[dpdk-dev] [dpdk-dev v21.11] [PATCH v5 8/8] eventdev: simplify Rx adapter event vector config

Pavan Nikhilesh Bhagavatula pbhagavatula at marvell.com
Thu Mar 25 14:55:16 CET 2021


>> From: pbhagavatula at marvell.com <pbhagavatula at marvell.com>
>> Sent: Wednesday, March 24, 2021 10:35 AM
>> To: jerinj at marvell.com; Jayatheerthan, Jay
><jay.jayatheerthan at intel.com>; Carrillo, Erik G
><erik.g.carrillo at intel.com>; Gujjar,
>> Abhinandan S <abhinandan.gujjar at intel.com>; McDaniel, Timothy
><timothy.mcdaniel at intel.com>; hemant.agrawal at nxp.com; Van
>> Haaren, Harry <harry.van.haaren at intel.com>; mattias.ronnblom
><mattias.ronnblom at ericsson.com>; Ma, Liang J
>> <liang.j.ma at intel.com>; Ray Kinsella <mdr at ashroe.eu>; Neil Horman
><nhorman at tuxdriver.com>
>> Cc: dev at dpdk.org; Pavan Nikhilesh <pbhagavatula at marvell.com>
>> Subject: [dpdk-dev v21.11] [PATCH v5 8/8] eventdev: simplify Rx
>adapter event vector config
>>
>> From: Pavan Nikhilesh <pbhagavatula at marvell.com>
>>
>> Include vector configuration into the structure
>> ``rte_event_eth_rx_adapter_queue_conf`` used when configuring rest
>> of the Rx adapter ethernet device Rx queue parameters.
>> This simplifies event vector configuration as it avoids splitting
>> configuration per Rx queue.
>>
>> Signed-off-by: Pavan Nikhilesh <pbhagavatula at marvell.com>
>> ---
>>  app/test-eventdev/test_pipeline_common.c      |  16 +-
>>  lib/librte_eventdev/eventdev_pmd.h            |  29 ---
>>  .../rte_event_eth_rx_adapter.c                | 168 ++++++------------
>>  .../rte_event_eth_rx_adapter.h                |  27 ---
>>  lib/librte_eventdev/version.map               |   1 -
>>  5 files changed, 57 insertions(+), 184 deletions(-)
>>
>> diff --git a/app/test-eventdev/test_pipeline_common.c b/app/test-
>eventdev/test_pipeline_common.c
>> index d5ef90500..76aee254b 100644
>> --- a/app/test-eventdev/test_pipeline_common.c
>> +++ b/app/test-eventdev/test_pipeline_common.c
>> @@ -331,7 +331,6 @@ pipeline_event_rx_adapter_setup(struct
>evt_options *opt, uint8_t stride,
>>  	uint16_t prod;
>>  	struct rte_mempool *vector_pool = NULL;
>>  	struct rte_event_eth_rx_adapter_queue_conf queue_conf;
>> -	struct rte_event_eth_rx_adapter_event_vector_config
>vec_conf;
>>
>>  	memset(&queue_conf, 0,
>>  			sizeof(struct
>rte_event_eth_rx_adapter_queue_conf));
>> @@ -397,8 +396,12 @@ pipeline_event_rx_adapter_setup(struct
>evt_options *opt, uint8_t stride,
>>  			}
>>
>>  			if (cap &
>RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR) {
>> +				queue_conf.vector_sz = opt-
>>vector_size;
>> +				queue_conf.vector_timeout_ns =
>> +					opt->vector_tmo_nsec;
>>  				queue_conf.rx_queue_flags |=
>>
>	RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR;
>> +				queue_conf.vector_mp = vector_pool;
>>  			} else {
>>  				evt_err("Rx adapter doesn't support
>event vector");
>>  				return -EINVAL;
>> @@ -418,17 +421,6 @@ pipeline_event_rx_adapter_setup(struct
>evt_options *opt, uint8_t stride,
>>  			return ret;
>>  		}
>>
>> -		if (opt->ena_vector) {
>> -			vec_conf.vector_sz = opt->vector_size;
>> -			vec_conf.vector_timeout_ns = opt-
>>vector_tmo_nsec;
>> -			vec_conf.vector_mp = vector_pool;
>> -			if
>(rte_event_eth_rx_adapter_queue_event_vector_config(
>> -				    prod, prod, -1, &vec_conf) < 0) {
