[dpdk-dev] [PATCH] doc: add sampling and mirroring in testpmd guide

[Thomas Monjalon]

25/03/2021 18:10, Ferruh Yigit:
> On 3/9/2021 1:18 PM, Jiawei Wang wrote:
> > Update documentation for sample action usage in testpmd and
> > show the command line example.
> > 
> 
> +1 to document this.
> 
> Indeed for all testpmd flow update, it must be mandatory to update "Flow rules 
> management" section for it, Ori what do you think?
> 
> > Signed-off-by: Jiawei Wang <jiaweiw at nvidia.com>
> > Acked-by: Viacheslav Ovsiienko <viacheslavo at nvidia.com>
> 
> <...>
> 
> > +Sample Sampling/Mirroring rules
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > +
> > +Sample/Mirroring rules can be set by the following commands
> > +
> > +NIC-RX Sampling rule, the matched ingress packets are duplicated and sent to
> > +the queue 1, and each second packets are marked with 0x1234 and sent to
> > +queue 0.
> > +
> 
> Also each second packets duplicated to queue 1, isn't it, because of 'ratio 2'?
> 
> > +::
> > +
> > + testpmd> set sample_actions 0 mark id  0x1234 / queue index 0 / end
> > + testpmd> flow create 0 ingress group 1 pattern eth / end actions
> > +        sample ratio 2 index 0 / queue index 1 / end
> > +
> > +E-Switch Sampling rule, the matched ingress packets are duplicated and sent
> > +to port id 2, and each second packets are sent to eswitch manager.
> > +
> 
> what is 'E-Switch', or "eswitch manager", isn't the mirror rule generic?

This is the HW switch in Mellanox devices.
It should not be mentioned in this generic doc.