[dpdk-dev] [PATCH v2 04/11] net/octeontx_ep: Added basic device setup.

[Jerin Jacob]

On Mon, Jan 18, 2021 at 3:07 PM Nalla Pradeep <pnalla at marvell.com> wrote:
>
> Functions to setup device, basic IQ and OQ registers are added.
>
> Signed-off-by: Nalla Pradeep <pnalla at marvell.com>
> ---
>  drivers/net/octeontx_ep/meson.build     |   2 +
>  drivers/net/octeontx_ep/otx2_ep_vf.c    | 138 +++++++++++++++++++++
>  drivers/net/octeontx_ep/otx2_ep_vf.h    |  11 ++
>  drivers/net/octeontx_ep/otx_ep_common.h |  92 ++++++++++++++
>  drivers/net/octeontx_ep/otx_ep_ethdev.c |  10 ++
>  drivers/net/octeontx_ep/otx_ep_vf.c     | 154 ++++++++++++++++++++++++
>  drivers/net/octeontx_ep/otx_ep_vf.h     |  33 +++++
>  7 files changed, 440 insertions(+)
>  create mode 100644 drivers/net/octeontx_ep/otx2_ep_vf.c
>  create mode 100644 drivers/net/octeontx_ep/otx2_ep_vf.h
>  create mode 100644 drivers/net/octeontx_ep/otx_ep_vf.c
>
> diff --git a/drivers/net/octeontx_ep/meson.build b/drivers/net/octeontx_ep/meson.build
> index 06663de4e2..7c43c077cf 100644
> --- a/drivers/net/octeontx_ep/meson.build
> +++ b/drivers/net/octeontx_ep/meson.build
> @@ -4,6 +4,8 @@
>
>  sources = files(
>                 'otx_ep_ethdev.c',
> +               'otx_ep_vf.c',
> +               'otx2_ep_vf.c',
>                 )
>
>  extra_flags = []
> diff --git a/drivers/net/octeontx_ep/otx2_ep_vf.c b/drivers/net/octeontx_ep/otx2_ep_vf.c
> new file mode 100644
> index 0000000000..e03d39f7dc
> --- /dev/null
> +++ b/drivers/net/octeontx_ep/otx2_ep_vf.c
> @@ -0,0 +1,138 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(C) 2020 Marvell.
> + */
> +
> +#include "otx2_common.h"
> +#include "otx_ep_common.h"
> +#include "otx2_ep_vf.h"
> +
> +static void
> +otx2_vf_setup_global_iq_reg(struct otx_ep_device *otx_ep, int q_no)
> +{
> +       volatile uint64_t reg_val = 0ull;
> +
> +       /* Select ES, RO, NS, RDSIZE,DPTR Format#0 for IQs
> +        * IS_64B is by default enabled.
> +        */
> +       reg_val = otx2_read64(otx_ep->hw_addr + SDP_VF_R_IN_CONTROL(q_no));
> +
> +       reg_val |= SDP_VF_R_IN_CTL_RDSIZE;
> +       reg_val |= SDP_VF_R_IN_CTL_IS_64B;
> +       reg_val |= SDP_VF_R_IN_CTL_ESR;
> +
> +       otx2_write64(reg_val, otx_ep->hw_addr + SDP_VF_R_IN_CONTROL(q_no));
> +}
> +
> +static void
> +otx2_vf_setup_global_oq_reg(struct otx_ep_device *otx_ep, int q_no)
> +{
> +       volatile uint64_t reg_val = 0ull;
> +
> +       reg_val = otx2_read64(otx_ep->hw_addr + SDP_VF_R_OUT_CONTROL(q_no));
> +
> +#if defined(BUFPTR_ONLY_MODE)

Use devargs instead of compile-time flags.

> +       reg_val &= ~(SDP_VF_R_OUT_CTL_IMODE);
> +#else
> +       reg_val |= (SDP_VF_R_OUT_CTL_IMODE);
> +#endif