[dpdk-dev] [PATCH v2] net/mlx5: fix meta register conversion for extensive mode
Alexander Kozyrev
akozyrev at nvidia.com
Tue Jul 20 09:51:38 CEST 2021
Register C is used in the extensive metadata mode number 1 and its
width can vary from 0 to 32 bits depending on the kernel usage of it.
There are several issues associated with this mode (dv_xmeta_en=1):
1. The metadata setting assumes that the width is always 16 bits,
which is the most common case in this mode. Use the proper mask.
2. The same is true for the modify_field Flow API. 16-bits width
is hardcoded for dv_xmeta_en=1. Switch to the register C mask width.
3. Metadata is stored in the most significant bits in CQE in this
mode because the registers copy code was not updated during the
metadata conversion to the big-endian format. Update this code to
avoid shifting the metadata in the datapath.
Fixes: b57e414b48 ("net/mlx5: convert meta register to big-endian")
Cc: stable at dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev at nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo at nvidia.com>
---
v2: fixed typo in the commit message
v1: https://patchwork.dpdk.org/project/dpdk/patch/20210720074743.984951-1-akozyrev@nvidia.com/
drivers/net/mlx5/mlx5_flow.c | 4 +-
drivers/net/mlx5/mlx5_flow_dv.c | 96 +++++++++---------------
drivers/net/mlx5/mlx5_rx.c | 3 +-
drivers/net/mlx5/mlx5_rxtx_vec_altivec.h | 22 ++----
drivers/net/mlx5/mlx5_rxtx_vec_neon.h | 22 ++----
drivers/net/mlx5/mlx5_rxtx_vec_sse.h | 22 ++----
6 files changed, 62 insertions(+), 107 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 347e8c1a09..a8973f6bb3 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -1321,9 +1321,7 @@ mlx5_flow_rxq_dynf_metadata_set(struct rte_eth_dev *dev)
data->dynf_meta = 1;
data->flow_meta_mask = rte_flow_dynf_metadata_mask;
data->flow_meta_offset = rte_flow_dynf_metadata_offs;
- data->flow_meta_port_mask = (uint32_t)~0;
- if (priv->config.dv_xmeta_en == MLX5_XMETA_MODE_META16)
- data->flow_meta_port_mask >>= 16;
+ data->flow_meta_port_mask = priv->sh->dv_meta_mask;
}
}
}
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index d250486950..06664abb43 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -1157,29 +1157,10 @@ flow_dv_convert_action_copy_mreg(struct rte_eth_dev *dev,
if (conf->dst == REG_C_0) {
/* Copy to reg_c[0], within mask only. */
reg_dst.offset = rte_bsf32(reg_c0);
- /*
- * Mask is ignoring the enianness, because
- * there is no conversion in datapath.
- */
-#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
- /* Copy from destination lower bits to reg_c[0]. */
- mask = reg_c0 >> reg_dst.offset;
-#else
- /* Copy from destination upper bits to reg_c[0]. */
- mask = reg_c0 << (sizeof(reg_c0) * CHAR_BIT -
- rte_fls_u32(reg_c0));
-#endif
+ mask = rte_cpu_to_be_32(reg_c0 >> reg_dst.offset);
} else {
- mask = rte_cpu_to_be_32(reg_c0);
-#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
- /* Copy from reg_c[0] to destination lower bits. */
reg_dst.offset = 0;
-#else
- /* Copy from reg_c[0] to destination upper bits. */
- reg_dst.offset = sizeof(reg_c0) * CHAR_BIT -
- (rte_fls_u32(reg_c0) -
- rte_bsf32(reg_c0));
-#endif
+ mask = rte_cpu_to_be_32(reg_c0);
}
}
return flow_dv_convert_modify_action(&item,
@@ -1409,7 +1390,7 @@ flow_dv_convert_action_modify_ipv6_dscp
}
static int
-mlx5_flow_item_field_width(struct mlx5_dev_config *config,
+mlx5_flow_item_field_width(struct mlx5_priv *priv,
