[dpdk-dev] [PATCH v2 02/27] event/dlb2: add v2.5 HW init

[Jerin Jacob]

On Wed, Mar 31, 2021 at 1:07 AM Timothy McDaniel
<timothy.mcdaniel at intel.com> wrote:
>
> This commit adds support for DLB v2.5 probe-time hardware init,
> and sets up a framework for incorporating the remaining
> changes required to support DLB v2.5.
>
> DLB v2.0 and DLB v2.5 are similar in many respects, but their
> register offsets and definitions are different. As a result of these,
> differences, the low level hardware functions must take the device
> version into consideration. This requires that the hardware version be
> passed to many of the low level functions, so that the PMD can
> take the appropriate action based on the device version.
>
> To ease the transition and keep the individual patches small, three
> temporary files are added in this commit. These files have "new"
> in their names.  The files with "new" contain changes specific to a
> consolidated PMD that supports both DLB v2.0 and DLB 2.5. Their sister
> files of the same name (minus "new") contain the old DLB v2.0 specific
> code. The intent is to remove code from the original files as that code
> is ported to the combined DLB 2.0/2.5 PMD model and added to the "new"
> files in a series of commits. At end of the patch series, the old files
> will be empty and the "new" files will have the logic needed
> to implement a single PMD that supports both DLB v2.0 and DLB v2.5.
> At that time, the original DLB v2.0 specific files will be deleted,
> and the "new" files will be renamed and replace them.
>
> Signed-off-by: Timothy McDaniel <timothy.mcdaniel at intel.com>
> ---
>  drivers/event/dlb2/dlb2_priv.h                |    5 +
>  drivers/event/dlb2/meson.build                |    1 +
>  .../event/dlb2/pf/base/dlb2_hw_types_new.h    |  362 ++
>  drivers/event/dlb2/pf/base/dlb2_osdep.h       |    4 +
>  drivers/event/dlb2/pf/base/dlb2_regs_new.h    | 4412 +++++++++++++++++
>  drivers/event/dlb2/pf/base/dlb2_resource.c    |  180 +-
>  drivers/event/dlb2/pf/base/dlb2_resource.h    |   36 -
>  .../event/dlb2/pf/base/dlb2_resource_new.c    |  259 +
>  .../event/dlb2/pf/base/dlb2_resource_new.h    |   73 +
>  drivers/event/dlb2/pf/dlb2_main.c             |   41 +-
>  drivers/event/dlb2/pf/dlb2_main.h             |    4 +
>  drivers/event/dlb2/pf/dlb2_pf.c               |    6 +-
>  12 files changed, 5153 insertions(+), 230 deletions(-)
>  create mode 100644 drivers/event/dlb2/pf/base/dlb2_hw_types_new.h
>  create mode 100644 drivers/event/dlb2/pf/base/dlb2_regs_new.h
>  create mode 100644 drivers/event/dlb2/pf/base/dlb2_resource_new.c
>  create mode 100644 drivers/event/dlb2/pf/base/dlb2_resource_new.h
>
> diff --git a/drivers/event/dlb2/dlb2_priv.h b/drivers/event/dlb2/dlb2_priv.h
> index 1cd78ad94..f3a9fe0aa 100644
> --- a/drivers/event/dlb2/dlb2_priv.h
> +++ b/drivers/event/dlb2/dlb2_priv.h
> @@ -114,6 +114,11 @@
>  #define EV_TO_DLB2_PRIO(x) ((x) >> 5)
>  #define DLB2_TO_EV_PRIO(x) ((x) << 5)
>
> +enum dlb2_hw_ver {
> +       DLB2_HW_VER_2,
