm_port_rsrc {
+	uint32_t	num;
+			/**< Committed required resource */
+	uint32_t	extra;
+			/**< Extra (not committed) required resource */
+} t_fm_port_rsrc;
+
+/*
+ * @Description   A structure for defining Tx rate limiting
+ */
+typedef struct t_fm_port_rate_limit {
+	uint16_t		max_burst_size;
+				/**< in KBytes for Tx ports, in frames for OP
+				 * ports. (note that for early chips burst size
+				 * is rounded up to a multiply of 1000 frames).
+				 */
+	uint32_t		rate_limit;
+				/**< in Kb/sec for Tx ports, in frame/sec for OP
+				 * ports. Rate limit refers to data rate
+				 * (rather than line rate).
+				 */
+	e_fm_port_dual_rate_limiter_scale_down	rate_limit_divider;
+				/**< For OP ports only. Not-valid for some
+				 * earlier chip revisions
+				 */
+} t_fm_port_rate_limit;
+
+/*
+ * @Description   A structure for defining the parameters of
+ *		  the Rx port performance counters
+ */
+typedef struct t_fm_port_performance_cnt {
+	uint8_t	task_comp_val;
+		/**< Task compare value */
+	uint8_t	queue_comp_val;
+		/**< Rx queue/Tx confirm queue compare value (unused for H/O) */
+	uint8_t	dma_comp_val;
+		/**< Dma compare value */
+	uint32_t	fifo_comp_val;
+			/**< Fifo compare value (in bytes) */
+} t_fm_port_performance_cnt;
+
+/*
+ * @Function	  fm_port_config_num_of_open_dmas
+ *
+ * @Description   Calling this routine changes the max number of open DMA's
+ *		  available for this port. It changes this parameter in the
+ *		  internal driver data base from its default configuration
+ *		  [OP: 1]
+ *		  [1G-RX, 1G-TX: 1 (+1)]
+ *		  [10G-RX, 10G-TX: 8 (+8)]
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  p_open_dmas	A pointer to a structure of parameters defining
+ *				the open DMA allocation.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_num_of_open_dmas(t_handle h_fm_port,
+						t_fm_port_rsrc *p_open_dmas);
+
+/*
+ * @Function	  fm_port_config_num_of_tasks
+ *
+ * @Description   Calling this routine changes the max number of tasks available
+ *		  for this port. It changes this parameter in the internal
+ *		  driver data base from its default configuration
+ *		  [OP : 1]
+ *		  [1G - RX, 1G - TX : 3 ( + 2)]
+ *		  [10G - RX, 10G - TX : 16 ( + 8)]
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  p_num_of_tasks	A pointer to a structure of parameters
+ *					defining the tasks allocation.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_num_of_tasks(t_handle h_fm_port,
+					t_fm_port_rsrc *p_num_of_tasks);
+
+/*
+ * @Function	  fm_port_config_size_of_fifo
+ *
+ * @Description   Calling this routine changes the max FIFO size configured for
+ *		  this port.
+ *
+ *		  This function changes the internal driver data base from its
+ *		  default configuration. Please refer to the driver's User Guide
+ *		  for information on default FIFO sizes in the various devices.
+ *		  [OP: 2KB]
+ *		  [1G-RX, 1G-TX: 11KB]
+ *		  [10G-RX, 10G-TX: 12KB]
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  p_size_of_fifo	A pointer to a structure of parameters
+ *					defining the FIFO allocation.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_size_of_fifo(t_handle h_fm_port,
+					t_fm_port_rsrc *p_size_of_fifo);
+
+/*
+ * @Function	  fm_port_config_deq_high_priority
+ *
+ * @Description   Calling this routine changes the dequeue priority in the
+ *		  internal driver data base from its default configuration
+ *		  1G: [DEFAULT_PORT_deqHighPriority_1G]
+ *		  10G: [DEFAULT_PORT_deqHighPriority_10G]
+ *
+ *		  May be used for Non - Rx ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  high_pri	TRUE to select high priority, FALSE for normal
+ *				operation.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_deq_high_priority(t_handle h_fm_port, bool high_pri);
+
+/*
+ * @Function	  fm_port_config_deq_type
+ *
+ * @Description   Calling this routine changes the dequeue type parameter in the
+ *		  internal driver data base from its default configuration
+ *		  [DEFAULT_PORT_deq_type].
+ *
+ *		  May be used for Non - Rx ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  deq_type	According to QM definition.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_deq_type(t_handle h_fm_port,
+					e_fm_port_deq_type deq_type);
+
+/*
+ * @Function	  fm_port_config_deq_prefetch_option
+ *
+ * @Description   Calling this routine changes the dequeue prefetch option
+ *		  parameter in the internal driver data base from its default
+ *		  configuration [DEFAULT_PORT_deq_prefetch_option]
+ *		  Note: Available for some chips only
+ *
+ *		  May be used for Non - Rx ports only
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  deq_prefetch_option	New option
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_deq_prefetch_option(t_handle h_fm_port,
+			e_fm_port_deq_prefetch_option deq_prefetch_option);
+
+/*
+ * @Function	  fm_port_config_deq_byte_cnt
+ *
+ * @Description   Calling this routine changes the dequeue byte count parameter
+ *		  in the internal driver data base from its default
+ *		  configuration.
+ *		  1G:[DEFAULT_PORT_deq_byte_cnt_1G].
+ *		  10G:[DEFAULT_PORT_deq_byte_cnt_10G].
+ *
+ *		  May be used for Non - Rx ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  deq_byte_cnt	New byte count
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_deq_byte_cnt(t_handle h_fm_port,
+					uint16_t deq_byte_cnt);
+
+/*
+ * @Function	  fm_port_config_buffer_prefix_content
+ *
+ * @Description   Defines the structure, size and content of the application
+ *		  buffer. The prefix will In Tx ports, if 'pass_prs_result', the
+ *		  application should set a value to their offsets in the prefix
+ *		  of the FM will save the first 'priv_data_size', than,
+ *		  depending on 'pass_prs_result' and 'pass_time_stamp', copy
+ *		  parse result and timeStamp, and the packet itself (in this
+ *		  order), to the application buffer, and to offset.
+ *		  Calling this routine changes the buffer margins definitions in
+ *		  the internal driver data base from its default configuration:
+ *		  Data size:  [DEFAULT_PORT_bufferPrefixContent_priv_data_size]
+ *		  Pass Parser result:
+ *		  [DEFAULT_PORT_bufferPrefixContent_pass_prs_result].
+ *		  Pass timestamp:
+ *		  [DEFAULT_PORT_bufferPrefixContent_pass_time_stamp].
+ *
+ *		  May be used for all ports
+ *
+ *
+ * @Param[in]		h_fm_port			A handle to a FM Port
+ *							module.
+ * @Param[in,out]	p_fm_buffer_prefix_content	A structure of
+ *							parameters describing
+ *							the structure of the
+ *							buffer.
+ *							Out parameter: Start
+ *							margin - offset of data
+ *							from start of external
+ *							buffer.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_buffer_prefix_content(t_handle	h_fm_port,
+		t_fm_buffer_prefix_content	*p_fm_buffer_prefix_content);
+
+/*
+ * @Function	  fm_port_config_checksum_last_bytes_ignore
+ *
+ * @Description   Calling this routine changes the number of checksum bytes to
+ *		  ignore parameter in the internal driver data base from its
+ *		  default configuration.
+ *
+ *		  May be used by Tx & Rx ports only
+ *
+ * @Param[in]	  h_fm_port			A handle to a FM Port module.
+ * @Param[in]	  checksum_last_bytes_ignore	New value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_checksum_last_bytes_ignore(t_handle h_fm_port,
+			uint8_t checksum_last_bytes_ignore);
+
+/*
+ * @Function	  fm_port_config_cut_bytes_from_end
+ *
+ * @Description   Calling this routine changes the number of bytes to cut from a
+ *		  frame's end parameter in the internal driver data base
+ *		  from its default configuration
+ *		  [DEFAULT_PORT_cut_bytes_from_end]
+ *		  Note that if the result of (frame length before chop -
+ *		  cut_bytes_from_end) is less than 14 bytes, the chop operation
+ *		  is not executed.
+ *
+ *		  May be used for Rx ports only
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  cut_bytes_from_end	New value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_cut_bytes_from_end(t_handle h_fm_port,
+			uint8_t cut_bytes_from_end);
+
+/*
+ * @Function	  fm_port_config_ext_buf_pools
+ *
+ * @Description   This routine should be called for OP ports that internally use
+ *		  BM buffer pools. In such cases, e.g. for fragmentation and
+ *		  re-assembly, the FM needs new BM buffers. By calling this
+ *		  routine the user specifies the BM buffer pools that should be
+ *		  used.
+ *
+ *		  Note: Available for some chips only
+ *
+ *		  May be used for OP ports only
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  p_fm_ext_pools	A structure of parameters for the
+ *					external pools.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_ext_buf_pools(t_handle h_fm_port,
+			t_fm_ext_pools *p_fm_ext_pools);
+
+/*
+ * @Function	  fm_port_config_backup_pools
+ *
+ * @Description   Calling this routine allows the configuration of some of the
+ *		  BM pools defined for this port as backup pools.
+ *		  A pool configured to be a backup pool will be used only if all
+ *		  other enabled non - backup pools are depleted.
+ *
+ *		  May be used for Rx ports only
+ *
+ * @Param[in]	  h_fm_port			A handle to a FM Port module.
+ * @Param[in]	  p_fm_port_backup_bm_pools	An array of pool id's. All pools
+ *						specified here will be defined
+ *						as backup pools.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_backup_pools(t_handle h_fm_port,
+			t_fm_backup_bm_pools *p_fm_port_backup_bm_pools);
+
+/*
+ * @Function	  fm_port_config_frm_discard_override
+ *
+ * @Description   Calling this routine changes the error frames destination
+ *		  parameter in the internal driver data base from its default
+ *		  configuration: override =[DEFAULT_PORT_frmDiscardOverride]
+ *
+ *		  May be used for Rx and OP ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  override	TRUE to override discarding of error frames and
+ *				enqueueing them to error queue.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_frm_discard_override(t_handle h_fm_port,
+			bool override);
+
+/*
+ * @Function	fm_port_config_errors_to_discard
+ *
+ * @Description   Calling this routine changes the behaviour on error parameter
+ *		  in the internal driver data base from its default
+ *		  configuration: [DEFAULT_PORT_errorsToDiscard].