enum rte_flow_field_id field)
{
switch (field) {
@@ -1456,14 +1437,9 @@ mlx5_flow_item_field_width(struct mlx5_dev_config *config,
case RTE_FLOW_FIELD_TAG:
return 32;
case RTE_FLOW_FIELD_MARK:
- return 24;
+ return __builtin_popcount(priv->sh->dv_mark_mask);
case RTE_FLOW_FIELD_META:
- if (config->dv_xmeta_en == MLX5_XMETA_MODE_META16)
- return 16;
- else if (config->dv_xmeta_en == MLX5_XMETA_MODE_META32)
- return 32;
- else
- return 0;
+ return __builtin_popcount(priv->sh->dv_meta_mask);
case RTE_FLOW_FIELD_POINTER:
case RTE_FLOW_FIELD_VALUE:
return 64;
@@ -1479,12 +1455,11 @@ mlx5_flow_field_id_to_modify_info
struct field_modify_info *info,
uint32_t *mask, uint32_t *value,
uint32_t width, uint32_t dst_width,
- struct rte_eth_dev *dev,
+ uint32_t *shift, struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_dev_config *config = &priv->config;
uint32_t idx = 0;
uint32_t off = 0;
uint64_t val = 0;
@@ -1825,6 +1800,8 @@ mlx5_flow_field_id_to_modify_info
break;
case RTE_FLOW_FIELD_MARK:
{
+ uint32_t mark_mask = priv->sh->dv_mark_mask;
+ uint32_t mark_count = __builtin_popcount(mark_mask);
int reg = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK,
0, error);
if (reg < 0)
@@ -1834,35 +1811,29 @@ mlx5_flow_field_id_to_modify_info
info[idx] = (struct field_modify_info){4, 0,
reg_to_field[reg]};
if (mask)
- mask[idx] =
- rte_cpu_to_be_32(0xffffffff >>
- (32 - width));
+ mask[idx] = rte_cpu_to_be_32((mark_mask >>
+ (mark_count - width)) & mark_mask);
}
break;
case RTE_FLOW_FIELD_META:
{
- unsigned int xmeta = config->dv_xmeta_en;
+ uint32_t meta_mask = priv->sh->dv_meta_mask;
+ uint32_t meta_count = __builtin_popcount(meta_mask);
+ uint32_t msk_c0 =
+ rte_cpu_to_be_32(priv->sh->dv_regc0_mask);
+ uint32_t shl_c0 = rte_bsf32(msk_c0);
int reg = flow_dv_get_metadata_reg(dev, attr, error);
if (reg < 0)
return;
MLX5_ASSERT(reg != REG_NON);
MLX5_ASSERT((unsigned int)reg < RTE_DIM(reg_to_field));
- if (xmeta == MLX5_XMETA_MODE_META16) {
- info[idx] = (struct field_modify_info){2, 0,
- reg_to_field[reg]};
- if (mask)
- mask[idx] = rte_cpu_to_be_16(0xffff >>
- (16 - width));
- } else if (xmeta == MLX5_XMETA_MODE_META32) {
- info[idx] = (struct field_modify_info){4, 0,
- reg_to_field[reg]};
- if (mask)
- mask[idx] =
- rte_cpu_to_be_32(0xffffffff >>
- (32 - width));
- } else {
- MLX5_ASSERT(false);
- }
+ if (reg == REG_C_0)
+ *shift = shl_c0;
+ info[idx] = (struct field_modify_info){4, 0,
+ reg_to_field[reg]};
+ if (mask)
+ mask[idx] = rte_cpu_to_be_32((meta_mask >>
+ (meta_count - width)) & meta_mask);
}
break;
case RTE_FLOW_FIELD_POINTER:
@@ -1889,6 +1860,8 @@ mlx5_flow_field_id_to_modify_info
value[idx] = (uint8_t)val;
val >>= 8;
}
+ if (*shift)
+ value[idx] <<= *shift;
if (!val)
break;
}
@@ -1926,7 +1899,6 @@ flow_dv_convert_action_modify_field
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_dev_config *config = &priv->config;
const struct rte_flow_action_modify_field *conf =
(const struct rte_flow_action_modify_field *)(action->conf);
struct rte_flow_item item;
@@ -1937,27 +1909,31 @@ flow_dv_convert_action_modify_field
uint32_t mask[MLX5_ACT_MAX_MOD_FIELDS] = {0, 0, 0, 0, 0};
uint32_t value[MLX5_ACT_MAX_MOD_FIELDS] = {0, 0, 0, 0, 0};
uint32_t type;
- uint32_t dst_width = mlx5_flow_item_field_width(config,
- conf->dst.field);
+ uint32_t shift = 0;
+ uint32_t dst_width = mlx5_flow_item_field_width(priv, conf->dst.field);
if (conf->src.field == RTE_FLOW_FIELD_POINTER ||
