[dpdk-dev] [PATCH v8 0/4] net/mlx5: support meter policy operations
Raslan Darawsheh
rasland at nvidia.com
Tue Apr 27 14:14:28 CEST 2021
Hi,
> -----Original Message-----
> From: Li Zhang <lizh at nvidia.com>
> Sent: Tuesday, April 27, 2021 1:44 PM
> To: dekelp at nvidia.com; Ori Kam <orika at nvidia.com>; Slava Ovsiienko
> <viacheslavo at nvidia.com>; Matan Azrad <matan at nvidia.com>; Shahaf
> Shuler <shahafs at nvidia.com>
> Cc: dev at dpdk.org; NBU-Contact-Thomas Monjalon
> <thomas at monjalon.net>; Raslan Darawsheh <rasland at nvidia.com>; Roni
> Bar Yanai <roniba at nvidia.com>
> Subject: [PATCH v8 0/4] net/mlx5: support meter policy operations
>
> MLX5 PMD checks the validation of actions in policy while add a new meter
> policy, if pass the validation, allocates the new policy object from the meter
> policy indexed memory pool.
>
> It is common to use the same policy for multiple meters.
> MLX5 PMD supports two types of policy: termination policy and no-
> termination policy.
>
> The termination policy must have a fate action as in the policy actions, it can
> support QUEUE, RSS, PORT_ID, DROP, JUMP, MARK and SET_TAG actions if
> policy color is GREEN, also supports DROP action if policy color is RED.
>
> The no-termination policy uses policy ID 0 as default policy, it is created
> internal and cannot be changed by API. The default policy red action is drop,
> green action is jump to suffix table.
> Create this policy by policy API with green/yellow no action, red with drop
> action.
> One example in testpmd command:
> add port meter policy 0 g_actions end y_actions end r_actions drop / end
>
> Depends-on: series=16520 ("Add ASO meter support in MLX5 PMD ")
> https://patchwork.dpdk.org/project/dpdk/list/?series=16520
>
> Depends-on: series=16524 ("Support meter policy API ")
> https://patchwork.dpdk.org/project/dpdk/list/?series=16524
>
> V8:
> * Fix comments about release-note
> v7:
> * Rebase.
> V6:
> * Fix comments about Depends-on.
> V5:
> * Fix comments about destory meter on different ports.
> V4:
> * Fix comments about rte_mtr_meter_policy_add.
> V3:
> * Fix comments about Depends-on.
> V2:
> * Add MLX5_MTR_DEFAULT_POLICY_ID in MLX5 PMD.
>
> Li Zhang (3):
> net/mlx5: support meter policy operations
> net/mlx5: support meter creation with policy
> net/mlx5: prepare sub-policy for a flow with meter
>
> Shun Hao (1):
> net/mlx5: connect meter policy to created flows
>
> doc/guides/nics/mlx5.rst | 12 +
> doc/guides/rel_notes/release_21_05.rst | 1 +
> drivers/net/mlx5/linux/mlx5_os.c | 13 +-
> drivers/net/mlx5/mlx5.c | 77 +-
> drivers/net/mlx5/mlx5.h | 212 ++-
> drivers/net/mlx5/mlx5_flow.c | 654 +++++++-
> drivers/net/mlx5/mlx5_flow.h | 119 +-
> drivers/net/mlx5/mlx5_flow_aso.c | 10 +-
> drivers/net/mlx5/mlx5_flow_dv.c | 1895 ++++++++++++++++++++++--
> drivers/net/mlx5/mlx5_flow_meter.c | 742 +++++++++-
> drivers/net/mlx5/mlx5_trigger.c | 1 +
> 11 files changed, 3373 insertions(+), 363 deletions(-)
>
> --
> 2.27.0
Series applied to next-net-mlx,
And removed v7,
Kindest regards
Raslan Darawsheh
More information about the dev
mailing list