[dpdk-dev] [PATCH V2 1/3] ethdev: introduce FEC API

Min Hu (Connor) humin29 at huawei.com
Wed Sep 9 04:42:59 CEST 2020


This patch adds Forward error correction(FEC) support for ethdev.
Introduce APIs which support query and config FEC information in
hardware.

Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei at huawei.com>
Reviewed-by: Chengwen Feng <fengchengwen at huawei.com>
Reviewed-by: Chengchang Tang <tangchengchang at huawei.com>
---
 lib/librte_ethdev/rte_ethdev.c           | 50 +++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev.h           | 74 ++++++++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_core.h      | 77 ++++++++++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_version.map |  5 +++
 4 files changed, 206 insertions(+)

diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 7858ad5..b7ac791 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -3642,6 +3642,56 @@ rte_eth_led_off(uint16_t port_id)
 	return eth_err(port_id, (*dev->dev_ops->dev_led_off)(dev));
 }
 
+int
+rte_eth_fec_get_capability(uint16_t port_id, uint8_t *fec_cap)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get_capability, -ENOTSUP);
+	return eth_err(port_id, (*dev->dev_ops->fec_get_capability)(dev,
+								fec_cap));
+}
+
+int
+rte_eth_fec_get(uint16_t port_id, enum rte_fec_mode *mode)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get, -ENOTSUP);
+	return eth_err(port_id, (*dev->dev_ops->fec_get)(dev, mode));
+}
+
+int
+rte_eth_fec_set(uint16_t port_id, enum rte_fec_mode mode)
+{
+	struct rte_eth_dev *dev;
+	uint8_t fec_mode_mask;
+	int ret;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	ret = rte_eth_fec_get_capability(port_id, &fec_mode_mask);
+	if (ret)
+		return ret;
+
+	/*
+	 * Check whether the configured mode is within the FEC capability.
+	 * If not, the configured mode will not be supported.
+	 */
+	if (!(fec_mode_mask & (1U << (uint8_t)mode))) {
+		RTE_ETHDEV_LOG(ERR, "unsupported fec mode=%d\n", mode);
+		return -EINVAL;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_set, -ENOTSUP);
+	return eth_err(port_id, (*dev->dev_ops->fec_set)(dev, mode));
+}
+
 /*
  * Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
  * an empty spot.
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 70295d7..23e069a 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -1511,6 +1511,17 @@ struct rte_eth_dcb_info {
 	struct rte_eth_dcb_tc_queue_mapping tc_queue;
 };
 
+/**
+ * This enum indicates the possible (forward error correction)FEC modes
+ * of an ethdev port.
+ */
+enum rte_fec_mode {
+	ETH_FEC_NOFEC = 0,      /**< FEC is off */
+	ETH_FEC_BASER,          /**< FEC using common algorithm */
+	ETH_FEC_RS,             /**< FEC using RS algorithm */
+	ETH_FEC_AUTO            /**< FEC autonegotiation modes */
+};
+
 #define RTE_ETH_ALL RTE_MAX_ETHPORTS
 
 /* Macros to check for valid port */
@@ -3328,6 +3339,69 @@ int  rte_eth_led_on(uint16_t port_id);
 int  rte_eth_led_off(uint16_t port_id);
 