> +       DLB2_HW_VER_2_5,
> +};
> +
>  enum dlb2_hw_port_types {
>         DLB2_LDB_PORT,
>         DLB2_DIR_PORT,
> diff --git a/drivers/event/dlb2/meson.build b/drivers/event/dlb2/meson.build
> index f22638b8e..bded07e06 100644
> --- a/drivers/event/dlb2/meson.build
> +++ b/drivers/event/dlb2/meson.build
> @@ -14,6 +14,7 @@ sources = files('dlb2.c',
>                 'pf/dlb2_main.c',
>                 'pf/dlb2_pf.c',
>                 'pf/base/dlb2_resource.c',
> +               'pf/base/dlb2_resource_new.c',
>                 'rte_pmd_dlb2.c',
>                 'dlb2_selftest.c'
>  )
> diff --git a/drivers/event/dlb2/pf/base/dlb2_hw_types_new.h b/drivers/event/dlb2/pf/base/dlb2_hw_types_new.h
> new file mode 100644
> index 000000000..d58aa94ad
> --- /dev/null
> +++ b/drivers/event/dlb2/pf/base/dlb2_hw_types_new.h
> @@ -0,0 +1,362 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2016-2020 Intel Corporation
> + */
> +
> +#ifndef __DLB2_HW_TYPES_NEW_H
> +#define __DLB2_HW_TYPES_NEW_H
> +
> +#include "../../dlb2_priv.h"
> +#include "dlb2_user.h"
> +
> +#include "dlb2_osdep_list.h"
> +#include "dlb2_osdep_types.h"
> +#include "dlb2_regs_new.h"
> +
> +#define DLB2_BITS_SET(x, val, mask)    (x = ((x) & ~(mask))     \
> +                                | (((val) << (mask##_LOC)) & (mask)))
> +#define DLB2_BITS_CLR(x, mask) (x &= ~(mask))
> +#define DLB2_BIT_SET(x, mask)  ((x) |= (mask))
> +#define DLB2_BITS_GET(x, mask) (((x) & (mask)) >> (mask##_LOC))
> +
> +#define DLB2_MAX_NUM_VDEVS                     16
> +#define DLB2_MAX_NUM_SEQUENCE_NUMBER_GROUPS    2
> +#define DLB2_NUM_ARB_WEIGHTS                   8
> +#define DLB2_MAX_NUM_AQED_ENTRIES              2048
> +#define DLB2_MAX_WEIGHT                                255
> +#define DLB2_NUM_COS_DOMAINS                   4
> +#define DLB2_MAX_NUM_SEQUENCE_NUMBER_GROUPS    2
> +#define DLB2_MAX_NUM_SEQUENCE_NUMBER_MODES     5
> +#define DLB2_MAX_CQ_COMP_CHECK_LOOPS           409600
> +#define DLB2_MAX_QID_EMPTY_CHECK_LOOPS         (32 * 64 * 1024 * (800 / 30))
> +
> +#define DLB2_FUNC_BAR                          0
> +#define DLB2_CSR_BAR                           2
> +
> +#ifdef FPGA
> +#define DLB2_HZ                                        2000000
> +#else
> +#define DLB2_HZ                                        800000000
> +#endif

Removal of compile-time FPGA constant is not addressed.


>From here (See below)

> +       (ver == DLB2_HW_V2 ? \
> +        DLB2_V2CHP_CFG_LDB_WD_DISABLE1 : \
> +        DLB2_V2_5CHP_CFG_LDB_WD_DISABLE1)

> +
> +#define DLB2_LSP_CFG_CQ_LDB_WU_LIMIT_LIMIT     0x00007FFF
> +#define DLB2_LSP_CFG_CQ_LDB_WU_LIMIT_V 0x00008000
> +#define DLB2_LSP_CFG_CQ_LDB_WU_LIMIT_RSVD0     0xFFFF0000
> +#define DLB2_LSP_CFG_CQ_LDB_WU_LIMIT_LIMIT_LOC 0
> +#define DLB2_LSP_CFG_CQ_LDB_WU_LIMIT_V_LOC             15
> +#define DLB2_LSP_CFG_CQ_LDB_WU_LIMIT_RSVD0_LOC 16

To here(See above). Please move this autogenerated register definition
to a separate patch like "event/dlb2: add HW register definition" or
so