[dpdk-dev] [PATCH 3/3] app/testpmd: fix mixed use of RX/Rx/TX/Tx in testpmd

[Li, Xiaoyun]

Hi

> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Lijun Ou
> Sent: Friday, March 5, 2021 08:56
> To: Yigit, Ferruh <ferruh.yigit at intel.com>
> Cc: dev at dpdk.org; linuxarm at openeuler.org
> Subject: [dpdk-dev] [PATCH 3/3] app/testpmd: fix mixed use of RX/Rx/TX/Tx in
> testpmd
> 
> From: Hongbo Zheng <zhenghongbo3 at huawei.com>
> 
> In testpmd, when we input "show config rxtx", we can see like this:
> 
> 1: testpmd> show config rxtx
> 2:   io packet forwarding packets/burst=32
> 3:   nb forwarding cores=1 - nb forwarding ports=1
> 4:   port 0: RX queue number: 1 Tx queue number: 1
> 5:     Rx offloads=0x0 Tx offloads=0x10000
> 6:     RX queue: 0
> 7:       RX desc=1024 - RX free threshold=32
> 8:       RX threshold registers: pthresh=0 hthresh=0  wthresh=0
> 9:       RX Offloads=0x0
> 10:    TX queue: 0
> 11:      TX desc=1024 - TX free threshold=928
> 12:      TX threshold registers: pthresh=0 hthresh=0  wthresh=0
> 13:      TX offloads=0x10000 - TX RS bit threshold=32
> 
> In line 4, RX/Tx is mixed used. Also in other lines, RX/Rx/TX/Tx is mixed used.

If you're going to unify the print to only use "Rx/Tx" in testpmd as your title said.
There're a lot of more places using RX/TX when printing. You should change them too.

> 
> This patch fix the mixed use of RX/Rx/TX/Tx in testpmd command "show config
> rxtx" output by change to unified use Rx/Tx.
> 
> Signed-off-by: Hongbo Zheng <zhenghongbo3 at huawei.com>
> Signed-off-by: Lijun Ou <oulijun at huawei.com>
> ---
>  app/test-pmd/config.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index
> 576d5ac..2435c26 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -2505,7 +2505,7 @@ rxtx_config_display(void)
>  		int32_t rc;
> 
>  		/* per port config */
> -		printf("  port %d: RX queue number: %d Tx queue
> number: %d\n",
> +		printf("  port %d: Rx queue number: %d Tx queue number: %d\n",
>  				(unsigned int)pid, nb_rxq, nb_txq);
> 
>  		printf("    Rx offloads=0x%"PRIx64" Tx offloads=0x%"PRIx64"\n",
> @@ -2533,13 +2533,13 @@ rxtx_config_display(void)
>  				offloads_tmp = rx_qinfo.conf.offloads;
>  			}
> 
> -			printf("    RX queue: %d\n", qid);
> -			printf("      RX desc=%d - RX free threshold=%d\n",
> +			printf("    Rx queue: %d\n", qid);
> +			printf("      Rx desc=%d - Rx free threshold=%d\n",
>  				nb_rx_desc_tmp, rx_free_thresh_tmp);
> -			printf("      RX threshold registers: pthresh=%d
> hthresh=%d "
> +			printf("      Rx threshold registers: pthresh=%d
> hthresh=%d "
>  				" wthresh=%d\n",
>  				pthresh_tmp, hthresh_tmp, wthresh_tmp);
> -			printf("      RX Offloads=0x%"PRIx64"\n", offloads_tmp);
> +			printf("      Rx Offloads=0x%"PRIx64"\n", offloads_tmp);
>  		}
> 
>  		/* per tx queue config only for first queue to be less verbose */
> @@ -2565,13 +2565,13 @@ rxtx_config_display(void)
>  				tx_rs_thresh_tmp = tx_qinfo.conf.tx_rs_thresh;
>  			}
> 
> -			printf("    TX queue: %d\n", qid);
> -			printf("      TX desc=%d - TX free threshold=%d\n",
> +			printf("    Tx queue: %d\n", qid);
> +			printf("      Tx desc=%d - Tx free threshold=%d\n",
>  				nb_tx_desc_tmp, tx_free_thresh_tmp);
> -			printf("      TX threshold registers: pthresh=%d
> hthresh=%d "
> +			printf("      Tx threshold registers: pthresh=%d
> hthresh=%d "
>  				" wthresh=%d\n",
>  				pthresh_tmp, hthresh_tmp, wthresh_tmp);
> -			printf("      TX offloads=0x%"PRIx64" - TX RS bit
> threshold=%d\n",
> +			printf("      Tx offloads=0x%"PRIx64" - Tx RS bit
> threshold=%d\n",
>  				offloads_tmp, tx_rs_thresh_tmp);
>  		}
>  	}
> --
> 2.7.4