[dpdk-dev] [PATCH v4 2/8] eventdev: introduce event vector Rx capability

[Jerin Jacob]

On Sat, Mar 20, 2021 at 2:27 AM <pbhagavatula at marvell.com> wrote:
>
> From: Pavan Nikhilesh <pbhagavatula at marvell.com>
>
> Introduce event ethernet Rx adapter event vector capability.
>
> If an event eth Rx adapter has the capability of
> RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR then a given Rx queue
> can be configured to enable event vectorization by passing the
> flag RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR to
> rte_event_eth_rx_adapter_queue_conf::rx_queue_flags while configuring
> Rx adapter through rte_event_eth_rx_adapter_queue_add.

through rte_event_eth_rx_adapter_queue_add()

>
> The max vector size, vector timeout define the vector size and
> mempool used for allocating vector event are configured through
> rte_event_eth_rx_adapter_queue_add. The element size of the element
> in the vector pool should be equal to
>     sizeof(struct rte_event_vector) + (vector_sz * sizeof(uintptr_t))
>
> Application can use `rte_event_vector_pool_create` to create the
> vector mempool used for
> rte_event_eth_rx_adapter_queue_conf::vector_mp.
>
> The Rx adapter would be responsible for vectorizing the mbufs
> based on the flow, the vector limits configured by the application
> and add the vector event of mbufs to the event queue set via
> rte_event_eth_rx_adapter_queue_conf::ev::queue_id.
> It should also mark rte_event_vector::union_valid and fill
> rte_event_vector::port, rte_event_vector::queue.
>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula at marvell.com>


Please find below some comments.
Feel free to add Acked-by: Jerin Jacob <jerinj at marvell.com> after
addressing those and Ray's comment.


> ---
>  .../prog_guide/event_ethernet_rx_adapter.rst  | 38 ++++++++
>  .../rte_event_eth_rx_adapter.h                | 95 +++++++++++++++++++
>  lib/librte_eventdev/rte_eventdev.h            | 30 +++++-
>  lib/librte_eventdev/version.map               |  2 +
>  4 files changed, 163 insertions(+), 2 deletions(-)
>

>  /**
>   * A structure used to retrieve statistics for an eth rx adapter instance.
>   */
> @@ -199,6 +233,22 @@ struct rte_event_eth_rx_adapter_stats {
>         /**< Received packet count for interrupt mode Rx queues */
>  };
>
> +/**
> + * A structure used to retrieve eth rx adapter vector limits.
> + */
> +struct rte_event_eth_rx_adapter_vector_limits {
> +       uint16_t min_sz;
> +       /**< Minimum vector limit configurable. */

Please add @see to rte_event_eth_rx_adapter_event_vector_config::vector_sz

> +       uint16_t max_sz;

Please add @see to rte_event_eth_rx_adapter_event_vector_config::vector_sz

> +       /**< Maximum vector limit configurable. */
> +       uint8_t log2_sz;

I think, we can change to bool and comment as "True if  the size
configured should be in log2"

Please add @see to rte_event_eth_rx_adapter_event_vector_config::vector_sz


> +       /**< The size configured should be in log2. */
> +       uint64_t min_timeout_ns;
> +       /**< Minimum vector timeout configurable. */

Please add @see to
rte_event_eth_rx_adapter_event_vector_config::vector_timeout_ns

> +       uint64_t max_timeout_ns;
> +       /**< Maximum vector timeout configurable. */

Please add @see to
rte_event_eth_rx_adapter_event_vector_config::vector_timeout_ns