+ *		  If a requested error was previously defined as
+ *		  "ErrorsToEnqueue" it's definition will change and the frame
+ *		  will be discarded. Errors that were not defined either as
+ *		  "ErrorsToEnqueue" nor as "ErrorsToDiscard", will be forwarded
+ *		  to CPU.
+ *
+ *		  May be used for Rx and OP ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  errs		A list of errors to discard
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_errors_to_discard(t_handle h_fm_port,
+		fm_port_frame_err_select_t errs);
+
+/*
+ * @Function	  fm_port_config_dma_ic_cache_attr
+ *
+ * @Description   Calling this routine changes the internal context cache
+ *		  attribute parameter in the internal driver data base
+ *		  from its default configuration:
+ *		  [DEFAULT_PORT_dmaIntContextCacheAttr]
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port			A handle to a FM Port module.
+ * @Param[in]	  int_context_cache_attr	New selection
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_dma_ic_cache_attr(t_handle h_fm_port,
+		e_fm_dma_cache_option int_context_cache_attr);
+
+/*
+ * @Function	  fm_port_config_dma_hdr_attr
+ *
+ * @Description   Calling this routine changes the header cache attribute
+ *		  parameter in the internal driver data base from its default
+ *		  configuration[DEFAULT_PORT_dmaHeaderCacheAttr]
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  header_cache_attr	New selection
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_dma_hdr_attr(t_handle h_fm_port,
+		e_fm_dma_cache_option header_cache_attr);
+
+/*
+ * @Function	fm_port_config_dma_scatter_gather_attr
+ *
+ * @Description   Calling this routine changes the scatter gather cache
+ *		  attribute parameter in the internal driver data base from its
+ *		  default configuration[DEFAULT_PORT_dmaScatterGatherCacheAttr]
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port			A handle to a FM Port module.
+ * @Param[in]	  scatter_gather_cache_attr	New selection
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_dma_scatter_gather_attr(t_handle h_fm_port,
+		e_fm_dma_cache_option scatter_gather_cache_attr);
+
+/*
+ * @Function	  fm_port_config_dma_write_optimize
+ *
+ * @Description   Calling this routine changes the write optimization parameter
+ *		  in the internal driver data base from its default
+ *		  configuration : By default optimize =
+ *		  [DEFAULT_PORT_dmaWriteOptimize].
+ *		  Note:
+ *		  1. For head optimization, data alignment must be >= 16
+ *		     (supported by default).
+ *
+ *		  2. For tail optimization, note that the optimization is
+ *		     performed by extending the write transaction of the frame
+ *		     payload at the tail as needed to achieve optimal bus
+ *		     transfers, so that the last write is extended to be on
+ *		     16 / 64 bytes aligned block (chip dependent).
+ *
+ *		  Relevant for non - Tx port types
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  optimize	TRUE to enable optimization, FALSE for normal
+ *				operation
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_dma_write_optimize(t_handle h_fm_port,
+						bool optimize);
+
+/*
+ * @Function	  fm_port_config_no_scather_gather
+ *
+ * @Description   Calling this routine changes the no_scather_gather parameter
+ *		  in internal driver data base from its default configuration.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  no_scather_gather	TRUE - frame is discarded if can not be
+ *					stored in single buffer,
+ *					FALSE - frame can be stored in scatter
+ *					gather (S / G) format.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_no_scather_gather(t_handle h_fm_port,
+						bool no_scather_gather);
+
+/*
+ * @Function	  fm_port_config_dflt_color
+ *
+ * @Description   Calling this routine changes the internal default color
+ *		  parameter in the internal driver data base
+ *		  from its default configuration[DEFAULT_PORT_color]
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  color		New selection
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_dflt_color(t_handle h_fm_port, e_fm_port_color color);
+
+/*
+ * @Function	  fm_port_config_sync_req
+ *
+ * @Description   Calling this routine changes the synchronization attribute
+ *		  parameter in the internal driver data base from its default
+ *		  configuration: sync_req =[DEFAULT_PORT_sync_req]
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  sync_req	TRUE to request synchronization, FALSE
+ *				otherwise.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_sync_req(t_handle h_fm_port, bool sync_req);
+
+/*
+ * @Function	  fm_port_config_forward_reuse_int_context
+ *
+ * @Description   This routine is relevant for Rx ports that are routed to OP
+ *		  port. It changes the internal context reuse option in the
+ *		  internal driver data base from its default configuration:
+ *		  reuse =[DEFAULT_PORT_forwardIntContextReuse]
+ *
+ *		  May be used for Rx ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  reuse		TRUE to reuse internal context on frames
+ *				forwarded to OP port.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_forward_reuse_int_context(t_handle h_fm_port,
+						bool reuse);
+
+/*
+ * @Function	  fm_port_config_donot_release_tx_buf_to_bm
+ *
+ * @Description   This routine should be called if no Tx confirmation
+ *		  is done, and yet buffers should not be released to the BM.
+ *
+ *		  Normally, buffers are returned using the Tx confirmation
+ *		  process. When Tx confirmation is not used (defFqid = 0),
+ *		  buffers are typically released to the BM. This routine
+ *		  may be called to avoid this behavior and not release the
+ *		  buffers.
+ *
+ *		  May be used for Tx ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_donot_release_tx_buf_to_bm(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_config_immax_rx_buf_length
+ *
+ * @Description   Changes the maximum receive buffer length from its default
+ *		  configuration: Closest rounded down power of 2 value of the
+ *		  data buffer size.
+ *
+ *		  The maximum receive buffer length directly affects the
+ *		  structure of received frames (single- or multi-buffered) and
+ *		  the performance of both the FM and the driver.
+ *
+ *		  The selection between single- or multi-buffered frames should
+ *		  be done according to the characteristics of the specific
+ *		  application. The recommended mode is to use a single data
+ *		  buffer per packet, as this mode provides the best performance.
+ *		  However, the user can select to use multiple data buffers per
+ *		  packet.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  new_val	Maximum receive buffer length (in bytes).
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init(). This routine is to be used only if
+ *		  Independent-Mode is enabled.
+ */
+uint32_t fm_port_config_immax_rx_buf_length(t_handle h_fm_port,
+						uint16_t new_val);
+
+/*
+ * @Function	  fm_port_config_imrx_bd_ring_length
+ *
+ * @Description   Changes the receive BD ring length from its default
+ *		  configuration:[DEFAULT_PORT_rxBdRingLength]
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  new_val	The desired BD ring length.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init(). This routine is to be used only if
+ *		  Independent-Mode is enabled.
+ */
+uint32_t fm_port_config_imrx_bd_ring_length(t_handle h_fm_port,
+						uint16_t new_val);
+
+/*
+ * @Function	fm_port_config_imtx_bd_ring_length
+ *
+ * @Description   Changes the transmit BD ring length from its default
+ *		  configuration:[DEFAULT_PORT_txBdRingLength]
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  new_val	The desired BD ring length.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init(). This routine is to be used only if
+ *		  Independent-Mode is enabled.
+ */
+uint32_t fm_port_config_imtx_bd_ring_length(t_handle h_fm_port,
+					uint16_t new_val);
+
+/*
+ * @Function	  fm_port_config_imfman_ctrl_external_structs_memory
+ *
+ * @Description   Configures memory partition and attributes for FMan-Controller
+ *		  data structures (e.g. BD rings).
+ *		  Calling this routine changes the internal driver data base
+ *		  from its default configuration
+ *		  [DEFAULT_PORT_ImfwExtStructsMemId,
+ *		  DEFAULT_PORT_ImfwExtStructsMemAttr].
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  mem_id		Memory partition ID.
+ * @Param[in]	  mem_attributes	Memory attributes mask (a combination of
+ *					MEMORY_ATTR_x flags).
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ */
+uint32_t  fm_port_config_imfman_ctrl_external_structs_memory(t_handle h_fm_port,
+				uint8_t mem_id,
+				uint32_t mem_attributes);
+
+/*
+ * @Function	  fm_port_config_impolling
+ *
+ * @Description   Changes the Rx flow from interrupt driven (default) to
+ *		  polling.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ *		  This routine is to be used only if Independent-Mode is
+ *		  enabled.
+ */
+uint32_t fm_port_config_impolling(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_config_max_frame_length
+ *
+ * @Description   Changes the definition of the max size of frame that should be
+ *		  transmitted/received on this port from its default value
+ *		  [DEFAULT_PORT_maxFrameLength].
+ *		  This parameter is used for confirmation of the minimum Fifo
+ *		  size calculations and only for Tx ports or ports working in
+ *		  independent mode. This should be larger than the maximum
+ *		  possible MTU that will be used for this port (i.e. its MAC).
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  length	Max size of frame
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init(). This routine is to be used only if
+ *		  Independent-Mode is enabled.
+ */
+uint32_t fm_port_config_max_frame_length(t_handle h_fm_port,
+					uint16_t length);
+
+/*
+ * @Function	  fm_port_config_tx_fifo_min_fill_level
+ *
+ * @Description   Calling this routine changes the fifo minimum fill level
+ *		  parameter in the internal driver data base from its default
+ *		  configuration[DEFAULT_PORT_txFifoMinFillLevel]
+ *
+ *		  May be used for Tx ports only
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  min_fill_level	New value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_tx_fifo_min_fill_level(t_handle h_fm_port,
+					uint32_t min_fill_level);
+
+/*
+ * @Function	  fm_port_config_fifo_deq_pipeline_depth
+ *
+ * @Description   Calling this routine changes the fifo dequeue pipeline depth
+ *		  parameter in the internal driver data base
+ *
+ *		  from its default configuration :
+ *		  1G ports : [DEFAULT_PORT_fifoDeqPipelineDepth_1G],
+ *		  10G port : [DEFAULT_PORT_fifoDeqPipelineDepth_10G],
+ *		  OP port : [DEFAULT_PORT_fifoDeqPipelineDepth_OH]
+ *
+ *		  May be used for Tx / OP ports only
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  deq_pipeline_depth	New value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_fifo_deq_pipeline_depth(t_handle h_fm_port,
+				uint8_t deq_pipeline_depth);
+
+/*
+ * @Function	  fm_port_config_tx_fifo_low_comf_level
+ *
+ * @Description   Calling this routine changes the fifo low comfort level
+ *		  parameter in internal driver data base from its default
+ *		  configuration[DEFAULT_PORT_txFifoLowComfLevel]
+ *
+ *		  May be used for Tx ports only
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  fifo_low_comf_level	New value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_tx_fifo_low_comf_level(t_handle h_fm_port,
+					uint32_t fifo_low_comf_level);
+
+/*
+ * @Function	  fm_port_config_rx_fifo_threshold
+ *
+ * @Description   Calling this routine changes the threshold of the FIFO fill
+ *		  level parameter in the internal driver data base from its
+ *		  default configuration[DEFAULT_PORT_rxFifoThreshold]
+ *
+ *		  If the total number of buffers which are currently in use and
+ *		  associated with the specific RX port exceed this threshold,
+ *		  the BMI will signal the MAC to send a pause frame over the
+ *		  link.
