[dpdk-dev] [PATCH v2 26/37] net/mvpp2: introduce fixup for fifo overrun

lironh at marvell.com lironh at marvell.com
Fri Jan 22 20:19:14 CET 2021


From: Liron Himi <lironh at marvell.com>

Currently the HW is configured with only one pool which its
buffer size may be larger than the rx-fifo-size.
In that situation, frame size larger than the fifo-size
is gets dropped due to fifo overrun.
this is cause because the HW works in cut-through mode which
waits to have in the fifo at least the amount of bytes as define
in the smallest pool's buffer size.

This patch add a dummy pool which its buffer size
is very small (smaller than 64B frame). this tricks the HW and
any frame size is gets passed from the FIFO to the PP2.

Signed-off-by: Liron Himi <lironh at marvell.com>
---
 drivers/net/mvpp2/mrvl_ethdev.c | 93 +++++++++++++++++++++++++++------
 drivers/net/mvpp2/mrvl_ethdev.h |  2 +
 drivers/net/mvpp2/mrvl_qos.c    |  1 +
 3 files changed, 81 insertions(+), 15 deletions(-)

diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c
index 12403666b..79e705497 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -90,6 +90,8 @@ static int used_bpools[PP2_NUM_PKT_PROC] = {
 static struct pp2_bpool *mrvl_port_to_bpool_lookup[RTE_MAX_ETHPORTS];
 static int mrvl_port_bpool_size[PP2_NUM_PKT_PROC][PP2_BPOOL_NUM_POOLS][RTE_MAX_LCORE];
 static uint64_t cookie_addr_high = MRVL_COOKIE_ADDR_INVALID;
+static int dummy_pool_id[PP2_NUM_PKT_PROC];
+struct pp2_bpool *dummy_pool[PP2_NUM_PKT_PROC] = {0};
 
 struct mrvl_ifnames {
 	const char *names[PP2_NUM_ETH_PPIO * PP2_NUM_PKT_PROC];
@@ -191,6 +193,52 @@ static struct {
 
 #define MRVL_NUM_XSTATS RTE_DIM(mrvl_xstats_tbl)
 
+static inline int
+mrvl_reserve_bit(int *bitmap, int max)
+{
+	int n = sizeof(*bitmap) * 8 - __builtin_clz(*bitmap);
+
+	if (n >= max)
+		return -1;
+
+	*bitmap |= 1 << n;
+
+	return n;
+}
+
+static int
+mrvl_pp2_fixup_init(void)
+{
+	struct pp2_bpool_params bpool_params;
+	char			name[15];
+	int			err, i;
+
+	memset(dummy_pool, 0, sizeof(dummy_pool));
+	for (i = 0; i < pp2_get_num_inst(); i++) {
+		dummy_pool_id[i] = mrvl_reserve_bit(&used_bpools[i],
+					     PP2_BPOOL_NUM_POOLS);
+		if (dummy_pool_id[i] < 0) {
+			MRVL_LOG(ERR, "Can't find free pool\n");
+			return -1;
+		}
+
+		memset(name, 0, sizeof(name));
+		snprintf(name, sizeof(name), "pool-%d:%d", i, dummy_pool_id[i]);
+		memset(&bpool_params, 0, sizeof(bpool_params));
+		bpool_params.match = name;
+		bpool_params.buff_len = MRVL_PKT_OFFS;
+		bpool_params.dummy_short_pool = 1;
+		err = pp2_bpool_init(&bpool_params, &dummy_pool[i]);
+		if (err != 0 || !dummy_pool[i]) {
+			MRVL_LOG(ERR, "BPool init failed!\n");
+			used_bpools[i] &= ~(1 << dummy_pool_id[i]);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
 /**
  * Initialize packet processor.
  *
@@ -200,7 +248,8 @@ static struct {
 static int
 mrvl_init_pp2(void)
 {
-	struct pp2_init_params init_params;
+	struct pp2_init_params	init_params;
+	int			err;
 
 	memset(&init_params, 0, sizeof(init_params));
 	init_params.hif_reserved_map = MRVL_MUSDK_HIFS_RESERVED;
@@ -209,7 +258,32 @@ mrvl_init_pp2(void)
 	if (mrvl_cfg && mrvl_cfg->pp2_cfg.prs_udfs.num_udfs)
 		memcpy(&init_params.prs_udfs, &mrvl_cfg->pp2_cfg.prs_udfs,
 		       sizeof(struct pp2_parse_udfs));
-	return pp2_init(&init_params);
+	err = pp2_init(&init_params);
+	if (err != 0) {
+		MRVL_LOG(ERR, "PP2 init failed");
+		return -1;
+	}
+
+	err = mrvl_pp2_fixup_init();
+	if (err != 0) {
+		MRVL_LOG(ERR, "PP2 fixup init failed");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void
+mrvl_pp2_fixup_deinit(void)
+{
+	int i;
+
+	for (i = 0; i < PP2_NUM_PKT_PROC; i++) {
+		if (!dummy_pool[i])
+			continue;
+		pp2_bpool_deinit(dummy_pool[i]);
+		used_bpools[i] &= ~(1 << dummy_pool_id[i]);
+	}
 }
 
 /**
@@ -221,6 +295,8 @@ mrvl_init_pp2(void)
 static void
 mrvl_deinit_pp2(void)
 {
+	mrvl_pp2_fixup_deinit();
+
 	pp2_deinit();
 }
 
@@ -261,19 +337,6 @@ mrvl_get_bpool_size(int pp2_id, int pool_id)
 	return size;
 }
 
-static inline int
-mrvl_reserve_bit(int *bitmap, int max)
-{
-	int n = sizeof(*bitmap) * 8 - __builtin_clz(*bitmap);
-
-	if (n >= max)
-		return -1;
-
-	*bitmap |= 1 << n;
-
-	return n;
-}
-
 static int
 mrvl_init_hif(int core_id)
 {
diff --git a/drivers/net/mvpp2/mrvl_ethdev.h b/drivers/net/mvpp2/mrvl_ethdev.h
index 27d34ecfe..b0cdddd15 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.h
+++ b/drivers/net/mvpp2/mrvl_ethdev.h
@@ -196,6 +196,8 @@ extern int mrvl_logtype;
 	rte_log(RTE_LOG_ ## level, mrvl_logtype, "%s(): " fmt "\n", \
 		__func__, ##args)
 
+extern struct pp2_bpool *dummy_pool[PP2_NUM_PKT_PROC];
+
 /**
  * Convert string to uint32_t with extra checks for result correctness.
  *
diff --git a/drivers/net/mvpp2/mrvl_qos.c b/drivers/net/mvpp2/mrvl_qos.c
index 310fd7384..a3add540b 100644
--- a/drivers/net/mvpp2/mrvl_qos.c
+++ b/drivers/net/mvpp2/mrvl_qos.c
@@ -881,6 +881,7 @@ setup_tc(struct pp2_ppio_tc_params *param, uint8_t inqs,
 
 	param->pkt_offset = MRVL_PKT_OFFS;
 	param->pools[0][0] = bpool;
+	param->pools[0][1] = dummy_pool[bpool->pp2_id];
 	param->default_color = color;
 
 	inq_params = rte_zmalloc_socket("inq_params",
-- 
2.28.0



More information about the dev mailing list