conf->src.field == RTE_FLOW_FIELD_VALUE) {
type = MLX5_MODIFICATION_TYPE_SET;
/** For SET fill the destination field (field) first. */
mlx5_flow_field_id_to_modify_info(&conf->dst, field, mask,
- value, conf->width, dst_width, dev, attr, error);
+ value, conf->width, dst_width,
+ &shift, dev, attr, error);
/** Then copy immediate value from source as per mask. */
mlx5_flow_field_id_to_modify_info(&conf->src, dcopy, mask,
- value, conf->width, dst_width, dev, attr, error);
+ value, conf->width, dst_width,
+ &shift, dev, attr, error);
item.spec = &value;
} else {
type = MLX5_MODIFICATION_TYPE_COPY;
/** For COPY fill the destination field (dcopy) without mask. */
mlx5_flow_field_id_to_modify_info(&conf->dst, dcopy, NULL,
- value, conf->width, dst_width, dev, attr, error);
+ value, conf->width, dst_width,
+ &shift, dev, attr, error);
/** Then construct the source field (field) with mask. */
mlx5_flow_field_id_to_modify_info(&conf->src, field, mask,
- value, conf->width, dst_width, dev, attr, error);
+ value, conf->width, dst_width,
+ &shift, dev, attr, error);
}
item.mask = &mask;
return flow_dv_convert_modify_action(&item,
@@ -4875,9 +4851,9 @@ flow_dv_validate_action_modify_field(struct rte_eth_dev *dev,
struct mlx5_dev_config *config = &priv->config;
const struct rte_flow_action_modify_field *action_modify_field =
action->conf;
- uint32_t dst_width = mlx5_flow_item_field_width(config,
+ uint32_t dst_width = mlx5_flow_item_field_width(priv,
action_modify_field->dst.field);
- uint32_t src_width = mlx5_flow_item_field_width(config,
+ uint32_t src_width = mlx5_flow_item_field_width(priv,
action_modify_field->src.field);
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
diff --git a/drivers/net/mlx5/mlx5_rx.c b/drivers/net/mlx5/mlx5_rx.c
index 8d47637892..e3b1051ba4 100644
--- a/drivers/net/mlx5/mlx5_rx.c
+++ b/drivers/net/mlx5/mlx5_rx.c
@@ -753,8 +753,7 @@ rxq_cq_to_mbuf(struct mlx5_rxq_data *rxq, struct rte_mbuf *pkt,
}
}
if (rxq->dynf_meta) {
- uint32_t meta = rte_be_to_cpu_32(cqe->flow_table_metadata >>
- __builtin_popcount(rxq->flow_meta_port_mask)) &
+ uint32_t meta = rte_be_to_cpu_32(cqe->flow_table_metadata) &
rxq->flow_meta_port_mask;
if (meta) {
diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_altivec.h b/drivers/net/mlx5/mlx5_rxtx_vec_altivec.h
index 101f49b051..68cef1a83e 100644
--- a/drivers/net/mlx5/mlx5_rxtx_vec_altivec.h
+++ b/drivers/net/mlx5/mlx5_rxtx_vec_altivec.h
@@ -1222,32 +1222,26 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cq,
uint64_t flag = rxq->flow_meta_mask;
int32_t offs = rxq->flow_meta_offset;
uint32_t mask = rxq->flow_meta_port_mask;
- uint32_t shift =
- __builtin_popcount(rxq->flow_meta_port_mask);
uint32_t metadata;
/* This code is subject for futher optimization. */
- metadata = (rte_be_to_cpu_32
- (cq[pos].flow_table_metadata) >> shift) &
- mask;
+ metadata = rte_be_to_cpu_32
+ (cq[pos].flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos], offs, uint32_t *) =
metadata;
pkts[pos]->ol_flags |= metadata ? flag : 0ULL;
- metadata = (rte_be_to_cpu_32
- (cq[pos + 1].flow_table_metadata) >> shift) &
- mask;
+ metadata = rte_be_to_cpu_32
+ (cq[pos + 1].flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 1], offs, uint32_t *) =
metadata;
pkts[pos + 1]->ol_flags |= metadata ? flag : 0ULL;
- metadata = (rte_be_to_cpu_32
- (cq[pos + 2].flow_table_metadata) >> shift) &
- mask;
+ metadata = rte_be_to_cpu_32