+ *
+ *		  May be used for Rx ports only
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  fifo_threshold	New value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_rx_fifo_threshold(t_handle h_fm_port,
+						uint32_t fifo_threshold);
+
+/*
+ * @Function	  fm_port_config_rx_fifo_pri_elevation_level
+ *
+ * @Description   Calling this routine changes the priority elevation level
+ *		  parameter in the internal driver data base from its default
+ *		  configuration[DEFAULT_PORT_rxFifoPriElevationLevel]
+ *
+ *		  If the total number of buffers which are currently in use and
+ *		  associated with the specific RX port exceed the amount
+ *		  specified in pri_elevation_level, BMI will signal the main
+ *		  FM's DMA to elevate the FM priority on the system bus.
+ *
+ *		  May be used for Rx ports only
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  pri_elevation_level   New value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_rx_fifo_pri_elevation_level(t_handle h_fm_port,
+						uint32_t pri_elevation_level);
+
+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
+/*
+ * @Function	  fm_port_config_bcbworkaround
+ *
+ * @Description   Configures BCB errata workaround.
+ *
+ *		  When BCB errata is applicable, the workaround is always
+ *		  performed by FM Controller. Thus, this functions doesn't
+ *		  actually enable errata workaround but rather allows driver to
+ *		  perform adjustments required due to errata workaround
+ *		  execution in FM controller.
+ *
+ *		  Applying BCB workaround also configures
+ *		  FM_PORT_FRM_ERR_PHYSICAL errors to be discarded. Thus
+ *		  FM_PORT_FRM_ERR_PHYSICAL can't be set by
+ *		  fm_port_set_errors_route() function.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_bcbworkaround(t_handle h_fm_port);
+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
+
+/*
+ * @Function	  fm_port_config_internal_buff_offset
+ *
+ * @Description   Configures internal buffer offset.
+ *
+ *		  May be used for Rx and OP ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  val		New value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_config_internal_buff_offset(t_handle h_fm_port, uint8_t val);
+
+/** @} */ /* end of FM_PORT_advanced_init_grp group */
+/** @} */ /* end of FM_PORT_init_grp group */
+
+/*
+ * @Group	  FM_PORT_runtime_control_grp FM Port Runtime Control Unit
+ *
+ * @Description   FM Port Runtime control unit API functions, definitions and
+ *		  enums.
+ *
+ * @{
+ */
+
+/*
+ * @Description   enum for defining FM Port counters
+ */
+typedef enum e_fm_port_counters {
+	e_FM_PORT_COUNTERS_CYCLE,		/**< BMI performance counter */
+	e_FM_PORT_COUNTERS_TASK_UTIL,		/**< BMI performance counter */
+	e_FM_PORT_COUNTERS_QUEUE_UTIL,		/**< BMI performance counter */
+	e_FM_PORT_COUNTERS_DMA_UTIL,		/**< BMI performance counter */
+	e_FM_PORT_COUNTERS_FIFO_UTIL,		/**< BMI performance counter */
+	e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION,
+			/**< BMI Rx only performance counter */
+	e_FM_PORT_COUNTERS_FRAME,		/**< BMI statistics counter */
+	e_FM_PORT_COUNTERS_DISCARD_FRAME,	/**< BMI statistics counter */
+	e_FM_PORT_COUNTERS_DEALLOC_BUF,
+			/**< BMI deallocate buffer statistics counter */
+	e_FM_PORT_COUNTERS_RX_BAD_FRAME,
+			/**< BMI Rx only statistics counter */
+	e_FM_PORT_COUNTERS_RX_LARGE_FRAME,
+			/**< BMI Rx only statistics counter */
+	e_FM_PORT_COUNTERS_RX_FILTER_FRAME,
+			/**< BMI Rx & OP only statistics counter */
+	e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR,
+			/**< BMI Rx, OP & HC only statistics counter */
+	e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD,
+			/**< BMI Rx, OP & HC statistics counter */
+	e_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER,
+			/**< BMI Rx, OP & HC only statistics counter */
+	e_FM_PORT_COUNTERS_WRED_DISCARD,
+			/**< BMI OP & HC only statistics counter */
+	e_FM_PORT_COUNTERS_LENGTH_ERR,
+			/**< BMI non-Rx statistics counter */
+	e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT,
+			/**< BMI non-Rx statistics counter */
+	e_FM_PORT_COUNTERS_DEQ_TOTAL,	/**< QMI total QM dequeues counter */
+	e_FM_PORT_COUNTERS_ENQ_TOTAL,	/**< QMI total QM enqueues counter */
+	e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT,	/**< QMI counter */
+	e_FM_PORT_COUNTERS_DEQ_CONFIRM		/**< QMI counter */
+} e_fm_port_counters;
+
+typedef struct t_fm_port_bmi_stats {
+	uint32_t cnt_cycle;
+	uint32_t cnt_task_util;
+	uint32_t cnt_queue_util;
+	uint32_t cnt_dma_util;
+	uint32_t cnt_fifo_util;
+	uint32_t cnt_rx_pause_activation;
+	uint32_t cnt_frame;
+	uint32_t cnt_discard_frame;
+	uint32_t cnt_dealloc_buf;
+	uint32_t cnt_rx_bad_frame;
+	uint32_t cnt_rx_large_frame;
+	uint32_t cnt_rx_filter_frame;
+	uint32_t cnt_rx_list_dma_err;
+	uint32_t cnt_rx_out_of_buffers_discard;
+	uint32_t cnt_wred_discard;
+	uint32_t cnt_length_err;
+	uint32_t cnt_unsupported_format;
+} t_fm_port_bmi_stats;
+
+/*
+ * @Description   Structure for Port id parameters.
+ *		  Fields commented 'IN' are passed by the port module to be used
+ *		  by the FM module.
+ *		  Fields commented 'OUT' will be filled by FM before returning
+ *		  to port.
+ */
+typedef struct t_fm_port_congestion_grps {
+	uint16_t	num_of_congestion_grps_to_consider;
+			/**< The number of required CGs to define the size of
+			 * the following array
+			 */
+	uint8_t	congestion_grps_to_consider[FM_NUM_CONG_GRPS];
+			/**< An array of CG indexes; Note that the size of the
+			 * array should be 'num_of_congestion_grps_to_consider'.
+			 */
+	bool	pfc_prio_enable[FM_NUM_CONG_GRPS][FM_MAX_PFC_PRIO];
+			/**< a matrix that represents the map between the CG ids
+			 * defined in 'congestion_grps_to_consider' to the
+			 * priorties mapping array.
+			 */
+} t_fm_port_congestion_grps;
+
+
+#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
+/*
+ * @Function	  fm_port_dump_regs
+ *
+ * @Description   Dump all regs.
+ *
+ *		  Calling this routine invalidates the descriptor.
+ *
+ * @Param[in]	  h_fm_port	FM PORT module descriptor
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_dump_regs(t_handle h_fm_port);
+#endif /* (defined(DEBUG_ERRORS) && ... */
+
+/*
+ * @Function	  fm_port_get_buffer_data_offset
+ *
+ * @Description   Relevant for Rx ports. Returns the data offset from the
+ *		  beginning of the data buffer
+ *
+ * @Param[in]	  h_fm_port	FM PORT module descriptor
+ *
+ * @Return	  data offset.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_get_buffer_data_offset(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_get_buffer_icinfo
+ *
+ * @Description   Returns the Internal Context offset from the beginning of the
+ *		  data buffer
+ *
+ * @Param[in]	  h_fm_port	FM PORT module descriptor
+ * @Param[in]	  p_data	A pointer to the data buffer.
+ *
+ * @Return	  Internal context info pointer on success, NULL if
+ *		  'allOtherInfo' was not configured for this port.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint8_t *fm_port_get_buffer_icinfo(t_handle h_fm_port, char *p_data);
+
+/*
+ * @Function	  fm_port_get_buffer_prs_result
+ *
+ * @Description   Returns the pointer to the parse result in the data buffer.
+ *		  In Rx ports this is relevant after reception, if parse result
+ *		  is configured to be part of the data passed to the
+ *		  application. For non Rx ports it may be used to get the
+ *		  pointer of the area in the buffer where parse result should be
+ *		  initialized - if so configured.
+ *		  See fm_port_config_buffer_prefix_content for data buffer
+ *		  prefix configuration.
+ *
+ * @Param[in]	  h_fm_port	FM PORT module descriptor
+ * @Param[in]	  p_data	A pointer to the data buffer.
+ *
+ * @Return	  Parse result pointer on success, NULL if parse result was not
+ *		  configured for this port.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+t_fm_prs_result *fm_port_get_buffer_prs_result(t_handle h_fm_port,
+						char *p_data);
+
+/*
+ * @Function	  fm_port_get_buffer_time_stamp
+ *
+ * @Description   Returns the time stamp in the data buffer.
+ *		  Relevant for Rx ports for getting the buffer time stamp.
+ *		  See fm_port_config_buffer_prefix_content for data buffer
+ *		  prefix configuration.
+ *
+ * @Param[in]	  h_fm_port	FM PORT module descriptor
+ * @Param[in]	  p_data	A pointer to the data buffer.
+ *
+ * @Return	  A pointer to the hash result on success, NULL otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint64_t *fm_port_get_buffer_time_stamp(t_handle h_fm_port, char *p_data);
+
+/*
+ * @Function	  fm_port_get_buffer_hash_result
+ *
+ * @Description   Given a data buffer, on the condition that hash result was
+ *		  defined as a part of the buffer content(see
+ *		  fm_port_config_buffer_prefix_content) this routine will return
+ *		  the pointer to the hash result location in the buffer prefix.
+ *
+ * @Param[in]	  h_fm_port	FM PORT module descriptor
+ * @Param[in]	  p_data	A pointer to the data buffer.
