[dpdk-dev] [PATCH v2 01/20] crypto/cnxk: add driver skeleton
David Marchand
david.marchand at redhat.com
Thu Jul 8 22:15:43 CEST 2021
On Thu, Jul 8, 2021 at 7:08 PM Ali Alnubani <alialnu at oss.nvidia.com> wrote:
> > -----Original Message-----
> > From: dev <dev-bounces at dpdk.org> On Behalf Of Anoob Joseph
> > Sent: Friday, June 25, 2021 8:56 AM
> > To: Akhil Goyal <gakhil at marvell.com>; NBU-Contact-Thomas Monjalon
> > <thomas at monjalon.net>
> > Cc: Ankur Dwivedi <adwivedi at marvell.com>; Jerin Jacob
> > <jerinj at marvell.com>; Tejasree Kondoj <ktejasree at marvell.com>;
> > dev at dpdk.org; Anoob Joseph <anoobj at marvell.com>; Archana Muniganti
> > <marchana at marvell.com>
> > Subject: [dpdk-dev] [PATCH v2 01/20] crypto/cnxk: add driver skeleton
> >
>
> This patch is causing the following exception with debug mode in main (02edbfab1e):
> """
> meson --werror --buildtype=debug build && ninja -C build
> ...
> ValueError: Buffer size too small (4 instead of at least 12 bytes)
> ...
> """
- Reproduced the issue in Ubuntu 18.04 GHA vms:
FAILED: drivers/rte_crypto_cnxk.pmd.c
/usr/bin/python3 ../buildtools/gen-pmdinfo-cfile.py
/home/runner/work/dpdk/dpdk/build/buildtools ar
/home/runner/work/dpdk/dpdk/build/drivers/libtmp_rte_crypto_cnxk.a
drivers/rte_crypto_cnxk.pmd.c /usr/bin/python3
../buildtools/pmdinfogen.py elf
Traceback (most recent call last):
File "../buildtools/pmdinfogen.py", line 274, in <module>
main()
File "../buildtools/pmdinfogen.py", line 269, in main
drivers = load_drivers(image)
File "../buildtools/pmdinfogen.py", line 203, in load_drivers
drivers.append(Driver.load(image, symbol))
File "../buildtools/pmdinfogen.py", line 157, in load
driver.pci_ids = cls._load_pci_ids(image, pci_table_name_symbol)
File "../buildtools/pmdinfogen.py", line 177, in _load_pci_ids
pci_id = rte_pci_id.from_buffer_copy(data)
ValueError: Buffer size too small (4 instead of at least 12 bytes)
Traceback (most recent call last):
File "../buildtools/gen-pmdinfo-cfile.py", line 20, in <module>
subprocess.run(pmdinfogen + paths + [output], check=True)
File "/usr/lib/python3.6/subprocess.py", line 438, in run
output=stdout, stderr=stderr)
subprocess.CalledProcessError: Command '['/usr/bin/python3',
'../buildtools/pmdinfogen.py', 'elf',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cn9k_cryptodev.c.o',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cn9k_cryptodev_ops.c.o',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cn10k_cryptodev.c.o',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cn10k_cryptodev_ops.c.o',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cn10k_ipsec.c.o',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cnxk_cryptodev.c.o',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cnxk_cryptodev_capabilities.c.o',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cnxk_cryptodev_ops.c.o',
'/home/runner/work/dpdk/dpdk/build/buildtools/tmp1ajyjflf/crypto_cnxk_cnxk_cryptodev_sec.c.o',
'drivers/rte_crypto_cnxk.pmd.c']' returned non-zero exit status 1.
I don't get the relation with the debug mode, but there must be
something different with the pci table symbols for this driver.
My bet is on drivers/crypto/cnxk/cn9k_cryptodev.c:
static struct rte_pci_id pci_id_cpt_table[] = {
{
},
/* sentinel */
{
.device_id = 0
},
};
Adding some pci id, like the cn9k vf cpt pci id, will likely fix the issue.
And as a bonus, this will make this driver actually do something.
- There is also another issue with clang + debug.
This seems rather old, nobody complained.
Fixed with:
Author: David Marchand <david.marchand at redhat.com>
Date: Thu Jul 8 22:10:11 2021 +0200
net/octeontx/base: fix debug build with clang
Remove conflicting declaration of this symbol.
Fixes: d0d654986018 ("net/octeontx: support event Rx adapter")
Cc: stable at dpdk.org
Signed-off-by: David Marchand <david.marchand at redhat.com>
diff --git a/drivers/net/octeontx/base/octeontx_pkivf.h
b/drivers/net/octeontx/base/octeontx_pkivf.h
index d41eaa57ed..8c86841ea6 100644
--- a/drivers/net/octeontx/base/octeontx_pkivf.h
+++ b/drivers/net/octeontx/base/octeontx_pkivf.h
@@ -362,7 +362,6 @@ int octeontx_pki_port_open(int port);
int octeontx_pki_port_hash_config(int port, pki_hash_cfg_t *hash_cfg);
int octeontx_pki_port_pktbuf_config(int port, pki_pktbuf_cfg_t *buf_cfg);
int octeontx_pki_port_create_qos(int port, pki_qos_cfg_t *qos_cfg);
-int octeontx_pki_port_close(int port);
int octeontx_pki_port_errchk_config(int port, pki_errchk_cfg_t *cfg);
int octeontx_pki_port_vlan_fltr_config(int port,
pki_port_vlan_filter_config_t *fltr_cfg);
--
David Marchand
More information about the dev
mailing list