[dpdk-dev] [PATCH v7 2/2] app/testpmd: add support for integrity item
Gregory Etelson
getelson at nvidia.com
Mon Apr 19 10:29:08 CEST 2021
From: Ori Kam <orika at nvidia.com>
The integrity item allows the application to match
on the integrity of a packet.
use example:
match that packet integrity checks are ok. The checks depend on
packet layers. For example ICMP packet will not check L4 level.
flow create 0 ingress pattern integrity value mask 0x01 value spec 0x01
match that L4 packet is ok - check L2 & L3 & L4 layers:
flow create 0 ingress pattern integrity value mask 0xfe value spec 0xfe
Signed-off-by: Ori Kam <orika at nvidia.com>
Signed-off-by: Gregory Etelson <getelson at nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit at intel.com>
---
app/test-pmd/cmdline_flow.c | 39 +++++++++++++++++++++
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 28 +++++++++++++++
2 files changed, 67 insertions(+)
diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 0127d9e7d6..a1b0fa4a32 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -293,6 +293,9 @@ enum index {
ITEM_GENEVE_OPT_TYPE,
ITEM_GENEVE_OPT_LENGTH,
ITEM_GENEVE_OPT_DATA,
+ ITEM_INTEGRITY,
+ ITEM_INTEGRITY_LEVEL,
+ ITEM_INTEGRITY_VALUE,
/* Validate/create actions. */
ACTIONS,
@@ -968,6 +971,7 @@ static const enum index next_item[] = {
ITEM_PFCP,
ITEM_ECPRI,
ITEM_GENEVE_OPT,
+ ITEM_INTEGRITY,
END_SET,
ZERO,
};
@@ -1319,6 +1323,19 @@ static const enum index item_geneve_opt[] = {
ZERO,
};
+static const enum index item_integrity[] = {
+ ITEM_INTEGRITY_LEVEL,
+ ITEM_INTEGRITY_VALUE,
+ ZERO,
+};
+
+static const enum index item_integrity_lv[] = {
+ ITEM_INTEGRITY_LEVEL,
+ ITEM_INTEGRITY_VALUE,
+ ITEM_NEXT,
+ ZERO,
+};
+
static const enum index next_action[] = {
ACTION_END,
ACTION_VOID,
@@ -3400,6 +3417,28 @@ static const struct token token_list[] = {
(sizeof(struct rte_flow_item_geneve_opt),
ITEM_GENEVE_OPT_DATA_SIZE)),
},
+ [ITEM_INTEGRITY] = {
+ .name = "integrity",
+ .help = "match packet integrity",
+ .priv = PRIV_ITEM(INTEGRITY,
+ sizeof(struct rte_flow_item_integrity)),
+ .next = NEXT(item_integrity),
+ .call = parse_vc,
+ },
+ [ITEM_INTEGRITY_LEVEL] = {
+ .name = "level",
+ .help = "integrity level",
+ .next = NEXT(item_integrity_lv, NEXT_ENTRY(UNSIGNED),
+ item_param),
+ .args = ARGS(ARGS_ENTRY(struct rte_flow_item_integrity, level)),
+ },
+ [ITEM_INTEGRITY_VALUE] = {
+ .name = "value",
+ .help = "integrity value",
+ .next = NEXT(item_integrity_lv, NEXT_ENTRY(UNSIGNED),
+ item_param),
+ .args = ARGS(ARGS_ENTRY(struct rte_flow_item_integrity, value)),
+ },
/* Validate/create actions. */
[ACTIONS] = {
.name = "actions",
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index e3bfed566d..feaae9350b 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3791,6 +3791,13 @@ This section lists supported pattern items and their attributes, if any.
- ``s_field {unsigned}``: S field.
- ``seid {unsigned}``: session endpoint identifier.
+- ``integrity``: match packet integrity.
+
+ - ``level {unsigned}``: Packet encapsulation level the item should
+ apply to. See rte_flow_action_rss for details.
+ - ``value {unsigned}``: A bitmask that specify what packet elements
+ must be matched for integrity.
+
Actions list
^^^^^^^^^^^^
@@ -4925,6 +4932,27 @@ NVGRE encapsulation header and sent to port id 0.
testpmd> flow create 0 ingress transfer pattern eth / end actions
sample ratio 1 index 0 / port_id id 2 / end
+Sample integrity rules
+~~~~~~~~~~~~~~~~~~~~~~
+
+Integrity rules can be created by the following commands:
+
+Integrity rule that forwards valid TCP packets to group 1.
+TCP packet integrity is matched with the ``l4_ok`` bit 3.
+
+::
+
+ testpmd> flow create 0 ingress
+ pattern eth / ipv4 / tcp / integrity value mask 8 value spec 8 / end
+ actions jump group 1 / end
+
+Integrity rule that forwards invalid packets to application.
+General packet integrity is matched with the ``packet_ok`` bit 0.
+
+::
+
+ testpmd> flow create 0 ingress pattern integrity value mask 1 value spec 0 / end actions queue index 0 / end
+
BPF Functions
--------------
--
2.25.1
More information about the dev
mailing list