[dpdk-dev] [PATCH v2 35/44] net/virtio: improve Virtio-user errors handling
Xia, Chenbo
chenbo.xia at intel.com
Fri Jan 22 09:10:30 CET 2021
> -----Original Message-----
> From: Maxime Coquelin <maxime.coquelin at redhat.com>
> Sent: Wednesday, January 20, 2021 5:25 AM
> To: dev at dpdk.org; Xia, Chenbo <chenbo.xia at intel.com>; olivier.matz at 6wind.com;
> amorenoz at redhat.com; david.marchand at redhat.com
> Cc: Maxime Coquelin <maxime.coquelin at redhat.com>
> Subject: [PATCH v2 35/44] net/virtio: improve Virtio-user errors handling
>
> This patch adds error logs and propagates errors reported
> by the backend. It also adds the device path in error logs
> to make it easier to distinguish which device is facing the
> issue.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin at redhat.com>
> ---
> .../net/virtio/virtio_user/virtio_user_dev.c | 154 ++++++++++++------
> 1 file changed, 104 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/net/virtio/virtio_user/virtio_user_dev.c
> b/drivers/net/virtio/virtio_user/virtio_user_dev.c
> index 33a25f4684..95204ea955 100644
> --- a/drivers/net/virtio/virtio_user/virtio_user_dev.c
> +++ b/drivers/net/virtio/virtio_user/virtio_user_dev.c
> @@ -37,10 +37,15 @@ virtio_user_create_queue(struct virtio_user_dev *dev,
> uint32_t queue_sel)
> * pair.
> */
> struct vhost_vring_file file;
> + int ret;
>
> file.index = queue_sel;
> file.fd = dev->callfds[queue_sel];
> - dev->ops->set_vring_call(dev, &file);
> + ret = dev->ops->set_vring_call(dev, &file);
> + if (ret < 0) {
> + PMD_INIT_LOG(ERR, "(%s) Failed to create queue %u\n", dev->path,
> queue_sel);
> + return -1;
> + }
>
> return 0;
> }
> @@ -48,6 +53,7 @@ virtio_user_create_queue(struct virtio_user_dev *dev,
> uint32_t queue_sel)
> static int
> virtio_user_kick_queue(struct virtio_user_dev *dev, uint32_t queue_sel)
> {
> + int ret;
> struct vhost_vring_file file;
> struct vhost_vring_state state;
> struct vring *vring = &dev->vrings[queue_sel];
> @@ -73,15 +79,21 @@ virtio_user_kick_queue(struct virtio_user_dev *dev,
> uint32_t queue_sel)
>
> state.index = queue_sel;
> state.num = vring->num;
> - dev->ops->set_vring_num(dev, &state);
> + ret = dev->ops->set_vring_num(dev, &state);
> + if (ret < 0)
> + goto err;
>
> state.index = queue_sel;
> state.num = 0; /* no reservation */
> if (dev->features & (1ULL << VIRTIO_F_RING_PACKED))
> state.num |= (1 << 15);
> - dev->ops->set_vring_base(dev, &state);
> + ret = dev->ops->set_vring_base(dev, &state);
> + if (ret < 0)
> + goto err;
>
> - dev->ops->set_vring_addr(dev, &addr);
> + ret = dev->ops->set_vring_addr(dev, &addr);
> + if (ret < 0)
> + goto err;
>
> /* Of all per virtqueue MSGs, make sure VHOST_USER_SET_VRING_KICK comes
> * lastly because vhost depends on this msg to judge if
> @@ -89,9 +101,15 @@ virtio_user_kick_queue(struct virtio_user_dev *dev,
> uint32_t queue_sel)
> */
> file.index = queue_sel;
> file.fd = dev->kickfds[queue_sel];
> - dev->ops->set_vring_kick(dev, &file);
> + ret = dev->ops->set_vring_kick(dev, &file);
> + if (ret < 0)
> + goto err;
>
> return 0;
> +err:
> + PMD_INIT_LOG(ERR, "(%s) Failed to kick queue %u\n", dev->path,
> queue_sel);
> +
> + return -1;
> }
>
> static int
> @@ -103,14 +121,14 @@ virtio_user_queue_setup(struct virtio_user_dev *dev,
> for (i = 0; i < dev->max_queue_pairs; ++i) {
