[dpdk-dev] [v2 2/2] test: add testcase for crypto enqueue callback

Gujjar, Abhinandan S abhinandan.gujjar at intel.com
Fri Sep 11 10:35:13 CEST 2020


Sure Honnappa.

Thanks
Abhinandan

> -----Original Message-----
> From: Honnappa Nagarahalli <Honnappa.Nagarahalli at arm.com>
> Sent: Thursday, September 10, 2020 4:21 AM
> To: Gujjar, Abhinandan S <abhinandan.gujjar at intel.com>; dev at dpdk.org
> Cc: Doherty, Declan <declan.doherty at intel.com>; jerinj at marvell.com;
> Akhil.goyal at nxp.com; Vangati, Narender <narender.vangati at intel.com>;
> Ananyev, Konstantin <konstantin.ananyev at intel.com>; nd <nd at arm.com>
> Subject: RE: [v2 2/2] test: add testcase for crypto enqueue callback
> 
> <snip>
> 
> Hi Abhinandan,
> 	This test case looks good. I think you could add few negative test
> cases as well. For ex: removing the call back without registering the RCU.
> 
> Thanks,
> Honnappa
> 
> > >
> > > The purpose of this testcase is to showcase the cryptodev enqueue
> > > callback usage with RCU support.
> > >
> > > Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar at intel.com>
> > > ---
> > >  app/test/test_cryptodev.c | 123
> > > +++++++++++++++++++++++++++++++++++++++++++++-
> > >  1 file changed, 122 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
> > > index
> > > 70bf6fe..735f501 100644
> > > --- a/app/test/test_cryptodev.c
> > > +++ b/app/test/test_cryptodev.c
> > > @@ -17,6 +17,7 @@
> > >  #include <rte_cryptodev.h>
> > >  #include <rte_cryptodev_pmd.h>
> > >  #include <rte_string_fns.h>
> > > +#include <rte_rcu_qsbr.h>
> > >
> > >  #ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER  #include
> > > <rte_cryptodev_scheduler.h> @@ -11889,6 +11890,123 @@ struct
> > > test_crypto_vector {
> > >  	return 0;
> > >  }
> > >
> > > +#ifdef RTE_CRYPTODEV_CALLBACKS
> > > +static uint16_t
> > > +test_enq_callback(uint16_t dev_id, uint16_t qp_id, struct
> > > +rte_crypto_op
> > > **ops,
> > > +	      uint16_t nb_ops, void *user_param) {
> > > +	RTE_SET_USED(dev_id);
> > > +	RTE_SET_USED(qp_id);
> > > +	RTE_SET_USED(ops);
> > > +	RTE_SET_USED(user_param);
> > > +
> > > +	return nb_ops;
> > > +}
> > > +
> > > +/*
> > > + * Thread using enqueue callback with RCU.
> > > + */
> > > +static int
> > > +test_enq_callback_rcu_thread(void *arg) {
> > > +	uint16_t thread_id = 1;
> > > +	struct rte_rcu_qsbr *qsbr = arg;
> > > +
> > > +	/* Register this thread to report quiescent state */
> > > +	rte_rcu_qsbr_thread_register(qsbr, thread_id);
> > > +	rte_rcu_qsbr_thread_online(qsbr, thread_id);
> > > +
> > > +
> > > +	/* DP thread calls rte_cryptodev_enqueue_burst() and
> > > +	 * invokes enqueue callback.
> > > +	 */
> > > +	test_null_burst_operation();
> > > +
> > > +	/* Update quiescent state */
> > > +	rte_rcu_qsbr_quiescent(qsbr, thread_id);
> > > +
> > > +	rte_rcu_qsbr_thread_offline(qsbr, thread_id);
> > > +	rte_rcu_qsbr_thread_unregister(qsbr, thread_id);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int
> > > +test_enq_callback_setup(void)
> > > +{
> > > +	struct crypto_testsuite_params *ts_params = &testsuite_params;
> > > +	struct rte_cryptodev_info dev_info;
> > > +	struct rte_cryptodev_qp_conf qp_conf = {
> > > +		.nb_descriptors = MAX_NUM_OPS_INFLIGHT
> > > +	};
> > > +
> > > +	struct rte_cryptodev_enq_callback *cb;