 /**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get Forward Error Correction(FEC) capability.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param fec_cap
+ *   returns the FEC capability from the device, as follows:
+ *   bit0: nofec
+ *   bit1: baser
+ *   bit2: rs
+ *   bit3: auto
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ *     that operation.
+ *   - (-EIO) if device is removed.
+ *   - (-ENODEV)  if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_get_capability(uint16_t port_id, uint8_t *fec_cap);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get current Forward Error Correction(FEC) mode.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mode
+ *   returns the FEC mode from the device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ *     that operation.
+ *   - (-EIO) if device is removed.
+ *   - (-ENODEV)  if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_get(uint16_t port_id, enum rte_fec_mode *mode);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Set Forward Error Correction(FEC) mode.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mode
+ *   the FEC mode.
+ * @return
+ *   - (0) if successful.
+ *   - (-EINVAL) if the FEC mode is not valid.
+ *   - (-EIO) if device is removed.
+ *   - (-ENODEV)  if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_set(uint16_t port_id, enum rte_fec_mode mode);
+
+/**
  * Get current status of the Ethernet link flow control for Ethernet device
  *
  * @param port_id
diff --git a/lib/librte_ethdev/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
index 32407dd..efd9dc5 100644
--- a/lib/librte_ethdev/rte_ethdev_core.h
+++ b/lib/librte_ethdev/rte_ethdev_core.h
@@ -604,6 +604,76 @@ typedef int (*eth_tx_hairpin_queue_setup_t)
 	 const struct rte_eth_hairpin_conf *hairpin_conf);
 
 /**
+ * @internal
+ * Get Forward Error Correction(FEC) capability.
+ *
+ * @param dev
+ *   ethdev handle of port.
+ * @param fec_cap
+ *   returns the FEC capability from the device.
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ *   Success, get FEC success.
+ * @retval -EOPNOTSUPP
+ *   operation is not supported.
+ * @retval -EIO
+ *   device is removed.
+ * @retval -ENODEV
+ *   Device is gone.
+ */
+typedef int (*eth_fec_get_capability_t)(struct rte_eth_dev *dev,
+					uint8_t *fec_cap);
+
+/**
+ * @internal
+ * Get Forward Error Correction(FEC) mode.
+ *
+ * @param dev
+ *   ethdev handle of port.
+ * @param mode
+ *   returns the FEC mode from the device.
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ *   Success, get FEC success.
+ * @retval -EOPNOTSUPP
+ *   operation is not supported.
+ * @retval -EIO
+ *   device is removed.
+ * @retval -ENODEV
+ *   Device is gone.
+ */
+typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev, enum rte_fec_mode *mode);
+
+/**
+ * @internal
+ *   Set Forward Error Correction(FEC) mode.
+ *
+ * @param dev
+ *   ethdev handle of port.
+ * @param mode
+ *   the FEC mode.
+ *
+ * @return
+ *   Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ *   Success, set FEC success.
+ * @retval -EOPNOTSUPP
+ *   operation is not supported.
+ * @retval -EIO
+ *   device is removed.
+ * @retval -ENODEV
+ *   Device is gone.
+ */
+typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, enum rte_fec_mode mode);
+
+/**
  * @internal A structure containing the functions exported by an Ethernet driver.
  */
 struct eth_dev_ops {
@@ -752,6 +822,13 @@ struct eth_dev_ops {
 	/**< Set up device RX hairpin queue. */
 	eth_tx_hairpin_queue_setup_t tx_hairpin_queue_setup;
 	/**< Set up device TX hairpin queue. */
+
+	eth_fec_get_capability_t fec_get_capability;
+	/**< Get Forward Error Correction(FEC) capability; */
+	eth_fec_get_t fec_get;
+	/**< Get Forward Error Correction(FEC) mode; */
+	eth_fec_set_t fec_set;
+	/**< Set Forward Error Correction(FEC) mode; */
 };
 
 /**
diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
index 1212a17..33cf5e4 100644
--- a/lib/librte_ethdev/rte_ethdev_version.map
+++ b/lib/librte_ethdev/rte_ethdev_version.map
@@ -241,6 +241,11 @@ EXPERIMENTAL {
 	__rte_ethdev_trace_rx_burst;
 	__rte_ethdev_trace_tx_burst;
 	rte_flow_get_aged_flows;
+
+	# added in 20.11
+	rte_eth_fec_get_capability;
+	rte_eth_fec_get;
+	rte_eth_fec_set;
 };
 
 INTERNAL {
-- 
2.7.4



More information about the dev mailing list