> queue_sel = 2 * i + VTNET_SQ_RQ_QUEUE_IDX;
> if (fn(dev, queue_sel) < 0) {
> - PMD_DRV_LOG(INFO, "setup rx vq fails: %u", i);
> + PMD_DRV_LOG(ERR, "(%s) setup rx vq %u failed", dev->path, i);
> return -1;
> }
> }
> for (i = 0; i < dev->max_queue_pairs; ++i) {
> queue_sel = 2 * i + VTNET_SQ_TQ_QUEUE_IDX;
> if (fn(dev, queue_sel) < 0) {
> - PMD_DRV_LOG(INFO, "setup tx vq fails: %u", i);
> + PMD_DRV_LOG(INFO, "(%s) setup tx vq %u failed", dev->path,
> i);
> return -1;
> }
> }
> @@ -144,7 +162,7 @@ virtio_user_dev_set_features(struct virtio_user_dev *dev)
> ret = dev->ops->set_features(dev, features);
> if (ret < 0)
> goto error;
> - PMD_DRV_LOG(INFO, "set features: %" PRIx64, features);
> + PMD_DRV_LOG(INFO, "(%s) set features: 0x%" PRIx64, dev->path, features);
> error:
> pthread_mutex_unlock(&dev->mutex);
>
> @@ -172,9 +190,10 @@ virtio_user_start_device(struct virtio_user_dev *dev)
> rte_mcfg_mem_read_lock();
> pthread_mutex_lock(&dev->mutex);
>
> + /* Vhost-user client not connected yet, will start later */
> if (dev->backend_type == VIRTIO_USER_BACKEND_VHOST_USER &&
> dev->vhostfd < 0)
> - goto error;
> + goto out;
>
> /* Step 2: share memory regions */
> ret = dev->ops->set_memory_table(dev);
> @@ -182,15 +201,19 @@ virtio_user_start_device(struct virtio_user_dev *dev)
> goto error;
>
> /* Step 3: kick queues */
> - if (virtio_user_queue_setup(dev, virtio_user_kick_queue) < 0)
> + ret = virtio_user_queue_setup(dev, virtio_user_kick_queue);
> + if (ret < 0)
> goto error;
>
> /* Step 4: enable queues
> * we enable the 1st queue pair by default.
> */
> - dev->ops->enable_qp(dev, 0, 1);
> + ret = dev->ops->enable_qp(dev, 0, 1);
> + if (ret < 0)
> + goto error;
>
> dev->started = true;
> +out:
> pthread_mutex_unlock(&dev->mutex);
> rte_mcfg_mem_read_unlock();
>
> @@ -198,6 +221,9 @@ virtio_user_start_device(struct virtio_user_dev *dev)
> error:
> pthread_mutex_unlock(&dev->mutex);
> rte_mcfg_mem_read_unlock();
> +
> + PMD_INIT_LOG(ERR, "(%s) Failed to start device\n", dev->path);
> +
> /* TODO: free resource here or caller to check */
> return -1;
> }
> @@ -206,31 +232,40 @@ int virtio_user_stop_device(struct virtio_user_dev *dev)
> {
> struct vhost_vring_state state;
> uint32_t i;
> - int error = 0;
> + int ret;
>
> pthread_mutex_lock(&dev->mutex);
> if (!dev->started)
> goto out;
>
> - for (i = 0; i < dev->max_queue_pairs; ++i)
> - dev->ops->enable_qp(dev, i, 0);
> + for (i = 0; i < dev->max_queue_pairs; ++i) {
> + ret = dev->ops->enable_qp(dev, i, 0);
> + if (ret < 0)
> + goto err;
> + }
>
> /* Stop the backend. */
> for (i = 0; i < dev->max_queue_pairs * 2; ++i) {
> state.index = i;
> - if (dev->ops->get_vring_base(dev, &state) < 0) {
> - PMD_DRV_LOG(ERR, "get_vring_base failed, index=%u",
> - i);
> - error = -1;
> - goto out;
> + ret = dev->ops->get_vring_base(dev, &state);
> + if (ret < 0) {
> + PMD_DRV_LOG(ERR, "(%s) get_vring_base failed, index=%u",
> dev->path, i);
> + goto err;
> }
> }
>
> dev->started = false;
> +
> out:
> pthread_mutex_unlock(&dev->mutex);
>
> - return error;
> + return 0;
> +err:
> + pthread_mutex_unlock(&dev->mutex);
> +
> + PMD_INIT_LOG(ERR, "(%s) Failed to stop device\n", dev->path);
> +
> + return -1;
> }
>
> static inline void
> @@ -270,13 +305,13 @@ virtio_user_dev_init_notify(struct virtio_user_dev *dev)
> */
> callfd = eventfd(0, EFD_CLOEXEC | EFD_NONBLOCK);
