[dpdk-dev] [RFC] app/testpmd: support multi-process

[oulijun]

在 2021/1/12 22:21, Wisam Monther 写道:
> 
> 
>> -----Original Message-----
>> From: oulijun <oulijun at huawei.com>
>> Sent: Tuesday, January 12, 2021 4:13 PM
>> To: Wisam Monther <wisamm at nvidia.com>; ferruh.yigit at intel.com;
>> wenzhuo.lu at intel.com; beilei.xing at intel.com;
>> bernard.iremonger at intel.com
>> Cc: dev at dpdk.org
>> Subject: Re: [dpdk-dev] [RFC] app/testpmd: support multi-process
>>
>>
>>
>> 在 2021/1/10 20:32, Wisam Monther 写道:
>>> Hi,
>>>
>>>> -----Original Message-----
>>>> From: dev <dev-bounces at dpdk.org> On Behalf Of Lijun Ou
>>>> Sent: Friday, January 8, 2021 11:46 AM
>>>> To: ferruh.yigit at intel.com; wenzhuo.lu at intel.com;
>>>> beilei.xing at intel.com; bernard.iremonger at intel.com
>>>> Cc: dev at dpdk.org
>>>> Subject: [dpdk-dev] [RFC] app/testpmd: support multi-process
>>>>
>>>> This patch adds multi-process support for testpmd.
>>>> The test cmd example as follows:
>>>> the primary cmd:
>>>> ./testpmd -w xxx --file-prefix=xx -l 0-1 -n 2 -- -i\
>>>> --rxq=16 --txq=16 --num-procs=2 --proc-id=0 the secondary cmd:
>>>> ./testpmd -w xxx --file-prefix=xx -l 2-3 -n 2 -- -i\
>>>> --rxq=16 --txq=16 --num-procs=2 --proc-id=1
>>>>
>>>> Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
>>>> Signed-off-by: Lijun Ou <oulijun at huawei.com>
>>>> ---
>>>>    app/test-pmd/cmdline.c    |   6 ++-
>>>>    app/test-pmd/config.c     |   9 +++-
>>>>    app/test-pmd/parameters.c |   9 ++++
>>>>    app/test-pmd/testpmd.c    | 133
>> ++++++++++++++++++++++++++++++++--
>>>> ------------
>>>>    app/test-pmd/testpmd.h    |   7 +++
>>>>    5 files changed, 121 insertions(+), 43 deletions(-)
>>>>
>>>
>>> +1 for having this support for testpmd.
>>>
>>> Some questions in my mind:
>>> How are the queues distributing here? In example I see 16 defined, are
>> they for one instance or for all?
>>> Will all processes have same memory region? If installing one RTE_FLOW in
>> one instance will be active for all?
>>> Same question for detaching device in one instance, how it will reflect on
>> others?
>>> There is many other scenarios like this, how it will handle those?
>>>
>> Hi，Wisam Monther
>>     Firstly， thank you for your questions. According to the current
>> implementation scheme, all queues are evenly allocated to different
>> processes based on proc_num and proc_id。
>> The number of receiving queues, number of processes, and process ID are
>> specified for the master and slave processes. After being created by the
>> main process, the sending and receiving queues are evenly distributed to all
>> processes. The following shows the calculation rule for the Testpmd to
>> allocate queues to each process after the proc ID is specified.
>> start(queue start id) = proc_id * nb_q / num_procs；
>> end(queue end id) = start + nb_q / num_procs；
>>
>> For example, if support 16 txq and rxq
>> the 0 ~7 for primary process
>> the 8 ~15 for secondary process
>>
>> all process have the same memory region.
> 
> Ok great, Thanks that' make sense.
> What about the impact of installing RTE_FLOW rule into one instance, does it apply on all? I'm talking about SW side, not HW side?
> The impact of detaching device from secondary/primary only, how it's designed to handle such cases?
> 
It is my understanding that installing RTE_FLOW rule will affect a  
instance from our modification.But the all instance will changed from HW  
side.
If detaching device from secondary only, it will not affect other processes.
>>
>> Thanks
>> Lijun Ou
>>
>>> BRs,
>>> Wisam Jaddo
>>> .
>>>
> .
>