+ *
+ * @Return	  A pointer to the hash result on success, NULL otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint8_t *fm_port_get_buffer_hash_result(t_handle h_fm_port, char *p_data);
+
+/*
+ * @Function	  fm_port_disable
+ *
+ * @Description   Gracefully disable an FM port. The port will not start new
+ *		  tasks after all tasks associated with the port are terminated.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ *		  This is a blocking routine, it returns after port is
+ *		  gracefully stopped, i.e. the port will not except new frames,
+ *		  but it will finish all frames or tasks which were already
+ *		  began
+ */
+uint32_t fm_port_disable(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_enable
+ *
+ * @Description   A runtime routine provided to allow disable/enable of port.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	 Allowed only following fm_port_init().
+ */
+uint32_t fm_port_enable(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_set_rate_limit
+ *
+ * @Description   Calling this routine enables rate limit algorithm.
+ *		  By default, this functionality is disabled.
+ *
+ *		  Note that rate - limit mechanism uses the FM time stamp.
+ *		  The selected rate limit specified here would be
+ *		  rounded DOWN to the nearest 16M.
+ *
+ *		  May be used for Tx and OP ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  p_rate_limit	A structure of rate limit parameters
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init(). If rate limit is set
+ *		  on a port that need to send PFC frames, it might violate the
+ *		  stop transmit timing.
+ */
+uint32_t fm_port_set_rate_limit(t_handle h_fm_port,
+				t_fm_port_rate_limit *p_rate_limit);
+
+/*
+ * @Function	  fm_port_delete_rate_limit
+ *
+ * @Description   Calling this routine disables and clears rate limit
+ *		  initialization.
+ *
+ *		  May be used for Tx and OP ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_delete_rate_limit(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_set_pfc_priorities_mapping_to_qman_wq
+
+ * @Description   Calling this routine maps each PFC received priority to the
+ *		  transmit WQ. This WQ will be blocked upon receiving a PFC
+ *		  frame with this priority.
+ *
+ *		  May be used for Tx ports only.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  prio		PFC priority (0 - 7).
+ * @Param[in]	  wq		Work Queue (0 - 7).
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_pfc_priorities_mapping_to_qman_wq(t_handle h_fm_port,
+						uint8_t prio, uint8_t wq);
+
+/*
+ * @Function	  fm_port_set_statistics_counters
+ *
+ * @Description   Calling this routine enables/disables port's statistics
+ *		  counters. By default, counters are enabled.
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  enable	TRUE to enable, FALSE to disable.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_statistics_counters(t_handle h_fm_port, bool enable);
+
+/*
+ * @Function	  fm_port_set_frame_queue_counters
+ *
+ * @Description   Calling this routine enables/disables port's enqueue/dequeue
+ *		  counters. By default, counters are enabled.
+ *
+ *		  May be used for all ports
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  enable	TRUE to enable, FALSE to disable.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_frame_queue_counters(t_handle h_fm_port,
+						bool enable);
+
+/*
+ * @Function	  fm_port_analyze_performance_params
+ *
+ * @Description   User may call this routine to so the driver will analyze if
+ *		  the basic performance parameters are correct and also the
+ *		  driver may suggest of improvements; The basic parameters are
+ *		  FIFO sizes, number of DMAs and number of TNUMs for the port.
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_analyze_performance_params(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_set_alloc_buf_counter
+ *
+ * @Description   Calling this routine enables/disables BM pool allocate
+ *		  buffer counters.
+ *		  By default, counters are enabled.
+ *
+ *		  May be used for Rx ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  pool_id	BM pool id.
+ * @Param[in]	  enable	TRUE to enable, FALSE to disable.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_alloc_buf_counter(t_handle h_fm_port,
+						uint8_t pool_id, bool enable);
+
+/*
+ * @Function	fm_port_get_bmi_counters
+ *
+ * @Description   Read port's BMI stat counters and place them into
+ *		  a designated structure of counters.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[out]	  p_bmi_stats	counters structure
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_get_bmi_counters(t_handle h_fm_port,
+					t_fm_port_bmi_stats *p_bmi_stats);
+
+/*
+ * @Function	  fm_port_get_counter
+ *
+ * @Description   Reads one of the FM PORT counters.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  fm_port_counter	The requested counter.
+ *
+ * @Return	  Counter's current value.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ *		  Note that it is user's responsibility to call this routine
+ *		  only for enabled counters, and there will be no indication if
+ *		  a disabled counter is accessed.
+ */
+uint32_t fm_port_get_counter(t_handle h_fm_port,
+		e_fm_port_counters fm_port_counter);
+
+/*
+ * @Function	  fm_port_modify_counter
+ *
+ * @Description   Sets a value to an enabled counter. Use "0" to reset the
+ *		  counter.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  fm_port_counter	The requested counter.
+ * @Param[in]	  value			The requested value to be written into
+ *					the counter.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_modify_counter(t_handle h_fm_port,
+		e_fm_port_counters fm_port_counter, uint32_t value);
+
+/*
+ * @Function	  fm_port_get_alloc_buf_counter
+ *
+ * @Description   Reads one of the FM PORT buffer counters.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  pool_id		The requested pool.
+ *
+ * @Return	  Counter's current value.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ *		  Note that it is user's responsibility to call this routine
+ *		  only for enabled counters, and there will be no indication if
+ *		  a disabled counter is accessed.
+ */
+uint32_t fm_port_get_alloc_buf_counter(t_handle h_fm_port,
+			uint8_t pool_id);
+
+/*
+ * @Function	  fm_port_modify_alloc_buf_counter
+ *
+ * @Description   Sets a value to an enabled counter. Use "0" to reset the
+ *		  counter.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  pool_id	The requested pool.
+ * @Param[in]	  value		The requested value to be written into the
+ *				counter.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_modify_alloc_buf_counter(t_handle h_fm_port,
+			uint8_t pool_id, uint32_t value);
+
+/*
+ * @Function	fm_port_add_congestion_grps
+ *
+ * @Description   This routine effects the corresponding Tx port.
+ *		  It should be called in order to enable pause
+ *		  frame transmission in case of congestion in one or more
+ *		  of the congestion groups relevant to this port.
+ *		  Each call to this routine may add one or more congestion
+ *		  groups to be considered relevant to this port.
+ *
+ *		  May be used for Rx, or RX + OP ports only (depending on chip)
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  p_congestion_grps	A pointer to an array of congestion
+ *					groups id's to consider.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_add_congestion_grps(t_handle h_fm_port,
+			t_fm_port_congestion_grps *p_congestion_grps);
+
+/*
+ * @Function	  fm_port_remove_congestion_grps
+ *
+ * @Description   This routine effects the corresponding Tx port. It should be
+ *		  called when congestion groups were defined for this port and
+ *		  are no longer relevant, or pause frames transmitting is not
+ *		  required on their behalf.
+ *		  Each call to this routine may remove one or more congestion
+ *		  groups to be considered relevant to this port.
+ *
+ *		  May be used for Rx, or RX + OP ports only (depending on chip)
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  p_congestion_grps	A pointer to an array of congestion
+ *					groups id's to consider.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_remove_congestion_grps(t_handle h_fm_port,
+			t_fm_port_congestion_grps *p_congestion_grps);
+
+/*
+ * @Function	  fm_port_is_stalled
+ *
+ * @Description   A routine for checking whether the specified port is stalled.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  TRUE if port is stalled, FALSE otherwise
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+bool fm_port_is_stalled(t_handle h_fm_port);
+
+/*
+ * @Function	fm_port_release_stalled
+ *
+ * @Description   This routine may be called in case the port was stalled and
+ *		  may now be released.
+ *		  Note that this routine is available only on older FMan
+ *		  revisions (FMan v2, DPAA v1.0 only).
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_release_stalled(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_set_rx_l4checksum_verify
+ *
+ * @Description   This routine is relevant for Rx ports (1G and 10G). The
+ *		  routine set / clear the L3 / L4 checksum verification (on RX
+ *		  side). Note that this takes affect only if hw - parser is
+ *		  enabled !
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  l_4checksum	boolean indicates whether to do L3/L4 checksum
+ *				on frames or not.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_rx_l4checksum_verify(t_handle h_fm_port,
+			bool l_4checksum);
+
+/*
+ * @Function	  fm_port_set_errors_route
+ *
+ * @Description   Errors selected for this routine will cause a frame with that
+ *		  error to be enqueued to error queue.
+ *		  Errors not selected for this routine will cause a frame with
+ *		  that error to be enqueued to the one of the other port queues.
+ *		  By default all errors are defined to be enqueued to error
+ *		  queue. Errors that were configured to be discarded(at
+ *		  initialization) may not be selected here.
+ *
+ *		  May be used for Rx and OP ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  errs		A list of errors to enqueue to error queue
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_config() and before
+ *		  fm_port_init().
+ */
+uint32_t fm_port_set_errors_route(t_handle h_fm_port,
+				fm_port_frame_err_select_t errs);
+
+/*
+ * @Function	  fm_port_set_imexceptions
+ *
+ * @Description   Calling this routine enables/disables FM PORT interrupts.
+ *
+ * @Param[in]	  h_fm_port	FM PORT module descriptor.
+ * @Param[in]	  exception	The exception to be selected.
+ * @Param[in]	  enable	TRUE to enable interrupt, FALSE to mask it.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ *		  This routine should NOT be called from guest-partition
+ *		  (i.e. guestId != NCSW_PRIMARY_ID)
+ */
+uint32_t fm_port_set_imexceptions(t_handle h_fm_port,
+				e_fm_port_exceptions exception, bool enable);
+
+/*
+ * @Function	  fm_port_set_performance_counters
+ *
+ * @Description   Calling this routine enables/disables port's performance
+ *		  counters. By default, counters are enabled.
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  enable		TRUE to enable, FALSE to disable.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_performance_counters(t_handle h_fm_port,
+						bool enable);
+
+/*
+ * @Function	  fm_port_set_performance_counters_params
+ *
+ * @Description   Calling this routine defines port's performance counters
+ *		  parameters.
+ *
+ *		  May be used for all port types
+ *
+ * @Param[in]	  h_fm_port			A handle to a FM Port module.
+ * @Param[in]	  p_fm_port_performance_cnt	A pointer to a structure of
+ *						performance counters parameters.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_performance_counters_params(t_handle h_fm_port,
+			t_fm_port_performance_cnt *p_fm_port_performance_cnt);
+
+/*
+ * @Group	  FM_PORT_pcd_runtime_control_grp
+ *		  FM Port PCD Runtime Control Unit
+ *
+ * @Description   FM Port PCD Runtime control unit API functions, definitions
+ *		  and enums.