> > > +	uint16_t max_threads = 2;
> > > +	uint16_t qp_id = 0;
> > > +	struct rte_rcu_qsbr *qsbr;
> > > +	size_t size;
> > > +
> > > +	/* Stop the device in case it's started so it can be configured */
> > > +	rte_cryptodev_stop(ts_params->valid_devs[0]);
> > > +
> > > +	rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
> > > +
> > > +	TEST_ASSERT_SUCCESS(rte_cryptodev_configure(ts_params-
> > > >valid_devs[0],
> > > +			&ts_params->conf),
> > > +			"Failed to configure cryptodev %u",
> > > +			ts_params->valid_devs[0]);
> > > +
> > > +	qp_conf.nb_descriptors = MAX_NUM_OPS_INFLIGHT;
> > > +	qp_conf.mp_session = ts_params->session_mpool;
> > > +	qp_conf.mp_session_private = ts_params->session_priv_mpool;
> > > +
> > > +	TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
> > > +			ts_params->valid_devs[0], qp_id, &qp_conf,
> > > +			rte_cryptodev_socket_id(ts_params-
> > > >valid_devs[0])),
> > > +			"Failed test for "
> > > +			"rte_cryptodev_queue_pair_setup: num_inflights "
> > > +			"%u on qp %u on cryptodev %u",
> > > +			qp_conf.nb_descriptors, qp_id,
> > > +			ts_params->valid_devs[0]);
> > > +
> > > +	cb = rte_cryptodev_add_enq_callback(ts_params->valid_devs[0],
> > > +			qp_id, test_enq_callback, NULL);
> > > +	TEST_ASSERT_NOT_NULL(cb, "Failed test to add callback on "
> > > +			"qp %u on cryptodev %u",
> > > +			qp_id, ts_params->valid_devs[0]);
> > > +
> > > +	/* Create RCU QSBR variable */
> > > +	size = rte_rcu_qsbr_get_memsize(max_threads);
> > > +	qsbr = (struct rte_rcu_qsbr *)rte_zmalloc_socket(NULL, size,
> > > +				RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
> > > +	TEST_ASSERT_NOT_NULL(qsbr, "Failed to allocate memory for
> > > qsbr");
> > > +
> > > +	/* Assign QSBR to cryptodev */
> > > +	TEST_ASSERT_SUCCESS(rte_cryptodev_rcu_qsbr_add(
> > > +			ts_params->valid_devs[0], qsbr),
> > > +			"Failed to setup RCU QSBR for cryptodev %u",
> > > +			ts_params->valid_devs[0]);
> > > +
> > > +	TEST_ASSERT_SUCCESS(rte_rcu_qsbr_init(qsbr, max_threads),
> > > +			"RCU QSBR init failed");
> > > +
> > > +	/* Launch a thread */
> > > +	rte_eal_remote_launch(test_enq_callback_rcu_thread, qsbr,
> > > +				rte_get_next_lcore(-1, 1, 0));
> > > +
> > > +	/* Wait until reader exited. */
> > > +	rte_eal_mp_wait_lcore();
> > > +
> > > +	TEST_ASSERT_SUCCESS(rte_cryptodev_remove_enq_callback(
> > > +			ts_params->valid_devs[0], qp_id, cb),
> > > +			"Failed test to remove callback on "
> > > +			"qp %u on cryptodev %u",
> > > +			qp_id, ts_params->valid_devs[0]);
> > > +
> > > +	return TEST_SUCCESS;
> > > +}
> > > +#endif
> > > +
> > >  static struct unit_test_suite cryptodev_scheduler_testsuite  = {
> > >  	.suite_name = "Crypto Device Scheduler Unit Test Suite",
> > >  	.setup = testsuite_setup,
> > > @@ -11943,7 +12061,10 @@ struct test_crypto_vector {
> > >  				test_queue_pair_descriptor_setup),
> > >  		TEST_CASE_ST(ut_setup, ut_teardown,
> > >
> > > 	test_device_configure_invalid_queue_pair_ids),
> > > -
> > > +#ifdef RTE_CRYPTODEV_CALLBACKS
> > > +		TEST_CASE_ST(ut_setup, ut_teardown,
> > > +				test_enq_callback_setup),
> > > +#endif
> > >  		TEST_CASE_ST(ut_setup, ut_teardown,
> > >  				test_multi_session),
> > >  		TEST_CASE_ST(ut_setup, ut_teardown,
> > > --
> > > 1.9.1



More information about the dev mailing list