>> -				evt_err("Failed to configure event
>vectorization for Rx adapter");
>> -				return -EINVAL;
>> -			}
>> -		}
>> -
>>  		if (!(cap &
>RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT)) {
>>  			uint32_t service_id = -1U;
>>
>> diff --git a/lib/librte_eventdev/eventdev_pmd.h
>b/lib/librte_eventdev/eventdev_pmd.h
>> index 0f724ac85..63b3bc4b5 100644
>> --- a/lib/librte_eventdev/eventdev_pmd.h
>> +++ b/lib/librte_eventdev/eventdev_pmd.h
>> @@ -667,32 +667,6 @@ typedef int
>(*eventdev_eth_rx_adapter_vector_limits_get_t)(
>>  	const struct rte_eventdev *dev, const struct rte_eth_dev
>*eth_dev,
>>  	struct rte_event_eth_rx_adapter_vector_limits *limits);
>>
>> -struct rte_event_eth_rx_adapter_event_vector_config;
>> -/**
>> - * Enable event vector on an given Rx queue of a ethernet devices
>belonging to
>> - * the Rx adapter.
>> - *
>> - * @param dev
>> - *   Event device pointer
>> - *
>> - * @param eth_dev
>> - *   Ethernet device pointer
>> - *
>> - * @param rx_queue_id
>> - *   The Rx queue identifier
>> - *
>> - * @param config
>> - *   Pointer to the event vector configuration structure.
>> - *
>> - * @return
>> - *   - 0: Success.
>> - *   - <0: Error code returned by the driver function.
>> - */
>> -typedef int (*eventdev_eth_rx_adapter_event_vector_config_t)(
>> -	const struct rte_eventdev *dev, const struct rte_eth_dev
>*eth_dev,
>> -	int32_t rx_queue_id,
>> -	const struct rte_event_eth_rx_adapter_event_vector_config
>*config);
>> -
>>  typedef uint32_t rte_event_pmd_selftest_seqn_t;
>>  extern int rte_event_pmd_selftest_seqn_dynfield_offset;
>>
>> @@ -1118,9 +1092,6 @@ struct rte_eventdev_ops {
>>  	eventdev_eth_rx_adapter_vector_limits_get_t
>>  		eth_rx_adapter_vector_limits_get;
>>  	/**< Get event vector limits for the Rx adapter */
>> -	eventdev_eth_rx_adapter_event_vector_config_t
>> -		eth_rx_adapter_event_vector_config;
>> -	/**< Configure Rx adapter with event vector */
>>
>>  	eventdev_timer_adapter_caps_get_t timer_adapter_caps_get;
>>  	/**< Get timer adapter capabilities */
>> diff --git a/lib/librte_eventdev/rte_event_eth_rx_adapter.c
>b/lib/librte_eventdev/rte_event_eth_rx_adapter.c
>> index c71990078..a1990637f 100644
>> --- a/lib/librte_eventdev/rte_event_eth_rx_adapter.c
>> +++ b/lib/librte_eventdev/rte_event_eth_rx_adapter.c
>> @@ -1882,6 +1882,25 @@ rxa_add_queue(struct
>rte_event_eth_rx_adapter *rx_adapter,
>>  	} else
>>  		qi_ev->flow_id = 0;
>>
>> +	if (conf->rx_queue_flags &
>> +	    RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR) {
>> +		queue_info->ena_vector = 1;
>> +		qi_ev->event_type =
>RTE_EVENT_TYPE_ETH_RX_ADAPTER_VECTOR;
>> +		rxa_set_vector_data(queue_info, conf->vector_sz,
>> +				    conf->vector_timeout_ns, conf-
>>vector_mp,
>> +				    rx_queue_id, dev_info->dev->data-
>>port_id);
>> +		rx_adapter->ena_vector = 1;
>> +		rx_adapter->vector_tmo_ticks =
>> +			rx_adapter->vector_tmo_ticks
>> +				? RTE_MIN(queue_info->vector_data
>> +						  .vector_timeout_ticks,
>> +					  rx_adapter-
>>vector_tmo_ticks)
>> +				: queue_info-
>>vector_data.vector_timeout_ticks;
>> +		rx_adapter->vector_tmo_ticks <<= 1;
>
>Any reason why we left shift here ? Applicable in patch 4/8 as well.

Just so that we have half the precision of the lowest timeout, helps to 
Maintain accuracy.