+ *
+ * @Function	  fm_port_set_pcd
+ *
+ * @Description   Calling this routine defines the port's PCD configuration. It
+ *		  changes it from its default configuration which is PCD
+ *		  disabled (BMI to BMI) and configures it according to the
+ *		  passed parameters.
+ *
+ *		  May be used for Rx and OP ports only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  p_fm_port_pcd	A Structure of parameters defining the port's
+ *				PCD configuration.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_set_pcd(t_handle h_fm_port,
+			ioc_fm_port_pcd_params_t *p_fm_port_pcd);
+
+/*
+ * @Function	  fm_port_delete_pcd
+ *
+ * @Description   Calling this routine releases the port's PCD configuration.
+ *		  The port returns to its default configuration which is PCD
+ *		  disabled (BMI to BMI) and all PCD configuration is removed.
+ *
+ *		  May be used for Rx and OP ports which are in PCD mode only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_delete_pcd(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_attach_pcd
+ *
+ * @Description   This routine may be called after fm_port_detach_pcd was
+ *		  called, to return to the originally configured PCD support
+ *		  flow. The couple of routines are used to allow PCD
+ *		  configuration changes that demand that PCD will not be used
+ *		  while changes take place.
+ *
+ *		  May be used for Rx and OP ports which are in PCD mode only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init().
+ */
+uint32_t fm_port_attach_pcd(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_detach_pcd
+ *
+ * @Description   Calling this routine detaches the port from its PCD
+ *		  functionality. The port returns to its default flow which is
+ *		  BMI to BMI.
+ *
+ *		  May be used for Rx and OP ports which are in PCD mode only
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_attach_pcd().
+ */
+uint32_t fm_port_detach_pcd(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_pcd_plcr_alloc_profiles
+ *
+ * @Description   This routine may be called only for ports that use the Policer
+ *		  in order to allocate private policer profiles.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  num_of_profiles	The number of required policer profiles
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init() and fm_pcd_init(), and
+ *		  before fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_plcr_alloc_profiles(t_handle h_fm_port,
+			uint16_t num_of_profiles);
+
+/*
+ * @Function	  fm_port_pcd_plcr_free_profiles
+ *
+ * @Description   This routine should be called for freeing private policer
+ *		  profiles.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init() and fm_pcd_init(), and
+ *		  before fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_plcr_free_profiles(t_handle h_fm_port);
+
+/*
+ * @Function	  fm_port_pcd_kg_modify_initial_scheme
+ *
+ * @Description   This routine may be called only for ports that use the keygen
+ *		  in order to change the initial scheme frame should be routed
+ *		  to. The change may be of a scheme id(in case of direct mode),
+ *		  from direct to indirect, or from indirect to direct -
+ *		  specifying the scheme id.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  p_fm_pcd_kg_scheme	A structure of parameters for defining
+ *					whether a scheme is direct / indirect,
+ *					and if direct - scheme id.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init() and fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_kg_modify_initial_scheme(t_handle h_fm_port,
+		ioc_fm_pcd_kg_scheme_select_t *p_fm_pcd_kg_scheme);
+
+/*
+ * @Function	  fm_port_pcd_plcr_modify_initial_profile
+ *
+ * @Description   This routine may be called for ports with flows
+ *		  e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or
+ *		  e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR only, to change the initial
+ *		  Policer profile frame should be routed to. The change may be
+ *		  of a profile and / or absolute / direct mode selection.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  h_profile		Policer profile handle
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init() and fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_plcr_modify_initial_profile(t_handle h_fm_port,
+						t_handle h_profile);
+
+/*
+ * @Function	  fm_port_pcd_cc_modify_tree
+ *
+ * @Description   This routine may be called for ports that use coarse
+ *		  classification tree if the user wishes to replace the tree.
+ *		  The routine may not be called while port receives packets
+ *		  using the PCD functionalities, therefore port must be first
+ *		  detached from the PCD, only than the routine may be called,
+ *		  and than port be attached to PCD again.
+ *
+ * @Param[in]	  h_fm_port	A handle to a FM Port module.
+ * @Param[in]	  h_cc_tree	A CC tree that was already built. The tree id as
+ *				returned from the BuildTree routine.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init(), fm_port_set_pcd() and
+ *		  fm_port_detach_pcd()
+ */
+uint32_t fm_port_pcd_cc_modify_tree(t_handle h_fm_port, t_handle h_cc_tree);
+
+/*
+ * @Function	  fm_port_pcd_kg_bind_schemes
+ *
+ * @Description   These routines may be called for adding more schemes for the
+ *		  port to be bound to. The selected schemes are not added, just
+ *		  this specific port starts using them.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  p_port_scheme		A structure defining the list of schemes
+ *					to be added.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init() and fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_kg_bind_schemes(t_handle h_fm_port,
+			ioc_fm_pcd_port_schemes_params_t *p_port_scheme);
+
+/*
+ * @Function	  fm_port_pcd_kg_unbind_schemes
+ *
+ * @Description   These routines may be called for adding more schemes for the
+ *		  port to be bound to. The selected schemes are not removed or
+ *		  invalidated, just this specific port stops using them.
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[in]	  p_port_scheme		A structure defining the list of schemes
+ *					to be added.
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init() and fm_port_set_pcd().
+ */
+uint32_t fm_port_pcd_kg_unbind_schemes(t_handle h_fm_port,
+			ioc_fm_pcd_port_schemes_params_t *p_port_scheme);
+
+/*
+ * @Function	  fm_port_get_ipv_4options_count
+ *
+ * @Description   TODO
+ *
+ * @Param[in]	  h_fm_port		A handle to a FM Port module.
+ * @Param[out]	  p_ipv_4options_count  will hold the counter value
+ *
+ * @Return	  E_OK on success; Error code otherwise.
+ *
+ * @Cautions	  Allowed only following fm_port_init()
+ */
+uint32_t fm_port_get_ipv_4options_count(t_handle h_fm_port,
+				uint32_t *p_ipv_4options_count);
+
+/** @} */ /* end of FM_PORT_pcd_runtime_control_grp group */
+/** @} */ /* end of FM_PORT_runtime_control_grp group */
+/** @} */ /* end of FM_PORT_grp group */
+/** @} */ /* end of FM_grp group */
+#endif /* __FM_PORT_EXT_H */
diff --git a/drivers/net/dpaa/fmlib/ncsw_ext.h b/drivers/net/dpaa/fmlib/ncsw_ext.h
new file mode 100644
index 000000000..ae5f0c884
--- /dev/null
+++ b/drivers/net/dpaa/fmlib/ncsw_ext.h
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+#ifndef __NCSW_EXT_H
+#define __NCSW_EXT_H
+
+#include <stdint.h>
+
+#define PTR_TO_UINT(_ptr)	((uintptr_t)(_ptr))
+#define UINT_TO_PTR(_val)	((void *)(uintptr_t)(_val))
+
+/* phys_address_t should be uintptr_t */
+typedef uint64_t phys_address_t;
+
+/*
+ * @Description   Possible RxStore callback responses.
+ */
+typedef enum e_rx_store_response {
+	e_RX_STORE_RESPONSE_PAUSE
+		/**< Pause invoking callback with received data; in polling
+		 * mode, start again invoking callback only next time user
+		 * invokes the receive routine; in interrupt mode, start again
+		 * invoking callback only next time a receive event triggers an
+		 * interrupt; in all cases, received data that are pending are
+		 * not lost, rather, their processing is temporarily deferred;
+		 * in all cases, received data are processed in the order in
+		 * which they were received.
+		 */
+	, e_RX_STORE_RESPONSE_CONTINUE
+		/**< Continue invoking callback with received data. */
+} e_rx_store_response;
+
+
+/*
+ * @Description   General Handle
+ */
+typedef void *t_handle;   /**< handle, used as object's descriptor */
+
+/* @} */
+
+/*
+ * @Function	  t_get_buf_function
+ *
+ * @Description   User callback function called by driver to get data buffer.
+ *
+ *		  User provides this function. Driver invokes it.
+ *
+ * @Param[in]	  h_buffer_pool		A handle to buffer pool manager
+ * @Param[out]	  p_buf_context_handle	Returns the user's private context that
+ *					should be associated with the buffer
+ *
+ * @Return	  Pointer to data buffer, NULL if error
+ */
+typedef uint8_t * (t_get_buf_function)(t_handle   h_buffer_pool,
+					t_handle *p_buf_context_handle);
+
+/*
+ * @Function	  t_put_buf_function
+ *
+ * @Description   User callback function called by driver to return data buffer.
+ *		  User provides this function. Driver invokes it.
+ *
+ * @Param[in]	  h_buffer_pool		A handle to buffer pool manager
+ * @Param[in]	  p_buffer		A pointer to buffer to return
+ * @Param[in]	  h_buf_context		The user's private context associated
+ *					with the returned buffer
+ *
+ * @Return	  E_OK on success; Error code otherwise
+ */
+typedef uint32_t (t_put_buf_function)(t_handle h_buffer_pool,
+				uint8_t  *p_buffer,
+				t_handle h_buf_context);
+
+/*
+ * @Function	  t_phys_to_virt
+ *
+ * @Description   Translates a physical address to the matching virtual address.
+ *
+ * @Param[in]	  addr		The physical address to translate.
+ *
+ * @Return	  Virtual address.
+ */
+typedef void *t_phys_to_virt(phys_address_t addr);
+
+/*
+ * @Function	  t_virt_to_phys
+ *
+ * @Description   Translates a virtual address to the matching physical address.
+ *
+ * @Param[in]	  addr		The virtual address to translate.
+ *
+ * @Return	  Physical address.
+ */
+typedef phys_address_t t_virt_to_phys(void *addr);
+
+/*
+ * @Description   Buffer Pool Information Structure.
+ */
+typedef struct t_buffer_pool_info {
+	t_handle		h_buffer_pool;
+		/**< A handle to the buffer pool mgr */
+	t_get_buf_function	*f_get_buf;
+		/**< User callback to get a free buffer */
+	t_put_buf_function	*f_put_buf;
+		/**< User callback to return a buffer */
+	uint16_t		buffer_size;
+		/**< Buffer size (in bytes) */
+	t_phys_to_virt	*f_phys_to_virt;
+		/**< User callback to translate pool buffers physical addresses
+		 * to virtual addresses
+		 */
+	t_virt_to_phys	*f_virt_to_phys;
+		/**< User callback to translate pool buffers virtual addresses
+		 * to physical addresses
+		 */
+} t_buffer_pool_info;
+
+/*
+ * @Description   User callback function called by driver with receive data.
+ *		  User provides this function. Driver invokes it.