> if (callfd < 0) {
> - PMD_DRV_LOG(ERR, "callfd error, %s", strerror(errno));
> + PMD_DRV_LOG(ERR, "(%s) callfd error, %s", dev->path,
> strerror(errno));
> break;
> }
> kickfd = eventfd(0, EFD_CLOEXEC | EFD_NONBLOCK);
> if (kickfd < 0) {
> close(callfd);
> - PMD_DRV_LOG(ERR, "kickfd error, %s", strerror(errno));
> + PMD_DRV_LOG(ERR, "(%s) kickfd error, %s", dev->path,
> strerror(errno));
> break;
> }
> dev->callfds[i] = callfd;
> @@ -304,7 +339,7 @@ virtio_user_fill_intr_handle(struct virtio_user_dev *dev)
> if (!eth_dev->intr_handle) {
> eth_dev->intr_handle = malloc(sizeof(*eth_dev->intr_handle));
> if (!eth_dev->intr_handle) {
> - PMD_DRV_LOG(ERR, "fail to allocate intr_handle");
> + PMD_DRV_LOG(ERR, "(%s) failed to allocate intr_handle", dev-
> >path);
> return -1;
> }
> memset(eth_dev->intr_handle, 0, sizeof(*eth_dev->intr_handle));
> @@ -335,6 +370,7 @@ virtio_user_mem_event_cb(enum rte_mem_event type
> __rte_unused,
> struct virtio_user_dev *dev = arg;
> struct rte_memseg_list *msl;
> uint16_t i;
> + int ret = 0;
>
> /* ignore externally allocated memory */
> msl = rte_mem_virt2memseg_list(addr);
> @@ -347,18 +383,29 @@ virtio_user_mem_event_cb(enum rte_mem_event type
> __rte_unused,
> goto exit;
>
> /* Step 1: pause the active queues */
> - for (i = 0; i < dev->queue_pairs; i++)
> - dev->ops->enable_qp(dev, i, 0);
> + for (i = 0; i < dev->queue_pairs; i++) {
> + ret = dev->ops->enable_qp(dev, i, 0);
> + if (ret < 0)
> + goto exit;
> + }
>
> /* Step 2: update memory regions */
> - dev->ops->set_memory_table(dev);
> + ret = dev->ops->set_memory_table(dev);
> + if (ret < 0)
> + goto exit;
>
> /* Step 3: resume the active queues */
> - for (i = 0; i < dev->queue_pairs; i++)
> - dev->ops->enable_qp(dev, i, 1);
> + for (i = 0; i < dev->queue_pairs; i++) {
> + ret = dev->ops->enable_qp(dev, i, 1);
> + if (ret < 0)
> + goto exit;
> + }
>
> exit:
> pthread_mutex_unlock(&dev->mutex);
> +
> + if (ret < 0)
> + PMD_DRV_LOG(ERR, "(%s) Failed to update memory table\n", dev-
> >path);
> }
>
> static int
> @@ -388,7 +435,7 @@ virtio_user_dev_setup(struct virtio_user_dev *dev)
> dev->tapfds = malloc(dev->max_queue_pairs *
> sizeof(int));
> if (!dev->vhostfds || !dev->tapfds) {
> - PMD_INIT_LOG(ERR, "Failed to malloc");
> + PMD_INIT_LOG(ERR, "(%s) Failed to allocate FDs", dev-
> >path);
> return -1;
> }
>
> @@ -400,19 +447,25 @@ virtio_user_dev_setup(struct virtio_user_dev *dev)
> VIRTIO_USER_BACKEND_VHOST_VDPA) {
> dev->ops = &virtio_ops_vdpa;
> } else {
> - PMD_DRV_LOG(ERR, "Unknown backend type");
> + PMD_DRV_LOG(ERR, "(%s) Unknown backend type", dev->path);
> return -1;
> }
> }
>
> - if (dev->ops->setup(dev) < 0)
> + if (dev->ops->setup(dev) < 0) {
> + PMD_INIT_LOG(ERR, "(%s) Failed to setup backend\n", dev->path);
> return -1;
> + }
>
> - if (virtio_user_dev_init_notify(dev) < 0)
> + if (virtio_user_dev_init_notify(dev) < 0) {
> + PMD_INIT_LOG(ERR, "(%s) Failed to init notifiers\n", dev->path);
> return -1;
> + }
>
> - if (virtio_user_fill_intr_handle(dev) < 0)
> + if (virtio_user_fill_intr_handle(dev) < 0) {
> + PMD_INIT_LOG(ERR, "(%s) Failed to init interrupt handler\n", dev-
> >path);
> return -1;
> + }
>
> return 0;
> }
> @@ -480,7 +533,7 @@ virtio_user_dev_init(struct virtio_user_dev *dev, char
> *path, int queues,
> }
>
> if (virtio_user_dev_setup(dev) < 0) {