>
>> +		TAILQ_INIT(&rx_adapter->vector_list);
>
>Can doing TAILQ_INIT every time a queue is added cause existing
>elements to be wiped out ? Applicable in patch 4/8 as well.

I don't think queues can be added when adapter is already started
rxa_sw_add Isn't thready safe.

>
>> +		rx_adapter->prev_expiry_ts = 0;
>
>Can setting this every time a queue is added affect existing queues
>created with vector support and passing traffic ? Applicable in patch 4/8
>as well.

Same as above.

>
>> +	}
>> +
>>  	rxa_update_queue(rx_adapter, dev_info, rx_queue_id, 1);
>>  	if (rxa_polled_queue(dev_info, rx_queue_id)) {
>>  		rx_adapter->num_rx_polled += !pollq;
>> @@ -1907,44 +1926,6 @@ rxa_add_queue(struct
>rte_event_eth_rx_adapter *rx_adapter,
>>  	}
>>  }
>>
>> -static void
>> -rxa_sw_event_vector_configure(
>> -	struct rte_event_eth_rx_adapter *rx_adapter, uint16_t
>eth_dev_id,
>> -	int rx_queue_id,
>> -	const struct rte_event_eth_rx_adapter_event_vector_config
>*config)
>> -{
>> -	struct eth_device_info *dev_info = &rx_adapter-
>>eth_devices[eth_dev_id];
>> -	struct eth_rx_queue_info *queue_info;
>> -	struct rte_event *qi_ev;
>> -
>> -	if (rx_queue_id == -1) {
>> -		uint16_t nb_rx_queues;
>> -		uint16_t i;
>> -
>> -		nb_rx_queues = dev_info->dev->data->nb_rx_queues;
>> -		for (i = 0; i < nb_rx_queues; i++)
>> -			rxa_sw_event_vector_configure(rx_adapter,
>eth_dev_id, i,
>> -						      config);
>> -		return;
>> -	}
>> -
>> -	queue_info = &dev_info->rx_queue[rx_queue_id];
>> -	qi_ev = (struct rte_event *)&queue_info->event;
>> -	queue_info->ena_vector = 1;
>> -	qi_ev->event_type =
>RTE_EVENT_TYPE_ETH_RX_ADAPTER_VECTOR;
>> -	rxa_set_vector_data(queue_info, config->vector_sz,
>> -			    config->vector_timeout_ns, config-
>>vector_mp,
>> -			    rx_queue_id, dev_info->dev->data->port_id);
>> -	rx_adapter->ena_vector = 1;
>> -	rx_adapter->vector_tmo_ticks =
>> -		rx_adapter->vector_tmo_ticks ?
>> -			      RTE_MIN(config->vector_timeout_ns << 1,
>> -				      rx_adapter->vector_tmo_ticks) :
>> -			      config->vector_timeout_ns << 1;
>> -	rx_adapter->prev_expiry_ts = 0;
>> -	TAILQ_INIT(&rx_adapter->vector_list);
>> -}
>> -
>>  static int rxa_sw_add(struct rte_event_eth_rx_adapter *rx_adapter,
>>  		uint16_t eth_dev_id,
>>  		int rx_queue_id,
>> @@ -2258,6 +2239,7 @@
>rte_event_eth_rx_adapter_queue_add(uint8_t id,
>>  	struct rte_event_eth_rx_adapter *rx_adapter;
>>  	struct rte_eventdev *dev;
>>  	struct eth_device_info *dev_info;
>> +	struct rte_event_eth_rx_adapter_vector_limits limits;
>>
>>  	RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_ERR_RET(id, -
>EINVAL);
>>  	RTE_ETH_VALID_PORTID_OR_ERR_RET(eth_dev_id, -EINVAL);
>> @@ -2294,6 +2276,39 @@
>rte_event_eth_rx_adapter_queue_add(uint8_t id,
>>  		return -EINVAL;
>>  	}
>>
>> +	if (queue_conf->rx_queue_flags &
>> +	    RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR) {
>
>Perhaps, you could move the previous if condition here and just check
>for (cap & RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR)

No, the above check is not a capability check, it is to check if application
requested to enable vectorization for this queue or not.