+ *
+ * @Param[in]	  h_app		Application's handle, as was provided to the
+ *				driver by the user
+ * @Param[in]	  queue_id	Receive queue ID
+ * @Param[in]	  p_data	Pointer to the buffer with received data
+ * @Param[in]	  h_buf_context	The user's private context associated with the
+ *				given data buffer
+ * @Param[in]	  length	Length of received data
+ * @Param[in]	  status	Receive status and errors
+ * @Param[in]	  position	Position of buffer in frame
+ * @Param[in]	  flags		Driver-dependent information
+ *
+ * @Retval	  e_RX_STORE_RESPONSE_CONTINUE	order the driver to continue Rx
+ *						operation for all ready data.
+ * @Retval	  e_RX_STORE_RESPONSE_PAUSE	order the driver to stop Rx ops.
+ */
+typedef e_rx_store_response(t_rx_store_function)(t_handle  h_app,
+						uint32_t  queue_id,
+						uint8_t   *p_data,
+						t_handle  h_buf_context,
+						uint32_t  length,
+						uint16_t  status,
+						uint8_t   position,
+						uint32_t  flags);
+
+typedef struct t_device {
+	uintptr_t   id;	/**< the device id */
+	int	fd;	/**< the device file descriptor */
+	t_handle	h_user_priv;
+	uint32_t	owners;
+} t_device;
+
+t_handle create_device(t_handle h_user_priv, t_handle h_dev_id);
+t_handle get_device_id(t_handle h_dev);
+
+#endif /* __NCSW_EXT_H */
diff --git a/drivers/net/dpaa/fmlib/net_ext.h b/drivers/net/dpaa/fmlib/net_ext.h
new file mode 100644
index 000000000..4cd520931
--- /dev/null
+++ b/drivers/net/dpaa/fmlib/net_ext.h
@@ -0,0 +1,411 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
+ * Copyright 2008-2012 Freescale Semiconductor Inc.
+ * Copyright 2017-2019 NXP
+ */
+
+#ifndef __NET_EXT_H
+#define __NET_EXT_H
+
+#include "ncsw_ext.h"
+
+/*
+ * @Description		This file contains common and general netcomm headers
+ *			definitions.
+ */
+
+typedef uint8_t ioc_header_field_ppp_t;
+
+#define IOC_NET_HF_PPP_PID		(1)
+#define IOC_NET_HF_PPP_COMPRESSED	(IOC_NET_HF_PPP_PID << 1)
+#define IOC_NET_HF_PPP_ALL_FIELDS	((IOC_NET_HF_PPP_PID << 2) - 1)
+
+typedef uint8_t ioc_header_field_pppoe_t;
+
+#define ioc_net_hf_pppo_e_ver		(1)
+#define ioc_net_hf_pppo_e_type		(ioc_net_hf_pppo_e_ver << 1)
+#define ioc_net_hf_pppo_e_code		(ioc_net_hf_pppo_e_ver << 2)
+#define ioc_net_hf_pppo_e_sid		(ioc_net_hf_pppo_e_ver << 3)
+#define ioc_net_hf_pppo_e_len		(ioc_net_hf_pppo_e_ver << 4)
+#define ioc_net_hf_pppo_e_session	(ioc_net_hf_pppo_e_ver << 5)
+#define ioc_net_hf_pppo_e_pid		(ioc_net_hf_pppo_e_ver << 6)
+#define ioc_net_hf_pppo_e_all_fields	((ioc_net_hf_pppo_e_ver << 7) - 1)
+
+#define IOC_NET_HF_PPPMUX_PID		(1)
+#define IOC_NET_HF_PPPMUX_CKSUM		(IOC_NET_HF_PPPMUX_PID << 1)
+#define IOC_NET_HF_PPPMUX_COMPRESSED	(IOC_NET_HF_PPPMUX_PID << 2)
+#define IOC_NET_HF_PPPMUX_ALL_FIELDS	((IOC_NET_HF_PPPMUX_PID << 3) - 1)
+
+#define IOC_NET_HF_PPPMUX_SUBFRAME_PFF	(1)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_LXT	(IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 1)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_LEN	(IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 2)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_PID	(IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 3)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_USE_PID \
+		(IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 4)
+#define IOC_NET_HF_PPPMUX_SUBFRAME_ALL_FIELDS \
+		((IOC_NET_HF_PPPMUX_SUBFRAME_PFF << 5) - 1)
+
+typedef uint8_t ioc_header_field_eth_t;
+
+#define IOC_NET_HF_ETH_DA		(1)
+#define IOC_NET_HF_ETH_SA		(IOC_NET_HF_ETH_DA << 1)
+#define IOC_NET_HF_ETH_LENGTH		(IOC_NET_HF_ETH_DA << 2)
+#define IOC_NET_HF_ETH_TYPE		(IOC_NET_HF_ETH_DA << 3)
+#define IOC_NET_HF_ETH_FINAL_CKSUM	(IOC_NET_HF_ETH_DA << 4)
+#define IOC_NET_HF_ETH_PADDING		(IOC_NET_HF_ETH_DA << 5)
+#define IOC_NET_HF_ETH_ALL_FIELDS	((IOC_NET_HF_ETH_DA << 6) - 1)
+
+#define IOC_NET_HF_ETH_ADDR_SIZE	6
+
+typedef uint16_t ioc_header_field_ip_t;
+
+#define IOC_NET_HF_IP_VER		(1)
+#define IOC_NET_HF_IP_DSCP		(IOC_NET_HF_IP_VER << 2)
+#define IOC_NET_HF_IP_ECN		(IOC_NET_HF_IP_VER << 3)
+#define IOC_NET_HF_IP_PROTO		(IOC_NET_HF_IP_VER << 4)
+
+#define IOC_NET_HF_IP_PROTO_SIZE	1
+
+typedef uint16_t ioc_header_field_ipv4_t;
+
+#define ioc_net_hf_ipv_4_ver		(1)
+#define ioc_net_hf_ipv_4_hdr_len		(ioc_net_hf_ipv_4_ver << 1)
+#define ioc_net_hf_ipv_4_tos		(ioc_net_hf_ipv_4_ver << 2)
+#define ioc_net_hf_ipv_4_total_len	(ioc_net_hf_ipv_4_ver << 3)
+#define ioc_net_hf_ipv_4_id		(ioc_net_hf_ipv_4_ver << 4)
+#define ioc_net_hf_ipv_4_flag_d		(ioc_net_hf_ipv_4_ver << 5)
+#define ioc_net_hf_ipv_4_flag_m		(ioc_net_hf_ipv_4_ver << 6)
+#define ioc_net_hf_ipv_4_offset		(ioc_net_hf_ipv_4_ver << 7)
+#define ioc_net_hf_ipv_4_ttl		(ioc_net_hf_ipv_4_ver << 8)
+#define ioc_net_hf_ipv_4_proto		(ioc_net_hf_ipv_4_ver << 9)
+#define ioc_net_hf_ipv_4_cksum		(ioc_net_hf_ipv_4_ver << 10)
+#define ioc_net_hf_ipv_4_src_ip		(ioc_net_hf_ipv_4_ver << 11)
+#define ioc_net_hf_ipv_4_dst_ip		(ioc_net_hf_ipv_4_ver << 12)
+#define ioc_net_hf_ipv_4_opts		(ioc_net_hf_ipv_4_ver << 13)
+#define ioc_net_hf_ipv_4_opts_COUNT	(ioc_net_hf_ipv_4_ver << 14)
+#define ioc_net_hf_ipv_4_all_fields	((ioc_net_hf_ipv_4_ver << 15) - 1)
+
+#define ioc_net_hf_ipv_4_addr_size	4
+#define ioc_net_hf_ipv_4_proto_SIZE	1
+
+typedef uint8_t ioc_header_field_ipv6_t;
+
+#define ioc_net_hf_ipv_6_ver		(1)
+#define ioc_net_hf_ipv_6_tc		(ioc_net_hf_ipv_6_ver << 1)
+#define ioc_net_hf_ipv_6_src_ip		(ioc_net_hf_ipv_6_ver << 2)
+#define ioc_net_hf_ipv_6_dst_ip		(ioc_net_hf_ipv_6_ver << 3)
+#define ioc_net_hf_ipv_6_next_hdr	(ioc_net_hf_ipv_6_ver << 4)
+#define ioc_net_hf_ipv_6_fl		(ioc_net_hf_ipv_6_ver << 5)
+#define ioc_net_hf_ipv_6_hop_limit	(ioc_net_hf_ipv_6_ver << 6)
+#define ioc_net_hf_ipv_6_all_fields	((ioc_net_hf_ipv_6_ver << 7) - 1)
+
+#define ioc_net_hf_ipv6_addr_size	16
+#define ioc_net_hf_ipv_6_next_hdr_SIZE	1
+
+#define IOC_NET_HF_ICMP_TYPE		(1)
+#define IOC_NET_HF_ICMP_CODE		(IOC_NET_HF_ICMP_TYPE << 1)
+#define IOC_NET_HF_ICMP_CKSUM		(IOC_NET_HF_ICMP_TYPE << 2)
+#define IOC_NET_HF_ICMP_ID		(IOC_NET_HF_ICMP_TYPE << 3)
+#define IOC_NET_HF_ICMP_SQ_NUM		(IOC_NET_HF_ICMP_TYPE << 4)
+#define IOC_NET_HF_ICMP_ALL_FIELDS	((IOC_NET_HF_ICMP_TYPE << 5) - 1)
+
+#define IOC_NET_HF_ICMP_CODE_SIZE	1
+#define IOC_NET_HF_ICMP_TYPE_SIZE	1
+
+#define IOC_NET_HF_IGMP_VERSION		(1)
+#define IOC_NET_HF_IGMP_TYPE		(IOC_NET_HF_IGMP_VERSION << 1)
+#define IOC_NET_HF_IGMP_CKSUM		(IOC_NET_HF_IGMP_VERSION << 2)