> +};
> +
>  /**
>   *
>   * Callback function invoked by the SW adapter before it continues
> @@ -467,6 +517,51 @@ int rte_event_eth_rx_adapter_cb_register(uint8_t id, uint16_t eth_dev_id,
>                                          rte_event_eth_rx_adapter_cb_fn cb_fn,
>                                          void *cb_arg);
>
> +/**
> + * Retrieve vector limits for a given event dev and eth dev pair.
> + * @see rte_event_eth_rx_adapter_vector_limits
> + *
> + * @param dev_id
> + *  Event device identifier.
> + * @param eth_port_id
> + *  Port identifier of the ethernet device.
> + * @param [out] limits
> + *  A pointer to rte_event_eth_rx_adapter_vector_limits structure that has to
> + * be filled.
> + *
> + * @return
> + *  - 0: Success.
> + *  - <0: Error code on failure.
> + */
> +__rte_experimental
> +int rte_event_eth_rx_adapter_vector_limits_get(
> +       uint8_t dev_id, uint16_t eth_port_id,
> +       struct rte_event_eth_rx_adapter_vector_limits *limits);
> +
> +/**
> + * Configure event vectorization for a given ethernet device queue, that has
> + * been added to a event eth Rx adapter.
> + *
> + * @param id
> + *  The identifier of the ethernet Rx event adapter.
> + *
> + * @param eth_dev_id
> + *  The identifier of the ethernet device.
> + *
> + * @param rx_queue_id
> + *  Ethernet device receive queue index.
> + *  If rx_queue_id is -1, then all Rx queues configured for the ethernet device
> + *  are configured with event vectorization.
> + *
> + * @return
> + *  - 0: Success, Receive queue configured correctly.
> + *  - <0: Error code on failure.
> + */
> +__rte_experimental
> +int rte_event_eth_rx_adapter_queue_event_vector_config(
> +       uint8_t id, uint16_t eth_dev_id, int32_t rx_queue_id,
> +       struct rte_event_eth_rx_adapter_event_vector_config *config);
> +
>  #ifdef __cplusplus
>  }
>  #endif
> diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
> index 5586a3f15..1be79b856 100644
> --- a/lib/librte_eventdev/rte_eventdev.h
> +++ b/lib/librte_eventdev/rte_eventdev.h
> @@ -919,9 +919,27 @@ rte_event_dev_close(uint8_t dev_id);
>   * Event vector structure.
>   */
>  struct rte_event_vector {
> -       uint64_t nb_elem : 16;
> +       uint16_t nb_elem;
>         /**< Number of elements in this event vector. */
> -       uint64_t rsvd : 48;
> +       uint16_t rsvd : 15;
> +       uint16_t attr_valid : 1;
> +       /**< Indicates that the below union attributes have valid information.
> +        */
> +       union {
> +               /* Used by Rx adapter.
> +                * Indicats that all the elements in this vector belong to same

Indicats -> Indicates
to same -> to the same

> +                * port and queue pair when originating from Rx adapter, valid
> +                * only when event type is ETHDEV_VECTOR or
> +                * ETH_RX_ADAPTER_VECTOR.
> +                */
> +               struct {
> +                       uint16_t port;
> +                       /* Ethernet device port id. */
> +                       uint16_t queue;
> +                       /* Ethernet device queue id. */
> +               };
> +       };
> +       /**< Union to hold common attributes of the vector array. */
>         uint64_t impl_opaque;
>         union {
>                 struct rte_mbuf *mbufs[0];
> @@ -1019,8 +1037,14 @@ struct rte_event_vector {
>   *             // Classify and handle event.
>   *     }
>   */
> +#define RTE_EVENT_TYPE_ETHDEV_VECTOR                                           \
> +       (RTE_EVENT_TYPE_VECTOR | RTE_EVENT_TYPE_ETHDEV)
> +/**< The event vector generated from ethdev subsystem */
>  #define RTE_EVENT_TYPE_CPU_VECTOR (RTE_EVENT_TYPE_VECTOR | RTE_EVENT_TYPE_CPU)
>  /**< The event vector generated from cpu for pipelining. */
> +#define RTE_EVENT_TYPE_ETH_RX_ADAPTER_VECTOR                                   \
> +       (RTE_EVENT_TYPE_VECTOR | RTE_EVENT_TYPE_ETH_RX_ADAPTER)
> +/**< The event vector generated from eth Rx adapter. */
>
>  #define RTE_EVENT_TYPE_MAX              0x10
>  /**< Maximum number of event types */
> @@ -1165,6 +1189,8 @@ struct rte_event {
>   * @see struct rte_event_eth_rx_adapter_queue_conf::ev
>   * @see struct rte_event_eth_rx_adapter_queue_conf::rx_queue_flags
>   */
> +#define RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR      0x8
> +/**< Adapter supports event vectorization per ethdev. */
>
>  /**
>   * Retrieve the event device's ethdev Rx adapter capabilities for the
> diff --git a/lib/librte_eventdev/version.map b/lib/librte_eventdev/version.map
> index a070ef56e..902df0ae3 100644
> --- a/lib/librte_eventdev/version.map
> +++ b/lib/librte_eventdev/version.map
> @@ -141,6 +141,8 @@ EXPERIMENTAL {
>
>         #added in 21.05
>         rte_event_vector_pool_create;
> +       rte_event_eth_rx_adapter_vector_limits_get;
> +       rte_event_eth_rx_adapter_queue_event_vector_config;
>  };
>
>  INTERNAL {
> --
> 2.17.1
>