> - PMD_INIT_LOG(ERR, "backend set up fails");
> + PMD_INIT_LOG(ERR, "(%s) backend set up fails", dev->path);
> return -1;
> }
>
> @@ -490,27 +543,31 @@ virtio_user_dev_init(struct virtio_user_dev *dev, char
> *path, int queues,
>
> if (!dev->is_server) {
> if (dev->ops->set_owner(dev) < 0) {
> - PMD_INIT_LOG(ERR, "set_owner fails: %s",
> - strerror(errno));
> + PMD_INIT_LOG(ERR, "(%s) Failed to set backend owner", dev-
> >path);
> return -1;
> }
>
> if (dev->ops->get_features(dev, &dev->device_features) < 0) {
> - PMD_INIT_LOG(ERR, "get_features failed: %s",
> - strerror(errno));
> + PMD_INIT_LOG(ERR, "(%s) Failed to get backend features",
> dev->path);
> return -1;
> }
>
>
> if ((dev->device_features & (1ULL <<
> VHOST_USER_F_PROTOCOL_FEATURES)) ||
> (dev->backend_type == VIRTIO_USER_BACKEND_VHOST_VDPA))
> {
> - if (dev->ops->get_protocol_features(dev, &protocol_features))
> + if (dev->ops->get_protocol_features(dev, &protocol_features))
> {
> + PMD_INIT_LOG(ERR, "(%s) Failed to get backend protocol
> features",
> + dev->path);
> return -1;
> + }
>
> dev->protocol_features &= protocol_features;
>
> - if (dev->ops->set_protocol_features(dev, dev-
> >protocol_features))
> + if (dev->ops->set_protocol_features(dev, dev-
> >protocol_features)) {
> + PMD_INIT_LOG(ERR, "(%s) Failed to set backend protocol
> features",
> + dev->path);
> return -1;
> + }
>
> if (!(dev->protocol_features & (1ULL <<
> VHOST_USER_PROTOCOL_F_MQ)))
> dev->unsupported_features |= (1ull << VIRTIO_NET_F_MQ);
> @@ -577,8 +634,8 @@ virtio_user_dev_init(struct virtio_user_dev *dev, char
> *path, int queues,
> if (rte_mem_event_callback_register(VIRTIO_USER_MEM_EVENT_CLB_NAME,
> virtio_user_mem_event_cb, dev)) {
> if (rte_errno != ENOTSUP) {
> - PMD_INIT_LOG(ERR, "Failed to register mem event"
> - " callback\n");
> + PMD_INIT_LOG(ERR, "(%s) Failed to register mem event
> callback\n",
> + dev->path);
> return -1;
> }
> }
> @@ -631,8 +688,8 @@ virtio_user_handle_mq(struct virtio_user_dev *dev,
> uint16_t q_pairs)
> uint8_t ret = 0;
>
> if (q_pairs > dev->max_queue_pairs) {
> - PMD_INIT_LOG(ERR, "multi-q config %u, but only %u supported",
> - q_pairs, dev->max_queue_pairs);
> + PMD_INIT_LOG(ERR, "(%s) multi-q config %u, but only %u supported",
> + dev->path, q_pairs, dev->max_queue_pairs);
> return -1;
> }
>
> @@ -818,10 +875,8 @@ virtio_user_dev_set_status(struct virtio_user_dev *dev,
> uint8_t status)
> pthread_mutex_lock(&dev->mutex);
> dev->status = status;
> ret = dev->ops->set_status(dev, status);
> - if (ret && ret != -ENOTSUP) {
> - PMD_INIT_LOG(ERR, "Virtio-user set status failed (%d): %s", ret,
> - strerror(errno));
> - }
> + if (ret && ret != -ENOTSUP)
> + PMD_INIT_LOG(ERR, "(%s) Failed to set backend status\n", dev-
> >path);
>
> pthread_mutex_unlock(&dev->mutex);
> return ret;
> @@ -855,8 +910,7 @@ virtio_user_dev_update_status(struct virtio_user_dev *dev)
> !!(dev->status & VIRTIO_CONFIG_STATUS_DEV_NEED_RESET),
> !!(dev->status & VIRTIO_CONFIG_STATUS_FAILED));
> } else if (ret != -ENOTSUP) {
> - PMD_INIT_LOG(ERR, "Virtio-user get status failed (%d): %s", ret,
> - strerror(errno));
> + PMD_INIT_LOG(ERR, "(%s) Failed to get backend status\n", dev-
> >path);
> }
>
> pthread_mutex_unlock(&dev->mutex);
> --
> 2.29.2
Reviewed-by: Chenbo Xia <chenbo.xia at intel.com>
More information about the dev
mailing list