+#define IOC_NET_HF_IGMP_DATA		(IOC_NET_HF_IGMP_VERSION << 3)
+#define IOC_NET_HF_IGMP_ALL_FIELDS	((IOC_NET_HF_IGMP_VERSION << 4) - 1)
+
+typedef uint16_t ioc_header_field_tcp_t;
+
+#define IOC_NET_HF_TCP_PORT_SRC		(1)
+#define IOC_NET_HF_TCP_PORT_DST		(IOC_NET_HF_TCP_PORT_SRC << 1)
+#define IOC_NET_HF_TCP_SEQ		(IOC_NET_HF_TCP_PORT_SRC << 2)
+#define IOC_NET_HF_TCP_ACK		(IOC_NET_HF_TCP_PORT_SRC << 3)
+#define IOC_NET_HF_TCP_OFFSET		(IOC_NET_HF_TCP_PORT_SRC << 4)
+#define IOC_NET_HF_TCP_FLAGS		(IOC_NET_HF_TCP_PORT_SRC << 5)
+#define IOC_NET_HF_TCP_WINDOW		(IOC_NET_HF_TCP_PORT_SRC << 6)
+#define IOC_NET_HF_TCP_CKSUM		(IOC_NET_HF_TCP_PORT_SRC << 7)
+#define IOC_NET_HF_TCP_URGPTR		(IOC_NET_HF_TCP_PORT_SRC << 8)
+#define IOC_NET_HF_TCP_OPTS		(IOC_NET_HF_TCP_PORT_SRC << 9)
+#define IOC_NET_HF_TCP_OPTS_COUNT	(IOC_NET_HF_TCP_PORT_SRC << 10)
+#define IOC_NET_HF_TCP_ALL_FIELDS	((IOC_NET_HF_TCP_PORT_SRC << 11) - 1)
+
+#define IOC_NET_HF_TCP_PORT_SIZE	2
+
+typedef uint8_t ioc_header_field_sctp_t;
+
+#define IOC_NET_HF_SCTP_PORT_SRC	(1)
+#define IOC_NET_HF_SCTP_PORT_DST	(IOC_NET_HF_SCTP_PORT_SRC << 1)
+#define IOC_NET_HF_SCTP_VER_TAG		(IOC_NET_HF_SCTP_PORT_SRC << 2)
+#define IOC_NET_HF_SCTP_CKSUM		(IOC_NET_HF_SCTP_PORT_SRC << 3)
+#define IOC_NET_HF_SCTP_ALL_FIELDS	((IOC_NET_HF_SCTP_PORT_SRC << 4) - 1)
+
+#define IOC_NET_HF_SCTP_PORT_SIZE	2
+
+typedef uint8_t ioc_header_field_dccp_t;
+
+#define IOC_NET_HF_DCCP_PORT_SRC	(1)
+#define IOC_NET_HF_DCCP_PORT_DST	(IOC_NET_HF_DCCP_PORT_SRC << 1)
+#define IOC_NET_HF_DCCP_ALL_FIELDS	((IOC_NET_HF_DCCP_PORT_SRC << 2) - 1)
+
+#define IOC_NET_HF_DCCP_PORT_SIZE	2
+
+typedef uint8_t ioc_header_field_udp_t;
+
+#define IOC_NET_HF_UDP_PORT_SRC		(1)
+#define IOC_NET_HF_UDP_PORT_DST		(IOC_NET_HF_UDP_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_LEN		(IOC_NET_HF_UDP_PORT_SRC << 2)
+#define IOC_NET_HF_UDP_CKSUM		(IOC_NET_HF_UDP_PORT_SRC << 3)
+#define IOC_NET_HF_UDP_ALL_FIELDS	((IOC_NET_HF_UDP_PORT_SRC << 4) - 1)
+
+#define IOC_NET_HF_UDP_PORT_SIZE	2
+
+typedef uint8_t ioc_header_field_udp_lite_t;
+
+#define IOC_NET_HF_UDP_LITE_PORT_SRC	(1)
+#define IOC_NET_HF_UDP_LITE_PORT_DST	(IOC_NET_HF_UDP_LITE_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_LITE_ALL_FIELDS \
+		((IOC_NET_HF_UDP_LITE_PORT_SRC << 2) - 1)
+
+#define IOC_NET_HF_UDP_LITE_PORT_SIZE		2
+
+typedef uint8_t ioc_header_field_udp_encap_esp_t;
+
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC	(1)
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_DST \
+		(IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 1)
+#define IOC_NET_HF_UDP_ENCAP_ESP_LEN \
+		(IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 2)
+#define IOC_NET_HF_UDP_ENCAP_ESP_CKSUM \
+		(IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 3)
+#define IOC_NET_HF_UDP_ENCAP_ESP_SPI \
+		(IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 4)
+#define IOC_NET_HF_UDP_ENCAP_ESP_SEQUENCE_NUM \
+		(IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 5)
+#define IOC_NET_HF_UDP_ENCAP_ESP_ALL_FIELDS \
+		((IOC_NET_HF_UDP_ENCAP_ESP_PORT_SRC << 6) - 1)
+
+#define IOC_NET_HF_UDP_ENCAP_ESP_PORT_SIZE	2
+#define IOC_NET_HF_UDP_ENCAP_ESP_SPI_SIZE	4
+
+#define IOC_NET_HF_IPHC_CID		(1)
+#define IOC_NET_HF_IPHC_CID_TYPE	(IOC_NET_HF_IPHC_CID << 1)
+#define IOC_NET_HF_IPHC_HCINDEX		(IOC_NET_HF_IPHC_CID << 2)
+#define IOC_NET_HF_IPHC_GEN		(IOC_NET_HF_IPHC_CID << 3)
+#define IOC_NET_HF_IPHC_D_BIT		(IOC_NET_HF_IPHC_CID << 4)
+#define IOC_NET_HF_IPHC_ALL_FIELDS	((IOC_NET_HF_IPHC_CID << 5) - 1)
+
+#define IOC_NET_HF_SCTP_CHUNK_DATA_TYPE		(1)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_FLAGS \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 1)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_LENGTH \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 2)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_TSN \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 3)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_STREAM_ID \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 4)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_STREAM_SQN \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 5)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_PAYLOAD_PID \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 6)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_UNORDERED \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 7)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_BEGINNING \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 8)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_END \
+		(IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 9)
+#define IOC_NET_HF_SCTP_CHUNK_DATA_ALL_FIELDS \
+		((IOC_NET_HF_SCTP_CHUNK_DATA_TYPE << 10) - 1)
+
+#define ioc_net_hf_l2tpv_2_type_bit	(1)
+#define ioc_net_hf_l2tpv_2_length_bit	(ioc_net_hf_l2tpv_2_type_bit << 1)
+#define ioc_net_hf_l2tpv_2_sequence_bit	(ioc_net_hf_l2tpv_2_type_bit << 2)
+#define ioc_net_hf_l2tpv_2_offset_bit	(ioc_net_hf_l2tpv_2_type_bit << 3)
+#define ioc_net_hf_l2tpv_2_priority_bit	(ioc_net_hf_l2tpv_2_type_bit << 4)
+#define ioc_net_hf_l2tpv_2_version	(ioc_net_hf_l2tpv_2_type_bit << 5)
+#define ioc_net_hf_l2tpv_2_len		(ioc_net_hf_l2tpv_2_type_bit << 6)
+#define ioc_net_hf_l2tpv_2_tunnel_id	(ioc_net_hf_l2tpv_2_type_bit << 7)
+#define ioc_net_hf_l2tpv_2_session_id	(ioc_net_hf_l2tpv_2_type_bit << 8)
+#define ioc_net_hf_l2tpv_2_ns		(ioc_net_hf_l2tpv_2_type_bit << 9)
+#define ioc_net_hf_l2tpv_2_nr		(ioc_net_hf_l2tpv_2_type_bit << 10)
+#define ioc_net_hf_l2tpv_2_offset_size	(ioc_net_hf_l2tpv_2_type_bit << 11)
+#define ioc_net_hf_l2tpv_2_first_byte	(ioc_net_hf_l2tpv_2_type_bit << 12)
+#define ioc_net_hf_l2tpv_2_all_fields \
+		((ioc_net_hf_l2tpv_2_type_bit << 13) - 1)
+
+#define ioc_net_hf_l2tpv_3_ctrl_type_bit	(1)
+#define ioc_net_hf_l2tpv_3_ctrl_length_bit \
+		(ioc_net_hf_l2tpv_3_ctrl_type_bit << 1)
+#define ioc_net_hf_l2tpv_3_ctrl_sequence_bit \
+		(ioc_net_hf_l2tpv_3_ctrl_type_bit << 2)
+#define ioc_net_hf_l2tpv_3_ctrl_version	(ioc_net_hf_l2tpv_3_ctrl_type_bit << 3)
+#define ioc_net_hf_l2tpv_3_ctrl_length	(ioc_net_hf_l2tpv_3_ctrl_type_bit << 4)
+#define ioc_net_hf_l2tpv_3_ctrl_control	(ioc_net_hf_l2tpv_3_ctrl_type_bit << 5)
+#define ioc_net_hf_l2tpv_3_ctrl_sent	(ioc_net_hf_l2tpv_3_ctrl_type_bit << 6)
+#define ioc_net_hf_l2tpv_3_ctrl_recv	(ioc_net_hf_l2tpv_3_ctrl_type_bit << 7)
+#define ioc_net_hf_l2tpv_3_ctrl_first_byte \