>
>> +		ret = rte_event_eth_rx_adapter_vector_limits_get(
>> +			rx_adapter->eventdev_id, eth_dev_id, &limits);
>> +		if (ret < 0) {
>> +			RTE_EDEV_LOG_ERR("Failed to get event
>device vector limits,"
>> +					 " eth port: %" PRIu16
>> +					 " adapter id: %" PRIu8,
>> +					 eth_dev_id, id);
>> +			return -EINVAL;
>> +		}
>> +		if (queue_conf->vector_sz < limits.min_sz ||
>> +		    queue_conf->vector_sz > limits.max_sz ||
>> +		    queue_conf->vector_timeout_ns <
>limits.min_timeout_ns ||
>> +		    queue_conf->vector_timeout_ns >
>limits.max_timeout_ns ||
>> +		    queue_conf->vector_mp == NULL) {
>> +			RTE_EDEV_LOG_ERR("Invalid event vector
>configuration,"
>> +					 " eth port: %" PRIu16
>> +					 " adapter id: %" PRIu8,
>> +					 eth_dev_id, id);
>> +			return -EINVAL;
>> +		}
>> +		if (queue_conf->vector_mp->elt_size <
>> +		    (sizeof(struct rte_event_vector) +
>> +		     (sizeof(uintptr_t) * queue_conf->vector_sz))) {
>> +			RTE_EDEV_LOG_ERR("Invalid event vector
>configuration,"
>> +					 " eth port: %" PRIu16
>> +					 " adapter id: %" PRIu8,
>> +					 eth_dev_id, id);
>> +			return -EINVAL;
>> +		}
>> +	}
>> +
>>  	if ((cap &
>RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ) == 0 &&
>>  		(rx_queue_id != -1)) {
>>  		RTE_EDEV_LOG_ERR("Rx queues can only be connected
>to single "
>> @@ -2487,83 +2502,6 @@
>rte_event_eth_rx_adapter_queue_del(uint8_t id, uint16_t eth_dev_id,
>>  	return ret;
>>  }
>>
>> -int
>> -rte_event_eth_rx_adapter_queue_event_vector_config(
>> -	uint8_t id, uint16_t eth_dev_id, int32_t rx_queue_id,
>> -	struct rte_event_eth_rx_adapter_event_vector_config *config)
>> -{
>> -	struct rte_event_eth_rx_adapter_vector_limits limits;
>> -	struct rte_event_eth_rx_adapter *rx_adapter;
>> -	struct rte_eventdev *dev;
>> -	uint32_t cap;
>> -	int ret;
>> -
>> -	RTE_EVENT_ETH_RX_ADAPTER_ID_VALID_OR_ERR_RET(id, -
>EINVAL);
>> -	RTE_ETH_VALID_PORTID_OR_ERR_RET(eth_dev_id, -EINVAL);
>> -
>> -	rx_adapter = rxa_id_to_adapter(id);
>> -	if ((rx_adapter == NULL) || (config == NULL))
>> -		return -EINVAL;
>> -
>> -	dev = &rte_eventdevs[rx_adapter->eventdev_id];
>> -	ret = rte_event_eth_rx_adapter_caps_get(rx_adapter-
>>eventdev_id,
>> -						eth_dev_id, &cap);
>> -	if (ret) {
>> -		RTE_EDEV_LOG_ERR("Failed to get adapter caps edev
>%" PRIu8
>> -				 "eth port %" PRIu16,
>> -				 id, eth_dev_id);
>> -		return ret;
>> -	}
>> -
>> -	if (!(cap &
>RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR)) {
>> -		RTE_EDEV_LOG_ERR("Event vectorization is not
>supported,"
>> -				 " eth port: %" PRIu16 " adapter id: %"
>PRIu8,
>> -				 eth_dev_id, id);
>> -		return -EINVAL;
>> -	}
>> -
>> -	ret = rte_event_eth_rx_adapter_vector_limits_get(
>> -		rx_adapter->eventdev_id, eth_dev_id, &limits);
>> -	if (ret) {
>> -		RTE_EDEV_LOG_ERR("Failed to get vector limits edev
>%" PRIu8
>> -				 "eth port %" PRIu16,
>> -				 rx_adapter->eventdev_id, eth_dev_id);
>> -		return ret;
>> -	}
>> -
>> -	if (config->vector_sz < limits.min_sz ||
>> -	    config->vector_sz > limits.max_sz ||
>> -	    config->vector_timeout_ns < limits.min_timeout_ns ||
>> -	    config->vector_timeout_ns > limits.max_timeout_ns ||
>> -	    config->vector_mp == NULL) {