+ (cq[pos + 2].flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 2], offs, uint32_t *) =
metadata;
pkts[pos + 2]->ol_flags |= metadata ? flag : 0ULL;
- metadata = (rte_be_to_cpu_32
- (cq[pos + 3].flow_table_metadata) >> shift) &
- mask;
+ metadata = rte_be_to_cpu_32
+ (cq[pos + 3].flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 3], offs, uint32_t *) =
metadata;
pkts[pos + 3]->ol_flags |= metadata ? flag : 0ULL;
diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
index 77979c939c..5ff792f4cb 100644
--- a/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
+++ b/drivers/net/mlx5/mlx5_rxtx_vec_neon.h
@@ -832,29 +832,23 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cq,
/* This code is subject for futher optimization. */
int32_t offs = rxq->flow_meta_offset;
uint32_t mask = rxq->flow_meta_port_mask;
- uint32_t shift =
- __builtin_popcount(rxq->flow_meta_port_mask);
*RTE_MBUF_DYNFIELD(pkts[pos], offs, uint32_t *) =
- (rte_be_to_cpu_32(container_of
+ rte_be_to_cpu_32(container_of
(p0, struct mlx5_cqe,
- pkt_info)->flow_table_metadata) >> shift) &
- mask;
+ pkt_info)->flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 1], offs, uint32_t *) =
- (rte_be_to_cpu_32(container_of
+ rte_be_to_cpu_32(container_of
(p1, struct mlx5_cqe,
- pkt_info)->flow_table_metadata) >> shift) &
- mask;
+ pkt_info)->flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 2], offs, uint32_t *) =
- (rte_be_to_cpu_32(container_of
+ rte_be_to_cpu_32(container_of
(p2, struct mlx5_cqe,
- pkt_info)->flow_table_metadata) >> shift) &
- mask;
+ pkt_info)->flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 3], offs, uint32_t *) =
- (rte_be_to_cpu_32(container_of
+ rte_be_to_cpu_32(container_of
(p3, struct mlx5_cqe,
- pkt_info)->flow_table_metadata) >> shift) &
- mask;
+ pkt_info)->flow_table_metadata) & mask;
if (*RTE_MBUF_DYNFIELD(pkts[pos], offs, uint32_t *))
elts[pos]->ol_flags |= rxq->flow_meta_mask;
if (*RTE_MBUF_DYNFIELD(pkts[pos + 1], offs, uint32_t *))
diff --git a/drivers/net/mlx5/mlx5_rxtx_vec_sse.h b/drivers/net/mlx5/mlx5_rxtx_vec_sse.h
index 7fee4355cf..adf991f013 100644
--- a/drivers/net/mlx5/mlx5_rxtx_vec_sse.h
+++ b/drivers/net/mlx5/mlx5_rxtx_vec_sse.h
@@ -769,25 +769,19 @@ rxq_cq_process_v(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cq,
/* This code is subject for futher optimization. */
int32_t offs = rxq->flow_meta_offset;
uint32_t mask = rxq->flow_meta_port_mask;
- uint32_t shift =
- __builtin_popcount(rxq->flow_meta_port_mask);
*RTE_MBUF_DYNFIELD(pkts[pos], offs, uint32_t *) =
- (rte_be_to_cpu_32
- (cq[pos].flow_table_metadata) >> shift) &
- mask;
+ rte_be_to_cpu_32
+ (cq[pos].flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 1], offs, uint32_t *) =
- (rte_be_to_cpu_32
- (cq[pos + p1].flow_table_metadata) >> shift) &
- mask;
+ rte_be_to_cpu_32
+ (cq[pos + p1].flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 2], offs, uint32_t *) =
- (rte_be_to_cpu_32
- (cq[pos + p2].flow_table_metadata) >> shift) &
- mask;
+ rte_be_to_cpu_32
+ (cq[pos + p2].flow_table_metadata) & mask;
*RTE_MBUF_DYNFIELD(pkts[pos + 3], offs, uint32_t *) =
- (rte_be_to_cpu_32
- (cq[pos + p3].flow_table_metadata) >> shift) &
- mask;
+ rte_be_to_cpu_32
+ (cq[pos + p3].flow_table_metadata) & mask;
if (*RTE_MBUF_DYNFIELD(pkts[pos], offs, uint32_t *))
pkts[pos]->ol_flags |= rxq->flow_meta_mask;
if (*RTE_MBUF_DYNFIELD(pkts[pos + 1], offs, uint32_t *))
--
2.18.2
More information about the dev
mailing list