+		(ioc_net_hf_l2tpv_3_ctrl_type_bit << 8)
+#define ioc_net_hf_l2tpv_3_ctrl_all_fields \
+		((ioc_net_hf_l2tpv_3_ctrl_type_bit << 9) - 1)
+
+#define ioc_net_hf_l2tpv_3_sess_type_bit	(1)
+#define ioc_net_hf_l2tpv_3_sess_version	(ioc_net_hf_l2tpv_3_sess_type_bit << 1)
+#define ioc_net_hf_l2tpv_3_sess_id	(ioc_net_hf_l2tpv_3_sess_type_bit << 2)
+#define ioc_net_hf_l2tpv_3_sess_cookie	(ioc_net_hf_l2tpv_3_sess_type_bit << 3)
+#define ioc_net_hf_l2tpv_3_sess_all_fields \
+		((ioc_net_hf_l2tpv_3_sess_type_bit << 4) - 1)
+
+typedef uint8_t ioc_header_field_vlan_t;
+
+#define IOC_NET_HF_VLAN_VPRI		(1)
+#define IOC_NET_HF_VLAN_CFI		(IOC_NET_HF_VLAN_VPRI << 1)
+#define IOC_NET_HF_VLAN_VID		(IOC_NET_HF_VLAN_VPRI << 2)
+#define IOC_NET_HF_VLAN_LENGTH		(IOC_NET_HF_VLAN_VPRI << 3)
+#define IOC_NET_HF_VLAN_TYPE		(IOC_NET_HF_VLAN_VPRI << 4)
+#define IOC_NET_HF_VLAN_ALL_FIELDS	((IOC_NET_HF_VLAN_VPRI << 5) - 1)
+
+#define IOC_NET_HF_VLAN_TCI		(IOC_NET_HF_VLAN_VPRI | \
+				IOC_NET_HF_VLAN_CFI | \
+				IOC_NET_HF_VLAN_VID)
+
+typedef uint8_t ioc_header_field_llc_t;
+
+#define IOC_NET_HF_LLC_DSAP		(1)
+#define IOC_NET_HF_LLC_SSAP		(IOC_NET_HF_LLC_DSAP << 1)
+#define IOC_NET_HF_LLC_CTRL		(IOC_NET_HF_LLC_DSAP << 2)
+#define IOC_NET_HF_LLC_ALL_FIELDS	((IOC_NET_HF_LLC_DSAP << 3) - 1)
+
+#define IOC_NET_HF_NLPID_NLPID	(1)
+#define IOC_NET_HF_NLPID_ALL_FIELDS	((IOC_NET_HF_NLPID_NLPID << 1) - 1)
+
+typedef uint8_t ioc_header_field_snap_t;
+
+#define IOC_NET_HF_SNAP_OUI		(1)
+#define IOC_NET_HF_SNAP_PID		(IOC_NET_HF_SNAP_OUI << 1)
+#define IOC_NET_HF_SNAP_ALL_FIELDS	((IOC_NET_HF_SNAP_OUI << 2) - 1)
+
+typedef uint8_t ioc_header_field_llc_snap_t;
+
+#define IOC_NET_HF_LLC_SNAP_TYPE	(1)
+#define IOC_NET_HF_LLC_SNAP_ALL_FIELDS	((IOC_NET_HF_LLC_SNAP_TYPE << 1) - 1)
+
+#define IOC_NET_HF_ARP_HTYPE		(1)
+#define IOC_NET_HF_ARP_PTYPE		(IOC_NET_HF_ARP_HTYPE << 1)
+#define IOC_NET_HF_ARP_HLEN		(IOC_NET_HF_ARP_HTYPE << 2)
+#define IOC_NET_HF_ARP_PLEN		(IOC_NET_HF_ARP_HTYPE << 3)
+#define IOC_NET_HF_ARP_OPER		(IOC_NET_HF_ARP_HTYPE << 4)
+#define IOC_NET_HF_ARP_SHA		(IOC_NET_HF_ARP_HTYPE << 5)
+#define IOC_NET_HF_ARP_SPA		(IOC_NET_HF_ARP_HTYPE << 6)
+#define IOC_NET_HF_ARP_TH		(IOC_NET_HF_ARP_HTYPE << 7)
+#define IOC_NET_HF_ARP_TPA		(IOC_NET_HF_ARP_HTYPE << 8)
+#define IOC_NET_HF_ARP_ALL_FIELDS	((IOC_NET_HF_ARP_HTYPE << 9) - 1)
+
+#define IOC_NET_HF_RFC2684_LLC		(1)
+#define IOC_NET_HF_RFC2684_NLPID	(IOC_NET_HF_RFC2684_LLC << 1)
+#define IOC_NET_HF_RFC2684_OUI		(IOC_NET_HF_RFC2684_LLC << 2)
+#define IOC_NET_HF_RFC2684_PID		(IOC_NET_HF_RFC2684_LLC << 3)
+#define IOC_NET_HF_RFC2684_VPN_OUI	(IOC_NET_HF_RFC2684_LLC << 4)
+#define IOC_NET_HF_RFC2684_VPN_IDX	(IOC_NET_HF_RFC2684_LLC << 5)
+#define IOC_NET_HF_RFC2684_ALL_FIELDS	((IOC_NET_HF_RFC2684_LLC << 6) - 1)
+
+#define IOC_NET_HF_USER_DEFINED_SRCPORT	(1)
+#define IOC_NET_HF_USER_DEFINED_PCDID	(IOC_NET_HF_USER_DEFINED_SRCPORT << 1)
+#define IOC_NET_HF_USER_DEFINED_ALL_FIELDS \
+		((IOC_NET_HF_USER_DEFINED_SRCPORT << 2) - 1)
+
+#define IOC_NET_HF_PAYLOAD_BUFFER	(1)
+#define IOC_NET_HF_PAYLOAD_SIZE		(IOC_NET_HF_PAYLOAD_BUFFER << 1)
+#define IOC_NET_HF_MAX_FRM_SIZE		(IOC_NET_HF_PAYLOAD_BUFFER << 2)
+#define IOC_NET_HF_MIN_FRM_SIZE		(IOC_NET_HF_PAYLOAD_BUFFER << 3)
+#define IOC_NET_HF_PAYLOAD_TYPE		(IOC_NET_HF_PAYLOAD_BUFFER << 4)
+#define IOC_NET_HF_FRAME_SIZE		(IOC_NET_HF_PAYLOAD_BUFFER << 5)
+#define IOC_NET_HF_PAYLOAD_ALL_FIELDS	((IOC_NET_HF_PAYLOAD_BUFFER << 6) - 1)
+
+typedef uint8_t ioc_header_field_gre_t;
+
+#define IOC_NET_HF_GRE_TYPE		(1)
+#define IOC_NET_HF_GRE_ALL_FIELDS	((IOC_NET_HF_GRE_TYPE << 1) - 1)
+
+typedef uint8_t ioc_header_field_minencap_t;
+
+#define IOC_NET_HF_MINENCAP_SRC_IP	(1)
+#define IOC_NET_HF_MINENCAP_DST_IP	(IOC_NET_HF_MINENCAP_SRC_IP << 1)
+#define IOC_NET_HF_MINENCAP_TYPE	(IOC_NET_HF_MINENCAP_SRC_IP << 2)
+#define IOC_NET_HF_MINENCAP_ALL_FIELDS	((IOC_NET_HF_MINENCAP_SRC_IP << 3) - 1)
+
+typedef uint8_t ioc_header_field_ipsec_ah_t;
+
+#define IOC_NET_HF_IPSEC_AH_SPI	(1)
+#define IOC_NET_HF_IPSEC_AH_NH		(IOC_NET_HF_IPSEC_AH_SPI << 1)
+#define IOC_NET_HF_IPSEC_AH_ALL_FIELDS	((IOC_NET_HF_IPSEC_AH_SPI << 2) - 1)
+
+typedef uint8_t ioc_header_field_ipsec_esp_t;
+
+#define IOC_NET_HF_IPSEC_ESP_SPI	(1)
+#define IOC_NET_HF_IPSEC_ESP_SEQUENCE_NUM	(IOC_NET_HF_IPSEC_ESP_SPI << 1)
+#define IOC_NET_HF_IPSEC_ESP_ALL_FIELDS	((IOC_NET_HF_IPSEC_ESP_SPI << 2) - 1)
+
+#define IOC_NET_HF_IPSEC_ESP_SPI_SIZE		4
+
+
+typedef uint8_t ioc_header_field_mpls_t;
+
+#define IOC_NET_HF_MPLS_LABEL_STACK		(1)
+#define IOC_NET_HF_MPLS_LABEL_STACK_ALL_FIELDS \
+		((IOC_NET_HF_MPLS_LABEL_STACK << 1) - 1)
+
+typedef uint8_t ioc_header_field_macsec_t;
+
+#define IOC_NET_HF_MACSEC_SECTAG	(1)
+#define IOC_NET_HF_MACSEC_ALL_FIELDS	((IOC_NET_HF_MACSEC_SECTAG << 1) - 1)
+
+typedef enum {
+	HEADER_TYPE_NONE = 0,
+	HEADER_TYPE_PAYLOAD,
+	HEADER_TYPE_ETH,
+	HEADER_TYPE_VLAN,
+	HEADER_TYPE_IPV4,
+	HEADER_TYPE_IPV6,
+	HEADER_TYPE_IP,
+	HEADER_TYPE_TCP,
+	HEADER_TYPE_UDP,
+	HEADER_TYPE_UDP_LITE,
+	HEADER_TYPE_IPHC,
+	HEADER_TYPE_SCTP,
+	HEADER_TYPE_SCTP_CHUNK_DATA,
+	HEADER_TYPE_PPPOE,
+	HEADER_TYPE_PPP,
+	HEADER_TYPE_PPPMUX,
+	HEADER_TYPE_PPPMUX_SUBFRAME,
+	HEADER_TYPE_L2TPV2,
+	HEADER_TYPE_L2TPV3_CTRL,
+	HEADER_TYPE_L2TPV3_SESS,
+	HEADER_TYPE_LLC,
+	HEADER_TYPE_LLC_SNAP,
+	HEADER_TYPE_NLPID,
+	HEADER_TYPE_SNAP,
+	HEADER_TYPE_MPLS,
+	HEADER_TYPE_IPSEC_AH,
+	HEADER_TYPE_IPSEC_ESP,
+	HEADER_TYPE_UDP_ENCAP_ESP, /* RFC 3948 */
+	HEADER_TYPE_MACSEC,
+	HEADER_TYPE_GRE,
+	HEADER_TYPE_MINENCAP,
+	HEADER_TYPE_DCCP,
+	HEADER_TYPE_ICMP,
+	HEADER_TYPE_IGMP,
+	HEADER_TYPE_ARP,
+	HEADER_TYPE_CAPWAP,
+	HEADER_TYPE_CAPWAP_DTLS,
+	HEADER_TYPE_RFC2684,
+	HEADER_TYPE_USER_DEFINED_L2,
+	HEADER_TYPE_USER_DEFINED_L3,
+	HEADER_TYPE_USER_DEFINED_L4,
+	HEADER_TYPE_USER_DEFINED_SHIM1,
+	HEADER_TYPE_USER_DEFINED_SHIM2,
+	MAX_HEADER_TYPE_COUNT
+} ioc_net_header_type;
+
+#endif /* __NET_EXT_H */
diff --git a/drivers/net/dpaa/meson.build b/drivers/net/dpaa/meson.build
index 271416f08..b2cd555fd 100644
--- a/drivers/net/dpaa/meson.build
+++ b/drivers/net/dpaa/meson.build
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: BSD-3-Clause
-# Copyright 2018 NXP
+# Copyright 2018-2020 NXP
 
 if not is_linux
 	build = false
@@ -8,6 +8,7 @@ endif
 deps += ['mempool_dpaa']
 
 sources = files('dpaa_ethdev.c',
+		'fmlib/fm_lib.c',
 		'dpaa_rxtx.c')
 
 if cc.has_argument('-Wno-pointer-arith')
-- 
2.17.1



More information about the dev mailing list