>> -		RTE_EDEV_LOG_ERR("Invalid event vector
>configuration,"
>> -				 " eth port: %" PRIu16 " adapter id: %"
>PRIu8,
>> -				 eth_dev_id, id);
>> -		return -EINVAL;
>> -	}
>> -	if (config->vector_mp->elt_size <
>> -	    (sizeof(struct rte_event_vector) +
>> -	     (sizeof(uintptr_t) * config->vector_sz))) {
>> -		RTE_EDEV_LOG_ERR("Invalid event vector
>configuration,"
>> -				 " eth port: %" PRIu16 " adapter id: %"
>PRIu8,
>> -				 eth_dev_id, id);
>> -		return -EINVAL;
>> -	}
>> -
>> -	if (cap &
>RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT) {
>> -		RTE_FUNC_PTR_OR_ERR_RET(
>> -			*dev->dev_ops-
>>eth_rx_adapter_event_vector_config,
>> -			-ENOTSUP);
>> -		ret = dev->dev_ops-
>>eth_rx_adapter_event_vector_config(
>> -			dev, &rte_eth_devices[eth_dev_id],
>rx_queue_id, config);
>> -	} else {
>> -		rxa_sw_event_vector_configure(rx_adapter,
>eth_dev_id,
>> -					      rx_queue_id, config);
>> -	}
>> -
>> -	return ret;
>> -}
>> -
>>  int
>>  rte_event_eth_rx_adapter_vector_limits_get(
>>  	uint8_t dev_id, uint16_t eth_port_id,
>> diff --git a/lib/librte_eventdev/rte_event_eth_rx_adapter.h
>b/lib/librte_eventdev/rte_event_eth_rx_adapter.h
>> index 7407cde00..3f8b36229 100644
>> --- a/lib/librte_eventdev/rte_event_eth_rx_adapter.h
>> +++ b/lib/librte_eventdev/rte_event_eth_rx_adapter.h
>> @@ -171,9 +171,6 @@ struct rte_event_eth_rx_adapter_queue_conf
>{
>>  	 * The event adapter sets ev.event_type to
>RTE_EVENT_TYPE_ETHDEV in the
>>  	 * enqueued event.
>>  	 */
>> -};
>> -
>> -struct rte_event_eth_rx_adapter_event_vector_config {
>>  	uint16_t vector_sz;
>>  	/**<
>>  	 * Indicates the maximum number for mbufs to combine and
>form a vector.
>> @@ -548,30 +545,6 @@ int
>rte_event_eth_rx_adapter_vector_limits_get(
>>  	uint8_t dev_id, uint16_t eth_port_id,
>>  	struct rte_event_eth_rx_adapter_vector_limits *limits);
>>
>> -/**
>> - * Configure event vectorization for a given ethernet device queue,
>that has
>> - * been added to a event eth Rx adapter.
>> - *
>> - * @param id
>> - *  The identifier of the ethernet Rx event adapter.
>> - *
>> - * @param eth_dev_id
>> - *  The identifier of the ethernet device.
>> - *
>> - * @param rx_queue_id
>> - *  Ethernet device receive queue index.
>> - *  If rx_queue_id is -1, then all Rx queues configured for the ethernet
>device
>> - *  are configured with event vectorization.
>> - *
>> - * @return
>> - *  - 0: Success, Receive queue configured correctly.
>> - *  - <0: Error code on failure.
>> - */
>> -__rte_experimental
>> -int rte_event_eth_rx_adapter_queue_event_vector_config(
>> -	uint8_t id, uint16_t eth_dev_id, int32_t rx_queue_id,
>> -	struct rte_event_eth_rx_adapter_event_vector_config
>*config);
>> -
>>  #ifdef __cplusplus
>>  }
>>  #endif
>> diff --git a/lib/librte_eventdev/version.map
>b/lib/librte_eventdev/version.map
>> index 902df0ae3..34c1c830e 100644
>> --- a/lib/librte_eventdev/version.map
>> +++ b/lib/librte_eventdev/version.map
>> @@ -142,7 +142,6 @@ EXPERIMENTAL {
>>  	#added in 21.05
>>  	rte_event_vector_pool_create;
>>  	rte_event_eth_rx_adapter_vector_limits_get;
>> -	rte_event_eth_rx_adapter_queue_event_vector_config;
>>  };
>>
>>  INTERNAL {
>> --
>> 2.17.1



More information about the dev mailing list