[dpdk-dev] [PATCH] app/testpmd: support the query of link flow ctrl info

Min Hu (Connor) humin29 at huawei.com
Mon Apr 19 10:28:27 CEST 2021


Hi, fixed in v2, thanks

在 2021/4/19 16:04, Li, Xiaoyun 写道:
> Hi
> 
>> -----Original Message-----
>> From: Min Hu (Connor) <humin29 at huawei.com>
>> Sent: Monday, April 19, 2021 14:41
>> To: Li, Xiaoyun <xiaoyun.li at intel.com>; dev at dpdk.org
>> Cc: Yigit, Ferruh <ferruh.yigit at intel.com>
>> Subject: Re: [PATCH] app/testpmd: support the query of link flow ctrl info
>>
>> Hi,
>>
>> 在 2021/4/19 10:53, Li, Xiaoyun 写道:
>>> Hi
>>>
>>>> -----Original Message-----
>>>> From: Min Hu (Connor) <humin29 at huawei.com>
>>>> Sent: Thursday, April 15, 2021 14:47
>>>> To: dev at dpdk.org
>>>> Cc: Yigit, Ferruh <ferruh.yigit at intel.com>; Li, Xiaoyun <xiaoyun.li at intel.com>
>>>> Subject: [PATCH] app/testpmd: support the query of link flow ctrl info
>>>>
>>>> From: Huisong Li <lihuisong at huawei.com>
>>>>
>>>> This patch supports the query of the link flow control parameter on a port.
>>>>
>>>> The command format is as follows:
>>>> show port <port_id> flow_ctrl
>>>>
>>>> Signed-off-by: Huisong Li <lihuisong at huawei.com>
>>>> Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
>>>> ---
>>>>    app/test-pmd/cmdline.c                      | 83
>> +++++++++++++++++++++++++++++
>>>>    doc/guides/testpmd_app_ug/testpmd_funcs.rst |  7 +++
>>>>    2 files changed, 90 insertions(+)
>>>>
>>> <snip>
>>>> +	printf("\n%s Flow control infos for port %-2d %s\n",
>>>> +		info_border, res->port_id, info_border);
>>>> +	printf("FC mode:\n");
>>>> +	printf("   Rx: %s\n", rx_fc_en ? "On" : "Off");
>>>> +	printf("   Tx: %s\n", tx_fc_en ? "On" : "Off");
>>>> +	printf("FC autoneg status: %s\n", fc_conf.autoneg != 0 ? "On" : "Off");
>>>
>>> "fc_conf.autoneg ? "On" : "Off"" is enough like the others in this patch.Got it.
>>>> +	printf("pause_time: 0x%x\n", fc_conf.pause_time);
>>>> +	printf("high_water: 0x%x\n", fc_conf.high_water);
>>>> +	printf("low_water: 0x%x\n", fc_conf.low_water);
>>>> +	printf("Send Xon: %s\n", fc_conf.send_xon ? "On" : "Off");
>>>> +	printf("mac ctrl frame fwd: %s\n",
>>>
>>> Follow others' format will be better like "Send Xon".
>>> "Forward MAC control frames:"
>>> I don not catch  your meaning. Is that right?:
>> change the statement
> 
> I mean change the statement as:
> printf("Send Xon: %s\n", fc_conf.send_xon ? "On" : "Off");
> printf("Forward MAC control frames: %s\n",fc_conf.mac_ctrl_frame_fwd ? "On" : "Off");
> 
> Keep the same format.
> 
>> "
>> +	printf("Send Xon: %s\n", fc_conf.send_xon ? "On" : "Off");
>> +	printf("mac ctrl frame fwd: %s\n",fc_conf.mac_ctrl_frame_fwd ? "On" :
>> "Off")
>> "
>> to
>>
>> "
>> +	printf("Send Xon: %s\n", fc_conf.send_xon ? "On" : "Off");
>> +	printf("Forward MAC control
>> frames: %s\n",fc_conf.mac_ctrl_frame_fwd ?
>> "On" : "Off")
>> "
>>
>>>> +		fc_conf.mac_ctrl_frame_fwd ? "On" : "Off");
>>>> +	printf("\n%s**************   End  ***********%s\n",
>>>> +		info_border, info_border);
>>>> +}
>>>> +
>>> <snip>
>>>>
>>>> --
>>>> 2.7.4
>>>
>>> .
>>>
> .
> 


More information about the dev mailing list